Physics equations

* * *

* * *

* Quizbank now resides on MyOpenMath at https://www.myopenmath.com (although I hope Wikiversity can play an important role in helping students and teachers use these questions!)

* At the moment, most of the physics questions have already been transferred. To see them, join myopenmath.com as a student, and "enroll" in one or both of the following courses:

* Quizbank physics 1 (id 60675)
* Quizbank physics 2 (id 61712)
* Quizbank astronomy (id 63705)

The enrollment key for each course is 123. They are all is set to practice mode, giving students unlimited attempts at each question. Instructors can also print out copies of the quiz for classroom use. If you have any problems leave a message at user talk:Guy vandegrift.

* Latest essay: MyOpenMath/Pulling loose threads
* Latest lesson: Phasor algebra

* * *

* * *

Link to any subpages this page might have

This page will be superceded by OpenStax College Physics and OpenStax University Physics see also Wright State University Lake Campus

Equation Sheet   Wikiquizzes   Wikiquiz_solutions   Online_textbook   Current Trigbased   Current Calcbased   Labs   OpenStax College   Rewrite

Category:Physics equations Subcategories: Equations   Quizzes   Equations_transcluded   Sheet   node_index   supplement

INSTRUCTIONS:   (click here to view or hide instructions)

1. Click the "Title" link to open a chapter of openstax Physics.
2. Click "view or hide equations" to unhide only the equations you need. Click again to hide. To print out an equation sheet unhide the relevant sections and either print as a pdf file, or paste into MS word and obtain a more polished sheet, after some light editing.
3. Click the "wikiquizzes" link (on the same line) for wikiquizzes and supplementary material.
4. See General information for a rough draft of an information page.
5. Editors see also: Equations   Sheet   sandboxes   Template:Physeq1   Template:Physeq2   Template:PhyseqM

Mathematics for this course (click here for "textbook")

00 view or hide equations (Click here to view; click again to hide)

Measured in radians,  θ = s / r {\displaystyle \theta =s/r} defines angle (in radians), where s is arclength and r is radius. The circumference of a circle is  C ⊙ = 2 π r {\displaystyle C_{\odot }=\,2\pi r} and the circle's area is  A ⊙ = π r 2 {\displaystyle A_{\odot }=\,\pi r^{2}} is its area. The surface area of a sphere is  A ◯ = 4 π r 2 {\displaystyle A_{\bigcirc }=4\pi r^{2}} and sphere's volume is  V ◯ = 4 3 π r 3 {\displaystyle V_{\bigcirc }={\frac {4}{3}}\pi r^{3}}

A vector can be expressed as,  A → = A x i ^ + A y j ^ {\displaystyle {\vec {A}}=A_{x}\,{\hat {i}}+A_{y}\,{\hat {j}}} , where  A x = A cos ⁡ θ {\displaystyle A_{x}=A\cos \theta } , and  A y = A sin ⁡ θ {\displaystyle A_{y}=A\sin \theta } are the x and y components. Alternative notation for the unit vectors ( i ^ , j ^ ) {\displaystyle ({\hat {i}},{\hat {j}})} include  ( x ^ , y ^ ) {\displaystyle ({\hat {x}},{\hat {y}})} and  ( e 1 ^ , e 2 ^ ) {\displaystyle ({\widehat {e_{1}}},{\widehat {e_{2}}})} . An important vector is the displacement from the origin, with components are typically written without subscripts:  r → = x x ^ + y y ^ {\displaystyle {\vec {r}}=x{\hat {x}}+y{\hat {y}}} . The magnitude (or absolute value or norm) of a vector is is  A ≡ | A → | = A x 2 + A y 2 {\displaystyle A\equiv |{\vec {A}}|={\sqrt {A_{x}^{2}+A_{y}^{2}}}\quad } , where the angle (or phase),  θ {\displaystyle \theta } , obeys  tan ⁡ θ = y / x {\displaystyle \tan \theta =y/x} , or (almost) equivalently,  θ = arctan ⁡ ( y / x ) {\displaystyle \theta =\arctan {(y/x)}\quad } . As with any function/inverse function pair, the tangent and arctangent are related by  tan ⁡ ( tan − 1 ⁡ X ) = X {\displaystyle \tan(\tan ^{-1}{\mathcal {X}})={\mathcal {X}}} where  X = y / x {\displaystyle {\mathcal {X}}=y/x} . The arctangent is not a true function because it is multivalued, with  tan − 1 ⁡ ( tan ⁡ θ ) = θ o r θ + π {\displaystyle \tan ^{-1}(\tan \theta )=\theta \;or\;\theta +\pi } .

The geometric interpretations of  A → + B → = C → {\displaystyle {\vec {A}}+{\vec {B}}={\vec {C}}} and  B → = C → − A → {\displaystyle {\vec {B}}={\vec {C}}-{\vec {A}}} are shown in the figure. Vector addition and subtraction can also be defined through the components:  A → + B → = C → ⇔ {\displaystyle {\vec {A}}+{\vec {B}}={\vec {C}}\Leftrightarrow } A x + B x = C x {\displaystyle A_{x}+B_{x}=C_{x}} AND  A y + B y = C y {\displaystyle A_{y}+B_{y}=C_{y}}

* See also Trigonometry/Polar, Calculus review and Fundamental theorem of calculus

### Introduction

[edit | edit source]

01 view or hide equations <\- - - - - -> wikiquizzes, etc.

| Text  | Symbol  | Factor  | Exponent

|
|
|

giga  | G  | 1000000000 | E9
mega  | M  | 1000000 | E6
kilo  | k  | 1000 | E3
(none)  | (none)  | 1  | E0
centi  | c  | 0.01  | E−2
milli  | m  | 0.001  | E−3
micro  | μ  | 0.000001 | E−6
nano  | n  | 0.000000001 | E−9
pico  | p  | 0.000000000001 | E−12

* 1 kilometer = .621 miles and 1 MPH = 1 mi/hr ≈ .447 m/s
* Typically air density is 1.2kg/m3, with pressure 105Pa. The density of water is 1000kg/m3.
* Earth's mean radius ≈ 6371km, mass ≈ 6×1024
kg, and gravitational acceleration = g ≈ 9.8m/s2
* Universal gravitational constant = G ≈ 6.67×10−11
m3·kg−1·s−2
* Speed of sound ≈ 340m/s and the speed of light = c ≈ 3×108m/s
* One light-year ≈ 9.5×1015m ≈ 63240AU (Astronomical unit)
* The electron has charge, e ≈ 1.6 × 10−19C and mass ≈ 9.11 × 10-31kg. 1eV = 1.602 × 10-19J is a unit of energy, defined as the work associated with moving one electron through a potential difference of one volt.
* 1 amu = 1 u ≈ 1.66 × 10-27 kg is the approximate mass of a proton or neutron.
* Boltzmann's constant = kB≈ 1.38 × 10-23 J K−1 , and the gas constant is R = NAkB≈8.314 J K−1 mol−1, where NA≈ 6.02 × 1023 is the Avogadro number.
* k e = 1 4 π ε 0 {\displaystyle k_{\mathrm {e} }={\frac {1}{4\pi \varepsilon _{0}}}\,} ≈ 8.987× 109 N·m²·C−2 is a fundamental constant of electricity; also  ε 0 = 1 4 π k e {\displaystyle \varepsilon _{0}={\frac {1}{4\pi k_{\mathrm {e} }}}\,} ≈ 8.854 × 10−12 F·m−1 is the vacuum permittivity or the electric constant.
* μ 0 {\displaystyle \mu _{0}\,} = 4π × 10−7 NA ≈ 1.257 × 10−6 N A (magnetic permeability) is the fundamental constant of magnetism:  ε 0 μ 0 = 1 / c {\displaystyle {\sqrt {\varepsilon _{0}\mu _{0}}}=1/c} .
* ℏ {\displaystyle \hbar } = h/(2π) ≈ 1.054×10−34 J·s the reduced Planck constant, and  a 0 = ℏ 2 k e m e e 2 {\displaystyle a_{0}={\frac {\hbar ^{2}}{k_{e}m_{e}e^{2}}}} ≈ .526 × 10−10 m is the Bohr radius.

### One dimensional kinematics

[edit | edit source]

02 view or hide equations <\- - - - - -> wikiquizzes, etc.

Difference is denoted by  d X {\displaystyle d{\mathcal {X}}} ,  δ X {\displaystyle \delta {\mathcal {X}}} , or the Delta.  Δ X = X f − X i {\displaystyle \Delta {\mathcal {X}}={\mathcal {X}}_{f}-{\mathcal {X}}_{i}} or  X − X 0 {\displaystyle {\mathcal {X}}-{\mathcal {X}}_{0}} . Average, or mean, is denoted by  X ¯ = ⟨ X ⟩ = X ave = Σ X i / N   or   Σ P i X i {\displaystyle {\bar {\mathcal {X}}}=\langle {\mathcal {X}}\rangle ={\mathcal {X}}_{\text{ave}}=\Sigma {\mathcal {X}}_{i}{\mathcal {/}}N\ {\text{or}}\ \Sigma {\mathcal {P}}_{i}{\mathcal {X}}_{i}} , where  N {\displaystyle {\mathcal {N}}} is number and  P i {\displaystyle {\mathcal {P}}_{i}} are probabilities. The average velocity is  v ¯ = Δ x / Δ t {\displaystyle {\bar {v}}=\Delta x/\Delta t} , and the average acceleration is  a ¯ = Δ v / Δ t {\displaystyle {\bar {a}}=\Delta v/\Delta t} , where  x {\displaystyle x} denotes position. In CALCULUS, instantaneous values are denoted by v(t)=dx/dt and a=dv/dt=d2x/dt2.

