Putty

Common material used as sealant or filler

This article is about the type of material. For the software, see PuTTY. For other uses, see Putty (disambiguation).

Putty is a material with high plasticity, similar in texture to clay or dough, typically used in domestic construction and repair as a sealant or filler. Although some types of putty (typically those using linseed oil) slowly polymerise and become stiff, many putties can be reworked indefinitely, in contrast to other types of filler which typically set solid relatively rapidly.

## Chemical composition

[edit]

Putty, or lime putty, is made from a mixture of calcium oxide (CaO) and water (H2O) in proportions of 38% and 62% by weight respectively, as result, the solution forms hydrated lime (Ca(OH)2) which takes up about a half of the weight.[1]: 59

The other putty mixture may be a calcium carbonate (CaCO3, 750-850 parts) based with an admixture of CaO (ash calcium, 120-180 parts), white cement (40-60 parts), and talc powders in much lower concentrations (fractions).[2]

## Applications

[edit]

### Use in construction

[edit]

Putty has been used extensively in glazing for fixing and sealing panes of glass into wooden frames (or sashes), although its use is decreasing with the prevalence of PVC and metal window frames which use synthetic sealants such as silicone. Glazing putty is traditionally made by mixing a base of whiting (finely ground chalk) with linseed oil in various proportions. Historically, white lead was sometimes mixed with the whiting.[3] There are a number of synthetic alternatives such as polybutene-based putties, where the polybutene is a low molecular weight oligomer replacing the linseed oil. Butyl rubber is also added to the mixture to provide some strength and flexibility.

Painter's putty is typically a linseed oil-based product used for filling holes, minor cracks, and defacements in wood only.

Putties can also be made intumescent, in which case they are used for firestopping as well as for padding of electrical outlet boxes in fire-resistance rated drywall assemblies. In the latter case, hydrates in the putty produce an endothermic reaction to mitigate heat transfer to the unexposed side.

In woodworking, water-based putties are more commonly used, as these emit very little odour, are more easily cleaned up and are compatible with water-based and latex sealers.

### Two-part hardening putties

[edit]

Polyester putty and epoxy putty are thermosetting polymers that can be molded by hand, but become permanently rigid after curing. Pratley Putty is an epoxy putty used primarily for steel bonding. Milliput is another popular multipurpose epoxy putty. Bondo is a polyester-based automotive body filler, which is commonly used in collision repair.

### Plumber's putty

[edit]

Plumber's putty is the common name encompassing a variety of products of completely different compositions, all used for making watertight seals in plumbing.[4][5] It is a pliable substance used to make watertight seals around faucets and drains. The putty is a basic component of a plumber's toolkit and is often used when replacing plumbing fixtures. Plumber's putty formulations vary but commonly include powdered clay and linseed oil. Other formulas use limestone, talc, or fish oil. RTV silicone or epoxy sealants may be used in place of putty.

Plumber's putty contains mineral oils and/or vegetable oils so it can stain porous materials such as marble or some plastics.[6] The oils can also react chemically with some plastics, slowly making them brittle.[7][8]

### Other uses

[edit]

Certain types of putty also have use in the field of terminal ballistics, where the putty can accurately represent the average density of the human body. As such it can be used, for instance, to test the penetrative power of projectiles, or the stopping power of body armour.

Modeling clay and play putty, such as Plasticine and Silly Putty are common toys.

## See also

[edit]

* Blu Tack
* Caulk
* Grain filler
* Rope caulk
* Spackling paste
* Wood putty
* Whitewash

## References

[edit]

Wikimedia Commons has media related to Putty.

1. ^ Hollis, Murray (2005). Practical straw bale building. Collingwood, Vic.: Landlinks Press. ISBN 0-643-09214-5. OCLC 60819915.
2. ^ [1], Yao, Boyu, "Putty Powder Formula", issued 2019-03-21
3. ^ Paul N. Hasluck, Ed., The Handyman's Enquire Within, Cassel and Co., 1908; page 439.
4. ^ Peters, R. (2003). Plumbing Basics. Basics Series. Sterling Publishing Company, Incorporated. p. 21\. ISBN 978-1-4027-1121-3. Retrieved 2021-05-02.
5. ^ Peters, R. (2006). Home How-to Handbook: Plumbing. Sterling Pub. p. 79\. ISBN 978-1-4027-4196-8. Retrieved 2021-05-02.
6. ^ Frechette, L.A. (2004). Remodeling a Bathroom. Build Like a Pro Series. Taunton Press. p. 144\. ISBN 978-1-56158-621-9. Retrieved 2021-05-02.
7. ^ "How To Use Plumbers Putty". Best Plumbers Club. 29 November 2021.
8. ^ Team, Two Make a Home (1 December 2021). "Can plumber's putty be used on plastic?". Two Make a Home.

