Triton motorcycle

Hybrid motorcycle combining parts of different manufacturers

Pre-unit construction 650 cc Triumph twin-cylinder engine in a Norton 'wideline' Featherbed frame

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Triton motorcycle" – news · newspapers · books · scholar · JSTOR (July 2009) (Learn how and when to remove this message)

|

This article possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (April 2020) (Learn how and when to remove this message)

|

(Learn how and when to remove this message)

Triton motorcycles were hybrid motor cycles built from the 1950s to the 1970s[citation needed] that involved fitting Triumph engines into Norton frames. Because no factory offered Triton motorcycles, they were typically privately built. However, some UK dealers offered complete bikes.[1] The aim was to combine the best elements of each marque and thus gain a bike superior to either. The name 'Triton' is a contraction of Triumph and Norton; 'Triton' was the name of an ancient Greek god.

During the period in which Triton motorcycles were constructed, the Norton featherbed frame was regarded as the best handling frame.[2][3] Triton bikes aimed to combine the "best engine" with the "best frame" by replacing the standard Norton engine with a Triumph parallel-twin engine. Although "best" is subjective, a popular engine choice was the Triumph Bonneville unit with twin carburettors and twin camshafts. This pushrod engine gave good performance and reliability and could be more easily tuned for greater power using high-profile camshafts, high compression pistons and twin carburettors. In due course, a Weslake 8-valve head became available for the Triumph motor.

The Triumph engine was seen as an upgrade because the Norton 650 and 750 vertical twin engines were known to have reliability problems.[citation needed] At about 7000 rpm the piston exceeds the engineering limit for piston speed, so over-revving soon destroys the engines. The BSA 650 had a bronze bush main bearing on the right hand side, doubling as the crank oil feed, with a lack of effective crankshaft end play control, that all had difficulty staying together when ridden hard, even though the rest of the design was possibly more robust than the Triumph. The Triumph vertical twin used a ball on the timing side, and a roller on the other, with the oil feeding through a separate bronze bush in the outer right hand engine side cover.

650 cc Triumph twin-cylinder engine in a Norton "slimline" featherbed frame

Whereas the Norton 650SS 646.44 cc had a bore and stroke of 68 x 89 mm giving 49 bhp (37 kW) @ 6,800 rpm, the Triumph T120 Bonneville 649.31 cc had a bore and stroke of 71 x 82 mm giving 46 bhp (34 kW) @ 6,500 rpm. However the mean piston speed of the Norton was 3,971 ft/min (almost at the, then accepted, limit of 4,000 ft/min). The Triumph, with its shorter stroke, had a mean piston speed of only 3,497 ft/min, had much less vibration and was much stronger and reliable. Road tests showed that the Norton had a higher top speed due to its 3 bhp (2.2 kW) advantage. In spite of this, the Triumph was the much preferred engine. The Norton featherbed was the preferred frame, hence the Triton.

Tritons with a pre-unit Triumph motor sometimes retained the post-1960 Norton AMC gearbox, which was thought superior to the equivalent Triumph gearbox. A Quaife five speed gearbox was sometimes used. More modern Tritons use a Triumph unit construction twin in a Featherbed frame.

Several motorcycle dealers made equipment for Triton conversions, some would do the complete job for customers while others sold complete Tritons. The most important part required are the engine mounting plates and several different designs exist that can affect the engine placement and therefore the handling. The lower the engine is mounted the better the handling achieved from the Norton frame.

## Other hybrids

[edit]

A "Norbsa" with a BSA chassis and Norton Commando 850cc engine

The Triton was probably the most common hybrid British motorcycle. Others include the Tribsa, with a Triumph engine in a BSA frame; the Norvin, with a Vincent V-twin engine in a Norton featherbed frame;[4] and a Trifield with a Triumph engine in a Royal Enfield frame. A "Norbsa" may be either a BSA engine in the Norton featherbed frame, or a Norton engine in a BSA frame.

## References

[edit]

1. ^ Brown, Roland (15 September 2022). "The original Dresda Triton is a loveable mongrel with race-winning pedigree". Hagerty International Limited. Retrieved 22 May 2024.
2. ^ Foale, Tony (2006). Motorcycle Handling and Chassis Design: The Art and Science. Tony Foale. ISBN 9788493328634.
3. ^ Walker, Alastair (2009). The Cafe Racer Phenomenon. Veloce Publishing Ltd. ISBN 9781845842642.
4. ^ Norvin technical section thevincent.com (retrieved 18 November 2007)

## External links

[edit]

* Building a Triton in your kitchen
* 1959 T100 Triton built in 2003
* the Bike Shed's 1955 Triton
* Cafe racer at the Open Directory Project