Spinning jenny

Multi-spool spinning frame

Model of spinning jenny in the Museum of Early Industrialisation, Wuppertal, Germany.

The spinning jenny is a multi-spindle spinning frame, and was one of the key developments in the industrialisation of textile manufacturing during the early Industrial Revolution. It was invented in 1764–1765 by James Hargreaves in Stan Hill, Oswaldtwistle, Lancashire in England.

The device reduced the amount of work needed to produce cloth, with a worker able to work eight or more spools at once. This grew to 120 as technology advanced. The yarn produced by the jenny was not very strong until Richard Arkwright invented the water-powered water frame. The spinning jenny helped to start the factory system of cotton manufacturing.[1]

## History

[edit]

The spinning jenny was invented by James Hargreaves. He was born in Oswaldtwistle, near Blackburn, around 1720. Blackburn was a town with a population of about 5,000, known for the production of "Blackburn greys," cloths of linen warp and cotton weft initially imported from India. They were usually sent to London to be printed.[citation needed]

At the time, cotton yarn production could not keep up with demand of the textile industry, and Hargreaves spent some time considering how to improve the process. The flying shuttle (John Kay 1733) had increased yarn demand by the weavers by doubling their productivity,[2] and now the spinning jenny could supply that demand by increasing the spinners' productivity even more. The machine produced coarse thread.

The improved spinning jenny that was used in textile mills

### Components

[edit]

The idea was developed by Hargreaves as a metal frame with eight wooden spindles at one end. A set of eight rovings was attached to a beam on that frame. The rovings when extended passed through two horizontal bars of wood that could be clasped together. These bars could be drawn along the top of the frame by the spinner's left hand thus extending the thread. The spinner used their right hand to rapidly turn a wheel which caused all the spindles to revolve, and the thread to be spun. When the bars were returned, the thread wound onto the spindle. A pressing wire (faller) was used to guide the threads onto the right place on the spindle.[3]

### The politics of cotton

[edit]

In the 17th century, England was famous for its woollen and worsted cloth. That industry was centred in the east and south in towns such as Norwich which jealously protected their product. Cotton processing was tiny: in 1701 only 1,985,868 pounds (900,775 kg) of cotton-wool was imported into England, and by 1730 this had fallen to 1,545,472 pounds (701,014 kg). This was due to commercial legislation (Calico Acts) to protect the woollen industry.[4] Cheap calico prints, imported by the East India Company from Hindustan (as India was then called), became popular. In 1700 an Act of Parliament was passed to prevent the importation of dyed or printed calicoes from India, China or Persia. This caused grey cloth (calico that had not been finished – dyed or printed) to be imported instead, and these were printed in southern England with popular patterns. Lancashire businessmen produced grey cloth with linen warp and cotton weft, which they sent to London to be finished.[4] Cotton-wool imports recovered and by 1720 were almost back to 1701 levels. Again the woollen manufacturers claimed this was taking jobs from workers in Coventry.[5] Another law was passed, to fine anyone caught wearing printed or stained calico; muslins, neckcloths and fustians were exempted. It was this exemption that the Lancashire manufacturers exploited.

The use of coloured cotton weft, with linen warp was permitted in the 1736 Manchester Act. There now was an artificial demand for woven cloth. In 1764, 3,870,392 pounds (1,755,580 kg) of cotton-wool was imported.[6]

### The economics of Northern England in 1750

[edit]

In England, before canals, railways, and before the turnpikes, the only way to transport goods such as calicos, broadcloth or cotton-wool was by packhorse. Strings of packhorses travelled along a network of bridle paths. A merchant would be away from home most of the year, carrying his takings in cash in his saddlebag. Later a series of chapmen would work for the merchant, taking wares to wholesalers and clients in other towns, and with them would go sample books.[7]

Before 1720, the handloom weaver spent part of each day visiting neighbours buying any weft they had. Carding and spinning might be the only income for that household, or part of it. The family might farm a few acres and card, spin and weave wool and cotton.[8] It took three carders to provide the roving for one spinner, and up to three spinners to provide the yarn for one weaver. The process was continuous, and done by both sexes, from the youngest to the oldest. The weaver would go once a week to the market with his wares and offer them for sale.

