Electoral systems in Louisiana
From Ballotpedia - Reading time: 24 min
 in Louisiana |
The term electoral system can refer to the method by which elections are conducted (e.g., whether officials are elected in single-winner versus multi-winner systems) or the method by which votes are tallied to determine the outcome of an election (e.g., plurality systems, majority systems, ranked-choice voting systems, etc.). In the United States, most federal and state-level officials are elected via plurality vote in single-winner contests, although some jurisdictions (e.g., cities, school boards, etc.) employ alternative electoral systems.
See the sections below for additional information on the following topics:
- Background: This section defines and describes methods for conducting elections, including single-winner systems and multi-winner systems. This section also defines and describes various vote-tallying methods, including plurality voting, majority voting, ranked-choice voting, block voting, single voting, and cumulative voting.
- Electoral systems used in Louisiana: This section outlines the electoral systems used in federal elections (i.e., elections for president and United States senators and representatives) and state-level contests (i.e., elections for state legislators, governors, and other state executives).
- State legislation and ballot measures: This section lists state legislation and state and local ballot measures relevant to electoral systems policy.
Background[edit]
The term electoral system can refer to two distinct, yet related, concepts: the method for conducting elections and the method for tallying votes to determine electoral outcomes.
Methods for conducting elections[edit]
Generally speaking, elections can take one of two basic forms: single-winner or multi-winner. In a single-winner election, one candidate alone can be elected to the office in question. In a multi-winner election, by contrast, multiple candidates can be elected to the same office.[1][2]
- A single-winner system is one in which one candidate is elected for an office. Elections for the presidency of the United States are single-winner contests; because the United States Constitution provides for a single chief executive, no more than one person can serve in that capacity at any given moment. Elections for the United States House of Representatives are also single-winner contests, as each district is permitted to elect a single representative.[1][2]
- A multi-winner system is one in which multiple candidates are elected to an office. Elections for at-large city council seats are sometimes multi-winner contests. For example, there may be three at-large council seats up for election in a given year. In some of these elections, voters are asked to select up to three choices on their ballots. The top three vote-getters win election to the at-large seats. Some state legislative chambers in the United States use multi-member districts, which elect multiple members. Proportional representation systems are a specific class of multi-winner systems in which offices are allocated to candidates or political parties in proportion to their share of the total vote.[1][2][3]
Methods for tallying votes to determine electoral outcomes[edit]
Single-winner system methods[edit]
Vote-tallying methods for single-winner election systems include, but are not limited to, the following:
- Plurality voting system: In plurality systems, the candidate who wins the largest share of the vote wins the election. The candidate need not win an outright majority to be elected. These systems are sometimes referred to as first-past-the-post or winner-take-all.[1][3]
- Majority voting system: In majority systems, a candidate must win at least 50 percent of the vote in order to win the election. In the event that no candidate wins an outright majority, a runoff election is held between the top two vote-getters. For this reason, majority systems are sometimes referred to as two-round systems.[1][3]
- Single-winner ranked-choice voting system: In a single-winner ranked-choice voting system, voters rank candidates by preference on their ballots. If a candidate wins a majority of first-preference votes, he or she is declared the winner. If no candidate wins a majority of first-preference votes, the candidate with the fewest first-preference votes is eliminated. Votes cast for the eliminated candidate are transferred to second-preference choices (if a ballot lists only the eliminated candidate, the vote is considered exhausted and is removed from future tallies). A new tally is conducted to determine whether any remaining candidate has won a majority of the remaining votes. The process is repeated until a candidate wins an outright majority. This system is sometimes referred to as an instant-runoff system.[1][4]
Multi-winner system methods[edit]
Vote-tallying methods for multi-winner election systems include, but are not limited to, the following:
- Block voting system: In a block voting system, a voter can select as many candidates as there are open seats. The candidates with the greatest number of votes are elected. If, for example, there are three at-large city council seats up for election and six candidates for those seats, the top three vote-getters would win election to those seats.[1]
- Single voting system: In a single voting system, each voter can select one candidate, regardless of the number of open seats. The candidates with the greatest number of votes are elected (for example, if there are three open seats, the three candidates with the greatest number of votes will win the election).[1]
- Cumulative voting: In a cumulative voting system, each voter can cast a number of votes equal to the number of seats up for election. A voter can allocate all of these votes to a single candidate or distribute them among several candidates. If, for example, there are three city council seats up for election, a voter can cast all three of those votes for a single candidate or split them among the three candidates (e.g., casting two votes for one candidate and one for another, etc.). The candidates with the highest number of votes win.[1]
Electoral systems used in Louisiana[edit]
- See also: Louisiana majority-vote system
The states have the authority to determine which electoral systems they will use in contests for state-level offices. The systems used in contests for federal office must adhere to federal constitutional guidelines, as well as applicable state laws.
