Level set (data structures)

Data structure used in image rendering

In computer science, a level set is a data structure designed to represent discretely sampled dynamic level sets of functions.

A common use of this form of data structure is in efficient image rendering. The underlying method constructs a signed distance field that extends from the boundary, and can be used to solve the motion of the boundary in this field.

## Chronological developments

[edit]

The powerful level-set method is due to Osher and Sethian 1988.[1] However, the straightforward implementation via a dense d-dimensional array of values, results in both time and storage complexity of  O ( n d ) {\displaystyle O(n^{d})} , where  n {\displaystyle n} is the cross sectional resolution of the spatial extents of the domain and  d {\displaystyle d} is the number of spatial dimensions of the domain.

### Narrow band

[edit]

The narrow band level set method, introduced in 1995 by Adalsteinsson and Sethian,[2] restricted most computations to a thin band of active voxels immediately surrounding the interface, thus reducing the time complexity in three dimensions to  O ( n 2 ) {\displaystyle O(n^{2})} for most operations. Periodic updates of the narrowband structure, to rebuild the list of active voxels, were required which entailed an  O ( n 3 ) {\displaystyle O(n^{3})} operation in which voxels over the entire volume were accessed. The storage complexity for this narrowband scheme was still  O ( n 3 ) . {\displaystyle O(n^{3}).} Differential constructions over the narrow band domain edge require careful interpolation and domain alteration schemes to stabilise the solution.[3]

### Sparse field

[edit]

This  O ( n 3 ) {\displaystyle O(n^{3})} time complexity was eliminated in the approximate "sparse field" level set method introduced by Whitaker in 1998.[4] The sparse field level set method employs a set of linked lists to track the active voxels around the interface. This allows incremental extension of the active region as needed without incurring any significant overhead. While consistently  O ( n 2 ) {\displaystyle O(n^{2})} efficient in time,  O ( n 3 ) {\displaystyle O(n^{3})} storage space is still required by the sparse field level set method. See[5] for implementation details.

### Sparse block grid

[edit]

The sparse block grid method, introduced by Bridson in 2003,[6] divides the entire bounding volume of size  n 3 {\displaystyle n^{3}} into small cubic blocks of  m 3 {\displaystyle m^{3}} voxels each. A coarse grid of size  ( n / m ) 3 {\displaystyle (n/m)^{3}} then stores pointers only to those blocks that intersect the narrow band of the level set. Block allocation and deallocation occur as the surface propagates to accommodate to the deformations. This method has a suboptimal storage complexity of  O ( ( n m ) 3 + m 3 n 2 ) {\displaystyle O\left((nm)3+m^{3}n^{2}\right)} , but retains the constant time access inherent to dense grids.

### Octree

[edit]

The octree level set method, introduced by Strain in 1999[7] and refined by Losasso, Gibou and Fedkiw,[8] and more recently by Min and Gibou[9] uses a tree of nested cubes of which the leaf nodes contain signed distance values. Octree level sets currently require uniform refinement along the interface (i.e. the narrow band) in order to obtain sufficient precision. This representation is efficient in terms of storage,  O ( n 2 ) , {\displaystyle O(n^{2}),} and relatively efficient in terms of access queries,  O ( log n ) . {\displaystyle O(\log \,n).} An advantage of the level method on octree data structures is that one can solve the partial differential equations associated with typical free boundary problems that use the level set method. The CASL research group[10] has developed this line of work in computational materials, computational fluid dynamics, electrokinetics, image-guided surgery and controls.

