Rig (sailing)

Arrangement of a ship's masts, sails, and ropes

Rigging of a sailing frigate

A sailing vessel's rig is its arrangement of masts, sails and rigging.[1] Examples include a schooner rig, cutter rig, junk rig, etc.[2] A rig may be broadly categorized as "fore-and-aft", "square", or a combination of both. Within the fore-and-aft category there is a variety of triangular and quadrilateral sail shapes. Spars or battens may be used to help shape a given kind of sail. Each rig may be described with a sail plan—formally, a drawing of a vessel, viewed from the side.

Modern examples of single-person sailing craft, such as windsurfers, iceboats, and land-sailing craft, typically have uncomplicated rigs with a single sail on a mast with a boom.

## Introduction

[edit]

In the English language, ships were usually described, until the end of the eighteenth century, in terms of their type of hull design. Using the type of rig as the main type identifier for a vessel became common only in the nineteenth century.[3]: 29  This is illustrated by the terminology for ships in the large fleet of colliers that traded to London from the coal ports of the Northeast of England (of which HMS Endeavour was a well-known example). Many of these full-rigged ships (square rigged on all of three masts) had the hull type "bark" – another common classification was "cat". In the second half of the eighteenth century, the square sails on the mizzen were often eliminated. The resulting rig acquired the name of the hull type: initially as "bark" and soon as "barque". This explains the Royal Navy's description of Endeavour as a "cat-built bark".[3]: 51, 57-61

## Design

[edit]

Sail plan of a sloop

Each rig may be described with a sail plan—a drawing of a vessel, viewed from the side, depicting its sails, the spars that carry them and some of the rigging that supports the rig.[4] By extension, "sail plan" describes the arrangement of sails on a vessel.[5][6] A well-designed sail plan should be balanced, requiring only light forces on the helm to keep the sailing craft on course. The fore-and-aft center of effort on a sail plan is usually slightly behind the center of resistance of the hull,[a] so that the sailing craft will tend to turn into the wind if the helm is unattended.[7] The height of the sail plan's center of effort above the surface is limited by the sailing craft's ability to avoid capsize, which is a function of its hull shape, ballast, or hull spacing (in the case of catamarans and trimarans).[8]

### Types of rig

[edit]

* Fore-and-aft rig features sails that run fore and aft (along the length of the sailing craft), controlled by lines called "sheets", that changes sides, as the bow passes through the wind from one side of the craft to the other. Fore-and-aft rig variants include:
* Bermuda rig (also known as a Marconi rig) features a three-sided mainsail.
* Gaff rig features a four-sided mainsail with the upper edge made fast to a spar called a gaff.[9]
* Spritsail rig features a four-sided mainsail with the aft upper corner supported by a diagonal spar, called a sprit, whose lower end meets the mast near the foot of the sail.
* Lateen rig features a three-sided sail set on a long yard, mounted at an angle on the mast and running in a fore-and-aft direction.
* Crab claw sail (also known as Oceanic sprit or Oceanic lateen) features a three-sided sail with spars on both the foot and the head. It's either mastless, supported by a "prop", or mounted on removable or fixed masts.
* Tanja sail (also known as canted square/rectangular sail, balance lugsail, or boomed lugsail) features a four-sided sail with spars on both the foot and the head. It's mounted on removable or fixed masts.
* Square rig uses square sails as the major sails on a vessel. It is common for square rigged vessels to include some fore and aft sails, such as staysails. A mast may be referred to as a square rigged mast where square sails predominate – this would differentiate from other masts on the same vessel being fore-and-aft rigged, for example in a barque.
Square sails are generally suspended from yards which, when at rest, are at right angles ("square") to the centre-line of the vessel. This differentiates them from fore-and-aft sails, which are aligned along the centre-line when at rest.[10]: 2  Operationally, this means that square sails always present the same surface of the sail to the wind when propelling a vessel forward: they have a front and a back. Fore-and-aft sails can have either of their surfaces facing the wind when in use. Hence either vertical edge of a square sail may be the front (when sailing to windward) but fore-and-aft sails always have the same vertical edge at the front.