Federal elections[edit]
Article II, Section 1, of the United States Constitution provides that the President of the United States is elected by the Electoral College via majority vote in a single-winner contest. Of the 50 states, all but two award all of their presidential electors to the presidential candidate who wins the popular vote in the state (Maine and Nebraska each award two of their electors to the candidate who wins a plurality of the statewide vote; the remaining electors are allocated to the winners of the plurality vote in the states' congressional districts).[5]
Article I, Section 4, of the United States Constitution grants the states the authority to determine the rules by which they elect their United States Senators and Representatives, unless the United States Congress acts to change those rules:[6]
| “ | The Times, Places and Manner of holding Elections for Senators and Representatives, shall be prescribed in each State by the Legislature thereof; but the Congress may at any time by Law make or alter such Regulations, except as to the Places of chusing Senators.[7] | ” |
| —Article I, Section 4, of the United States Constitution | ||
Article I and the Seventeenth Amendment of the United States Constitution establish that each state selects two United States Senators in staggered elections. In 1967, the United States Congress passed a law requiring that each state establish single-winner districts and exclusively elect their United States Representatives from those districts. Consequently, in every state, United States Senators and United States Representatives are elected in single-winner contests. A majority of states determine winners in these contests via plurality vote. In Louisiana, winners in congressional contests are determined via majority vote. If no candidate in a congressional contest wins an outright majority of the votes cast in the general election, a runoff election is held between the top two vote-getters.[8][9]
State-level elections[edit]
All elective state executive officers (e.g., governors, secretaries of state, treasurers, etc.) in the United States are selected via single-winner contests. A total of 41 states conduct only single-winner contests for their state legislative elections. The 9 remaining states conduct multi-winner contests for some state legislative seats: Arizona, Idaho, Maryland, New Hampshire, New Jersey, North Dakota, South Dakota, Vermont, and West Virginia. Plurality counts are generally used to determine electoral outcomes, though some states and jurisdictions use other tabulation methods (for example, Louisiana employs a majority voting/two-round system in which a runoff general election is held if no candidate for congressional or state-level office wins a majority of the vote in the first round of voting).[8]
The table below details the electoral systems used in Louisiana for state legislative and state executive offices as of July 2017.
| Electoral systems for state-level offices in Louisiana | |||
|---|---|---|---|
| Office | Single-winner or multi-winner | Vote tabulation method | |
| Louisiana House of Representatives | Single-winner[10] | Majority (if no candidate wins an outright majority of votes cast in the first round of voting, a second round of voting is held between the top two vote-getters)[9] | |
| Louisiana State Senate | Single-winner[10] | Majority (if no candidate wins an outright majority of votes cast in the first round of voting, a second round of voting is held between the top two vote-getters)[9] | |
| State executives (e.g., governor, attorney general, etc.) | Single-winner[11] | Majority (if no candidate wins an outright majority of votes cast in the first round of voting, a second round of voting is held between the top two vote-getters)[9] | |
| Louisiana Public Service Commission | Single-winner[12] | Majority (if no candidate wins an outright majority of votes cast in the first round of voting, a second round of voting is held between the top two vote-getters)[9] | |
State legislation and ballot measures[edit]
[edit]
The table below lists bills related to electoral systems that have been introduced during (or carried over to) the current legislative session in Louisiana. The following information is included for each bill:
- State
- Bill number
- Official name or caption
- Most recent action date
- Legislative status
- Topics dealt with by the bill
Bills are organized alphabetically, first by state and then by bill number. The table displays up to 100 results by default. To view additional results, use the arrows in the upper-right corner of the table. For more information about a particular bill, click the bill number. This will open a separate page with additional information.
Electoral systems ballot measures[edit]
Ballotpedia has tracked no ballot measures relating to electoral systems in Louisiana.
Ballotpedia's Election Administration Legislation Tracker[edit]
State election laws are changing. Keeping track of the latest developments in all 50 states can seem like an impossible job.
Here's the solution: Ballotpedia's Election Administration Legislation Tracker.
Ballotpedia's Election Administration Tracker sets the industry standard for ease of use, flexibility, and raw power. But that's just the beginning of what it can do:
- Ballotpedia's election experts provide daily updates on bills and other relevant political developments
- We translate complex bill text into easy-to-understand summaries written in everyday language
- And because it's from Ballotpedia, our Tracker is guaranteed to be neutral, unbiased, and nonpartisan
The Ballot Bulletin[edit]
The Ballot Bulletin is a weekly email that delivers the latest updates on election policy. The Ballot Bulletin tracks developments in election policy around the country, including legislative activity, big-picture trends, and recent news. Each email contains in-depth data from our Election Administration Legislation Tracker. You'll also be able to track relevant legislation, with links to and summaries of the bills themselves.
Recent issues[edit]
Click below to view recent issues of The Ballot Bulletin.
- The Ballot Bulletin: November 1, 2024
- The Ballot Bulletin: October 25, 2024
- The Ballot Bulletin: October 18, 2024
- The Ballot Bulletin: October 11, 2024
- The Ballot Bulletin: October 4, 2024
Subscribe[edit]
Enter your email address below to subscribe to The Ballot Bulletin.
See also[edit]
Select a state on the map below to read more about electoral systems in that state.
External links[edit]
Footnotes[edit]
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 FairVote, "Electoral Systems," accessed July 7, 2017
- ↑ 2.0 2.1 2.2 International Political Science Review, "Choosing Electoral Systems: Proportional, Majoritarian and Mixed Systems," July 1997
- ↑ 3.0 3.1 3.2 Georgetown University, "Electoral Systems," accessed July 7, 2017
- ↑ MinneapolisMN.gov, "Frequently Asked Questions about Ranked-Choice Voting," accessed July 7, 2017
- ↑ United States Constitution, "Article II, Section 1," accessed July 7, 2017
- ↑ United States Constitution, "Article I, Section 4," accessed July 7, 2017
- ↑ Note: This text is quoted verbatim from the original source. Any inconsistencies are attributable to the original source.
- ↑ 8.0 8.1 FairVote, "Electoral Systems in the United States," accessed July 7, 2017 Cite error: Invalid
<ref>tag; name "winnertakeall" defined multiple times with different content - ↑ 9.0 9.1 9.2 9.3 9.4 Louisiana Secretary of State, "Review Types of Elections," accessed July 24, 2017
- ↑ 10.0 10.1 Louisiana Constitution, "Article III, Section 1," accessed July 24, 2017
- ↑ Composition; Number of Departments; Reorganization Louisiana Constitution, "Article IV, Section 1," accessed July 24, 2017
- ↑ Composition; Number of Departments; Reorganization Louisiana Constitution, "Article IV, Section 21," accessed July 24, 2017
| |||||||||||
EncycloReader
is supported by the 
KSF