Synchrotron light source

Particle accelerator designed to produce intense x-ray beams

This article is about the laboratory production and applications of synchrotron radiation. For details of physics of emission and properties, see synchrotron radiation.

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Synchrotron light source" – news · newspapers · books · scholar · JSTOR (July 2020) (Learn how and when to remove this message)

|

Synchrotron radiation reflecting from a terbium crystal at the Daresbury Synchrotron Radiation Source, 1990

A synchrotron light source is a source of electromagnetic radiation (EM) usually produced by a storage ring,[1] for scientific and technical purposes. First observed in synchrotrons, synchrotron light is now produced by storage rings and other specialized particle accelerators, typically accelerating electrons. Once the high-energy electron beam has been generated, it is directed into auxiliary components such as bending magnets and insertion devices (undulators or wigglers) in storage rings and free electron lasers. These supply the strong magnetic fields perpendicular to the beam that are needed to stimulate the high energy electrons to emit photons.

The major applications of synchrotron light are in condensed matter physics, materials science, biology and medicine. A large fraction of experiments using synchrotron light involve probing the structure of matter from the sub-nanometer level of electronic structure to the micrometer and millimeter levels important in medical imaging. An example of a practical industrial application is the manufacturing of microstructures by the LIGA process.

Synchrotron is one of the most expensive kinds of light source known, but it is practically the only viable luminous source of wide-band radiation in far infrared wavelength range for some applications, such as far-infrared absorption spectrometry.

## Spectral brightness

[edit]

The primary figure of merit used to compare different sources of synchrotron radiation has been referred to as the "brightness", the "brilliance", and the "spectral brightness", with the latter term being recommended as the best choice by the Working Group on Synchrotron Nomenclature.[2] Regardless of the name chosen, the term is a measure of the total flux of photons in a given six-dimensional phase space per unit bandwidth (BW).[3]

The spectral brightness is given by

B = N ˙ ph 4 π 2 σ x σ y σ x ′ σ y ′ d ω ω , {\displaystyle B={\frac {{\dot {N}}_{\text{ph}}}{4\pi ^{2}\sigma _{x}\sigma _{y}\sigma _{x'}\sigma _{y'}{\frac {d\omega }{\omega }}}},}

where  N ˙ ph {\displaystyle {\dot {N}}_{\text{ph}}} is the number of photons per second in the beam,  σ x {\displaystyle \sigma _{x}} and  σ y {\displaystyle \sigma _{y}} are the root mean square values for the size of the beam in the axes perpendicular to the beam direction,  σ x ′ {\displaystyle \sigma _{x'}} and  σ y ′ {\displaystyle \sigma _{y'}} are the RMS values for the beam solid angle in the x and y dimensions, and  d ω ω {\textstyle {\frac {d\omega }{\omega }}} is the relative bandwidth, or spread in beam frequency around the central frequency.[4] The customary value for bandwidth is 0.1%.[2]

Spectral brightness has units of time−1⋅distance−2⋅angle−2⋅(% bandwidth)−1.

## Properties of sources

[edit]

This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (January 2021) (Learn how and when to remove this message)

|

Especially when artificially produced, synchrotron radiation is notable for its:

* High brilliance, many orders of magnitude more than with X-rays produced in conventional X-ray tubes: 3rd-generation sources typically have a brilliance larger than 1018 photons·s−1·mm−2·mrad−2/(0.1%BW), where 0.1%BW denotes a bandwidth 10−3ω centered around the frequency ω.
* High level of polarization (linear, elliptical or circular).
* High collimation, i.e. small angular divergence of the beam.
* Low emittance, i.e. the product of source cross-section and solid angle of emission is small.
* Wide tunability in energy/wavelength by monochromatization (sub-electronvolt up to the megaelectronvolt range).
* Pulsed light emission (pulse durations at or below one nanosecond, or a billionth of a second)..