### Types of sail

[edit]

Each form of rig requires its own type of sails. Among them are:

* A staysail (pronounced stays'l) is a fore-and-aft sail whose leading edge (or luff) is hanked to a stay.
* A headsail is any sail forward of the foremost mast on a sailing boat. It is usually a fore-and-aft sail, but on older sailing ships would include a square-sail on a bowsprit.[11]
* A jib is a headsail that is set in front of any other headsails, or in modern usage, may be the only headsail. It may be hanked to a stay, used in roller reefing or set flying (as in the more traditional cutter rigs).[12]: 28–29  In a large vessel with many headsails, you may, for example, find a flying jib, outer-jib, inner-jib and then the fore-staysail.[10]: 64, 94
* A genoa is a large jib that increases area by extending rearward of the mast.
* A spinnaker is a full sail of light material for use when sailing downwind in light airs. When in use, the jib or genoa would be lowered.
* A gennaker is a sail that is a cross between a genoa and a spinnaker.
* A mainsail ("mains'l") is a sail attached to the main mast. The principal types include:
1. A square-rig mainsail is a square sail attached at the bottom of the main mast.
2. A Bermuda-rig mainsail is a triangular sail with the luff attached to the mast with the foot or lower edge generally attached to a boom.
3. A gaff-rig mainsail is a quadrilateral sail whose head is supported by a gaff.
4. A spritsail-rig mainsail is a quadrilateral sail whose aft head is supported by a sprit.
* A lug sail is an asymmetric quadrilateral sail suspended on a spar and hoisted up the mast as a fore-and-aft sail.
* A mizzen sail is a small triangular or quadrilateral sail at the stern of a boat.
* A steadying sail is a mizzen sail on motor vessels such as old-fashioned drifters and navy ships (such as HMS Prince Albert). The sail's prime function is to reduce rolling rather than to provide drive.

* Quadrilateral examples
* A square sail is loose-footed, but may be attached to a spar, below.

* A junk sail has multiple transverse battens.

* A lugsail has a tall asymmetrical shape.

* A settee sail has an elongated asymmetrical shape.

* A gaff rigged sail has a spar above and a boom below.

* A gunter rig has a vertical spar that extends vertically above the mast.

* Triangular examples
* A bermuda rigged sail has one edge attached to the mast.

* A lateen sail is loose-footed.

* A crabclaw sail has spars along two sides.

* Spinnakers are attached at their corners.

* Staysails include jibs.

## European and American vessels

[edit]

Ships that sailed from Europe and the Americas could be categorized in a variety of ways, by number of masts and by sailing rig.

Single-masted sailing vessels include the catboat, cutter and sloop. Two-masted vessels include the bilander, brig, brigantine, ketch, schooner, snow, and yawl. Three-masted vessels include the barque, barquentine, polacre and full-rigged ship. Luggers could have one or two masts and schooners could have two or more masts.

### Square-rigged masts

[edit]

Hierarchy of possible sails on a square rigged mast

A three-masted vessel has, from front to back, a foremast, mainmast and mizzenmast. A two-masted vessel has a mainmast, the other being a foremast or mizzen. Ships with more than three masts may simply number them or use another scheme, as with the five-masted Preussen.

On a square-sailed vessel, the sails of each mast are named by the mast and position on the mast. For instance, on the mainmast (from bottom to top):

* main course
* main topsail
* main topgallant ("t'gallant")
* main royal
* main skysail
* main moonraker.[b]

On many ships, sails above the top (a platform just above the lowest sail on the fore, main and mizzens masts) were mounted on separate mast segments—"topmasts" or "topgallant masts"—held in wooden sockets called "trestletrees". These masts and their stays could be rigged or struck as the weather conditions required, or for maintenance and repair.[13]

In light breezes, the working square sails would be supplemented by studding sails ("stuns'l") out on the ends of the yardarms. These were called as a regular sail, with the addition of "studding". For example, the main top studding sail.[13]

