Tetration

From Citizendium - Reading time: 28 min

Tetration is a rapidly growing mathematical function, which was introduced in the 20th century and proposed for the representation of huge numbers in the Mathematics of Computation. For positive integer values of its argument x, tetration tetb(x) on base b can be defined with:

 tetb(x)=  bbbx

Fig.1. Tetration tetb(x) for various b>1 versus x.

For real values of the argument x and various values of the base b, this tetb(x) is plotted in Fig.0.

Fig.1. Tetration f=tetb(x) in the x,b plane with levels g=const.

The map of f=tetb(x) in the x,b plane is shown in Fig.1 with levels f=const.

Up to year 2011, this function has not been listed among elementary functions, it is not implemented in programming languages and it is not used for the internal representation of data in computers.

In this article, the generalizaiton of tetration for complex (and, in particular, real) values of its argument is described. At base b>1, tetration is assumed to be a holomorphic function, at least for positive values of the real part of its argument. This tetration is used to construct the holomorphic extension of the iterated exponential expc(z) for the case of non-integer values of the number c of iterations.

Definition[edit]

For real b>1, Tetration F=tetb on the base b is a function of a complex variable, which is holomorphic at least in the range {z:(z)>2}, bounded in the range {z:|(z)|1}, and satisfies conditions

F(z+1)=expb(F(z))
F(0)=1
F(z*)=F(z)*

at least within the range (z)>2 .

According to this definition, tetration is superfunction of the exponential. This justifies the alternative name "superexponential" for this function and "superlogarithm" for the inverse function. The definition above generalizes the definitions, recently suggested for the specific cases of base b=e [1] and b=2 [2].

Etymology and place of tetration in the big picture of math[edit]

Creation of word tetration is attributed to the English mathematician Reuben Louis Goodstein [3].

The place of tetration in the mathematical analysis can be seen at the strong zoom-out of the big picture of math. Using mathematical notation, the zoom-out of the mathematical analysis can be drawn as follows:

++ has only one argument and means unitary increment
addb(1)=b+1=++(b) ; addb(z+1)=b+(z+1)=++(b+(z))
mulb(1)=b*1=b ; mulb(z+1)=b*(z+1)=b+(b*(z))
expb(1)=b1=b ; expb(z+1)=b*(expb(z))
tetb(1)=b ; tetb(z+1)=expb(tetb(z))
penb(1)=b ; penb(z+1)=tetb(penb(z))

Except the zeroth row, each operation in the sequence above is just a recurrence of operations from the previous row. Operation ++ could be called zeration (although in programming languages it is called increment), addition (or summation) could be called unation, multiplication (or product) could be called duation , exponentiation could be called trination. The following operations ( tetration, pentation) have not been used so often, at least up to the year 2008. Although tetration has been given many other names: superexponentiation [4], ultraexponent [5], generalized exponent [6], other names were not applied to the holomorphic extension of tetration, defined in the previous section.

Manipulation with the holomorphic extensions and the inverses of summation, multiplication, exponentiation form the core of the mathematical analysis. The table above shows the place of tetration in the big picture of math, in the penultimate row.

In the scheme above, each next operation appears as a superfunction with respect to the previous one. In such a way, the name tetration indicates, that this operation is fourth (id est, tetra) in the hierarchy of operations after summation, multiplication, and exponentiation. In principle, one can define "pentation", "sextation", "septation" in a similar manner, although tetration, perhaps, already has a growth rate fast enough for the requirements of the 21st century.

Real values of the arguments, general view[edit]

Examples of behavior of this function at the real axis are shown in figure 1 for values b=e, b=2, b=exp(1/e), and for b=2. It has a logarithmic singularity at 2, and it is a monotonic increasing function.

At bexp(1/e) tetration tetb(x) approaches its limiting value as x+, and limx+tetb(x)>1.

Fast growth and application[edit]

For b>exp(1/e) tetration tetb(x) grows faster than any exponential function. For this reason tetration has been proposed for the representation of huge numbers in the Mathematics of Computation[4]. A number that cannot be stored as floating point could be represented as tetb(x) for some standard value of b (for example, b=2 or b=e) and relatively moderate value of x. The analytic properties of tetration could be used for the implementation of arithmetic operations with huge numbers without to convert them to the floating point representation.

Integer values of the argument[edit]

For integer z, tetration tetb(z) can be interpreted as iterated exponential:

tetb(1)=b
tetb(2)=bb
tetb(3)=bbb

and so on; then, the argument of tetration can be interpreted as number of exponentiations of unity. From definition it follows, that

tetb(0)=1

and

tetb(1)=0

Relation with the Ackermann function[edit]

At base b=2, tetration is related to the Ackermann function [7]

tet2(n+3)=A(4,n)+3

where the Ackermann function A is defined, for non-negative integer values of its arguments, by the following equations

A(m,n)={n+1,ifm=0A(m1,1),ifm>0 and n=0A(m1,A(m,n1)),ifm>0 and n>0

The generalization of the 4th Ackermann function A(4,z) for the complex values of z is described in the preprint [2] . Construction of such holomorphic extension is equivalent to construction of tetration tetb(z) for the base b=2.

Asymptotic behavior and properties of tetration[edit]

The analytic extension of tetration F(z) grows rapidly along the real axis of the complex z-plane, at least for some values of base b. However, it does not grow infinitely in the direction of imaginary axis. The asymptotic behavior determines the basic properties of tetration.

The exponential convergence of discrete iteration of logarithm corresponds to the exponential asymptotic behavior

F(z)=L+ε(z)+o(ε(z)2)

where

ε(z)=exp(Qz+r),

Q and r are fixed complex numbers, and L is eigenvalue of logarithm, solution of equation

x=logb(x).
© Image: Dmitrii Kouznetsov
FIg.2. Graphic solution of equation x=logb(x) for b=2 (two real solutions, x=2 and x=4), b=exp(1/e) (one real solution x=e), and b=2 (no real solutions).