The equations of motion for uniform acceleration are:  x = x 0 + v 0 t + 1 2 a t 2 {\displaystyle x=x_{0}+v_{0}t+{\tfrac {1}{2}}at^{2}} , and,  v = v 0 + a t {\displaystyle v=v_{0}+at} . Also,  v 2 = v 0 2 + 2 a ( x − x 0 ) {\displaystyle v^{2}=v_{0}^{2}+2a\left(x-x_{0}\right)} , and,  x − x 0 = 1 2 ( v 0 + v ) = v ¯ t {\displaystyle x-x_{0}={\tfrac {1}{2}}(v_{0}+v)={\bar {v}}t} . Note that  v ¯ = 1 2 ( v 0 + v ) {\displaystyle {\bar {v}}={\tfrac {1}{2}}(v_{0}+v)} only if the acceleration is uniform.

### Two-Dimensional Kinematics

[edit | edit source]

03 view or hide equations <\- - - - - -> wikiquizzes, etc.

x = x 0 + v 0 x Δ t + 1 2 a x Δ t 2 {\displaystyle x=x_{0}+v_{0x}\Delta t+{\frac {1}{2}}a_{x}\Delta t^{2}} |       v x = v 0 x + a x Δ t {\displaystyle v_{x}=v_{0x}+a_{x}\Delta t} |       v x 2 = v x 0 2 + 2 a x Δ x {\displaystyle v_{x}^{2}=v_{x0}^{2}+2a_{x}\Delta x}

|
|

y = y 0 + v 0 y Δ t + 1 2 a y Δ t 2 {\displaystyle y=y_{0}+v_{0y}\Delta t+{\frac {1}{2}}a_{y}\Delta t^{2}} |       v y = v 0 y + a y Δ t {\displaystyle v_{y}=v_{0y}+a_{y}\Delta t} |       v y 2 = v x 0 2 + 2 a y Δ y {\displaystyle v_{y}^{2}=v_{x0}^{2}+2a_{y}\Delta y}

v 2 = v 0 2 + 2 a x Δ x + 2 a y Δ y {\displaystyle v^{2}=v_{0}^{2}+2a_{x}\Delta x+2a_{y}\Delta y}   ...in advanced notation this becomes Δ ( v 2 ) = 2 a → ⋅ Δ ℓ → {\displaystyle \Delta (v^{2})=2{\vec {a}}\cdot \Delta {\vec {\ell }}} .

In free fall we often set, ax=0 and ay= -g. If angle is measured with respect to the x axis:

v x = v cos ⁡ θ {\displaystyle v_{x}=v\cos \theta }        v y = v sin ⁡ θ {\displaystyle v_{y}=v\sin \theta }        v x 0 = v 0 cos ⁡ θ 0 {\displaystyle v_{x0}=v_{0}\cos \theta _{0}}        v y 0 = v 0 sin ⁡ θ 0 {\displaystyle v_{y0}=v_{0}\sin \theta _{0}}

The figure shows a Man moving relative to Train with velocity,  v → M | T {\displaystyle {\vec {v}}_{M|T}} , where the velocity of the train relative to Earth is,  v → T | E {\displaystyle {\vec {v}}_{T|E}} is the velocity of the Train relative to Earth. The velocity of the Man relative to Earth is,

v → M | E ⏟ 50 k m / h r = v → M | T ⏟ 10 k m / h r + v → T | E ⏟ 40 k m / h r {\displaystyle \underbrace {{\vec {v}}_{M|E}} _{50\;km/hr}=\underbrace {{\vec {v}}_{M|T}} _{10\;km/hr}+\underbrace {{\vec {v}}_{T|E}} _{40\;km/hr}\,} If the speeds are relativistic, define u=v/c where c is the speed of light, and this formula must be modified to:  u A | O = u A | O ′ + u O ′ | O 1 + ( u A | O ′ ) ( u O ′ | O ) {\displaystyle u_{A|O}={\frac {u_{A|O'}+u_{O'|O}}{1+(u_{A|O\,'})(u_{O\,'|O})}}}

### Dynamics: Force and Newton's Laws

[edit | edit source]

04 view or hide equations <\- - - - - -> wikiquizzes, etc.

Newton's laws of motion, can be expressed with two equations,  m a → = ∑ F → j {\displaystyle m{\vec {a}}=\sum {\vec {F}}_{j}\,} and  F → i j = − F → j i {\displaystyle {\vec {F}}_{ij}=-{\vec {F}}_{ji}} . The second represents the fact that the force that the i-th object exerts one object exerts on the j-th object is equal and opposite the force that the j-th exerts on the i-th object. Three non-fundamental forces are:

1. The normal force,  N {\displaystyle N} , is a contact forces that is perpendicular to the surface,
2. The force of friction,  f {\displaystyle f} , is a contact force that is parallel to the surface.
3. Tension,  T {\displaystyle T} , is often associated with ropes and strings. If the rope has sufficiently low weight and of all external forces act at the two ends, then this tension is distributed uniformly along the rope.
4. The fourth force is fundamental: Weight equals  m g {\displaystyle mg} , and is the force of gravity acting on an object of mass,  m {\displaystyle m} . At Earth's surface,  g ≈ 9.8 m / s 2 {\displaystyle g\approx 9.8m/s^{2}} .

The x and y components of the three forces of tension on the small grey circle where the three "massless" ropes meet are:

T 1 x = − T 1 cos ⁡ θ 1 {\displaystyle T_{1x}=-T_{1}\cos \theta _{1}} ,        T 1 y = T 1 sin ⁡ θ 1 {\displaystyle T_{1y}=T_{1}\sin \theta _{1}}
T 2 x = 0 {\displaystyle T_{2x}=0} ,                              T 2 y = − m g {\displaystyle T_{2y}=-mg}
T 3 x = T 3 cos ⁡ θ 3 {\displaystyle T_{3x}=T_{3}\cos \theta _{3}} ,          T 3 y = T 3 sin ⁡ θ 3 {\displaystyle T_{3y}=T_{3}\sin \theta _{3}}

### Friction, Drag, and Elasticity

[edit | edit source]

05 view or hide equations <\- - - - - -> wikiquizzes, etc.

* f k = μ k N {\displaystyle f_{k}=\mu _{k}N} is an approximation for the force friction when an object is sliding on a surface, where μk ("mew-sub-k") is the kinetic coefficient of friction, and N is the normal force.
* f s ≤ μ s N {\displaystyle f_{s}\leq \mu _{s}N} approximates the maximum possible friction (called static friction) that can occur before the object begins to slide. Usually μs > μk. Also, air drag often depends on speed, an effect this model fails to capture.

### Uniform Circular Motion and Gravitation

[edit | edit source]

06 view or hide equations <\- - - - - -> wikiquizzes, etc.

uniform circular motion (here the Latin d was used instead of the Greek Δ

* 2 π r a d = 360 d e g = 1 r e v {\displaystyle 2\pi \;rad=360\;deg=1\;rev} relates the radian, degree, and revolution.

* f = # revs # secs {\displaystyle f={\frac {\\#\,{\text{revs}}}{\\#\,{\text{secs}}}}} is the number of revolutions per second, called frequency.

* T = # secs # revs {\displaystyle T={\frac {\\#\,{\text{secs}}}{\\#\,{\text{revs}}}}} is the number of seconds per revolution, called period. Obviously  f T = 1 {\displaystyle fT=1} .

* ω = Δ θ Δ t {\displaystyle \omega ={\frac {\Delta \theta }{\Delta t}}} is called angular frequency (ω is called omega, and θ is measured in radians). Obviously  ω T = 2 π {\displaystyle \omega T=2\pi }

* a = v 2 r = ω v = ω 2 r {\displaystyle a={\frac {v^{2}}{r}}=\omega v=\omega ^{2}r} is the acceleration of uniform circular motion, where v is speed, and r is radius.
* v = ω r = 2 π r / T {\displaystyle v=\omega r=2\pi r/T} , where T is period.

* F = G m M r 2 = m g ∗ {\displaystyle F=G{\frac {mM}{r^{2}}}=mg^{*}} is the force of gravity between two objects, where the universal constant of gravity is G ≈ 6.674 × 10-11 m3·kg−1·s−2.

### Work and Energy *Line integrals

[edit | edit source]

07 view or hide equations <\- - - - - -> wikiquizzes, etc.