### Run-length encoded

[edit]

The run-length encoding (RLE) level set method, introduced in 2004,[11] applies the RLE scheme to compress regions away from the narrow band to just their sign representation while storing with full precision the narrow band. The sequential traversal of the narrow band is optimal and storage efficiency is further improved over the octree level set. The addition of an acceleration lookup table allows for fast  O ( log ⁡ r ) {\displaystyle O(\log r)} random access, where r is the number of runs per cross section. Additional efficiency is gained by applying the RLE scheme in a dimensional recursive fashion, a technique introduced by Nielsen & Museth's similar DT-Grid.[12]

### Hash Table Local Level Set

[edit]

The Hash Table Local Level Set method was introduced in 2011 by Eyiyurekli and Breen [13] and extended in 2012 by Brun, Guittet, and Gibou,[14] only computes the level set data in a band around the interface, as in the Narrow Band Level-Set Method, but also only stores the data in that same band. A hash table data structure is used, which provides an  O ( 1 ) {\displaystyle O(1)} access to the data. However, Brun et al. conclude that their method, while being easier to implement, performs worse than a quadtree implementation. They find that

> as it is, [...] a quadtree data structure seems more adapted than the hash table data structure for level-set algorithms.

Three main reasons for worse efficiency are listed:

1. to obtain accurate results, a rather large band is required close to the interface, which counterbalances the absence of grid nodes far from the interface;
2. the performances are deteriorated by extrapolation procedures on the outer edges of the local grid and
3. the width of the band restricts the time step and slows down the method.

### Point-based

[edit]

This section needs expansion. You can help by adding to it. (December 2009)

|

Corbett in 2005 [15] introduced the point-based level set method. Instead of using a uniform sampling of the level set, the continuous level set function is reconstructed from a set of unorganized point samples via moving least squares.

## References

[edit]

1. ^ Osher, S. & Sethian, J. A. 1988. "Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations". Journal of Computation Physics 79:12–49.
2. ^ Adalsteinsson, D. & Sethian, J. A. 1995. "A fast level set method for propagating interfaces." Journal of Computational Physics. 118(2)269–277.
3. ^ Adalsteinsson, D; Sethian, J (1994). "A fast level set Method for Propagating Interfaces". Journal of Computational Physics. 118 (2): 269. Bibcode:1995JCoPh.118..269A. CiteSeerX 10.1.1.46.1716. doi:10.1006/jcph.1995.1098.
4. ^ Whitaker, R. T. 1998. "A level-set approach to 3d reconstruction from range data." International Journal of Computer Vision. 29(3)203–231.
5. ^ S. Lankton. "Sparse Field Method - Technical Report." April 21, 2009 <http://www.shawnlankton.com/2009/04/sfm-and-active-contours/>
6. ^ Bridson, R. 2003. "Computational aspects of dynamic surfaces (dissertation)." Stanford University, Stanford, California.
7. ^ Strain, J. 1999. "Tree methods for moving interfaces." Journal of Computational Physics. 151(2)616–648.
8. ^ Losasso, F., Gibou, F., & Fedkiw, R. 2004. Simulating water and smoke with an octree data structure. ACM Transactions on Graphics. 23(3)457–462.
9. ^ Min, C. & Gibou, F. 2007. A second order accurate level set method on non-graded adaptive cartesian grids. Journal of Computational Physics. 225(1)300–321.
10. ^ Gibou, Frederic. "Frederic Gibou - Research". UCSB Engineering Department. Archived from the original on 2017-02-03.
11. ^ Houston, B., Nielsen, M., Batty, C., Nilsson, O. & K. Museth. 2006. "Hierarchical RLE Level Set: A Compact and Versatile Deformable Surface Representation." ACM Transactions on Graphics. 25(1).
12. ^ Nielsen, M. B. & Museth K. 2006. "Dynamic Tubular Grid: An efficient data structure and algorithms for high resolution level sets." Journal of Scientific Computing. 26(1) 1–39.
13. ^ Eyiyurekli, M. & Breen, D. 2011. "Data structures for interactive high resolution level-set surface editing," Proc. Graphics Interface. pp. 95-102.
14. ^ Brun, E., Guittet, A. & Gibou, F. 2012. "A local level-set method using a hash table data structure." Journal of Computational Physics. 231(6)2528-2536.
15. ^ Corbett, R. 2005. "Point–Based Level Sets and Progress Towards Unorganised Particle Level Sets (thesis)." University of British Columbia, Canada.