## Synchrotron radiation from accelerators

[edit]

Synchrotron radiation may occur in accelerators either as a nuisance, causing undesired energy loss in particle physics contexts, or as a deliberately produced radiation source for numerous laboratory applications. Electrons are accelerated to high speeds in several stages to achieve a final energy that is typically in the gigaelectronvolt range. The electrons are forced to travel in a closed path by strong magnetic fields. This is similar to a radio antenna, but with the difference that the relativistic speed changes the observed frequency due to the Doppler effect by a factor  γ {\displaystyle \gamma } . Relativistic Lorentz contraction bumps the frequency by another factor of  γ {\displaystyle \gamma } , thus multiplying the gigahertz frequency of the resonant cavity that accelerates the electrons into the X-ray range. Another dramatic effect of relativity is that the radiation pattern is distorted from the isotropic dipole pattern expected from non-relativistic theory into an extremely forward-pointing cone of radiation. This makes synchrotron radiation sources the most brilliant known sources of X-rays. The planar acceleration geometry makes the radiation linearly polarized when observed in the orbital plane, and circularly polarized when observed at a small angle to that plane.[citation needed]

The advantages of using synchrotron radiation for spectroscopy and diffraction have been realized by an ever-growing scientific community, beginning in the 1960s and 1970s. In the beginning, accelerators were built for particle physics, and synchrotron radiation was used in "parasitic mode" when bending magnet radiation had to be extracted by drilling extra holes in the beam pipes. The first storage ring commissioned as a synchrotron light source was Tantalus, at the Synchrotron Radiation Center, first operational in 1968.[5]

Bending electromagnets in accelerators were first used to generate this radiation, but to generate stronger "brighter" radiation, other specialized devices – insertion devices – are sometimes employed. Innovations such as the Chasman–Green lattice, an array of magnets which maximises brightness, led to a second-generation of dedicated light sources. The National Synchrotron Light Source at Brookhaven National Laboratory was the first to use such a lattice.[6]

Third-generation synchrotron radiation sources are typically reliant upon these insertion devices, where straight sections of the storage ring incorporate periodic magnetic structures (comprising many magnets in a pattern of alternating N and S poles – see diagram above) which force the electrons into a sinusoidal or helical path. Thus, instead of a single bend, many tens or hundreds of "wiggles" at precisely calculated positions add up or multiply the total intensity of the beam.[citation needed] These devices are called wigglers or undulators. The main difference between an undulator and a wiggler is the intensity of their magnetic field and the amplitude of the deviation from the straight line path of the electrons.[citation needed] The first third-generation light source, built with undulators as part of the initial design, the European Synchrotron Radiation Facility was opened to users in 1994.[6]

Fourth-generation sources, such as the Sirius[6] at the Brazilian Synchrotron Light Laboratory (LNLS), make use of "multi-bend achromat" magnets to further increase brightness of their electron beams.

## Applications of synchrotron radiation

[edit]

* Synchrotron radiation of an electron beam circulating at high energy in a magnetic field leads to radiative self-polarization of electrons in the beam (Sokolov–Ternov effect).[7] This effect is used for producing highly polarised electron beams for use in various experiments.[citation needed]
* Synchrotron radiation sets the beam sizes (determined by the beam emittance) in electron storage rings via the effects of radiation damping and quantum excitation.[8]

## Beamlines

[edit]

Beamlines of Soleil

At a synchrotron facility, electrons are usually accelerated by a synchrotron, and then injected into a storage ring, in which they circulate, producing synchrotron radiation, but without gaining further energy. The radiation is projected at a tangent to the electron storage ring and captured by beamlines. These beamlines may originate at bending magnets, which mark the corners of the storage ring; or insertion devices, which are located in the straight sections of the storage ring. The spectrum and energy of X-rays differ between the two types. The beamline includes X-ray optical devices which control the bandwidth, photon flux, beam dimensions, focus, and collimation of the rays. The optical devices include slits, attenuators, crystal monochromators, and mirrors. The mirrors may be bent into curves or toroidal shapes to focus the beam. A high photon flux in a small area is the most common requirement of a beamline. The design of the beamline will vary with the application. At the end of the beamline is the experimental end station, where samples are placed in the line of the radiation, and detectors are positioned to measure the resulting diffraction, scattering or secondary radiation.