A change came about 1740 when fustian masters gave out raw cotton and warps to the weavers and returned to collect the finished cloth (Putting-out system). The weaver organised the carding, spinning and weaving to the master's specification.[9] The master then dyed or printed the grey cloth, and took it to shopkeepers. Ten years later this had changed and the fustian masters were middle men, who collected the grey cloth and took it to market in Manchester where it was sold to merchants who organised the finishing.[citation needed]

To hand weave a 12-pound (5.4 kg) piece of eighteenpenny weft took 14 days and paid 36 shillings in all. Of this nine shillings was paid for spinning, and nine for carding.[8] So by 1750, a rudimentary manufacturing system feeding into a marketing system emerged.

In 1738, John Kay started to improve the loom. He improved the reed, and invented the raceboard, the shuttleboxes and the picker which together allowed one weaver to double his output. This invention is commonly called the flying shuttle. It met with violent opposition and he fled from Lancashire to Leeds.[10] Though the workers thought this was a threat to their jobs, it was adopted and the pressure was on to speed up carding and spinning.[citation needed]

The shortage of spinning capacity to feed the more efficient looms provided the motivation to develop more productive spinning techniques such as the spinning jenny, and triggered the start of the Industrial Revolution.[citation needed]

## Success

[edit]

Spinning jenny at Blackburn Museum and Art Gallery

Around 1764–1765, Hargreaves invented the spinning jenny. He kept the machine secret for some time, but he produced a number for his own growing industry. The price of yarn fell, angering the large spinning community in Blackburn. Eventually they broke into his house and smashed his machines, forcing him to flee to Nottingham in 1768. This was a centre for the hosiery industry, and knitted silks, cottons and wool. There he set up shop producing jennies in secret for one Mr Shipley, with the assistance of a joiner named Thomas James. He and James set up a textile business in Mill Street. On 12 July 1770, he took out a patent (no. 962) on his invention, the Spinning Jenny—a machine for spinning, drawing and twisting cotton.[11][12] By this time a number of spinners in Lancashire were using copies of the machine, and Hargreaves sent notice that he was taking legal action against them. The manufacturers met, and offered Hargreaves £3,000. He at first demanded £7,000, and stood out for £4,000, but the case eventually fell apart when it was learned he had sold several in the past.[13]

The spinning jenny succeeded because it held more than one ball of yarn, making more yarn in a shorter time and reducing the overall cost. The spinning jenny would not have been such a success if the flying shuttle had not been invented and installed in textile factories. Its success was limited in that it required the rovings to be prepared on a wheel, and this was limited by the need to card by hand.[1] It continued in common use in the cotton and fustian industry until about 1810.[14] The spinning jenny was superseded by the spinning mule. The jenny was adapted for the process of slubbing, being the basis of the Slubbing Billy.[15]

## Origin and myth

[edit]

The most common story told about the invention of the device and the origin of the jenny in the machine's name is that one of his daughters (or his wife) named Jenny knocked over one of their own spinning wheels. The device kept working normally, with the spindle now pointed upright. Hargreaves realised there was no particular reason the spindles had to be horizontal, as they always had been, and he could place them vertically in a row.[16]

The name is variously said to derive from this tale. The Registers of Church Kirk show that Hargreaves had several daughters, but none named Jenny (neither was his wife). A more likely explanation of the name is that jenny was an abbreviation of engine.[17]

Thomas Highs of Leigh has claimed to be the inventor[18] and the story is repeated using his wife's name.

Another myth has Thomas Earnshaw inventing a spinning device of a similar description – but destroying it after fearing he might be taking bread out of the mouths of the poor.[19]

## See also

[edit]

* Cotton mill
* Luddite
* Spinning mule
* Textile manufacture during the Industrial Revolution
* Textile manufacturing
* Timeline of clothing and textiles technology

## References

[edit]

1. ^ a b Espinasse 1874, p. 322
2. ^ Timmins 1993, p. 18.
3. ^ Baines 1835, p. 157
4. ^ a b Espinasse 1874, p. 296
5. ^ Espinasse 1874, p. 298
6. ^ Espinasse 1874, p. 299
7. ^ Espinasse 1874, p. 300
8. ^ a b Espinasse 1874, p. 306
9. ^ Espinasse 1874, p. 304
10. ^ Espinasse 1874, p. 313
11. ^ Espinasse 1874, p. 325
12. ^ Aiken, John. "John Aitken on the industrialization in and around Manchester, 1795". Retrieved 26 November 2016.
13. ^ Baines 1835, p. 162
14. ^ Guest 1828 and could produce both weft and warp for the woollen industry.
15. ^ Marsden 1884, p. 219
16. ^ Bellis, Mary: «Spinning Jenny – James Hargreaves», About.com
17. ^ Harling, Nick. "James Hargreaves 1720–1778". Cotton Town: Blackburn with Darwen. Archived from the original on 15 June 2010. Retrieved 17 May 2009.
18. ^ Baines 1835, p. 155
19. ^ Espinasse 1874, p. 316

## Bibliography

[edit]

* Baines, Edward (1835). History of the cotton manufacture in Great Britain;. London: H. Fisher, R. Fisher, and P. Jackson.
* Nasmith, Joseph (1895). Recent Cotton Mill Construction and Engineering (Elibron Classics ed.). London: John Heywood. ISBN 1-4021-4558-6. `{{cite book}}`: ISBN / Date incompatibility (help)
* Marsden, Richard (1884). Cotton Spinning: its development, principles and practice. George Bell and Sons 1903. Retrieved 26 April 2009.
* Marsden, ed. (1909). Cotton Yearbook 1910. Manchester: Marsden and Co. Retrieved 26 April 2009.
* Espinasse, Francis (1874). Lancashire Worthies. London: Simpkin, Marshall, & Co. Retrieved 1 December 2010.
* Guest, Richard (1828). The British Cotton Manufactures: and a Reply to an Article on the Spinning Contained in a Recent Number of the Edinburgh Review. London: E. Thomson & Sons and W. & W. Clarke and Longman, Rees, & Co.
* Timmins, Geoffrey (1993), The Last Shift:The decline of handloom weaving in nineteenth-century Lancashire, Manchester: Manchester University Press, p. 253, ISBN 0 7190-3725-5

## External links

[edit]

Wikimedia Commons has media related to Spinning jennies.

* Essay from www.cottontown.org on Hargreaves and the spinning jenny.
* Essay from www.cottonttimes.co.uk on Thomas Highs and the spinning jenny.
* Source for alternate name of spinning ginny

* v
* t
* e

Spinning

Materials|

* Noil
* Rolag
* Roving
* Sliver
* Staple
* Top
* Tow
* Woolen
* Worsted

Techniques|

* Carding
* Combing
* Heckling
* Long draw
* Scutching
* Short draw
* Twist per inch

Hand spinning tools|

* Hand spinning
* Distaff
* Niddy noddy
* Nostepinne
* Spindle
* Spinning wheel
* Spinner's weasel

Industrial spinning|

* Cotton-spinning machinery
* Ring spinning
* Open-end spinning
* DREF friction spinning
* Magnetic ring spinning
* Mule spinners' cancer
* Piece-rate list
* Spinning frame
* Spinning jenny
* Spinning mule
* Throstle frame
* Water frame
* Wool combing machine

* v
* t
* e

Lancashire cotton

Architects|

* David Bellhouse
* Bradshaw Gass & Hope
* F.W. Dixon & Son
* Edward Potts
* Stott
* Stott and Sons
* Sidney Stott (later Sir Philip)

Engine makers|

* Daniel Adamson
* Ashton Frost
* Ashworth & Parker
* Bateman & Sherratt
* Boulton & Watt
* Browett, Lindley & Co
* Buckley & Taylor
* Carels Frères
* Clayton, Goodfellow & Co
* Earnshaw & Holt
* Fairbairn
* W & J Galloway & Sons
* Benjamin Goodfellow
* B. Hick and Sons / Hick, Hargreaves & Co
* John Musgrave & Sons
* J & W McNaught
* Petrie of Rochdale
* William Roberts & Co of Nelson
* George Saxon
* Scott & Hodgson
* Urmson & Thompson
* Yates & Thom / Yates of Blackburn
* Willans & Robinson
* J & E Wood
* Woolstenhulmes & Rye

Machinery makers|

* Brooks & Doxey
* Butterworth & Dickinson
* Curtis, Parr & Walton
* Dobson & Barlow
* John Hetherington & Sons
* Joseph Hibbert
* John Pilling and Sons
* Harling & Todd
* Howard & Bullough
* Geo. Hattersley
* Asa Lees
* Mather & Platt
* Parr, Curtis & Madely
* British Northrop Loom Co
* Pemberton & Co
* Platt Brothers
* Taylor, Lang & Co
* Textile Machinery Makers
* Tweedales & Smalley
* T. Wildman & Sons

Mill owners|

* Elkanah Armitage
* Henry Ashworth
* Hugh Birley
* Hugh Hornby Birley
* Joseph Brotherton
* James Burton
* Peter Drinkwater
* Nathaniel Eckersley
* John Fielden
* William Gray
* Hannah Greg
* Samuel Greg
* Richard Howarth
* William Houldsworth
* John Kennedy
* George Augustus Lee
* Charles Macintosh
* Hugh Mason
* Samuel Oldknow
* Robert Peel
* John Rylands
* Thomas Whitehead and Brothers

Limited companies|

* Oldham Limiteds
* Fine Spinners and Doublers
* Lancashire Cotton Corporation
* Bagley & Wright
* Combined Egyptian Mills
* Courtaulds
* James Burton & Sons
* Amalgamated Cotton Mills Trust

Industrial processes|

* Textile manufacturing
* Cotton-spinning machinery
* DREF friction spinning
* Magnetic ring spinning
* Open-end spinning
* Ring spinning
* Spinning frame
* Spinning jenny
* Spinning mule
* Carding
* Steaming
* Water frame
* Roberts Loom
* Lancashire Loom
* Northrop Loom
* Air-jet loom
* Rapier loom
* Dandy loom
* Lancashire boiler

Associations|

* Amalgamated Association of Beamers, Twisters and Drawers (Hand and Machine)
* Amalgamated Association of Operative Cotton Spinners
* Amalgamated Textile Warehousemen's Association
* Amalgamated Textile Workers' Union
* Amalgamated Weavers' Association
* Cardroom Amalgamation
* General Union of Lancashire and Yorkshire Warp Dressers' Association
* General Union of Loom Overlookers
* Lancashire Amalgamated Tape Sizers' Friendly Society
* North East Lancashire Amalgamated Weavers' Association
* Northern Counties Textile Trades Federation
* The Textile Institute
* United Textile Factory Workers' Association

Employment practices|

* More looms
* Kissing the shuttle
* Mule spinners' cancer
* Piece-rate list

Lists of mills|

* LCC mills
* Bolton
* Bury
* Cheshire
* Derbyshire
* Lancashire
* Manchester
* Oldham (borough)
* Preston
* Rochdale
* Salford
* Stockport
* Tameside
* Wigan
* Yorkshire

Museums|

* Bancroft Shed
* Helmshore Mills
* Queen Street Mill
* Weavers' Triangle
* Quarry Bank Mill, Styal

Pioneers|

* Richard Arkwright
* Samuel Crompton
* Peter Foxcroft
* James Hargreaves
* Thomas Highs
* John Kay (flying shuttle)
* John Kay (spinning frame)
* Robert Owen

*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template