Between the main mast and mizzen as well as between main mast and foremast, the staysails between the masts are named from the sail immediately below the highest attachment point of the stay holding up that staysail. Thus, the mizzen topgallant staysail can be found dangling from the stay leading from above the mizzen (third) mast's topgallant sail (i.e., from the mizzen topgallant yard) to at least one and usually two sails down from that on the main mast (the slope of the top edge of all staysail lines runs from a higher point nearer the stern to a lower point towards the bow).[13]

The jibs (the staysails between the foremast and the bowsprit) are named (from inner to outer most) fore topmast staysail (or foretop stay), inner jib, outer jib and flying jib. Many of the jibs' stays meet the foremast just above the fore topgallant. A fore royal staysail may also be set.[13]

## Austronesian and East Asian vessels

[edit]

See also: Austronesian vessels

* Traditional Austronesian generalized sail types. C, D, E, and F are types of crab claw sails. G, H, and I are tanja sails.[14]
A Double sprit (Sri Lanka)
B Common sprit (Philippines)
C Oceanic sprit (Tahiti)
D Oceanic sprit (Marquesas)
E Oceanic sprit (Philippines)
F Crane sprit (Marshall Islands)
G Rectangular boom lug (Maluku Islands)
H Square boom lug (Gulf of Thailand)
I Trapezial boom lug (Vietnam)

Austronesian rigs include what are generally called crab claw (also misleadingly called the "oceanic lateen" or the "oceanic sprit") and tanja rigs. They were used for double-canoe (catamaran), single-outrigger (on the windward side), or double-outrigger boat configurations, in addition to monohulls.[15][16] These rigs were independently developed by the Austronesian peoples during the Neolithic, beginning with the crab claw sail at around 1500 BCE. They are used throughout the range of the Austronesian Expansion, from Maritime Southeast Asia, to Micronesia, Island Melanesia, Polynesia, and Madagascar.[17]

### Crab claw

[edit]

Main article: Crab claw sail

See also: Proa

There are several distinct types of crab claw rigs, but unlike western rigs, they do not have fixed conventional names.[18] Crab claw sails are rigged fore-and-aft and can be tilted and rotated relative to the wind. They evolved from V-shaped perpendicular square sails in which the two spars converge at the base of the hull. The simplest form of the crab claw sail (also with the widest distribution) is composed of a triangular sail supported by two light spars (sometimes erroneously called "sprits") on each side. They were originally mastless, and the entire assembly was taken down when the sails were lowered.[17]

The need to propel larger and more heavily laden boats led to the increase in vertical sail. However this introduced more instability to the vessels. In addition to the unique invention of outriggers to solve this, the sails were also leaned backwards and the converging point moved further forward on the hull. This new configuration required a loose "prop" in the middle of the hull to hold the spars up, as well as rope supports on the windward side. This allowed more sail area (and thus more power) while keeping the center of effort low and thus making the boats more stable. The prop was later converted into fixed or removable canted masts where the spars of the sails were actually suspended by a halyard from the masthead. This type of sail is most refined in Micronesian proas which could reach very high speeds. These configurations are sometimes known as the "crane sprit" or the "crane spritsail".[17][18]

Another evolution of the basic crab claw sail is the conversion of the upper spar into a fixed mast. In Polynesia, this gave the sail more height while also making it narrower, giving it a shape reminiscent of crab pincers (hence "crab claw" sail). This was also usually accompanied by the lower spar becoming more curved.[17][18]

Micronesian, Island Melanesian, and Polynesian single-outrigger vessels also used the canted mast configuration to uniquely develop shunting.[17] In shunting vessels, both ends are alike, and the boat is sailed in either direction, but it has a fixed leeward side and a windward side. The boat is shunted from beam reach to beam reach to change direction, with the wind over the side, a low-force procedure. The bottom corner of the crab claw sail is moved to the other end, which becomes the bow as the boat sets off back the way it came. The mast usually hinges, adjusting the rake or angle of the mast. The crab claw configuration used on these vessels is a low-stress rig, which can be built with simple tools and low-tech materials, but it is extremely fast. On a beam reach, it may be the fastest simple rig.