Solutions of this equation are called fixed points of logarithm.

Fixed points of logarithm[edit]

Three examples of graphical solution of equation for fixed points of logarithm are shown in figure 2 for b=2, b=exp(1/e), and b=2.

The black line shows function y=x in the x,y plane. The colored curves show function y=logb(x) for cases b=2 (red), b=exp(1/e) (green), and b=2 (blue).

At b=2, there exist 2 solutions, x=2 and x=4.

At b=exp(1/e) there exists one solution x=e.

and b=2, there are no real solutions.

In general,

  • at b<exp(1/e) , there are two real solutions;
  • at b=exp(1/e) , there is one solution, and
  • at b>exp(1/e) , there exist two solutions, but they are complex.

In particular, at b=2, the solutions are
L=L2,1=2 and L=L2,2=4
.

At b=2, the solutions are
L=L20.824678546142074222314065+1.56743212384964786105857i and
L=L2*0.8246785461420742223140651.56743212384964786105857i.

At b=e, the solutions are
L=Le0.318131505204764135312654+1.33723570143068940890116i and
L=Le*0.3181315052047641353126541.33723570143068940890116i.

A few hundred straightforward iterations of equation L=logb(L) are sufficient to get the error smaller than the last decimal digit in the approximations above.

Basic properties[edit]

FIg.3. parameters of asymptotic of tetration versus logarithm of the base

The solutions L=L1 and L=L2 of equation (14) are plotted in figure 3 versus β=ln(b) with thin black lines. At β<1/e, both L1 and L2 are real and positive. Let L1<L2, and only at ln(b)=1/e, the equality L1=L2 takes place. Basic properties of tetration are determined by the base b. The main parameters versus ln(b) are plotted in figure 3. The thin black solid curve at β1/e represents the real part of the solutions L and L* of (14); the thin black dashed curve represents the two options for the imaginary part; the two solutions are complex conjugations of each other. Requirement of definition of tetration determine the asymptotic of the solution. Parameter Q determines periodicity of quasi-periodicity of tetration. The two solutions for Q are shown in figure 3 with green lines.

At b<exp(1/e) both solutions for Q are real. The negative Q corresponds to tetration, decaying to the asymptotic value L in the direction of real axis; positive Q corresponds to the solution growing along the real axis. At the real axis, such a solution remains larger than unity; this does not allow to satisfy condition F(0)=1. Therefore, only one negative Q corresponds to the asymptotic behavior of tetration.

At b>exp(1/e), both options for Q are mutually complex conjugate. The real part is shown thif thick green line; one option of the imaginary part is shown with dashed line.

Possibilities for the period (or quasi-period) T=2πQ are shown in Figure 3 with dotted lines. At b>exp(1/e), only "negative" period corresponds to tetration. At b>exp(1/e), the periodicity can be achieved only asymptotically; and T is quasi-period. The real part of quasi-period is marked with black dotted line; one of two options tor the imaginary part is marked with pink dotted line.

Generally, at 1<b<exp(1/e), tetration is periodic; the period is pure imaginary.

At b=exp(1/e), tetration is not periodic, and no exponential asymptotic exist.

b>exp(1/e), tetration is quasi–periodic, the quasi-period in the upper complex half-plane is conjugate to that in the lower complex half-plane. The larger is base b, the shorter is quasi-period. As the quasi-periods are complex conjugated, the quasi-periodicity takes place away from the real axis.

Evaluation of tetration[edit]

As the asymptotics of tetration are critically dependent on the base b in the vicinity of the value b=exp(1/e), the evaluation procedure is different for the cases 1<b<exp(1/e), b=exp(1/e), and b>exp(1/e), and these should be considered separately.

Case 1<b<exp(1/e)[edit]

Template:CC-Image
Fig.4. Tetration f=tetb(x+iy) for b=2

For 1<b<exp(1/e), the period T is imaginary. The period with smallest modulus corresponds to the solution that is unity at the origin of coordinates. For b=2, the function f=tetb(z) is shown in figure 4 with levels of constant real part and levels of constant imaginary part. Levels (f)=2,3,4 and levels (f)=0,±1,±2±3,±4 aew shown with thick lines. Intermediate levels are shown with thin lines. There are branch points at (z)=2,(z)=2π|T|mm; the cut lines are (z)<2,(z)=2π|T|mm. For this value of the base, the period

T=2πln2(2)17.1431481793548471041794i.

There is a cut at x<2, y=0; although the jump at this cut reduces at the increase of x. In such a way, the function approaches its limiting value L=4 almost everywhere, although there is set of singularities at negative integer values of x<2.

The solution follows asymptotic at large values of real part of the argument, exponentially approaching the limiting value. In particular, for b=2, this maximum limiting value is in the left hand side of the figure, and to its minimum limiting value in the right hand side. For b=2, these limiting values are L=4 and L=2.

The trace of the solution along the real axis corresponds to the red dotted curve in Figure 1. Other solutions of the recursive equation expb(F(z))=F(z+1), that may grow up along the real axis, can be constructed in a similar way, but they do not satisfy the criteria formulated in the definition of tetration; in particular, F(0)=1.

Case b=exp(1/e)[edit]

Fig.5. Tetration at b=exp(1/e).

At b=exp(1/e), the limiting value L=e, and, asymptotically,

F(z)=e2e/z+𝒪(ln(z)/z2)

The function f=F(x+iy) is shown in figure 5.

Levels (f)=2,1,0,1,2,3,4 are shown with thick black lines.