* K E = 1 2 m v 2 {\displaystyle KE={\frac {1}{2}}mv^{2}\,} is kinetic energy, where m is mass and v is speed..
* U g = m g y {\displaystyle U_{g}=mgy} is gravitational potential energy,where y is height, and  g = 9.80 m s 2 {\displaystyle g=9.80\;{\frac {m}{s^{2}}}} is the gravitational acceleration at Earth's surface.
* U s = 1 2 k s x 2 {\displaystyle U_{s}={\frac {1}{2}}k_{s}x^{2}} is the potential energy stored in a spring with spring constant k s {\displaystyle k_{s}} .
* ∑ K E f + ∑ P E f = ∑ K E i + ∑ P E i − Q {\displaystyle \sum KE_{f}+\sum PE_{f}=\sum KE_{i}+\sum PE_{i}-Q} relates the final energy to the initial energy. If energy is lost to heat or other nonconservative force, then Q>0.
* W = F ℓ cos ⁡ θ = F → ⋅ ℓ → {\displaystyle W=F\ell \cos \theta ={\vec {F}}\cdot {\vec {\ell }}} (measured in Joules) is the work done by a force  F {\displaystyle F} as it moves an object a distance  ℓ {\displaystyle \ell } . The angle between the force and the displacement is θ.
* ∑ F → ⋅ Δ ℓ {\displaystyle \sum {\vec {F}}\cdot \Delta \ell } describes the work if the force is not uniform. The steps,  Δ ℓ → {\displaystyle \Delta {\vec {\ell }}} , taken by the particle are assumed small enough that the force is approximately uniform over the small step. If force and displacement are parallel, then the work becomes the area under a curve of F(x) versus x.
* P = F → ⋅ Δ → ℓ Δ t = F → ⋅ v → {\displaystyle P={\frac {{\vec {F}}\cdot {\vec {\Delta }}\ell }{\Delta t}}={\vec {F}}\cdot {\vec {v}}} is the power (measured in Watts) is the rate at which work is done. (v is velocity.)

F → ⋅ d ℓ → = F x d x + F y d y = F r d r + F θ r d θ {\displaystyle {\vec {F}}\cdot d{\vec {\ell }}=F_{x}dx+F_{y}dy=F_{r}dr+F_{\theta }rd\theta }

proof

F → ⋅ d ℓ → = ( F x i ^ + F y j ^ ) ⋅ ( i ^ d x + j ^ d y ) {\displaystyle {\vec {F}}\cdot d{\vec {\ell }}=\left(F_{x}{\hat {i}}+F_{y}{\hat {j}}\right)\cdot \left({\hat {i}}dx+{\hat {j}}dy\right)} = F x d x ( i ^ ⋅ i ^ ) + F y d y ( j ^ ⋅ j ^ ) + ( j u n k ) ( j ^ ⋅ i ^ ) {\displaystyle =F_{x}dx({\hat {i}}\cdot {\hat {i}})+F_{y}dy({\hat {j}}\cdot {\hat {j}})+(junk)({\hat {j}}\cdot {\hat {i}})}

where  i ^ ⋅ i ^ = j ^ ⋅ j ^ = 1 {\displaystyle {\hat {i}}\cdot {\hat {i}}={\hat {j}}\cdot {\hat {j}}=1} and  i ^ ⋅ j ^ = 0 {\displaystyle {\hat {i}}\cdot {\hat {j}}=0} .

For polar coordinates, use  d ℓ → = r ^ d r + r d θ θ ^ {\displaystyle d{\vec {\ell }}={\hat {r}}dr+rd\theta {\hat {\theta }}}

### Linear Momentum and Collisions

[edit | edit source]

08 view or hide equations <\- - - - - -> wikiquizzes, etc.

* p → = m v → {\displaystyle {\vec {p}}=m{\vec {v}}} is momentum, where m is mass and  v → {\displaystyle {\vec {v}}} is velocity. The net momemtum is conserved if all forces between a system of particles are internal (i.e., come equal and opposite pairs):
* ∑ p → f = ∑ p → i {\displaystyle \sum {\vec {p}}_{f}=\sum {\vec {p}}_{i}} .
* F ¯ Δ t = Δ p {\displaystyle {\bar {F}}\Delta t=\Delta p} is the impulse, or change in momentum associated with a brief force acting over a time interval  Δ t {\displaystyle \Delta t} . (Strictly speaking,  F ¯ {\displaystyle {\bar {F}}} is a time-averaged force defined by integrating over the time interval.)

### Statics and Torque

[edit | edit source]

09 view or hide equations <\- - - - - -> wikiquizzes, etc.

* delete templates above

* τ = r F sin ⁡ θ , {\displaystyle \tau =rF\sin \theta ,\\!} is the torque caused by a force, F, exerted at a distance ,r, from the axis. The angle between r and F is θ.

The SI units for torque is the newton metre (N·m). It would be inadvisable to call this a Joule, even though a Joule is also a (N·m). The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M.[1] The lever arm is defined as either r, or r⊥. Labeling r as the lever arm allows moment arm to be reserved for r⊥.

### Rotational Motion and Angular Momentum

[edit | edit source]

10 view or hide equations <\- - - - - -> wikiquizzes, etc.

Linear motion  | Angular motion

|

x − x 0 = v 0 t + 1 2 a t 2 {\displaystyle x-x_{0}=v_{0}t+{\frac {1}{2}}at^{2}} |  θ − θ 0 = ω 0 t + 1 2 α t 2 {\displaystyle \theta -\theta _{0}=\omega _{0}t+{\frac {1}{2}}\alpha t^{2}}
v = v 0 + a t {\displaystyle v=v_{0}+at\,} |  ω = ω 0 + α t {\displaystyle \omega =\omega _{0}+\alpha t\,}
x − x 0 = 1 2 ( v 0 + v ) t {\displaystyle x-x_{0}={\frac {1}{2}}(v_{0}+v)t} |  θ − θ 0 = 1 2 ( ω 0 + ω ) t {\displaystyle \theta -\theta _{0}={\frac {1}{2}}(\omega _{0}+\omega )t}
v 2 = v 0 2 + 2 a ( x − x 0 ) {\displaystyle v^{2}=v_{0}^{2}+2a(x-x_{0})\,} |  ω 2 = ω 0 2 + 2 α ( θ − θ 0 ) {\displaystyle \omega ^{2}=\omega _{0}^{2}+2\alpha (\theta -\theta _{0})}

The following table refers to rotation of a rigid body about a fixed axis:  s {\displaystyle \mathbf {s} } is arclength,  r {\displaystyle \mathbf {r} } is the distance from the axis to any point, and  a t {\displaystyle \mathbf {a} _{\mathbf {t} }} is the tangential acceleration, which is the component of the acceleration that is parallel to the motion. In contrast, the centripetal acceleration,  a c = v 2 / r = ω 2 r {\displaystyle \mathbf {a} _{\mathbf {c} }=v^{2}/r=\omega ^{2}r} , is perpendicular to the motion. The component of the force parallel to the motion, or equivalently, perpendicular, to the line connecting the point of application to the axis is  F ⊥ {\displaystyle \mathbf {F} _{\perp }} . The sum is over  j   = 1   t o   N {\displaystyle \mathbf {j} \ =1\ \mathbf {to} \ N} particles or points of application.

Analogy between Linear Motion and Rotational motion[2] Linear motion  | Rotational motion  | Defining equation

|
|

Displacement =  x {\displaystyle \mathbf {x} } | Angular displacement =  θ {\displaystyle \theta } |  θ = x / r {\displaystyle \theta =\mathbf {x} /\mathbf {r} }
Velocity =  v {\displaystyle \mathbf {v} } | Angular velocity =  ω {\displaystyle \omega } |  ω = d θ / d t = v / r {\displaystyle \omega =\mathbf {d} \theta /\mathbf {dt} =\mathbf {v} /\mathbf {r} }
Acceleration =  a {\displaystyle \mathbf {a} } | Angular acceleration =  α {\displaystyle \alpha } |  α = d ω / d t = a t / r {\displaystyle \alpha =\mathbf {d} \omega /\mathbf {dt} =\mathbf {a_{\mathbf {t} }} /\mathbf {r} }
Mass =  m {\displaystyle \mathbf {m} } | Moment of Inertia =  I {\displaystyle \mathbf {I} } |  I = ∑ m j r j 2 {\displaystyle \mathbf {I} =\sum \mathbf {m_{j}} \mathbf {r_{j}} ^{2}}
Force =  F = m a {\displaystyle \mathbf {F} =\mathbf {m} \mathbf {a} } | Torque =  τ = I α {\displaystyle \tau =\mathbf {I} \alpha } |  τ = ∑ r j F ⊥ j = ∑ r ⊥ j F j {\displaystyle \tau =\sum \mathbf {r_{j}} \mathbf {F} _{\perp }\mathbf {_{j}} =\sum \mathbf {r_{\perp j}} \mathbf {F} _{\mathbf {_{j}} }}
Momentum=  p = m v {\displaystyle \mathbf {p} =\mathbf {m} \mathbf {v} } | Angular momentum=  L = I ω {\displaystyle \mathbf {L} =\mathbf {I} \omega } |  L = ∑ r j p j {\displaystyle \mathbf {L} =\sum \mathbf {r_{j}} \mathbf {p} \mathbf {_{j}} }
Kinetic energy =  1 2 m v 2 {\displaystyle {\frac {1}{2}}\mathbf {m} \mathbf {v} ^{2}} | Kinetic energy =  1 2 I ω 2 {\displaystyle {\frac {1}{2}}\mathbf {I} \omega ^{2}} |  1 2 ∑ m j v j 2 = 1 2 ∑ m j r j 2 ω 2 {\displaystyle {\frac {1}{2}}\sum \mathbf {m_{j}} \mathbf {v_{j}} ^{2}={\frac {1}{2}}\sum \mathbf {m_{j}} \mathbf {r_{j}} ^{2}\omega ^{2}}
Description[3] | Figure | Moment(s) of inertia