* Crab claw examples
* Melanesian V-shaped square sail

* New Zealand V-shaped square sail

* Polynesian crab claw sail

* New Guinea crab claw sail

* Hawaiian crab claw sail with the upper spar merged with the fixed mast

### Tanja

[edit]

Main article: Tanja sail

The conversion of the prop to a fixed mast in the crab claw sail led to the much later invention of the tanja sail (also known variously and misleadingly as the canted square sail, canted rectangular sail, boomed lugsail, or balance lugsail). Tanja sails were rigged similarly to crab claw sails and also had spars on both the head and the foot of the sails; but they were square or rectangular with the spars not converging into a point.[17][18] They are generally mounted on one or two (rarely three or more) bipod or tripod masts, usually made from thick bamboo.[19][20][21] The masts have curved heads with grooves for attaching the halyards. The lower part of two of the bamboo poles of the mast assembly have holes that are fitted unto the ends of a cross-wise length of timber on the deck, functioning like a hinge. The forward part of the mast assembly had a forelock. By unlocking it, the mast can be lowered across the ship.[19]

Despite the similarity of its appearance to western square rigs, the tanja is a fore-and-aft rig similar to a lugsail. The sail was suspended from the upper spar ("yard"), while the lower spar functioned like a boom.[19] When set fore-and-aft, the spars extend forward of the mast by about a third of their lengths. When running before the wind, they are set perpendicular to the hull, similar to a square rig.[22] The sail can be rotated around the mast (lessening the need for steering with the rudders) and tilted to move the center of pull forward or aft. The sail can even be tilted completely horizontally, becoming wing-like, to lift the bow above incoming waves. The sail is reefed by rolling it around the lower spar.[19]

In addition to the tanja sails, ships with the tanja rigs also have bowsprits set with a quadrilateral headsail, sometimes also canted as depicted in the Borobudur ships.[22] In the colonial era, these were replaced by triangular western-style jibs (often several in later periods), and the tanja sails themselves were slowly replaced with western rigs like gaff rigs.[19]

* Tanja examples
* Iranun lanong with three tanja sails on a combination of single and tripod masts

* Makassar benawa with tanja sails on removable tripod masts and a jib

* Makassar padewakang with tanja sails on bipod masts

* Micronesian catamaran with tanja sails on single fixed masts

### Junk

[edit]

Main article: Junk rig

See also: Djong and Junk (ship)

The oldest undisputed depiction of the junk rig is from the Bayon temple (c. 12th to 13th century) of Angkor Thom, Cambodia, which shows a ship with a keel and a sternpost and identifies it as Southeast Asian.[23]: 188–189 : 458 [24] Historians Paul Johnstone and Joseph Needham suggest an Austronesian (specifically Indonesian) origin of the rig.[25]: 179 [26]: 599, 612–613 [27]: 191–192  Junk rigs were adopted by the Chinese by around the 12th century.[28] Iconographic remains show that Chinese ships before the 12th century used square sails.[29]: 456–457, plate CDIII–CDVI  It also further diffused into other East Asian shipbuilding traditions, notably Japan.[30]

In its most traditional form the junk rig is carried on an unstayed mast (i.e. a mast without shrouds or stays, supported only on the step at the keelson and the partners); however, standing rigging of some kind is not uncommon. It is typical to run the halyards (lines used to raise and lower the sail) and sheets (lines used to trim the sail) to the companionway on a junk-rigged boat. This means that typical sailhandling can be performed from the relative safety of the cockpit, or even while the crew is below deck.[citation needed]

Junk sails are typically carried on a mast which rakes (slants) forward a few degrees from vertical. This causes the sail to swing outwards, absent wind pushing it, which makes the use of a preventer (a line to keep the sail extended) unnecessary.[citation needed]

* Junk examples
* Southeast Asian djongs (D'Eerste Boeck, c. 1599) with both tanja and junk rigs

* Qing dynasty Chinese junk (chuán) (c. 18th century), note the partially reefed sails

* Malay pinas

* Tagalog balación

* Japanese kai-sen

## South Asian and Middle Eastern vessels

[edit]