Levels (f)=1,2,3,4 are shown with thick red lines.

Levels (f)=1,2,3,4 are shown with thick blue lines.

Intermediate levels are shown with thin lines.

There is a cut at x<2, y=0, but the hump of the function at the cut reduces as y reduces, id est, with increasing |z|. In such a way, everywhere, at |z|, the function approaches its limiting value L=e2.71. almost everywhere, although there is a set of singularities at negative integer values of z<1.

Behavior of this function at real values of argument is shown in Figure 1 with thin solid line. Other solutions of the recursive equation expb(F(z))=F(z+1) can be constructed in the similar way; they may grow up along the real axis, but they do not satisfy criteria formulated in the definition of tetration; in particular, F(0)=1.

Case b>exp(1/e)[edit]

(CC) Image: Dmitrii Kouznetsov
Fig.6. Tetration tetb(x+iy) at base b=2 and b=e.

At b>exp(1/e), tetration is asymptotically periodic. It decays exponentially to the fixed points L and L* in the upper and lower halfplane. This allows to express it through its values along the imaginary axis, using the Cauchi integral. [1].

For the base b=2 and b=e tetration f=tetb(z) is plotted in figure 6. Levels f=0,±1,...±16 and f=0,±1,...±16 are drawn with thick lines. The function has a logarithmic singularity at point -2 and cut at real values of the argument, smaller than -2. In the right hand side, symbols mean huge values that cannot be stored in the conventional floating point representation (logarithm, mantissa). In the upper left and lower left part of each graphic, the function approaches its asymptotic values L and L*. Function is quasi-periodic; the same fractal structure reproduces again and again at the translation of argument with quasiperiod T in the upper halfplane and T* in the lower halfplane.

There is cut at x<2, y=0. The jump of the function at this cut approaches LL* almost everywhere, although there is set of singularities at negative integer values of x<2.

Along the real axis, tetration for these values of the base is plotted also in figure 1 with thick solid and dashed lines.

Behavior along the real axis[edit]

(CC) Image: Dmitrii Kouznetsov
Derivatives of tetration at b=e.

The growth of tetration along the real axis is crucially determined by its base. The graphic of this function is shown at the top of the article for b=2,exp(1/e),2,e. For b=e, the derivatives of tetration are plotted in figure at the right.

tet is plotted with red;
tet is plotted with green;
tet is plotted with blue;
tet is plotted with pink.

Tetration is strictly growing function; its first derivative is positive. For b=e the minimum of the derivative takes place in vicinity of 0.5 and is slightly smaller than unity. At 1<b<exp(1/e), the growth is limited by the minimum of the limiting values L. Tetration approaches this limiting value exponentially. In particular, at b=2, the limiting value is 2.

At b=exp(1/e), the growth is limited by the fixed point L=e. Tetration approaches this limiting value as rational function.


The growing-up holomorphic solution of equation expb(F(z))=F(z+1) can be constructed in the similar way also at 1bexp(1/e), but at the real axis, such a solution remains larger than unity, and the condition F(0)=1 cannot be satisfied. Therefore, this solution cannot be interpreted as extension of iterative exponentiation expb(expb(...1..)) for non-integer number z of exponentiations; in this sense, such a solution is not a tetration.

Tetration tetb shows explosively-fast growth along the real axis only at values b>exp(1/e).

Tetration at the base b=2[edit]

Template:CC-Image
Tetration at the base b=2

There is hypothesis that at base b=2, the graphic of tetration y=tetb(x) is symmetric with respect to the line y=x. This line, together with the graphic, is shown in Figure at let. The asymptotics x=2 and y=2 are also shown. The graphic looks symmetric with respect to xy, but no proof of this hypothesis was suggested. Now this hypothesis is negated; the apparent symmetry is only approximation. However, for b=2, at the segment 1x0, the relation tetb(x)tetb1(x) holds with 4 decimal digits [8][9].

Tetration at base e[edit]

Holomorphic tetration on the natural base b=e is the most developed, at least up to the year 2008. In the rest of this article, it is assumed that b=e2.71828 although the majority of results allow a straightforward extension to the case of real b>exp(1/e)1.44467.

Tetration has real fixed point X0, id est, solution z of the equation z=tet(z). Its approximation

X01.85035452902718

can be found, iterating equation z=slog(z), where slog is inverse function of tetration.

Pentation[edit]

Complex map of natural pentation, u+iv=pen(x+iy) by [10]

Superfunction of tetration can be called pentation; it is solution of equations

pen(z+1)=tet(pen(z))
pen(0)=1

Expansion of tetration in vicinity of its fixed point X0 from the interval (2,1) (for real base b>1) allows to define unique (and the only "true") pentation. Other superfunctions of tetration can be obtained by the periodic modification of the argument of pentation.

For base b=e2.71, the fixed point of tetration X01.850354529. and pentation to this base approaches this value at large negative values of the real part of the argument [11][10]. Complex map of natural pentation is shown in figure at left; u+iv=pen(x+iy).

Inverse of tetration[edit]

Fig.7. slog in the complex plane.

The inverse of tetration t=slog(z)=tet1(z) can be performed using the Newton method, solving equation tet(t)=z, leading to

tet(kslog(z))=z.

The inverse function has branchpoints L and L*. For the kslog, at base b=e, shown in the figure 7, the cuts are placed horizontaly, along the lines

(z)<(L), (z)=±(L).

Due to the symmetry kslog(z*)=kslog(z)*, it is sufficient to plot only half of the complex plane.

Fig.8. Shaded region is image of the upper halfplane at the mapping with slog function.