## Experimental techniques and usage

[edit]

Synchrotron light is an ideal tool for many types of research in materials science, physics, and chemistry and is used by researchers from academic, industrial, and government laboratories. Several methods take advantage of the high intensity, tunable wavelength, collimation, and polarization of synchrotron radiation at beamlines which are designed for specific kinds of experiments. The high intensity and penetrating power of synchrotron X-rays enables experiments to be performed inside sample cells designed for specific environments. Samples may be heated, cooled, or exposed to gas, liquid, or high pressure environments. Experiments which use these environments are called in situ and allow the characterization of atomic- to nano-scale phenomena which are inaccessible to most other characterization tools. In operando measurements are designed to mimic the real working conditions of a material as closely as possible.[9]

### Diffraction and scattering

[edit]

X-ray diffraction (XRD) and scattering experiments are performed at synchrotrons for the structural analysis of crystalline and amorphous materials. These measurements may be performed on powders, single crystals, or thin films. The high resolution and intensity of the synchrotron beam enables the measurement of scattering from dilute phases or the analysis of residual stress. Materials can be studied at high pressure using diamond anvil cells to simulate extreme geologic environments or to create exotic forms of matter.[citation needed]

Structure of a ribosome subunit solved at high resolution using synchrotron X-ray crystallography.[10]

X-ray crystallography of proteins and other macromolecules (PX or MX) are routinely performed. Synchrotron-based crystallography experiments were integral to solving the structure of the ribosome;[10][11] this work earned the Nobel Prize in Chemistry in 2009.[12]

The size and shape of nanoparticles are characterized using small angle X-ray scattering (SAXS). Nano-sized features on surfaces are measured with a similar technique, grazing-incidence small angle X-ray scattering (GISAXS).[13] In this and other methods, surface sensitivity is achieved by placing the crystal surface at a small angle relative to the incident beam, which achieves total external reflection and minimizes the X-ray penetration into the material.[citation needed]

The atomic- to nano-scale details of surfaces, interfaces, and thin films can be characterized using techniques such as X-ray reflectivity (XRR) and crystal truncation rod (CTR) analysis.[14] X-ray standing wave (XSW) measurements can also be used to measure the position of atoms at or near surfaces; these measurements require high-resolution optics capable of resolving dynamical diffraction phenomena.[15]

Amorphous materials, including liquids and melts, as well as crystalline materials with local disorder, can be examined using X-ray pair distribution function analysis, which requires high energy X-ray scattering data.[16]

By tuning the beam energy through the absorption edge of a particular element of interest, the scattering from atoms of that element will be modified. These so-called resonant anomalous X-ray scattering methods can help to resolve scattering contributions from specific elements in the sample.[citation needed]

Other scattering techniques include energy dispersive X-ray diffraction, resonant inelastic X-ray scattering, and magnetic scattering.[citation needed]

### Spectroscopy

[edit]

X-ray absorption spectroscopy (XAS) is used to study the coordination structure of atoms in materials and molecules. The synchrotron beam energy is tuned through the absorption edge of an element of interest, and modulations in the absorption are measured. Photoelectron transitions cause modulations near the absorption edge, and analysis of these modulations (called the X-ray absorption near-edge structure (XANES) or near-edge X-ray absorption fine structure (NEXAFS)) reveals information about the chemical state and local symmetry of that element. At incident beam energies which are much higher than the absorption edge, photoelectron scattering causes "ringing" modulations called the extended X-ray absorption fine structure (EXAFS). Fourier transformation of the EXAFS regime yields the bond lengths and number of the surrounding the absorbing atom; it is therefore useful for studying liquids and amorphous materials[17] as well as sparse species such as impurities. A related technique, X-ray magnetic circular dichroism (XMCD), uses circularly polarized X-rays to measure the magnetic properties of an element.[citation needed]

X-ray photoelectron spectroscopy (XPS) can be performed at beamlines equipped with a photoelectron analyzer. Traditional XPS is typically limited to probing the top few nanometers of a material under vacuum. However, the high intensity of synchrotron light enables XPS measurements of surfaces at near-ambient pressures of gas. Ambient pressure XPS (AP-XPS) can be used to measure chemical phenomena under simulated catalytic or liquid conditions.[18] Using high-energy photons yields high kinetic energy photoelectrons which have a much longer inelastic mean free path than those generated on a laboratory XPS instrument. The probing depth of synchrotron XPS can therefore be lengthened to several nanometers, allowing the study of buried interfaces. This method is referred to as high-energy X-ray photoemission spectroscopy (HAXPES).[19] Furthermore, the tunable nature of the synchrotron X-ray photon energies presents a wide range of depth sensitivity in the order of 2-50 nm.[20] This allows for probing of samples at greater depths and for non destructive depth-profiling experiments.