Main articles: Dhow and Felucca

### Dhow

[edit]

Unlike European ships, South Asian and Middle Eastern vessels are not named based on the type of rigging, but are named based on hull shapes. All of them are rigged similarly, and thus most of these vessels are classified as dhows in European terminology. Dhows are believed to have originated from India. They have loose-footed quadrilateral settee sails (sometimes also fully triangular lateen sails). The sails could not be reefed, instead two main sails were usually carried by the ship, one for night and bad weather, and another for daytime and fair weather. The yard was usually very long in comparison to the actual length of the boat, and they are sometimes made of two pieces of timber joined by a strengthening piece. The halyard was threaded into two holes on the yard to prevent it slipping along the length. The mast was slotted into a mast step fitted over the deck.[31]

## Gallery

[edit]

Presented alphabetically by section:

### Fore-and-aft

[edit]

* Catboat: single mast and sail, usually gunter- or gaff-rigged

* Cutter: single mast with gaff-rigged mainsail, two headsails, and a gaff topsail above the gaff.

* Dhow: single unstayed mast with lateen sail

* Felucca: one to three lateen rigged masts

* Gunter: sloop with gunter rig

* Junk: one or more junk-rigged masts

* Ketch: two masts with mizzen mast before the tiller

* Lugger: two-masted lug rig

* Proa: single mast with crab claw sail

* Schooner: two or more fore-and-aft rigged masts, first mast no taller than the second

* Sloop: single mast with a gaff-rigged mainsail and topsail on the mainmast

* Yawl: two masts with mizzen mast aft of the tiller

### Square

[edit]

With square sails on every mast

* Brig: two square-rigged masts and headsails

* Fully rigged ship: three or more (all) square-rigged masts and headsails

### Combination

[edit]

With some masts having exclusively fore-and-aft sails

* Barque: two or more square-rigged masts and headsails with fore-and-aft rigged aftmost mast

* Barquentine: one square-rigged mast (fore) and two or more fore-and-aft rigged (main, mizzen, etc.) masts

* Bilander: two masts, main mast course sail lateen rigged, all others square rigged

* Schooner brig: one square-rigged foremast and one fore-and-aft rigged main mast

* Brigantine: one square-rigged foremast and hybrid rigged main mast

* Polacre: one square-rigged main with headsails and two lateen rigged aft masts

* Topsail schooner: two schooner-rigged masts with one or more square-rigged topsails

* Snow: headsails, two square-rigged masts, and a third smaller 'snow-mast' with a trysail

## See also

[edit]

* Glossary of nautical terms (A-L)
* Glossary of nautical terms (M-Z)
* Kite rig

## Notes

[edit]

1. ^ Note: not all sailing craft are boats; land yachts have wheels and ice yachts have runners. For the sake of clarity, this article will generally address only waterborne craft.
2. ^ Since the early nineteenth century, the topsails and topgallants are often split into a lower and an upper sail to allow them to be more easily handled. This makes the mast appear to have more "sails" than it officially has.

## References

[edit]