The mapping with function kslog is shown in figure 8. For x in the shaded region, the relation

slog(tet(z))=z

takes place. The upper part of the complex plane is mapped into the upper halfplane, and the lower halfplane is mapped to the lower halfplane. The real axis is mapped into the halfline (2,). The fixed points L is mapped to imaginary infinity, following the shaded strip.

In figure 8, the images of the grid lines (z)=1,0,(L),1,2,3 and images of the grid lines (z)=1,(L),2,3,4 are shown. These curves reproduce levels (F(z))=const and (F(z))=const shown in figure 6 for b=e.

Together, the pair of functions tet and kslog allow to evaluate any iteration (including negative, fractional and even complex) of the exponential function.

Beyond the cutlines of slog[edit]

(CC) Image: Dmitrii Kouznetsov
3 options to put cutlines of the superlogarithmic function

The function slog has branchpoints, and there are many options to pit the cutlines. The cutlines, parallel to the abscias axis, considered above is one of many options. One can put the cutlines along the level (slog(z))=2. This cases simplify the plotting of the slog function, while the only tetration is available for the efficient evaluation. On the other hand, there is no simple expression for the parametrization of such a cutline, and the calculation of the position of the cutlines slows down the algorithm of evaluation of slog. In addition, there is tradition, that cutlines of the special functions are placed parallel to the real or imaginary axis. One could place the cutline from the branchpoints to the abscissa axis. In this case, the additional cutlines should go along the negative part of the real axis, which is not convenient for the applications. (For example, for the evaluation of the generalized exponential expc at non-integer c, it is important, that the real axis belongs to the range of holomorphism of slog. There are 3 other options to place the cutlines parallel to the coordinate axes, keeping condition slog(z*)=slog(z)*. There 3 options are shown in the figure.

The shaded region shows the domain

G={z:(z)>(L),|z|<|L|}

For evaluation of any of these superlogarithms, it is sufficient to have the efficient algorithm for the evaluation in this domain.

The left hand side picture corresponds to the slog, sa it is defined above. Within the strip between the cutlines, the function approaches its limiting value 2; it becomes infinite in vicinity of the branch points and varies very slow in the rest of the complex plane.

The central part of the picture represents slog with vertical cutlines, let us call this function slogv. In the left hand side of the complex halfplane, the evaluation of slog begins with exponentiation of its argument. The exponential is periodic function; therefore, in this part, slog is periodic:

slogv(z+2πim)=slogv(z)m,z:(z)<0

The third option, let us denote it slogr, is to put the cutlines in the direction of the real axis. Along the real axis, the function remains holomorphic, but there are additional branchpoints in the ranges (z)>1,1<|(z)|<2. In these regions, the function slogr show the fractal behavior.

The slog, defined at the beginning, seems to be simpler than slogv and slogr; therefore, namely slog with horizontal cutlines, parallel to the real axis, going in the direction, opposite to the real axis, is used below.

Polynomial approximation[edit]

The Taylor series for the tetration can be written in the usual form:

tet(z)=n=0cn(zz0)n

where the nth coefficient

cn=1n!tet(n)(z0)

is expressed through the n derivative of the function. The coefficients of the expansion can be calculated using the straightforward differentiation of the representation through the Cauchy integral.

Taylor expansion at zero[edit]

(CC) Image: Dmitrii Kouznetsov
Fig.N. Approximation of tetration with polynomial of 25th power

For z0=0, the calculation gives the following values

c0 = 1
c1 ≈ 1.091767351258322138
c2 ≈ 0.271483212901696469
c3 ≈ 0.212453248176258214
c4 ≈ 0.069540376139988952
c5 ≈ 0.044291952090474256
c6 ≈ 0.014736742096390039
c7 ≈ 0.008668781817225539
c8 ≈ 0.002796479398385586
c9 ≈ 0.001610631290584341
c10≈ 0.000489927231484419
c11≈ 0.000288181071154065
c12≈ 0.000080094612538551
c13≈ 0.000050291141793809
c14≈ 0.000012183790344901
c15≈ 0.000008665533667382
c16≈ 0.000001687782319318
c17≈ 0.000001493253248573
c18≈ 0.000000198760764204
c19≈ 0.000000260867356004
c20≈ 0.000000014709954143
c21≈ 0.000000046834497327
c22≈-0.000000001549241666
c23≈ 0.000000008741510781
c24≈-0.000000001125787310
c25≈ 0.000000001707959267

The truncated Taylor series gives the polynomial approximation. In the upper right hand side of the Figure N, the polynomial

f=n=025cnzn

is shown in the complex z plane.

Levels (f)=2,1,0,1,2,3,4 are shown with thick black curves.
Levels (f)=1.8,1.6,1.4,1.2,0.8,0.6,0.4,0.2 are shown with thin red curves.
Levels (f)=0.2,0.4,0.6,0.8,1.2,1.4,1.6,1.8 are shown with thin thin blue curves.
Levels (f)=2,1 are shown with thick red curves.
Levels (f)=1,2 are shown with thick blue curves.
Levels (f)=±π,±3π are shown with thick pink curves.
Levels (f)=±0.2,±0.4,±0.6,±0.8,±1.2,±1.4,±1.6,±1.8 are shown with thin green curves.

In the upper left corner of figure N, the same is shown for function log(f)

At the bottom left, the overlap of the upper two images is shown.

At the bottom right, lines of constant modulus and constant phase of holomorphic tetration in the same range.

The good approximation of tetration takes place in the range |z| of order of unity or smaller; the radius of convergence of the series is 2.

Expansion at 3i[edit]

Taylor expansion of tetration developed at 3i, truncated at 30th power, plotted in the complex plane.