|
|

Rod of length L and mass m
(Axis of rotation at the end of the rod)  |  |  I e n d = m L 2 3 {\displaystyle I_{\mathrm {end} }={\frac {mL^{2}}{3}}\,\\!}
Solid cylinder of radius r, height h and mass m |  |  I z = m r 2 2 {\displaystyle I_{z}={\frac {mr^{2}}{2}}\,\\!}
I x = I y = 1 12 m ( 3 r 2 + h 2 ) {\displaystyle I_{x}=I_{y}={\frac {1}{12}}m\left(3r^{2}+h^{2}\right)}
Sphere (hollow) of radius r and mass m |  |  I = 2 m r 2 3 {\displaystyle I={\frac {2mr^{2}}{3}}\,\\!}
Ball (solid) of radius r and mass m |  |  I = 2 m r 2 5 {\displaystyle I={\frac {2mr^{2}}{5}}\,\\!}

### Fluid Statics

[edit | edit source]

11 view or hide equations <\- - - - - -> wikiquizzes, etc.

Pressure is the weight per unit area of the fluid above a point.

Pressure versus Depth: A fluid's pressure is F/A where F is force and A is a (flat) area. The pressure at depth,  h {\displaystyle h} below the surface is the weight (per area) of the fluid above that point. As shown in the figure, this implies:

P = P 0 + ρ g h {\displaystyle P=P_{0}+\rho gh}

where  P 0 {\displaystyle P_{0}} is the pressure at the top surface,  h {\displaystyle h} is the depth, and  ρ {\displaystyle \rho } is the mass density of the fluid. In many cases, only the difference between two pressures appears in the final answer to a question, and in such cases it is permissible to set the pressure at the top surface of the fluid equal to zero. In many applications, it is possible to artificially set  P 0 {\displaystyle P_{0}} equal to zero, for example at atmospheric pressure. The resulting pressure is called the gauge pressure, for  P g a u g e = ρ g h {\displaystyle P_{gauge}=\rho gh} below the surface of a body of water.

Buoyancy and Archimedes' principle Pascal's principle does not hold if two fluids are separated by a seal that prohibits fluid flow (as in the case of the piston of an internal combustion engine). Suppose the upper and lower fluids shown in the figure are not sealed, so that a fluid of mass density  ρ f l u {\displaystyle \rho _{flu}} comes to equilibrium above and below an object. Let the object have a mass density of  ρ o b j {\displaystyle \rho _{obj}} and a volume of  A Δ h {\displaystyle A\Delta h} , as shown in the figure. The net (bottom minus top) force on the object due to the fluid is called the buoyant force:

b u o y a n t f o r c e = ( A Δ h ) ( ρ f l u ) g {\displaystyle {\rm {{buoyant}\;{\rm {{force}=(A\Delta h)(\rho _{flu})g\,}}}}} ,

and is directed upward. The volume in this formula, AΔh, is called the volume of the displaced fluid, since placing the volume into a fluid at that location requires the removal of that amount of fluid. Archimedes principle states:

A body wholly or partially submerged in a fluid is buoyed up by a force equal to the weight of the displaced fluid.

Note that if  ρ o b j = ρ f l u {\displaystyle \rho _{obj}=\rho _{flu}} , the buoyant force exactly cancels the force of gravity. A fluid element within a stationary fluid will remain stationary. But if the two densities are not equal, a third force (in addition to weight and the buoyant force) is required to hold the object at that depth. If an object is floating or partially submerged, the volume of the displaced fluid equals the volume of that portion of the object which is below the waterline.

### Fluid Dynamics

[edit | edit source]

12 view or hide equations <\- - - - - -> wikiquizzes, etc.

A fluid element speeds up if the area is constricted.

* Δ V Δ t = V ˙ = A v = Q {\displaystyle {\frac {\Delta V}{\Delta t}}={\dot {V}}=Av=Q} the volume flow for incompressible fluid flow if viscosity and turbulence are both neglected. The average velocity is  v {\displaystyle v} and  A {\displaystyle A} is the cross sectional area of the pipe. As shown in the figure,  v 1 A 1 = v 2 A 2 {\displaystyle v_{1}A_{1}=v_{2}A_{2}} because  A v {\displaystyle Av} is constant along the developed flow. To see this, note that the volume of pipe is  Δ V = A Δ x {\displaystyle \Delta V=A\Delta x} along a distance  Δ x {\displaystyle \Delta x} . And,  v = Δ x / Δ t {\displaystyle v=\Delta x/\Delta t} is the volume of fluid that passes a given point in the pipe during a time  Δ t {\displaystyle \Delta t} .
* P 1 + ρ g y 1 + 1 2 ρ v 1 2 = P 2 + ρ g y 2 + 1 2 ρ v 2 2 {\displaystyle P_{1}+\rho gy_{1}+{\frac {1}{2}}\rho v_{1}^{2}=P_{2}+\rho gy_{2}+{\frac {1}{2}}\rho v_{2}^{2}} is Bernoulli's equation, where  P {\displaystyle P} is pressure,  ρ {\displaystyle \rho } is density, and  y {\displaystyle y} is height. This holds for inviscid flow.

### Temperature, Kinetic Theory, and Gas Laws

[edit | edit source]

13 view or hide equations <\- - - - - -> wikiquizzes, etc.

* T C = T K − 273.15 {\displaystyle T_{C}=T_{K}-273.15} converts from Celsius to Kelvins, and  T F = 9 5 T C + 32 {\displaystyle T_{F}={\frac {9}{5}}T_{C}+32} converts from Celsius to Fahrenheit.
* P V = n R T = N k B T {\displaystyle PV=nRT=Nk_{B}T} is the ideal gas law, where P is pressure, V is volume, n is the number of moles and N is the number of atoms or molecules. Temperature must be measured on an absolute scale (e.g. Kelvins).
* NAkB=R where NA= 6.02 × 1023 is the Avogadro number. Boltzmann's constant can also be written in eV and Kelvins: kB ≈8.6 × 10-5 eV/deg.
* 3 2 k B T = 1 2 m v r m s 2 {\displaystyle {\frac {3}{2}}k_{B}T={\frac {1}{2}}mv_{rms}^{2}} is the average translational kinetic energy per "atom" of a 3-dimensional ideal gas.
* v r m s = 3 k B T m = v 2 ¯ {\displaystyle v_{rms}={\sqrt {\frac {3k_{B}T}{m}}}={\sqrt {\overline {v^{2}}}}} is the root-mean-square speed of atoms in an ideal gas.
* E = ϖ 2 N k B T {\displaystyle E={\frac {\varpi }{2}}Nk_{B}T} is the total energy of an ideal gas, where  ϖ = 3 {\displaystyle \varpi =3\;}

### Heat and Heat Transfer

[edit | edit source]

14 view or hide equations <\- - - - - -> wikiquizzes, etc.

Here it is convenient to define heat as energy that passes between two objects of different temperature  Q {\displaystyle Q} The SI unit is the Joule. The rate of heat trasfer,  Δ Q / Δ t {\displaystyle \Delta Q/\Delta t} or  Q ˙ {\displaystyle {\dot {Q}}} is "power": 1 Watt = 1 W = 1J/s

* Q = m c S Δ T {\displaystyle Q=mc_{S}\Delta T} is the heat required to change the temperature of a substance of mass, m. The change in temperature is ΔT. The specific heat, cS, depends on the substance (and to some extent, its temperature and other factors such as pressure). Heat is the transfer of energy, usually from a hotter object to a colder one. The units of specfic heat are energy/mass/degree, or J/(kg-degree).
* Q = m L {\displaystyle Q=mL} is the heat required to change the phase of a a mass, m, of a substance (with no change in temperature). The latent heat, L, depends not only on the substance, but on the nature of the phase change for any given substance. LF is called the latent heat of fusion, and refers to the melting or freezing of the substance. LV is called the latent heat of vaporization, and refers to evaporation or condensation of a substance.
* Q ˙ = k c A d Δ T {\displaystyle {\dot {Q}}={\frac {k_{c}A}{d}}\Delta T} is rate of heat transfer for a material of area, A. The difference in temperature between two sides separated by a distance, d, is  Δ T {\displaystyle \Delta T} . The thermal conductivity, kc, is a property of the substance used to insulate, or subdue, the flow of heat.
* Q ˙ = σ A ϵ T 4 {\displaystyle {\dot {Q}}=\sigma A\epsilon T^{4}} is the power radiated by a surface of area, A, at a temperature, T, measured on an absolute scale such as Kelvins. The emissivity,  0 ≤ ϵ ≤ 1 {\displaystyle 0\leq \epsilon \leq 1} , is 1 for a black body, and 0 for a perfectly reflecting surface. The Stefan-Boltzmann constant is  σ ≈ 5.67 × 10 − 8 J s − 1 m − 2 K − 4 {\displaystyle \sigma \approx 5.67\times 10^{-8}\,\mathrm {J\,s^{-1}m^{-2}K^{-4}} } .

