Relaxation length

Property of pneumatic tires

Plot showing lateral force building up as a bicycle tire rolls forward at a 2.4º slip angle. The results from three separate test runs are superimposed.

Relaxation length is a property of pneumatic tires that describes the delay between when a slip angle is introduced and when the cornering force reaches its steady-state value.[1] It is also described as the distance that a tire rolls before the lateral force builds up to 63% of its steady-state value.[2] It can be calculated as the ratio of cornering stiffness over the lateral stiffness, where cornering stiffness is the ratio of cornering force over slip angle, and lateral stiffness is the ratio of lateral force over lateral displacement.[1]

## Values

[edit]

Pacejka gives a rule of thumb that "at nominal vertical load the relaxation length is of the order of magnitude of the wheel radius".[1] Relaxations lengths have been found to be between 0.12 and 0.45 meters, with higher values corresponding to higher velocities and heavier loads.[2] Tests on motorcycle tires have found that the ratio of cornering stiffness over lateral stiffness produces values 20-25% higher than those calculated as 63% of the steady state-value.[3] The relaxation length associated with camber thrust has been found to be nearly zero.[2]

## Importance

[edit]

A tire's relaxation length controls how much the tire will contribute to speed wobble.[4]

## See also

[edit]

* Bicycle and motorcycle dynamics
* Pneumatic trail
* Vehicle dynamics

## References

[edit]

1. ^ a b c Pacejka, Hans B. (2006). Tyre and vehicle dynamics (2nd ed.). SAE International. p. 22\. ISBN 978-0-7680-1702-1. "The relaxation length ... is an important parameter that controls the lag of the response of the side force to the input slip angle."
2. ^ a b c Cossalter, Vittore (2006). Motorcycle Dynamics (Second ed.). Lulu.com. p. 58\. ISBN 978-1-4303-0861-4. "The relaxation length represents the distance the wheel has to cover in order for the lateral force to reach 63% of the steady state force."
3. ^ R.T. Uil (June 2006). "Non-lagging effect of motorcycle tyres: An experimental study with the Flat Plank Tyre Tester" (PDF). Eindhoven University of Technology, Department of Mechanical Engineering. p. 14. Retrieved 2010-10-31. "For the relaxation behaviour of motorcycle tyres, it can be concluded that the relaxation length for side slip defined by Pacejka is higher than the relaxation length determined from the steady-state side force."
4. ^ Peter Willem Anton Zegelaar (March 1998). "The Dynamic Response of Tyres to Brake Torque Variations and Road Unevennesses" (PDF). Delft University of Technology. p. 16\. Archived from the original (PDF) on 2013-10-04. Retrieved 2013-10-02. "the relaxation length plays an important role in the 'shimmy' phenomenon."

* v
* t
* e

Tires

Types|

* Tubeless tire
* Radial tire
* Low rolling resistance tire
* Run-flat tire
* Michelin PAX System
* Airless tire
* Tweel
* Rain tyre
* Snow tire
* All-terrain tire
* Bar grip
* Knobby tire
* Large tire
* Mud-terrain tire
* Paddle tire
* Orange oil tires
* Whitewall tire
* Aircraft tire
* Tundra tire
* Bicycle tire
* Tubular tire
* Lego tire
* Motorcycle tyre
* Tractor tire
* Racing slick
* Formula One tyres
* Spare tire
* Continental tire

Components|

* Bead
* Beadlock
* Tread
* Siping (rubber)
* Valve stem
* Dunlop valve
* Presta valve
* Schrader valve

Attributes|

* Camber thrust
* Circle of forces
* Cold inflation pressure
* Contact patch
* Cornering force
* Ground pressure
* Pacejka's Magic Formula
* Pneumatic trail
* Relaxation length
* Rolling resistance
* Self aligning torque
* Slip angle
* Steering ratio
* Tire balance
* Tire load sensitivity
* Tire uniformity
* Lateral Force Variation
* Radial Force Variation
* Traction (engineering)
* Treadwear rating

Behaviors|

* Aquaplaning
* Groove wander
* Slip (vehicle dynamics)
* Tramlining

Maintenance|

* Tire maintenance
* Tire rotation
* Bicycle pump
* Central Tire Inflation System
* Tire mousse
* Tire-pressure monitoring system
* Tire-pressure gauge
* Direct TPMS
* Bead breaker
* Tire changer
* Tire manipulator
* Tire iron

Life cycle|

* Tire manufacturing
* List of tire companies
* Retread
* Waste tires
* Tire recycling
* Tire fire
* Blowout
* Flat tire
* Ozone cracking

Organizations|

* European Tyre and Rim Technical Organisation
* Tire Society
* Tire Science and Technology

Identification|

* Tire code
* Plus sizing
* Tire label
* Uniform Tire Quality Grading (UTQG)

* Outline of tires
* Category

*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template