Coefficients of the expansion

tet(z)=n=0an(z3i2)n

can be evaluated in the similar way:

a00.3709065890322851+1.3368216707889140i
a10.0366009653759846+0.1392221538995050i
a20.1688843184064154+0.0971853361962927i
a30.12681315048680870.1183162876702863i
a40.04235809310323930.1052093008832072i
a50.05848306393563180.0081022452449608i
a60.0234003166529485+0.0180777701182038i
a70.0034426098470138+0.0181510375563591i
a80.0080369581444167+0.0091742846703500i
a90.00704695528168770.0009395850672747i
a100.00184617963095310.0032234258318168i
a110.00054064885443100.0018967206101561i
a120.00102243648088810.0005596865717924i
a130.0006471439639805+0.0002598066193583i
a140.0001044445559337+0.0003719947259883i
a150.0001117853540434+0.0001678668755219i
a160.0001063015871081+0.0000207220003313i
a170.00005078098819110.0000357591300574i
a180.00000314742998690.0000352318593759i
a190.00001347661344130.0000133303413745i
a200.0000098023908240+0.0000004760718415i
a210.0000035549347545+0.0000038981621220i
a220.0000002155265265+0.0000029627341324i
a230.0000013167390363+0.0000009738135453i
a240.00000083401960810.0000001866385871i
a250.00000022869610980.0000003749771677i
a260.00000005372584610.0000002306013659i
a270.00000011406656650.0000000656951029i
a280.0000000666359546+0.0000000232663057i
a290.0000000139678685+0.0000000331511830i
a300.0000000068489056+0.0000000171304198i

The plot of approximation of tetration with the resulting polynomial of 30th power is shown in figure. This approximation can be used for plotting of camera-ready pictures of tetration, using it and its conjugation at (z)0.5. With 50 terms, at |z3|<2, such approximation returns 14 significant figures.

Asymptotic expansion at large values of the imaginary part of the argument[edit]

(CC) Image: Dmitrii Kouznetsov
Fig.As. Deviation of tetration from its asymptotic expansion.

Here only the case of base b=e is considered; although the generalization to the case b>e is straightforward. In this section, the behavior of tetration tet(z) is considered for moderate values of (z) and large values of (z)

At b=e, in the upper halfplane, tetrations approach the fixed point L0.3+1.3i of the logarithm. This approach is exponential. Using the exponential

ε=ε(z)=exp(Lz+R)

as a small parameter, for some complex constant R, the tetration can be estimated as follows:

tet(z)=L+ε+a2ε2+a3ε3+𝒪(ε4)

Substitution of this expression into the equation tet(z+1)=exp(tet(z)) gives
a2=1/2L10.1513140.2967488i, a3=a2+1/6L210.36976+0.98730i
Value R1.0779614375260.946540963949i can be found fitting the tetration tet(z) with function L+ϵ+a2ϵ2+a2ϵ3 at large values of (z). Then, the expansion can be written in the form

tet(z)=n=0Nanεn+(O)(εN+1)

assuming that a0=L and a1=1. At given N, such a representation indicates the possible approximations of tetration. The deviations of tetration from these approximations are shown in figure Fig.As.

The four plots in fig.As correspond to the four asymptotic approximations. The deviations

f=tet(z)L,
f=tet(z)(L+ε(z)),
f=tet(z)(L+ε+a2ε2),
f=tet(z)(L+ε+a2ε2+a3ε3)

are shown in the complex plane with lines of constant phase and constant modulus.

Levels arg(f)=2,1 are shown with thick red lines.
Level arg(f)=0 is shown with thick black lines.
Levels arg(f)=1,2 are shown with thick blue lines.
Levels arg(f)=±π are shown with scratched lines. (these lines reveal the step of sampling used by the plotter).
Levels |f|=exp(0.8),exp(0.6),exp(0.4),exp(0.2) are shown with thin red lines.
Levels |f|=exp(0.2),exp(0.4),exp(0.6),exp(0.8) are shown with thin blue lines.
Levels |f|=exp(3),exp(2),exp(1),exp(0),exp(1),exp(2),exp(3),exp(4),exp(5),exp(5),exp(7),exp(8) are shown with thin thick black lines.
Level |f|=exp(10) is shown with thick red line.
Levels |f|=exp(12),exp(14),exp(16),exp(18) are shown with thick black lines.
Level |f|=exp(20) is shown with thick red line.
Levels |f|=exp(22),exp(24),exp(26),exp(28) are shown with thick black lines.
Level |f|=exp(30) is shown with thick green line.
Level |f|=exp(31) is shown with thick black line.

The plotter tried to draw also

Level |f|=exp(32) with thick black line and
Level |f|=exp(33) with thin dark green line, which are seen a the upper left hand side corners of the two last pictures, but the precision of evaluation of tetration is not sufficient to plot the smooth lines; for the same reason, the curve for
|f|=exp(31) in the last picture, in the upper right band side looks a little bit irreguler; also, the pattenn in the upper left corner of the last two pictures looks chaotic; the plotter cannot distinguish the function from its asymptotic approximation.

The figure indicates that, at (z)>4, (z)<4(z)25, the asymptotic approximation

tet(z)L+ε+a2ε2+a3ε3

gives at least 14 correct significant figures. At large values of the imaginary part, this approximation is more precise than the evaluation of tetration through the contour integral.

Approximation of tetration with elementary functions[edit]

(CC) Image: Dmitrii Kouznetsov
f(z)=log(z+2)+n=0100cnzn in the complex z-plane.