### Thermodynamics

[edit | edit source]

15 view or hide equations <\- - - - - -> wikiquizzes, etc.

* Pressure (P), Energy (E), Volume (V), and Temperature (T) are state variables (state functionscalled state functions). The number of particles (N) can also be viewed as a state variable.
* Work (W), Heat (Q) are not state variables.
* S ( V , T ) = 3 N k B 2 ln ⁡ T + N k B ln ⁡ V + c o n s t a n t {\displaystyle S(V,T)={\frac {3Nk_{B}}{2}}\ln T+Nk_{B}\ln V+constant} , is the entropy of an ideal , monatomic gas. The constant is arbitrary only in classical (non-quantum) thermodynamics. Since it is a function of state variables, entropy is also a state function.

A point on a PV diagram define's the system's pressure (P) and volume (V). Energy (E) and pressure (P) can be deduced from equations of state: E=E(V,P) and T=T(V,P). If the piston moves, or if heat is added or taken from the substance, energy (in the form of work and/or heat) is added or subtracted. If the path returns to its original point on the PV-diagram (e.g., 12341 along the rectantular path shown), and if the process is quasistatic, all state variables (P, V, E, T) return to their original values, and the final system is indistinguishable from its original state.

The net work done per cycle is area enclosed by the loop. This work equals the net heat flow into the system,  Q i n − Q o u t {\displaystyle Q_{in}-Q_{out}} (valid only for closed loops).

Remember: Area "under" is the work associated with a path; Area "inside" is the total work per cycle.

* Δ W = − F Δ x = ( − P ⋅ A r e a ) ( Δ V A r e a ) = − P Δ V {\displaystyle \Delta W=-F\Delta x=(-P\cdot \mathrm {Area} )\left({\frac {\Delta V}{\mathrm {Area} }}\right)=-P\Delta V} is the work done on a system of pressure P by a piston of voulume V. If ΔV>0 the substance is expanding as it exerts an outward force, so that ΔW<0 and the substance is doing work on the universe; ΔW>0 whenever the universe is doing work on the system.
* Δ Q {\displaystyle \Delta Q} is the amount of heat (energy) that flows into a system. It is positive if the system is placed in a heat bath of higher temperature. If this process is reversible, then the heat bath is at an infinitesimally higher temperature and a finite ΔQ takes an infinite amount of time.
* Δ E = Δ Q − P Δ V {\displaystyle \Delta E=\Delta Q-P\Delta V} is the change in energy (First Law of Thermodynamics).

CALCULUS: ∮ P   d V = Q i n − Q o u t {\displaystyle \oint P\ dV=Q_{in}-Q_{out}} .

In an isothermal expansion (contraction), temperature, T, is constant. Hence P=nRT/V and substitution yields,

∫ V i V f P d V = ∫ V i V f n R T d V V = n R T ∫ V i V f d V V = n R T ln ⁡ V f V i {\displaystyle \int _{Vi}^{Vf}PdV=\int _{Vi}^{Vf}nRT{\frac {dV}{V}}=nRT\int _{Vi}^{Vf}{\frac {dV}{V}}=nRT\ln {\frac {V_{f}}{V_{i}}}}

### Oscillatory Motion and Waves

[edit | edit source]

16 view or hide equations <\- - - - - -> wikiquizzes, etc.

* x = x 0 cos ⁡ 2 π t T 0 {\displaystyle x=x_{0}\cos {\frac {2\pi t}{T_{0}}}} describes oscillatory motion with period  T 0 {\displaystyle T_{0}} (here we use the zero-subscript to denote constants that do not vary with time).
* x ( t ) = x 0 cos ⁡ ( ω 0 t − φ ) {\displaystyle x(t)=x_{0}\cos \left(\omega _{0}t-\varphi \right)} . For example,  cos ⁡ ( ω 0 t − φ ) = sin ⁡ ω 0 t {\displaystyle \cos \left(\omega _{0}t-\varphi \right)=\sin \omega _{0}t} .
* ω 0 = k s m = 2 π T {\displaystyle \omega _{0}={\sqrt {\frac {k_{s}}{m}}}={\frac {2\pi }{T}}} for a mass-spring system with mass, m, and spring constant, ks.
* ω 0 = g L = 2 π T {\displaystyle \omega _{0}={\sqrt {\frac {g}{L}}}={\frac {2\pi }{T}}} for a low amplitude pendulum of length, L, in a gravitational field, g.
* P E = 1 2 k s x 2 {\displaystyle PE={\frac {1}{2}}k_{s}x^{2}} is the potential energy of a mass spring system.

Let x ( t ) = x 0 cos ⁡ ( ω 0 t − φ ) = {\displaystyle x(t)=x_{0}\cos \left(\omega _{0}t-\varphi \right)=} describe position:

* v ( t ) = d x / d t = − ω 0 x 0 sin ⁡ ( ω 0 t − φ ) = v 0 cos ⁡ ( ω 0 t + . . . ) {\displaystyle v(t)=dx/dt=-\omega _{0}x_{0}\sin \left(\omega _{0}t-\varphi \right)=v_{0}\cos \left(\omega _{0}t+...\right)} , where  v 0 = ω 0 x 0 {\displaystyle v_{0}=\omega _{0}x_{0}} is maximum velocity.
* a ( t ) = d v / d t = − ω 0 v 0 cos ⁡ ( ω 0 t − φ ) = a 0 cos ⁡ ( ω 0 t + . . . ) {\displaystyle a(t)=dv/dt=-\omega _{0}v_{0}\cos \left(\omega _{0}t-\varphi \right)=a_{0}\cos \left(\omega _{0}t+...\right)} , where  a 0 = ω 0 v 0 = ω 0 2 x 0 {\displaystyle a_{0}=\omega _{0}v_{0}=\omega _{0}^{2}x_{0}} , is maximum acceleration.
* F 0 = m a 0 {\displaystyle F_{0}=ma_{0}} , relates maximum force to maximum acceleration.
* E = 1 2 m v 0 2 = 1 2 k s x 0 2 {\displaystyle E={\frac {1}{2}}mv_{0}^{2}={\frac {1}{2}}k_{s}x_{0}^{2}} is the total energy.
* CALCULUS: x(t) obeys the linear homogeneous differential equation (ODE),  d 2 x d t 2 = − ω 0 2 x ( t ) {\displaystyle {\frac {d^{2}x}{dt^{2}}}=-\omega _{0}^{2}x(t)}

* f λ = v p {\displaystyle f\lambda =v_{p}} relates the frequency, f, wavelength, λ,and the phase speed, vp of the wave (also written as vw) This phase speed is the speed of individual crests, which for sound and light waves also equals the speed at which a wave packet travels.
* L = n λ n 2 {\displaystyle L={\frac {n\lambda _{n}}{2}}} describes the n-th normal mode vibrating wave on a string that is fixed at both ends (i.e. has a node at both ends). The mode number, n = 1, 2, 3,..., as shown in the figure.
* Beat frequency: The frequency of beats heard if two closely space frequencies,  f 1 {\displaystyle f_{1}} and  f 2 {\displaystyle f_{2}} , are played is  Δ f = | f 2 − f 1 | {\displaystyle \Delta f=|f_{2}-f_{1}|} .
* Musical acoustics: Frequency ratios of 2/1, 3/2, 4/3, 5/3, 5/4, 6/5, 8/5 are called the (just) "octave", "fifth", "fourth", "major-sixth", "major-third", "minor-third", and "minor-sixth", respectively.

### Physics of Hearing

[edit | edit source]

17 view or hide equations <\- - - - - -> wikiquizzes, etc.

* v s = T 273 ⋅ 331 m/s {\displaystyle v_{s}={\sqrt {\frac {T}{273}}}\cdot 331{\text{m/s}}} is the approximate speed near Earth's surface, where the temperature, T, is measured in Kelvins. A theoretical calculation is  v s = γ k B T m {\displaystyle v_{s}={\sqrt {\frac {\gamma k_{B}T}{m}}}} where  γ = ϖ + 2 ϖ {\displaystyle \gamma ={\frac {\varpi +2}{\varpi }}} for a semi-classical gas with  ϖ {\displaystyle \varpi } degrees of freedom. For a diatomic gas such as Nitrogen, γ = 1.4.
* v s = F μ {\displaystyle v_{s}={\sqrt {\frac {F}{\mu }}}} is the speed of a wave in a stretched string if  F {\displaystyle F} is the tension and  μ {\displaystyle \mu } is the linear mass density (kilograms per meter).

### Electric charge and field *Vector integration

[edit | edit source]

18 view or hide equations <\- - - - - -> wikiquizzes, etc.

* F = k e q Q r 2 = 1 4 π ϵ 0 q Q r 2 {\displaystyle F=k_{\mathrm {e} }{\frac {qQ}{r^{2}}}={\frac {1}{4\pi \epsilon _{0}}}{\frac {qQ}{r^{2}}}\,} is Coulomb's law for the force between two charged particles separated by a distance r: ke≈8.987×109N·m²·C−2, and ε0≈8.854×10−12 F·m−1.
* F → = q E → {\displaystyle {\vec {F}}=q{\vec {E}}} is the electric force on a "test charge", q, where  E = k e Q r 2 {\displaystyle E=k_{\mathrm {e} }{\frac {Q}{r^{2}}}\,} is the magnitude of the electric field situated a distance r from a charge, Q.

Consider a collection of  N {\displaystyle N} particles of charge  Q i {\displaystyle Q_{i}} , located at points  r → i {\displaystyle {\vec {r}}_{i}} (called source points), the electric field at  r → {\displaystyle {\vec {r}}} (called the field point) is:

* E → ( r → ) = 1 4 π ε 0 ∑ i = 1 N R ^ i Q i | R → i | 2 = 1 4 π ε 0 ∑ i = 1 N R → i Q i | R → i | 3 {\displaystyle {\vec {E}}({\vec {r}})={\frac {1}{4\pi \varepsilon _{0}}}\sum _{i=1}^{N}{\frac {{\widehat {\mathcal {R}}}_{i}Q_{i}}{|{\mathcal {\vec {R}}}_{i}|^{2}}}={\frac {1}{4\pi \varepsilon _{0}}}\sum _{i=1}^{N}{\frac {{\vec {\mathcal {R}}}_{i}Q_{i}}{|{\mathcal {\vec {R}}}_{i}|^{3}}}} is the electric field at the field point,  r → {\displaystyle {\vec {r}}} , due to point charges at the source points, r → i {\displaystyle {\vec {r}}_{i}} , and  R → i = r → − r → i , {\displaystyle {\vec {\mathcal {R}}}_{i}={\vec {r}}-{\vec {r}}_{i},} points from source points to the field point.

CALCULUS supplement:

E → ( r → ) = k e ∫ R ^ d Q R 2 {\displaystyle {\vec {E}}({\vec {r}})=k_{e}\int {\frac {{\hat {\mathcal {R}}}dQ}{{\mathcal {R}}^{2}}}} is the electric field due to distributed charge, where  d Q → λ d ℓ → σ d A → ρ d V {\displaystyle dQ\rightarrow \lambda d\ell \rightarrow \sigma dA\rightarrow \rho dV\;} , and  ( λ , σ , ρ ) {\displaystyle (\lambda ,\sigma ,\rho )} denote linear, surface, and volume density (or charge density), respectively.

Cartesian coordinates (x, y, z). Volume element:  d V = d x d y d z {\displaystyle dV=dxdydz} . Line element: d ℓ → = x ^ d x + y ^ d y + z ^ d z {\displaystyle d{\vec {\ell }}={\hat {x}}dx+{\hat {y}}dy+{\hat {z}}dz} . Three basic area elements:  n ^ d A = {\displaystyle {\hat {n}}dA=} z ^ d x d y {\displaystyle {\hat {z}}dxdy} , or, x ^ d y d z {\displaystyle {\hat {x}}dydz} , or, y ^ d z d x {\displaystyle {\hat {y}}dzdx} .

Cylindrical coordinates (ρ, φ, z): Volume element:  d V = ρ d r d φ d z {\displaystyle dV=\rho \,dr\,d\varphi \,dz} . Line element: d ℓ → = φ ^ r d φ + r ^ d r + z ^ d z {\displaystyle d{\vec {\ell }}={\hat {\varphi }}rd\varphi +{\hat {r}}dr+{\hat {z}}dz} . Basic area elements:  n ^ d A = ρ d φ d z ρ ^ {\displaystyle {\hat {n}}dA=\rho \,d\varphi \,dz\,{\hat {\rho }}} (side), and,  ρ d ρ d φ z ^ {\displaystyle \rho \,d\rho \,d\varphi \,{\hat {z}}} (top end).

Spherical coordinates (r, θ, φ): Volume element:  d V = r 2 d r sin ⁡ θ d θ d φ → 4 π r 2 d r {\displaystyle dV=r^{2}\,dr\,\sin \theta \,d\theta \,d\varphi \rightarrow 4\pi r^{2}dr} (if symmetry holds). Line element: d ℓ → = r ^ d r + θ ^ r d θ + φ ^ r sin ⁡ θ d φ {\displaystyle d{\vec {\ell }}={\hat {r}}\,dr+{\hat {\theta }}\,r\,d\theta +{\hat {\varphi }}\,r\,\sin {\theta }\,d\varphi } . Basic area element of a sphere:  r ^ d A = r ^ r 2 d Ω {\displaystyle {\hat {r}}dA={\hat {r}}\,r^{2}d\Omega } , where dΩ is a solid angle.

### Electric Potential and Electric Field *Gauss' law

[edit | edit source]

19 view or hide equations <\- - - - - -> wikiquizzes, etc.

* U = q V {\displaystyle U=qV} is the potential energy of a particle of charge, q, in the presence of an electric potential V.
* Δ V = − E ℓ cos ⁡ θ = E → ⋅ ℓ → {\displaystyle \Delta V=-E\ell \cos \theta ={\vec {E}}\cdot {\vec {\ell }}} (measured in Volts) is the variation in electric potential as one moves through an electric field  E {\displaystyle E} . The angle between the field and the displacement is θ. The electric potential, V, decreases as one moves parallel to the electric field.
* Δ V = − ∑ E → ⋅ Δ ℓ {\displaystyle \Delta V=-\sum {\vec {E}}\cdot \Delta \ell } describes the electric potential if the field is not uniform.
* V ( r → ) = k ∑ Q j R j {\displaystyle V({\vec {r}})=k\sum {\frac {Q_{j}}{{\mathcal {R}}_{j}}}} due to a set of charges  Q j {\displaystyle Q_{j}} at  r → j {\displaystyle {\vec {r}}_{j}} where  R → j = r → − r → j {\displaystyle {\vec {\mathcal {R}}}_{j}={\vec {r}}-{\vec {r}}_{j}} .

* Q = C V {\displaystyle Q=CV} is the (equal and opposite) charge on the two terminals of a capacitor of capicitance, C, that has a voltage drop, V, across the two terminals.
* C = ε A / d {\displaystyle C=\varepsilon A/d} is the capacitance of a parallel plate capacitor with surface area, A, and plate separation, d. This formula is valid only in the limit that d2/A vanishes. If a dielectric is between the plates, then ε>ε0≈ 8.85 × 10−12 due to shielding of the applied electric field by dielectric polarization effects.
* U = 1 2 Q V = 1 2 C V 2 = Q 2 2 C {\displaystyle U={\frac {1}{2}}QV={\frac {1}{2}}CV^{2}={\frac {Q^{2}}{2C}}} is the energy stored in a capacitor.
* u = ε 2 E 2 {\displaystyle u={\frac {\varepsilon }{2}}E^{2}} is the energy density (energy per unit volume, or Joules per cubic meter) of an electric field.

CALCULUS supplement

closed surfaces |  Ω & ∂Ω
To the left are closed surfaces. To the right are open surfaces, Ω, that possess closed boundaries,  ∂Ω.

* ∫ p → q → ∇ → f ⋅ d ℓ → = f ( q → ) − f ( p → ) {\displaystyle \int _{\vec {p}}^{\vec {q}}{\vec {\nabla }}f\cdot d{\vec {\ell }}=f({\vec {q}}\,)-f({\vec {p}}\,)} is the gradient theorem.

* ∫ Σ ∇ → × F → ⋅ d A → = ∮ ∂ Σ F → ⋅ d ℓ ^ {\displaystyle \int _{\Sigma }{\vec {\nabla }}\times {\vec {F}}\cdot {\vec {dA}}=\oint _{\partial \Sigma }{\vec {F}}\cdot d{\hat {\ell }}} is Stokes' theorem

* ∫ Ω ∇ → ⋅ F → d V = ∮ ∂ Ω F → ⋅ d A → {\displaystyle \int _{\Omega }{\vec {\nabla }}\cdot {\vec {F}}\;dV=\oint _{\partial \Omega }{\vec {F}}\cdot d{\vec {A}}} is the divergence theorem

Here, Ω is a (3-dimensional) volume and ∂Ω is the boundary of the volume, which is a (two-dimensional) surface. Also a surface is Σ, which, if open, has the boundary ∂Σ, which is a (one-dimensional) curve.

* V ( b → ) − V ( a → ) = − ∫ a → b → E → ⋅ d ℓ {\displaystyle V({\vec {b}})-V({\vec {a}})=-\int _{\vec {a}}^{\vec {b}}{\vec {E}}\cdot d\ell } in the limit that the Riemann sum becomes an integral.
* E → = − ∇ → V {\displaystyle {\vec {E}}=-{\vec {\nabla }}V} where  ∇ → {\displaystyle {\vec {\nabla }}} = x ^ ∂ / ∂ x + y ^ ∂ / ∂ y + z ^ ∂ / ∂ z {\displaystyle ={\hat {x}}\partial /\partial x+{\hat {y}}\partial /\partial y+{\hat {z}}\partial /\partial z} is the del operator.

* ε 0 ∫ E → ⋅ d A → = Q e n c l {\displaystyle \varepsilon _{0}\int {\vec {E}}\cdot {\vec {dA}}=Q_{encl}} is Gauss's law for the surface integral of the electric field over any closed surface, and  Q e n c l {\displaystyle Q_{encl}} is the total charge inside that surface.
* ∫ D → ⋅ d A → = Q f r e e {\displaystyle \int {\vec {D}}\cdot {\vec {dA}}=Q_{free}} is a useful variant if the medium is dielectric. D=εE is the electric displacement field. The permittivity, ε = (1+χ)ε0, where ε0≈ 8.85 × 10−12, and the electric susceptibility, χ, represents the degree to which the medium can be polarized by an electric field. The free charge, Qfree, represents all charges except those represented by the susceptibility, χ.

### Electric Current, Resistance, and Ohm's Law

[edit | edit source]

20 view or hide equations <\- - - - - -> wikiquizzes, etc.

* I = d Q d t   {\displaystyle I={\frac {\mathrm {d} Q}{\mathrm {d} t}}\ } defines the electric current as the rate at which charge flows past a given point on a wire. The direction of the current matches the flow of positive charge (which is opposite the flow of electrons if electrons are the carriers.)
* V = I R {\displaystyle V=IR} is Ohm's Law relating current, I, and resistance, R, to the difference in voltage, V, between the terminals. The resistance, R, is positive in virtually all cases, and if R > 0, the current flows from larger to smaller voltage. Any device or substance that obeys this linear relation between I and V is called ohmic.
* I = n q A v d r i f t {\displaystyle I=nqAv_{drift}} relates the density (n), the charge(q), and the average drift velocity (vdrift) of the carriers. The area (A) is measured by imagining a cut across the wire oriented such that the drift velocity is perpendicular to the surface of the (imaginary) cut.
* R = ρ L A   {\displaystyle R={\frac {\rho L}{A}}\ } expresses the resistance of a sample of ohmic material with a length (L) and area (A). The 'resistivity', ρ ("row"), is an intensive property of matter.
* Power is energy/time, measured in joules/second or J/s. Often called P (never p). It is measured in watts (W)
* Current is charge/time, measured in coulombs/second or C/s. Often called I or i. It is measured in amps or ampheres (A)
* Electric potential (or voltage) is energy/charge, measured in joules/coulomb or J/C. Often called V (sometimes E, emf,  E {\displaystyle {\mathcal {E}}} ). It is measured in volts (V)
* Resistance is voltage/current , measured in volts/amp or V/A. Often called R (sometimes r, Z) It is measured in Ohms (Ω).
* P = I V = I 2 R = V 2 R {\displaystyle P=IV=I^{2}R={\frac {V^{2}}{R}}} is the power dissipated as current flows through a resistor

### Circuits, Bioelectricity, and DC Instruments

[edit | edit source]

21 view or hide equations <\- - - - - -> wikiquizzes, etc.

The current entering any junction is equal to the current leaving that junction. i2 \+ i3 = i1 \+ i4 | The sum of all the voltages around the loop is equal to zero. v1 \+ v2 \+ v3 \- v4 = 0 | Resistors in parallel

|
|

Resistors in series
voltage divider

* ∑ k = 1 n I k = 0 {\displaystyle \sum _{k=1}^{n}{I}_{k}=0} and  ∑ k = 1 n V k = 0 {\displaystyle \sum _{k=1}^{n}V_{k}=0} are Kirchoff's Laws[4]
* V o u t = R 2 R 1 + R 2 V i n {\displaystyle V_{\rm {out}}={\frac {R_{2}}{R_{1}+R_{2}}}V_{\rm {in}}} for the voltage divider shown.

In this example, we assume that the rectangular element is a resistor, R, and that the internal resistance of the voltage source (not shown) is also R. The ammeter and voltmeter shown are ideal. Charging and discharging a capacitor with the alternating switch shown to the left (i.e. where the RC rise and discharge times are equal).

* Simple RC circuit[5] The figure to the right depicts a capacitor being charged by an ideal voltage source. If, at t=0, the switch is thrown to the other side, the capacitor will discharge, with the voltage, V , undergoing exponential decay:

V ( t ) = V 0 e − t R C   , {\displaystyle V(t)=V_{0}e^{-{\frac {t}{RC}}}\ ,}

where V0 is the capacitor voltage at time t = 0 (when the switch was closed). The time required for the voltage to fall to  V 0 e ≈ .37 V 0 {\displaystyle {\frac {V_{0}}{e}}\approx .37V_{0}} is called the RC time constant and is given by

τ = R C   . {\displaystyle \tau =RC\ .}

### Magnetism

[edit | edit source]

22 view or hide equations <\- - - - - -> wikiquizzes, etc.

* F = q v B sin ⁡ θ   {\displaystyle F=qvB\sin \theta \ } is the force on a particle with charge q moving at velocity v with in the presence of a magnetic field B. The angle between velocity and magnetic field is θ and the force is perpeduclar to both velocity and magnetic field by the right hand rule.
* F → = q v → × B → {\displaystyle {\vec {F}}=q{\vec {v}}\times {\vec {B}}} expresses this result as a cross product.
* Δ F → = I Δ ℓ → × B → {\displaystyle \Delta {\vec {F}}=I\Delta {\vec {\ell }}\times {\vec {B}}} is the force a straight wire segment of length  Δ ℓ {\displaystyle \Delta \ell } carrying a current, I.
* F → = I ∑ Δ ℓ × B →   {\displaystyle {\vec {F}}=I\sum \Delta \ell \times {\vec {B}}\ } expresses thus sum over many segments to model a wire.
* CALCULUS: In the limit that  Δ ℓ → 0 {\displaystyle \Delta \ell \rightarrow 0} we have the integral,  F → = I ∮ d ℓ × B → {\displaystyle {\vec {F}}=I\oint d\ell \times {\vec {B}}} .

* Defining magnetic force and field without calculus:

1.   B = μ 0 I 2 π r {\displaystyle B={\frac {\mu _{0}I}{2\pi r}}} is the magnetic field at a distance r from an infinitely long wire carrying a current, where μ0 = 4π × 10−7 N A. This field points azimuthally around the wire in a direction defined by the right hand rule. Application of the force law on a current element, we have
2.   F = μ 0 I 1 I 2 ℓ 2 π r {\displaystyle F={\frac {\mu _{0}I_{1}I_{2}\,\ell }{2\pi r}}} is the force between two long wires of length  ℓ {\displaystyle \ell } separated by a short distance  r << ℓ {\displaystyle r<<\ell } . The currents are I1 and I2, with the force being attractive if the currents are flowing in the same direction.

Cyclotron motion: For a particle moving perpendicular to B, we have cyclotron motion. Recall that for uniform circular motion, the acceleration is a=v2/r, where r is the radius. Since sin θ =1, Newton's second law of motion (F=ma) yields,

m a = m v 2 r = q v B {\displaystyle ma={\frac {mv^{2}}{r}}=qvB}

Since, sin θ =0, for motion parallel to a magnetic field, particles in a uniform magnetic field move in spirals at a radius which is determined by the perpendicular component of the velocity:

r = m v ⊥ q B {\displaystyle r={\frac {mv_{\perp }}{qB}}}

Hall effect: The Hall effect occurs when the magnetic field, velocity, and electric field are mutually perpendicular. In this case, the electric and magnetic forces are aligned, and can cancel if qE=qvB (since sinθ = 1). Since both terms are porportional to charge, q, the appropriate ratio of electric to magnetic field for null net force depends only on velocity:

E = v B = e m f ℓ {\displaystyle E=vB={\frac {\mathrm {emf} }{\ell }}} ,

where we have used the fact that voltage (i.e. emf or potential) is related to the electric field and a displacement parallel to that field: ΔV = -E Δs cosθ

CALCULUS supplement:

* B → = ∮ μ 0 4 π I d ℓ → × r ^ | r | 2 {\displaystyle {\vec {B}}=\oint {\frac {\mu _{0}}{4\pi }}{\frac {Id{\vec {\ell }}\times {\hat {r}}}{|r|^{2}}}} and the volume integral  ∫ μ 0 4 π J → × r ^ | r | 2 d τ ′ {\displaystyle \int {\frac {\mu _{0}}{4\pi }}{\frac {{\vec {J}}\times {\hat {r}}}{|r|^{2}}}d\tau '} , where  J → {\displaystyle {\vec {J}}} is current density.
* ∮ B → ⋅ d ℓ → = μ 0 I e n c l {\displaystyle \oint {\vec {B}}\cdot d{\vec {\ell }}=\mu _{0}I_{encl}} is Ampere's law relating a closed integral involving magnetic field to the total current enclosed by that path.

### Electromagnetic Induction, AC Circuits, and Electrical Technologies

[edit | edit source]

23 view or hide equations <\- - - - - -> wikiquizzes, etc.

In rod's frame the force on carriers is electric, not magnetic. (See railgun)

* E → = v → × B → {\displaystyle {\vec {E}}={\vec {v}}\times {\vec {B}}} is a consequence of the magnetic force law as seen in the reference frame of a moving charged object, where E is the electric field perceived by an observer moving at velocity v in the presence of a magnetic vield, B. Also written as, E = vBsinθ, this can be used to derive Faraday's law of induction. (Here, θ is the angle between the velocity and the magnetic field.)
* Φ = A → ⋅ B → = A B cos ⁡ θ {\displaystyle \Phi ={\vec {A}}\cdot {\vec {B}}=AB\cos \theta } is the magnetic flux, where θ is the angle between the magnetic field and the normal to a surface of area, A.
* e m f = − N Δ Φ Δ t {\displaystyle emf=-N{\frac {\Delta \Phi }{\Delta t}}} is Faraday's law where t is time and N is the number of turns. The minus sign reminds us that the emf, or electromotive force, acts as a "voltage" that opposes the change in the magnetic field or flux.

### Electromagnetic Waves

[edit | edit source]

24 view or hide equations <\- - - - - -> wikiquizzes, etc.

* ϵ 0 ∂ E → / ∂ t {\displaystyle \epsilon _{0}\partial {\vec {E}}/\partial t} is called the displacement current because it replaces the current density when using Ampère's circuital law to calculate the line integral of the magnetic field around a closed loop.

Maxwell's equations hold for all volumes and closed surfaces. In vacuum, electromagnetic waves travel at the speed,  c = 1 ϵ 0 μ 0 {\displaystyle c={\frac {1}{\sqrt {\epsilon _{0}\mu _{0}}}}} .

∮ S E ⋅ d A = 1 ϵ 0 ∫ V ρ d V {\displaystyle \oint _{S}\mathbf {E} \cdot \mathrm {d} \mathbf {A} ={\frac {1}{\epsilon _{0}}}\int _{V}\rho \,\mathrm {d} V} |  ∮ C E ⋅ d l = − ∫ S ∂ B ∂ t ⋅ d A {\displaystyle \oint _{C}\mathbf {E} \cdot \mathrm {d} \mathbf {l} =-\int _{S}{\frac {\partial \mathbf {B} }{\partial t}}\cdot \mathrm {d} \mathbf {A} }

|

∮ S B ⋅ d A = 0 {\displaystyle \oint _{S}\mathbf {B} \cdot \mathrm {d} \mathbf {A} =0} |  ∮ C B ⋅ d l = μ 0 ∫ S J ⋅ d A + ϵ 0 μ 0 ∫ S ∂ E ∂ t ⋅ d A {\displaystyle \oint _{C}\mathbf {B} \cdot \mathrm {d} \mathbf {l} =\mu _{0}\int _{S}\mathbf {J} \cdot \mathrm {d} \mathbf {A} +\epsilon _{0}\mu _{0}\int _{S}{\frac {\partial \mathbf {E} }{\partial t}}\cdot \mathrm {d} \mathbf {A} }

### Geometric Optics

[edit | edit source]

25 view or hide equations <\- - - - - -> wikiquizzes, etc.

1 S 1 + 1 S 2 = 1 f {\displaystyle {\frac {1}{S_{1}}}+{\frac {1}{S_{2}}}={\frac {1}{f}}} relates the focal length f of the lens, the image distance S1, and the object distance S2. The figure depicts the situation for which (S1, S2, f) are all positive: (1)The lens is converging (convex); (2) The real image is to the right of the lens; and (3) the object is to the left of the lens. If the lens is diverging (concave), then f < 0\. If the image is to the left of the lens (virtual image), then S2 < 0 .

### Vision and Optical Instruments

[edit | edit source]

26 view or hide equations <\- - - - - -> wikiquizzes, etc.

### Wave Optics

[edit | edit source]

27 view or hide equations <\- - - - - -> wikiquizzes, etc.

* S sin ⁡ θ = n λ {\displaystyle S\sin \theta =n\lambda }  where  n = 1 , 2 , 3 , 4... {\displaystyle n=1,2,3,4...} describes the constructive interference associated with two slits in the Fraunhoffer (far field) approximation.

* cos ⁡ ( ω 1 t ) + cos ⁡ ( ω 2 t ) = A ( t ) cos ⁡ ( ω ¯ t ) {\displaystyle \cos \left(\omega _{1}t\right)+\cos \left(\omega _{2}t\right)=A(t)\cos \left({\bar {\omega }}t\right)} where  ω ¯ {\displaystyle {\bar {\omega }}} is the high frequency carrier and  A ( t ) = 2 cos ⁡ ( Δ ω 2 t ) {\displaystyle A(t)=2\cos \left({\frac {\Delta \omega }{2}}t\right)} is the slowly varying envelope. Here,

ω ¯ = ω 1 + ω 2 2 {\displaystyle {\bar {\omega }}={\frac {\omega _{1}+\omega _{2}}{2}}} and  Δ ω = ω 2 − ω 1 {\displaystyle \Delta \omega =\omega _{2}-\omega _{1}} . Consequently, the beat frequency heard when two tones of frequency  f 1 {\displaystyle f_{1}} and  f 2 {\displaystyle f_{2}} is  Δ f = f 2 − f 1 {\displaystyle \Delta f=f_{2}-f_{1}} .

* c o s ( k ℓ 1 − ω t ) + c o s ( k ℓ 2 − ω t ) = 2 c o s ( k Δ ℓ ) cos ⁡ ( ω t − ϕ ) {\displaystyle cos\left(k\ell _{1}-\omega t\right)+cos\left(k\ell _{2}-\omega t\right)=2cos\left(k\Delta \ell \right)\cos(\omega t-\phi )} models the addition of two waves of equal amplitude but different path length,  Δ ℓ = ℓ 2 − ℓ 1 {\displaystyle \Delta \ell =\ell _{2}-\ell _{1}} .

### Special Relativity

[edit | edit source]

28 view or hide equations <\- - - - - -> wikiquizzes, etc.

### Introduction to Quantum Physics

[edit | edit source]

29 view or hide equations <\- - - - - -> wikiquizzes, etc.

### Atomic Physics

[edit | edit source]

30 view or hide equations- - - wikiquizzes, etc.

### Radioactivity and Nuclear Physics

[edit | edit source]

31 view or hide equations <\- - - - - -> wikiquizzes, etc.

### Medical Applications of Nuclear Physics

[edit | edit source]

32 view or hide equations <\- - - - - -> wikiquizzes, etc.

### Particle Physics

[edit | edit source]

33 view or hide equations <\- - - - - -> wikiquizzes, etc.

### Frontiers of Physics

[edit | edit source]

34 view or hide equations <\- - - - - -> wikiquizzes, etc.

### Appendix A Atomic Masses

[edit | edit source]

### Appendix B Selected Radioactive Isotopes

[edit | edit source]

### Appendix C Useful Information

[edit | edit source]

### Appendix D Glossary of Key Symbols and Notation

[edit | edit source]

### Index to openstax Physics

[edit | edit source]

## Indexes

[edit | edit source]

* SEARCH Physics equations:   Category:Physics equations/Quizzes   Category:Physics equations/node index   Category:Physics equations/supplement

Previous exams   Work in progress  Labs

references are hidden

1. ↑ https://en.wikipedia.orghttps://en.wikiversity.org/w/index.php?title=Torque&oldid=582917749
2. ↑ "Linear Motion vs Rotational motion" (PDF).
3. ↑ https://en.wikipedia.orghttps://en.wikiversity.org/w/index.php?title=List_of_moments_of_inertia&oldid=582953751
4. ↑ https //en.wikipedia.orghttps://en.wikiversity.org/w/index.php?title=Kirchhoff's_circuit_laws&oldid=579357795
5. ↑ From https://en.wikipedia.orghttps://en.wikiversity.org/w/index.php?title=RC_circuit&oldid=598786790

Edits

List of abbreviations:

Wikidata edit

This edit created a new page (also see list of new pages)

This is a minor edit

This edit was performed by a bot
(±123)
The page size changed by this number of bytes

#### 16 July 2025

| | |   m   20:51 |  Physics equations/Rewrite diffhist −7 Mickie-Mickie discuss contribs (duplicated definite article)

|
|
|
|

| | |   m   02:16 |  Wright State University Lake Campus/University Physics Volume 1/Equations diffhist −8 Mickie-Mickie discuss contribs (duplicated definite articles)

|
|
|
|

#### 15 July 2025

| | |   m   17:05 |  Physics equations/Equations diffhist −8 Mickie-Mickie discuss contribs (duplicated definite articles)

|
|
|
|

#### 12 July 2025

| | |   m   21:26 |  Wright State University Lake Campus/University Physics Volume 1/Equations diffhist −2 Mickie-Mickie discuss contribs (→14-Heat and Heat Transfer:  typo: duplication)

|
|
|
|

Link to any subpages this page might have
*[m]: This is a minor edit