Material composition can be quantitatively analyzed using X-ray fluorescence (XRF). XRF detection is also used in several other techniques, such as XAS and XSW, in which it is necessary to measure the change in absorption of a particular element.[citation needed]

Other spectroscopy techniques include angle resolved photoemission spectroscopy (ARPES), soft X-ray emission spectroscopy, and nuclear resonance vibrational spectroscopy, which is related to Mössbauer spectroscopy.[citation needed]

### Imaging

[edit]

X-ray nanoprobe beamline at the Advanced Photon Source

Synchrotron X-rays can be used for traditional X-ray imaging, phase-contrast X-ray imaging, and tomography. The Ångström-scale wavelength of X-rays enables imaging well below the diffraction limit of visible light, but practically the smallest resolution so far achieved is about 30 nm.[21] Such nanoprobe sources are used for scanning transmission X-ray microscopy (STXM). Imaging can be combined with spectroscopy such as X-ray fluorescence or X-ray absorption spectroscopy in order to map a sample's chemical composition or oxidation state with sub-micron resolution.[22]

## Compact synchrotron light sources

[edit]

Because of the usefulness of tuneable collimated coherent X-ray radiation, efforts have been made to make smaller more economical sources of the light produced by synchrotrons. The aim is to make such sources available within a research laboratory for cost and convenience reasons; at present, researchers have to travel to a facility to perform experiments. One method of making a compact light source is to use the energy shift from Compton scattering near-visible laser photons from electrons stored at relatively low energies of tens of megaelectronvolts (see for example the Compact Light Source (CLS)[23]).

## See also

[edit]

* List of synchrotron radiation facilities
* List of light sources

## References

[edit]