Due to recurrent relation tet(z)=exp(tet(x+1)), it is sufficient to approximate tetration in any vertical strip of unit with in the complex plane. Some of such approximations are suggested in [1]. In principle, the numerical approximation of tetration with implementation of the Cauchi integral with finite sums [1] also should be considered as approximation with elementary function. However for the practical evaluation of tetration, shorter expressions are more suitable. One of such approximation comes from the Taylor expansion of function tet(z)log(z+2). The subtraction of logarithm remove the closest singularity that limits the radius of convergence of the Taylor series, and makes precise the approximation with finite sum. One of such approximation with one logarithm and polynomial of 100th power

f(z)=log(z+2)+n=0100cn(z2)n

is shown at the figure in the complex z-plane. In vicinity of the origin of coordinates, say, |z|<1, the most of terms are negligibly small, and the shortened sum still approximates the tetration. The first coefficients in this expansion are

c0=0.30685281944005469058
c1=1.18353470251664338875
c2=1.58593285160678321155
c3=1.36629265207672068172
c4=1.36264601823980036066
c5=1.21734246689515424045
c6=1.10981816083559525765
c7=0.96674692974769849130
c8=0.84089872598668435888
c9=0.71353210966804747617
c10=0.60168548504001373445

More coefficients can be extracted from the generator of the figure. While |z|2, the approximation with 101 terms returns at least 14 correct significant figures.

Approximation of slog[edit]

Function slog, which is inverse of tetration, allows the approximation with elementary functions.

Taylor expansion[edit]

(CC) Image: Dmitrii Kouznetsov
Approximation of slog with polynomial of 16th power from the Taylor expansion at unity.

The Taylor series for the tetration can be inverted, gaining the expansion of the superlogarithm:

slog(z)=n=1cn(z1)n.

Approximations for the first 16 coefficients:

c10.91594605649953
c20.20861842957759
c30.05450400630209
c40.07134941925273
c50.02004387374438
c60.01101258023037
c70.01207268318645
c80.00272922880760
c90.00269905319156
c100.00243941500632
c110.00036220360858
c120.00070125921262
c130.00052782155380
c140.00002987943551
c150.00018614540434
c160.00011722843042

The partial sum with 16 terms (from zero to 16) is plotted in the figure in the complex z plane. Lines of constant real part and constant imaginary part are drawn.

The radius of convergence of this series is determined by the distance to the closest singularity; the representation of slog(z) with the Taylor series is valid for

|z1|<|1L|

Obviously, it fails at z=L. For this case, the asymptotic expansion can be used.

Expansion at fixed point L of logarithm[edit]

(CC) Image: Dmitrii Kouznetsov
Fitting of slog with the expansion around L.

Superlogarithm can be approximated with expansion [12]

slog(z)=1L(log(zL)+m,nrm,n(zL)m+2πin/L),

where L is fixed point of logarithm. This expansion indicates the ways to construct the asymptotic approximations of slog. The coefficients can be expressed from the asymptotical analysis of equation slog(exp(z))=slog(z)+1. Also, they can be expressed from the asymptotical estimate of tetration at large values of the imaginary part of the argument. The evaluation of first coefficients gives

r0,01.0779614375+0.9465409639i
r1,00.1513148972+0.2967488367i
r2,00.0607692016+0.0359770148i
r3,00.00793788750.0176412865i
r4,00.00510875460.0000718839i

These coefficients allow to approximate slog in vicinity of the fixed point of logarithm with function

f=1L(log(zL)+m=04rm,0(zL)m).

In the figure this f is shown in the complex z-plane.

Levels (f)=0,±1,±2 are shown with thick black lines.
Levels (f)=1.9,..0.1 are shown with thin red lines.
Levels (f)=1.9,..1.9 are shown with thin dark green lines.
Levels (f)=0 is shown with thick green line.

(Deviation of this line from the real axis indicates the error of the approximation.)

Level (f)=1 is shown with thick red line
Levels (f)=1,2,3 are shown with thin dark blue lines.

For comparison, dashed lines show the precise evaluation for some of the levels above for the robust implementation of the slog function as inverse of tetration. While |zL|<1, the deviation of these dashed lines from the levels for function f is not seen even at the strong zooming-in of the central part of the figure.

Approximation of slog with elementary functions[edit]

(CC) Image: Dmitrii Kouznetsov
Approximation of slog with function fslog.
(CC) Image: Dmitrii Kouznetsov
Numerical test of approximation of slog with function fslog.

The precision of approximation of slog (with fixed precision of the arithmetics used for the tvaluation) can be extended, takung unto account the singularitues of slog at the fixed points. From the asumptotical representation above, one can guess the robust representation for slog:

slog(z)=log(zL)L+log(zL*)L*+n=0un(z1)n

The coefficients of this expansion are real. The first coefficients:

u01.419225215505
u10.026066290298
u20.001733047818
u30.000019521307
u40.000063070064
u50.000025678960
u60.000005590100
u70.000000072797
u80.000000651489
u90.000000276981
u100.000000031118
u110.000000029409
u120.000000018969

This representation allows construction of approximations, truncating the series. One of such approximations

f=fslog(z)=log(zL)L+log(zL*)L*+n=050un(z1)n

is shown in figure in the complex z plane. Lines of constant (f) and those of constant (f) are plotted.

The range of approximation of slog with this function is wider than that with the Taylor expansion at unity. The extended range of approximation allows its validation with the numerical test of identities

slog(z)=slog(exp(z))1
slog(z)=slog(log(z))+1

The residuals

f=fslog(z)fslog(exp(z))+1 and
f=fslog(z)fslog(log(z))1

are shown in the figure with levels |f|=const. In the voided regions in vicinity of z=0 and z=1, the residual is at the level of 1014. (It is difficult to make the residual smaller, using the arithmetics with double complex variables.) This test indicates, that at |z1||L|, the approximation of slog with two the logarithms and the polynomial of 50th power gives at least 9 correct significant figures.

Iterated exponential and exp[edit]

(CC) Image: Dmitrii Kouznetsov
Fig.9. expc(z) in the complex z plane for various c.