1. ^ "Rig". Merriam-Webster Dictionary. 2023. Retrieved 2023-04-15. "the distinctive shape, number, and arrangement of sails and masts of a ship or to fit out with rigging"
2. ^ Kemp, Dixon (1882). A Manual of Yacht and Boat Sailing. H. Cox. p. 559.
3. ^ a b MacGregor, David R (1985). Merchant Sailing Ships 1775-1815: Sovereignty of Sail. London: Conway Maritime Press. ISBN 0-85177-323-0.
4. ^ "Sail plan". Collins English Dictionary. 2023.
5. ^ Folkard, Henry Coleman (2012). Sailing Boats from Around the World: The Classic 1906 Treatise. Dover Maritime. Courier Corporation. p. 576\. ISBN 9780486311340.
6. ^ Committee, Cruising Club of America Technical (1987). Desirable and Undesirable Characteristics of Offshore Yachts. W. W. Norton & Company. p. 161\. ISBN 978-0-393-03311-3.
7. ^ Royce, Patrick M. (1997). Royce's Sailing Illustrated. ProStar Publications. p. 74\. ISBN 978-0-911284-07-2.
8. ^ Killing, Steve; Hunter, Douglas (1998). Yacht Design Explained: A Sailor's Guide to the Principles and Practice of Design. W. W. Norton & Company. p. 153\. ISBN 978-0-393-04646-5.
9. ^ Leather, John (2001-01-11). The Gaff Rig Handbook: History, Design, Techniques, Developments. WoodenBoat Books. ISBN 978-0-937822-67-8.
10. ^ a b Underhill, Harold (1946) [1938]. Masting and Rigging, the Clipper Ship and Ocean Carrier (1958 reprint ed.). Glasgow: Brown, Son and Ferguson, Ltd.
11. ^ "Definition of 'headsail'". Collins. Retrieved 12 May 2019.
12. ^ Cunliffe, Tom (2016). Hand, Reef and Steer: Traditional Sailing Skills for Classic Boats (second ed.). Adlard Coles. ISBN 978-1472925220.
13. ^ a b c d Nares, George Strong (1897). Seamanship: Including Names of Principal Parts of a Ship. Griffin & Company. pp. 106–256.
14. ^ Doran, Edwin B. (1981). Wangka: Austronesian Canoe Origins. Texas A&M University Press. ISBN 9780890961070.
15. ^ Horridge A (2008). "Origins and Relationships of Pacific Canoes and Rigs" (PDF). In Di Piazza A, Pearthree E (eds.). Canoes of the Grand Ocean. BAR International Series 1802. Archaeopress. ISBN 9781407302898. Archived (PDF) from the original on 26 July 2020. Retrieved 22 October 2019.
16. ^ Lacsina, Ligaya (2016). Examining pre-colonial Southeast Asian boatbuilding: An archaeological study of the Butuan Boats and the use of edge-joined planking in local and regional construction techniques (PhD). Flinders University.
17. ^ a b c d e f Campbell, I.C. (1995). "The Lateen Sail in World History". Journal of World History. 6 (1): 1–23\. JSTOR 20078617.
18. ^ a b c d Horridge, Adrian (April 1986). "The Evolution of Pacific Canoe Rigs". The Journal of Pacific History. 21 (2): 83–99\. doi:10.1080/00223348608572530. JSTOR 25168892.
19. ^ a b c d e Pelras, Christian (1997). The Bugis. John Wiley & Sons. pp. 258–259\. ISBN 9780631172314.
20. ^ Burningham, Nick (2019). "Shipping of the Indian Ocean World". In Schottenhammer, Angela (ed.). Early global interconnectivity across the Indian Ocean world. Volume 2: Exchange of ideas, religions, and technologies. Palgrave Macmillan. pp. 141–202\. ISBN 9783319978017.
21. ^ Chaudhuri, K.N. (1985). Trade and Civilisation in the Indian Ocean: An Economic History from the Rise of Islam to 1750. Cambridge University Press. p. 152\. ISBN 9780521285421.
22. ^ a b Paine, Lincoln (2013). The Sea and Civilization: A Maritime History of the World. Knopf Doubleday Publishing Group. p. 286\. ISBN 9780307962256.
23. ^ Burningham, Nick (2019). "Chapter 6: Shipping of the Indian Ocean World". In Schottenhammer, Angela (ed.). Early Global Interconnectivity across the Indian Ocean World, Volume II: Exchange of Ideas, Religions, and Technologies. Cham: Palgrave Macmillan. pp. 141–201.
24. ^ Inglis, Douglas Andrew (2014). The Borobudur Vessels in Context (Thesis). Texas A&M University.
25. ^ Jett, Stephen C. (2017). Ancient Ocean Crossings: Reconsidering the Case for Contacts with the Pre-Columbian Americas. Tuscaloosa: University of Alabama Press. ISBN 9780817319397.
26. ^ Needham, Joseph (1971). Science and Civilisation in China: Volume 4, Physics and Physical Technology, Part III: Civil Engineering and Nautics. Cambridge: Cambridge University Press.
27. ^ Johnstone, Paul (1980). The Seacraft of Prehistory. Cambridge: Harvard University Press. ISBN 978-0674795952.
28. ^ L. Pham, Charlotte Minh-Hà (2012). Asian Shipbuilding Technology. Bangkok: UNESCO Bangkok Asia and Pacific Regional Bureau for Education. pp. 20–21\. ISBN 978-92-9223-413-3. Retrieved 15 February 2023.
29. ^ Needham, Joseph (1971). Science and Civilisation in China: Volume 4, Physics and Physical Technology, Part III: Civil Engineering and Nautics. Cambridge: Cambridge University Press.
30. ^ Crossley, Pamela Kyle, Daniel R. Headrick, Steven W. Hirsch, Lyman L. Johnson, and David Northrup. "Song Dynasty." The Earth and Its Peoples. By Richard W. Bulliet. 4th ed. Boston: Houghton Mifflin, 2008. 279–80. Print.
31. ^ "History and Construction of the Dhow". Nabatea.net. Retrieved 21 May 2024.

## Further reading

[edit]

* Bolger, Philip C. (1998). 103 Sailing Rigs "Straight Talk". Gloucester, Maine: Phil Bolger & Friends, Inc. ISBN 0-9666995-0-5.
* Moore, Sir Alan Hilary; Nance, R. Morton (1925). Last days of mast & sail : An Essay in Nautical Comparative Anatomy. Clarendon Press, Oxford. OL 26571876M.

## External links

[edit]

Wikimedia Commons has media related to Sail-plan.

* v
* t
* e

Types of sailing vessels and rigs

Overviews|

* Age of Sail
* Maritime history
* Age of Discovery

Sailing rigs|

* Bermuda rig
* Crab claw
* Fore-and-aft rig
* Gaff rig
* Gunter rig
* Junk rig
* Lateen rig
* Ljungström rig
* Lug rig
* Mast aft rig
* Pinisi rig
* Square rig
* Tanja rig

By sailing rigs|

* Barque
* Barquentine
* Brig
* Brigantine
* Catboat
* Cutter
* Full-rigged ship
* Jackass-barque
* Ketch
* Mistico
* Schooner
* Sloop
* Snow
* Yawl

Multihull vessels|

* ʻalia
* Amatasi
* Baurua
* Bigiw
* Camakau
* Catamaran
* Drua
* Guilalo
* Jukung
* Kaep
* Kalia
* Karakoa
* Kora kora
* Lakatoi
* Lanong
* Outrigger canoe
* Pahi
* Paraw
* Pentamaran
* Proa
* Quadrimaran
* Takia
* Tepukei
* Tipairua
* Tongiaki
* Trimaran
* Ungalawa
* Va'a-tele
* Vaka katea
* Vinta
* Wa

Naval and merchant
sailing ships
and other vessels
(by origin date)|

| Ancient|

* Balangay
* Boita
* Borobudur ship
* Dhow
* Fire ship
* Galley
* Penteconter
* Bireme
* Trireme
* Quadriremes
* Tessarakonteres
* Dromon
* Junk
* K'un-lun po
* Lepa
* Mtepe
* Uru

|

Post-classical|

* Balinger
* Benawa
* Birlinn
* Bomb vessel
* Cog
* Hulk
* Jong
* Knarr
* Koch
* Kondura
* Longship
* Malangbang
* Shitik
* Tongkang
* Zabra

15th c.|

* Carrack
* Chinese treasure ship
* Caravel
* Ghurab
* Lancaran
* Hoy
* Trabaccolo

16th c.|

* Crommesteven
* Galiot
* Galleon
* Galleass
* Ghali
* Flyboat
* Fluyt
* Full-rigged pinnace
* Lorcha
* Man-of-war
* Manchua
* Panokseon
* Patache
* Speronara
* Square-rigged caravel (round or de armada)
* Xebec

17th c.|

* Bermuda sloop
* Corvette
* Frigate
* Galeas
* Koff
* Pink
* Polacca
* Ship of the line

18th c.|

* Bilander
* Chialoup
* Chinaman
* Baltimore Clipper
* East Indiaman
* Gallivat
* Garay
* Grab
* Gundalow
* Lanong
* Padewakang
* Post ship
* 74-gun
* Ship of the line
* Sloop-of-war
* Toop
* Trincadour
* Slave ship
* West Indiaman

19th c.|

* Blackwall frigate
* Clipper
* Down Easter
* Golekan
* Iron-hulled sailing ship
* Warship
* Janggolan
* Lambo
* Leti leti
* Palari
* Tamar
* West Country
* Windjammer

20th c.|

* Montagu whaler

Fishing vessels|

* Bagan
* Bago
* Barca-longa
* Falkuša
* Felucca
* Fifie
* Gableboat
* Herring buss
* Jangada
* Jukung
* Lugger
* Masula
* Mayang
* Patorani
* Nordland
* Sixareen
* Sgoth
* Smack
* Tartane
* Well smack
* Yoal

Recreational vessels|

* Dinghy
* Ljungström sailboat
* Mast aft rig
* Pocket cruiser
* Sailing hydrofoil
* Sailing yacht
* Sportsboat
* Trailer sailer
* Wharrams
* Windsurfer
* Yacht

Special terms|

* Inflatable
* Lashed lug
* Razee
* Sewn
* Tall ship
* Treenailed
* ULDB

Other types|

* Bristol Channel pilot cutter
* Floating restaurant
* Fusta
* Mersey flat
* Norfolk punt
* Norfolk wherry
* Pausik
* Pinnace (ship's boat)
* Pram
* Scow
* Sneakbox
* Thames sailing barge
* Wherry

Related|

* Nautical operations

* v
* t
* e

Sails, spars and rigging

including limited use*, outdated†

Rigs|

| Textile|

* Bermuda
* B&R
* Cat
* Fore-and-aft
* Gaff
* Gunter
* Junk*
* Ljungström
* Mast-aft
* Pinisi
* Square

|

Other|

* Rotorsail*
* Turbosail*
* Wingsail

Sails
(sailing rigs)|

| Three-sided|

* Asymmetrical spinnaker
* Crab claw*
* Gennaker
* Genoa
* Jib
* Lateen
* Mainsail (Bermuda rig)
* Raffee
* Ringtail*
* Screecher*
* Spinnaker
* Staysail
* Trysail*

|

Four-sided|

* Course
* Fisherman†
* Foresail
* Junk sail*
* Lug sail
* Mainsail (square rig)
* Moonraker*
* Ringtail*
* Royal
* Skysail*
* Spanker
* Spritsail (square-rigged)†
* Spritsail* (Optimist)
* Studding*
* Tanja sail
* Topgallant
* Topsail
* Watersail*

Components|

* Batten
* Bolt rope
* Cringle
* Emblems
* Draft
* Jackline
* Reefing points
* Roach
* Sailcloth
* Spreader patch
* Tell-tale

Spars|

| On bow|

* Bowsprit
* sprit topmast
* Dolphin striker
* Jackstaff
* Jibboom
* Pelican striker

|

On mast|

* Boom
* Boomkin
* Gaff
* Truck
* Crosstrees
* Spinnaker pole
* Spreader
* Sprit
* Yard

Rigging|

| Standing|

* Bobstay
* Lazy jack
* Running backstay
* Shroud
* ratlines
* Stay mouse†
* Stays
* backstay
* forestay

|

Running|

* Boomkicker*
* Boom vang
* Braces
* Buntlines
* Cunningham
* Clewlines
* Downhaul
* Guy
* Halyard
* peak
* throat
* Outhaul
* Preventer
* Sheet
* Tack
* Topping lift

Components|

* Baggywrinkle
* Belaying pin*
* Block
* Cleat
* bitts
* Clevis pin
* Deadeye
* Earing
* Fairlead
* Footrope
* Gasket
* Parrel beads
* Ring bolt
* Roller furling
* Shackle
* Swivel
* gooseneck
* Trapeze
* Traveller
* Turnbuckle
* Winch

*[c.]: circa
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template