1. ^ Handbook on Synchrotron Radiation, Volume 1a, Ernst-Eckhard Koch, Ed., North Holland, 1983, reprinted at "Synchrotron Radiation Turns the Big Five-O Archived September 16, 2008, at the Wayback Machine
2. ^ a b Mills, D. M.; Helliwell, J. R.; Kvick, Å.; Ohta, T.; Robinson, I. A.; Authier, A. (1 May 2005). "Report of the Working Group on Synchrotron Radiation Nomenclature – brightness, spectral brightness or brilliance?". Journal of Synchrotron Radiation. 12 (3): 385. Bibcode:2005JSynR..12..385M. doi:10.1107/S090904950500796X. PMID 15840926. Retrieved 8 April 2022.
3. ^ Nielsen, Jens (2011). Elements of modern X-ray physics. Chichester, West Sussex: John Wiley. ISBN 9781119970156.
4. ^ Wiedemann, Helmut (2007). Particle accelerator physics (3rd ed.). Berlin: Springer. p. 782\. ISBN 9783540490432.
5. ^ E. M. Rowe and F. E. Mills, Tantalus I: A Dedicated Storage Ring Synchrotron Radiation Source, Particle Accelerators, Vol. 4 (1973); pages 211-227.
6. ^ a b c Crease, Robert P (2025-03-25). "China's High Energy Photon Source prepares to light up the world". Physics World. Retrieved 2025-05-20.
7. ^ A. A. Sokolov; I. M. Ternov (1986). C. W. Kilmister (ed.). Radiation from Relativistic Electrons. Translation Series. New York: American Institute of Physics. ISBN 978-0-88318-507-0.
8. ^ The Physics of Electron Storage Rings: An Introduction by Matt Sands Archived 2015-05-11 at the Wayback Machine
9. ^ Nelson, Johanna; Misra, Sumohan; Yang, Yuan; Jackson, Ariel; Liu, Yijin; et al. (2012-03-30). "In Operando X-ray Diffraction and Transmission X-ray Microscopy of Lithium Sulfur Batteries". Journal of the American Chemical Society. 134 (14): 6337–6343\. doi:10.1021/ja2121926. PMID 22432568.
10. ^ a b Ban, N.; Nissen, P.; Hansen, J.; Moore, P.; Steitz, T. (2000-08-11). "The Complete Atomic Structure of the Large Ribosomal Subunit at 2.4 Å Resolution". Science. 289 (5481): 905–920\. Bibcode:2000Sci...289..905B. doi:10.1126/science.289.5481.905. PMID 10937989.
11. ^ The Royal Swedish Academy of Sciences, "The Nobel Prize in Chemistry 2009: Information for the Public", accessed 2016-06-20
12. ^ "The Nobel Prize in Chemistry 2009". NobelPrize.org. Retrieved 2025-06-06.
13. ^ Renaud, Gilles; Lazzari, Rémi; Leroy, Frédéric (2009). "Probing surface and interface morphology with Grazing Incidence Small Angle X-Ray Scattering". Surface Science Reports. 64 (8): 255–380\. Bibcode:2009SurSR..64..255R. doi:10.1016/j.surfrep.2009.07.002.
14. ^ Robinson, I K; Tweet, D J (1992-05-01). "Surface X-ray diffraction". Reports on Progress in Physics. 55 (5): 599–651\. Bibcode:1992RPPh...55..599R. doi:10.1088/0034-4885/55/5/002. S2CID 250899816.
15. ^ Golovchenko, J. A.; Patel, J. R.; Kaplan, D. R.; Cowan, P. L.; Bedzyk, M. J. (1982-08-23). "Solution to the Surface Registration Problem Using X-Ray Standing Waves" (PDF). Physical Review Letters. 49 (8): 560–563\. Bibcode:1982PhRvL..49..560G. doi:10.1103/physrevlett.49.560.
16. ^ T. Egami, S.J.L. Billinge, "Underneath the Bragg Peaks: Structural Analysis of Complex Materials", Pergamon (2003)
17. ^ Sayers, Dale E.; Stern, Edward A.; Lytle, Farrel W. (1971-11-01). "New Technique for Investigating Noncrystalline Structures: Fourier Analysis of the Extended X-Ray—Absorption Fine Structure". Physical Review Letters. 27 (18): 1204–1207\. Bibcode:1971PhRvL..27.1204S. doi:10.1103/physrevlett.27.1204.
18. ^ Bluhm, Hendrik; Hävecker, Michael; Knop-Gericke, Axel; Kiskinova, Maya; Schlögl, Robert; Salmeron, Miquel (2017). "In Situ X-Ray Photoelectron Spectroscopy Studies of Gas-Solid Interfaces at Near-Ambient Conditions". MRS Bulletin. 32 (12): 1022–1030\. doi:10.1557/mrs2007.211. OSTI 927255. S2CID 55577979.
19. ^ Sing, M.; Berner, G.; Goß, K.; Müller, A.; Ruff, A.; Wetscherek, A.; Thiel, S.; Mannhart, J.; Pauli, S. A.; Schneider, C. W.; Willmott, P. R.; Gorgoi, M.; Schäfers, F.; Claessen, R. (2009-04-30). "Profiling the Interface Electron Gas of LaAlO3/SrTiO3 Heterostructures with Hard X-Ray Photoelectron Spectroscopy". Physical Review Letters. 102 (17): 176805. arXiv:0809.1917. Bibcode:2009PhRvL.102q6805S. doi:10.1103/physrevlett.102.176805. PMID 19518810. S2CID 43739895.
20. ^ Gong, Zhengliang; Yang, Yong (2018). "The application of synchrotron X-ray techniques to the study of rechargeable batteries". Journal of Energy Chemistry. 27 (6): 1566–1583\. doi:10.1016/j.jechem.2018.03.020. S2CID 104038441.
21. ^ Argonne National Laboratory Center for Nanoscale Materials, "X-Ray Microscopy Capabilities", accessed 2016-06-20
22. ^ Beale, Andrew M.; Jacques, Simon D. M.; Weckhuysen, Bert M. (2010). "Chemical imaging of catalytic solids with synchrotron radiation". Chemical Society Reviews. 39 (12): 4656–4672\. doi:10.1039/c0cs00089b. hdl:1874/290865. PMID 20978688.
23. ^ "Miniature synchrotron produces first light". Eurekalert.org. Retrieved 2009-10-19.

## External links

[edit]

* Elettra Sincrotrone Trieste - Elettra and FERMI lightsources
* Imaging ancient insects with synchrotron light source -- BBC
* Synchrotron light at IOP