Pre-historic approach to the iterated exponential[edit]

Especially interesting is the case of iteration of natural exponential, id est, b=e. Existence of the fractional iteration, and, in particular, existence of operation exp=exp1/2 was demonstrated in 1950 by H.Kneser. [12]. However, that time, there was no computer facility for the evaluation of such an exotic function F that F(F(z))=exp(z); perhaps, just absence of an apropriate plotter did not allow Kneser to plot the distribution of fractal exponential function expc(z) in the complex z plane for various values of c, shown in Fig.9.

(CC) Image: Dmitrii Kouznetsov
Fig.10. expc(x) versus x

The Implementation through the tetration[edit]

Holomorphic tetration allows to extend the iterated exponential expbc

expb0(z)=z
expb1(z)=expb(z)
expb2(z)=expb(expb(z))
expbc+1(z)=expb(expbc(z))

For non-integer values of c. It can be defined as

expbc(z)=tetb(c+tetb1(z))

If in the notation expbc the superscript is omitted, it is assumed to be unity; for example expb1=expb. If the subscript is omitted, it is assumed to be e, id est, expc=expec

Iterated exponential in the complex plane[edit]

Function f=expc(z) is shown in figure 9 with levels of constant real part and levels of constant imaginary part. Levels (f)=3,2,1,0,1,2,3,4,5,6,7,8,9 and (f)=3,..14 are drown with thick lines. Red corresponds to a negative value of the real or the imaginaryt part, black corresponds to zero, and blue corresponds to the positeive values. Levels (f)=0.2,0.4,0.6,0.8 are shown with thin red lines. Levels (f)=0.2,0.4,0.6,0.8 are shown with thin green lines. Levels (f)=(L) and Levels (f)=(L) are marked with thick green lines, where L0.31813150520476413+1.3372357014306895i is fixed point of logarithm. At non-integer values of c, L and L* are branch points of function expc; in figure, the cut is placed parallel to the real axis. At c<0 there is an additional cut which goes along the negative part of the real axis. In the figure, the cuts are marked with pink lines.

Iterated exponential of a real argument[edit]

For real values of the argument, function y=expc(x) is ploted in figure 10 versus x for values c=0,±0.1,±0.5,±0.9,±1,±2.
in programming languages, inverse function of exp is called log.

For logarithm on base e, notation ln is also used. In particular, exp1(x)=ln(x), exp2(x)=ln(ln(x)) and so on.

At least for the real and big enough x, the relation expu(expv(x))=expu+v(x) holds, which is qute analogous of relations ux+vx=(u+v)x and xuxv=xu+v. However, at negative u or negative v, value x should be big enough, that expu(x) and expv(x) and expu+v(x) are defined, see figure 10. For example, at min(u,v,u+v)=2, we need x>1. In particular, at u=1, v=1, we have exp1(exp1(x))=exp(ln(x))=x.

Application of iterated exponential[edit]

The iterated exponential, that can be implemented with holomorphic tetration, may have various applications. In particular, The expbc(x) at 0<c<1 could describe a process that grows faster than any polynomial, but slower than any exponential. In such a way, the iterated exponential, at the proper implementation, should greatly extend the abilities of fast and precise fitting of functions. This is just analogy of function f(x)=xa which, at fractal values of a, may be good for description of a function that grows faster than any linear function but slower than any quadratic function.

Similar functions[edit]

Withdrawal of some of requirements from the definition of tetration allows the huge variety of similar functions.

Entire solutions of F(z+1)=exp(F(z))[edit]

Withdrawal of the requirement F(z*)=F(z)* and F(0)=1 allows the solution by Kneser [12], which is entire and also could be used to build up various powers of the exponential; in particular, exp. Such entire function is shown in upper part of figure 1c in [1], in order to reveal the asymptotic behavior of holomotphic tetration.

Withdrawal of condition F(0)=1 allows to construct solutions, similar to the growing tetration, for base 1<bexp(1/e). Although such solutions cannot be interpreted as generalization of exponential iterated z times, they can be useful for generalization of exponential function.

Non-holomorphic modification of tetration[edit]

(CC) Image: Dmitrii Kouznetsov
Fig.11. Almost identical function f(z)=z+109sin(2πz) in the complex z=x+iy plane.
(CC) Image: Dmitrii Kouznetsov
Fig.12. Motified tetration at the complex plane.
(CC) Image: Dmitrii Kouznetsov
Fig.13. Zoom in of fig.12

Withdrawal of requirement of holomorphicity from the definition of tetration allows functions, which look like the tetration, at least along the real axis. Even the reduction of the range of holomorphism in the requirement allows to consider tetration with modified argument. The modified tetration can be defined as

tem(z)=tet(J(z))=tet(z+h(z)) ,

where J(z)=z+h(z), and h is a 1-periodic function. The simple example of such function is

h(z)=109sin(2πz)

In this case, along the real axis, the function J is almost identical to its argument; and values of the modified tetration are close to values of tetration. Being plotted at figure 1 or in figure 10, the deviation of such function J from the identity is small, and the deviation of the modified tetration from tetration is also small. If the figures are printed in the real scale, then the deviation of the curves would be of order of atomic size.

However the difference becomes seen at the complex values of the argument. In figure 11, function J(z)=z+h(z) is plotted in the complex z=x+iy plane. Levels of constant real part and those of constant imaginary part are drawn. In vicinity of the real axis, these lines almost coincide with the gridline; the grid is drawn with step unity and extended one step to the right and one step to the left from the graphic. In order to show that it behaves as it if would be a continuation of the plot. At |(z)|3, the deviation from the identical function becomes visible, and at |(z)|>3, the J(z) has many points with real values, including those with various negative integer values. The tetration has cut at negative values of z<2 and singularities there. Therefore, the cuts of the modified tetration are determined by the lines J(z)2, and modified tetration unavoidable has singularities in points z such that J(z){n:n<1}. These singularities are determined by the function h and do not depend on the base b of tetration. In figure 11, the lines J(z)<2 are seen not only along the real axis, but also at the top and at the bottom of the figure. In such a way, figure 11 shows the cutlines of the modified tetration. One has no need to evaluate tetration in order to see the margin of the change of holomorphism of the modified tetration.