* "Putty" . Encyclopædia Britannica. Vol. 22 (11th ed.). 1911.
* Putty & Mastic at wiki.DIY FAQ.org.uk

* v
* t
* e

Plumbing

Fundamental
concepts|

* Air gap (plumbing)
* Backflow
* Compatibility (chemical)
* Corrosion
* Drain (plumbing)
* Drinking water
* Fuel gas
* Friction loss
* Grade (slope)
* Greywater
* Heat trap
* Hydrostatic loop
* Leak
* Neutral axis
* Onsite sewage facility
* Pressure
* Sanitary sewer
* Sewer gas
* Sewage
* Sewerage
* Siphon
* Storm sewer
* Stormwater
* Surface tension
* Tap water
* Thermal expansion
* Thermal insulation
* Thermosiphon
* Trap (plumbing)
* Venturi effect
* Wastewater
* Water hammer
* Water supply network
* Water table
* Well

Technology|

* Brazing
* British Standard Pipe (BSP)
* Cast iron pipe
* Chemical drain cleaners
* Compression fitting
* Copper tubing
* Crimp (joining)
* Drain-waste-vent system
* Ductile iron pipe
* Flare fitting
* Garden Hose Thread (GHT)
* Gasket
* Hydronics
* Leak detection
* National Pipe Thread (NPT)
* Nominal Pipe Size (NPS)
* O-ring
* Oakum
* Pipe (fluid conveyance)
* Pipe dope
* Pipe support
* Plastic pipework
* Push-to-pull compression fittings
* Putty
* Sealant
* Sewage pumping
* Soldering
* Solvent welding
* Swaging
* Thread seal tape
* Threaded pipe
* Tube bending
* Water heat recycling

Components|

* Atmospheric vacuum breaker
* Automatic bleeding valve
* Automatic faucet
* Backflow prevention device
* Ball valve
* Bleed screw
* Booster pump
* Butterfly valve
* Check valve
* Chemigation valve
* Chopper pump
* Circulator pump
* Cistern
* Closet flange
* Concentric reducer
* Condensate pump
* Coupling (piping)
* Diaphragm valve
* Dielectric union
* Double check valve
* Eccentric reducer
* Expansion tank
* Faucet aerator
* Float switch
* Float valve
* Floor drain
* Flow limiter
* Flushing trough
* Flushometer
* Gate valve
* Globe valve
* Grease trap
* Grinder pump
* Hose coupling
* Manifold
* Needle valve
* Nipple (plumbing)
* Pinch valve
* Piping and plumbing fitting
* Plug (sanitation)
* Pressure regulator
* Pressure vacuum breaker
* Pressure-balanced valve
* Pump
* Radiator (heating)
* Reduced pressure zone device
* Reducer
* Relief valve
* Riser clamp
* Rooftop water tower
* Safety valve
* Sewage pump
* Street elbow
* Submersible pump
* Tap (valve)
* Thermostatic mixing valve
* Trench drain
* Vacuum breaker
* Vacuum ejector
* Valve
* Water tank
* Zone valve

Plumbing fixtures|

* Accessible bathtub
* Bathtub
* Bidet
* Dehumidifier
* Dishwasher
* Drinking fountain
* Electric water boiler
* Evaporative cooler
* Flush toilet
* Garbage disposal unit
* Hot water storage tank
* Humidifier
* Icemaker
* Instant hot water dispenser
* Laundry tub
* Shower
* water recycling shower
* Sink
* Storage water heater
* Sump pump
* Tankless water heater
* Urinal
* Washing machine
* Washlet
* Water dispenser
* Water filter
* Water heater
* Water softener

Specialized tools|

* Basin wrench
* Blowtorch
* Borescope
* Core drill
* Drain cleaner
* Driving cap
* Flare-nut wrench
* Pipecutter
* Pipe wrench
* Plumber's snake
* Plumber wrench
* Plunger
* Strap wrench
* Tap and die

Measurement
and control|

* Control valve
* Flow sensor
* Pressure sensor
* Water detector
* Water metering

Professions,
trades,
and services|

* Hydronic balancing
* Hydrostatic testing
* Leak detection
* Mechanical, electrical, and plumbing
* Pipe marking
* Pipefitter
* Pipelayer
* Plumber

Industry
organizations
and standards|

* International Association of Plumbing and Mechanical Officials (IAPMO)
* NSF International
* Plumbing & Drainage Institute (PDI)
* Uniform Plumbing Code (UPC)
* World Plumbing Council (WPC)

Health and safety|

* Plumbing code
* Scalding
* Waterborne disease

See also|

* Fire sprinkler system
* Piping
* Template:HVAC
* Template:Public health
* Template:Sewerage
* Template:Toilets
* Template:Wastewater

Authority control databases: National |

* Czech Republic

|

*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template