In figure 12, the modified tetration is plotted in the complex z-plane. The additional cuts are seen in the upper and lower parts of the figure 12. Only within the strip along the real axis, the function is holomorphic. While the amplitude of sinusoidal is of order of 109, the strip of holomorphism is wider than unity, although this width slightly reduces along the real axis.

In order to see the behavior of the modified tetration in vicinity of the additional singularities, in fig.13, the zooming-in of the part of figure 12 is shown. The zoom has improved resolution, so, in its turn, it can be zoomed in to the size of the screen of a computer to see the details. In each cell of the grid, the small and deformed image of the central part of the fig.12 appears.

One has no need to evaluate tetration in order to reveal its singularities outside the real axis. All the solutions z of equation z+h(z)=n for integer n<1 are singularities (branchpoints) of the modified tetration.

Let ={n:n<1}.

The following theorem is suggested: For any entire 1-periodic function h such that h(0)=0, h is not a constant, h(z*)=h(z)*z, there exist z:|(z)|<1,z+h(z). sequence Although this theorem is not yet proved, the intents to construct at least one example of function, that would contradict it, were not successful. This theorem is somehow independent from the theory of tetration, but it indicates, that any modified tetration cannot be holomorphic in the range {zC:(z)>2}.

According to the theorem above, the modified tetration does not satisfy the condition of quasi-periodicity, and does not satisfy the criterion of holomorphism in the definition of tetration. The sequence of cutlines for the specific example of modified tetration is seen in figure 13; the modified tetration is not even continuous. An addition to function h some highest sinusoidals brings the discontinuities even closer to the real axis. This indicates, that if in at least one point at the real axis between 1 and 1, some solution F of equations F(z+1)=exp(F(z)), F(0)=1 differs from tetration tet for at least 109, then this solution is not holomorphic in the range {z:|(z)|<1,|(z)|<4}.

Even small deformation of tetration tet breaks its continuity. Similar reasons in favor of uniqueness tetration are suggested also in [1]. There is only one tetration, that satisfies requirements of the definition, although the rigorous mathematical proof of the uniqueness is still under development.


References[edit]

  1. 1.0 1.1 1.2 1.3 1.4 1.5 D.Kouznetsov. (2009). "Solutions of F(z+1)=exp(F(z)) in the complex zplane.". Mathematics of Computation, 78: 1647-1670. DOI:10.1090/S0025-5718-09-02188-7. Research Blogging. Cite error: Invalid <ref> tag; name "k" defined multiple times with different content
  2. 2.0 2.1 D.Kouznetsov. Ackermann functions of complex argument. Preprint of the Institute for Laser Science, UEC, 2008. http://www.ils.uec.ac.jp/~dima/PAPERS/2008ackermann.pdf Cite error: Invalid <ref> tag; name "k2" defined multiple times with different content
  3. R.L.Goodstein (1947). "Transfinite ordinals in recursive number theory". Journal of Symbolic Logic 12.
  4. 4.0 4.1 P.Walker (1991). "Infinitely differentiable generalized logarithmic and exponential functions". Mathematics of Computation 196: 723-733. Cite error: Invalid <ref> tag; name "w" defined multiple times with different content
  5. M.H.Hooshmand. (2006). "Ultra power and ultra exponential functions". Integral Transforms and Special Functions 17 (8): 549-558.
  6. N.Bromer. Superexponentiation. Mathematics Magazine, 60 No. 3 (1987), 169-174
  7. W.Ackermann. ”Zum Hilbertschen Aufbau der reellen Zahlen”. Mathematische Annalen 99(1928), 118-133.
  8. D.Kouznetsov, H.Trappmann. Portrait of the four regular super-exponentials to base sqrt(2). Mathematics of Computation, 2010, v.79, p.1727-1756. http://www.ams.org/journals/mcom/2010-79-271/S0025-5718-10-02342-2/home.html http://mizugadro.mydns.jp/PAPERS/2010q2.pdf
  9. https://www.morebooks.de/store/ru/book/Суперфункции/isbn/978-3-659-56202-0 http://www.ils.uec.ac.jp/~dima/BOOK/202.pdf http://mizugadro.mydns.jp/BOOK/202.pdf Д.Кузнецов. Суперфункции. Lambert Academic Press, 2014. (In Russian, 328 pages.)
  10. 10.0 10.1 https://www.morebooks.de/store/ru/book/Суперфункции/isbn/978-3-659-56202-0 http://mizugadro.mydns.jp/BOOK/202.pdf Д.Кузнецов. Суперфункции. Lambert Academic Publishing, 2014. (In Russian)
  11. D.Kouznetsov. Holomorphic ackermanns. http://mizugadro.mydns.jp/PAPERS/2014acker.pdf under consideration
  12. 12.0 12.1 12.2 H.Kneser. “Reelle analytische L¨osungen der Gleichung φ(φ(x))=ex und verwandter Funktionalgleichungen”. Journal fur die reine und angewandte Mathematik, 187 (1950), 56-67. Cite error: Invalid <ref> tag; name "kneser" defined multiple times with different content

Licensed under CC BY-SA 3.0 | Source: https://citizendium.org/wiki/Tetration
52 views | Status: cached on November 03 2025 17:14:44
↧ Download this article as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF