Table of Contents Categories
  Encyclosphere.org ENCYCLOREADER
  supported by EncyclosphereKSF

Using SVG with HTML5 tutorial

From EduTechWiki - Reading time: 15 min

Introduction[edit | edit source]

According to Wikipedia (retrieved April 1 2012), “Scalable Vector Graphics (SVG) is a family of specifications of an XML-based file format for two-dimensional vector graphics, both static and dynamic (i.e. interactive or animated). The SVG specification is an open standard that has been under development by the World Wide Web Consortium (W3C) since 1999. SVG images and their behaviors are defined in XML text files. This means that they can be searched, indexed, scripted and, if required, compressed. As XML files, SVG images can be created and edited with any text editor, but it is often more convenient to create them with drawing programs such as Inkscape. All major modern web browsers have at least some degree of support and render SVG markup directly, including Mozilla Firefox, Internet Explorer 9, Google Chrome, Opera and Safari. Earlier versions of Microsoft Internet Explorer (IE) do not support SVG natively.”.

SVG is part of the HTML 5 draft specification, i.e. SVG tags are part of the language and can be inline. We have seen it working since Chrome 9 and 10, Firefox 4, Opera 11 and Internet Explorer 9 (feb 2011). Support of SVG is still not complete, but rapidly improving. All major browser brands (except IE9) now offer very good support - Daniel K. Schneider 19:47, 1 April 2012 (CEST)

If you want to know whether your browser can handle SVG and HTML5, look at this See the When can I use Inline SVG in HTML5? compatibility table at caniuse.com.

Further reading:

See also:

Learning and reusing SVG[edit | edit source]

Learning SVG[edit | edit source]

The SVG links article includes a number of good links. Otherwise, start from the Static SVG tutorial.

If you want to dive in, use:

Respect the syntax of the SVG fragment:

Minimal example (not recommended): 

<svg xmlns="http://www.w3.org/2000/svg">
    <circle id="greencircle" cx="30" cy="30" r="30" fill="green" />
</svg>

Unfinished example that defines a SVG canevas size. By default width and height are pixels. You also could use cm's, mm's etc. 

<svg height="200" with="600" xmlns="http://www.w3.org/2000/svg">
      <!-- SVG tags go in here, between a few lines and several hundreds .... -->
</svg>

Unfinished example enabling links (needed for animations/interactive pages!) 

<svg height="6cm" width="10cm"> 
   xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" >
   <!-- SVG tags go in here, between a few lines and several hundreds .... -->
</svg>

If you want to draw a border, use standard HTML CSS properties, e.g. like this: 

<svg style="border-style:solid;border-width:1px;" id="circle" height="60" width="120" 
     xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" >
     <!-- SVG tags go in here, between a few lines and several hundred .... -->
  </svg>
</svg>

Cleaning up SVG[edit | edit source]

... is difficult. You may try to import a file into an SVG editor and save again. So far, no editor can handle HTML5 with embedded SVG.

If your SVG file doesn't display because of syntax errors, try the W3C validation service. It will tell you what is wrong in which lines:

  • http://validator.w3.org/
  • You also may submit an HTML5 file with embedded SVG. Make sure to include the right doctype definition on top, ie. <!doctype html>

Coping with Inkscape drawings

Using drawings made with Inkscape very often require extra work since fairly weird coordinates may have been used. Chapter 23. SVG and the Web chapter of the official manual provides some tips. In particular, read Inkscape for the Web. The most important tip is to Save as Optimize SVG. This operation may set a viewBox if none is present and will set the width and height to 100%. This allows to display the full picture even if you make it small.

Suggested workflow (adapt to your needs) for making a typical Inkscape document web ready:

  1. Fit the document size to the picture size: Menu File->Document Properties. In the Custom size panel, open Resize page to content, then click Resize page to drawing or selection.
  2. Remove unused DEF's: File->Vacuum Defs.
  3. Optimize SVG': File -> Save as... -> Optimized SVG. Tick "Enable viewboxing in the save dialog. This operation will do several things, in particular, insert correct viewBox, width and height attributes.
  4. Remove non-standard SVG/Inkscape XML: File -> Save as... -> plain SVG (Since this operation will remove layers and other Inkscape specific information, keep a copy of the old file if necessary). As of Jan 2014, this can trigger a display error as shown in Using Inkscape for web animation. Reopen the saved file and the blackness may be gone ....

Again, consider keeping a copy of the original drawing. This procedure mail fail, in particular when drawings were made with non standard SVG ! You also can try to permute order, i.e. save as plain SVG first before you optimize.

Openclipart.org drawings

Most of these drawings were probably made with Inkscape and "posted as is" and you may have to clean up a bit as explained above. However, most drawings will work just fine. In addition, some SVG drawings at http://openclipart.org import just fine, e.g. the coconut tree do not include proprietary extensions. Notice that these are not illegal, the web browser just can and will ignore these. 

<?xml version="1.0"?>
  <svg xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
       xmlns="http://www.w3.org/2000/svg"
       xmlns:cc="http://creativecommons.org/ns#"
       xmlns:dc="http://purl.org/dc/elements/1.1/" 
       xmlns:svg="http://www.w3.org/2000/svg" id="svg2" 
       viewBox="0 0 744.09 1052.4" version="1.1">
</svg>

This file doesn't include any proprietary Inkscape extensions. It just includes some extra vocabularies that is used to include various meta information (description, copyright, etc.). Below a file that shows both the original and a cleanup version. There isn't much difference, since we didn't remove extra space around the drawing, it appears a bit smaller.

Have a look:

Below is another example:

How can I include SVG in HTML5[edit | edit source]

There are several ways of including SVG in HTML5. So-called inlining is most often preferred. However, inlining complex graphics makes hand-coding HTML a pain since the file can grow quite a lot.

In this chapter we just will show how to embed SVG images that are the right size. Basically, any sort of "inclusion" mechanism will work:

  • Copy/paste SVG code within HTML code (inlining)
  • Using the HTML img tag
  • Using the HTML object tag
  • Using the HTML iframe tag
  • Using CSS (background images)
  • Including SVG within SVG using the image tag.

Further below we shall explain how to adapt the size of embedded SVG images.

Inlining SVG in HTML 5[edit | edit source]

Do not forget the namespace declaration(s) in the top-level svg element. At least: xmlns="http://www.w3.org/2000/svg"

Live example: 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
  </head>

  <body>
    <h1>HTML5 SVG Demo</h1>

A nice green circle:
    <svg id="circle" height="200" xmlns="http://www.w3.org/2000/svg">
      <circle id="greencircle" cx="30" cy="30" r="30" fill="green" />
    </svg>

    <hr>
    <address>Created by DKS. This is free code</address>
  </body>
</html>

Live example of an animated SVG:

Notice:

  • SVG also can import SVG through using its "images" tag. However, this is only supposed to work with static SVG. This methods is introduced in the next chapter

Embeding SVG in HTML 5 with the img tag[edit | edit source]

This only works with static SVG. Use the object element or the SVG image element if your SVG includes animations and/or interactive elements.

Live example:

Below are the most important elements of this example: 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" />
  </head>

  <body>
    <h1>HTML5 SVG Demo (embed with img src)</h1>

   <p> A nice green circle that was embeded using the img element:
   <img src="green-circle.svg" height="64" alt="Nice green circle"/>
</p>

Embeding SVG in HTML 5 with the object tag[edit | edit source]

Live example:

Below are the most important elements of this example: 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" />
  </head>

  <body>
    <h1>HTML5 SVG Demo (embed with object)</h1>

<p> A nice green circle that was embeded using the HTML "object" tag:
<object type="image/svg+xml" data="green-circle.svg" 
	width="64" height="64" border="1"></object>
</p>
</body>
</html>

Embeding SVG in HTML 5 with the iframe tag[edit | edit source]

Live example:

Below are the most important elements of this example: 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" />
  </head>

  <body>
    <h1>HTML5 SVG Demo (embed with iframe)</h1>

<p> A nice green circle that was embeded using the HTML "iframe" tag:
<iframe src="green-circle.svg" 
	width="64" height="64" style="border:1;"></iframe>
</p>
<p>
Tips:
<iframe src="green-circle.svg" style="float:left;margin-right:1cm;" 
	width="64" height="40" style="border:1;"></iframe>
</p>
</body>
</html>

Using SVG as background image in HTML 5[edit | edit source]

Below are the most important elements of this example: Live example: 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" />
    <style type="text/CSS">
      body {
      background-image: none, url('green-circle.svg');
      background-position: 50% 50%;
      background-repeat: no-repeat;
      }
    </style>
  </head>

  <body>
    <h1>HTML5 SVG Demo (embed with CSS background)</h1>

<p> A nice green circle that was embeded using CSS Background.
</p>
<p>Tips:</p>
<ul>
<li>SVG included as CSS can't be scripted and positioning is hard. Therefore only use this method for background illustrations.</li>
</ul>
</body>
</html>

Including SVG through the SVG image element[edit | edit source]

Make sure that the included SVG defines its size in terms of percentages or that you set a viewBox. 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" />
  </head>
  <body>
    <h1>HTML5 SVG Demo - embed svg file with SVG image</h1>

<p> A huge red circle that was embeded using the svg "image" tag:</p>
<svg id="circle" height="60" width="60" 
     xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" >
  <image x="0" y="0" height="60" width="60"  xlink:href="huge-red-circle.svg" />
</svg>
</body>

Adapting the size and position of an SVG graphic[edit | edit source]

There exist various way of doing this. Our preferred method for static SVG images is to fix the original SVG graphic with a viewbox and size attributes and then import with the HTML img tag. The original SVG should look like this, i.e. include a viewBox that uses the original width and size of the drawing (to be adjusted to your drawing of course), and width and height set to 100%.

Fixing the original SVG code (see below how to do this with Inkscape) 

<svg
   xmlns="http://www.w3.org/2000/svg"
   version="1.1"
   width="100%"
   height="100%"
   viewBox="0 0 684 648">

You then can simply set a height in your HTML code, e.g. 

<img src="coconut.svg" height="100" alt="Nice coconut tree"/>

Life example:

  • Our second preferred method is to import the SVG graphic with its original size and then wrap it inside a scale transform as explained in more detail further down. Another method that also works very well is to fix the original SVG drawing as explained in the section about Inkscape and then just use the simple HTML image element.
<svg id="sir" height="116" width="106"
xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<g transform="scale(0.1)">
  <image x="0" y="0" height="1140" width="1040"  xlink:href="like_a_sir_original.svg"/>
</g>
</svg>

Using the SVG transform attribute to change the size of a graphic[edit | edit source]

For starters, we suggest editing the SVG file and adding the following "transformation" code:

Right after the opening svg tag add this: 

  <g transform="scale(0.1)">

Right before the closing svg tag add this: 

  </g>

You can use this method within your SVG graphic in order to adapt the size of various parts. Just wrap them inside a g transform="scale(...)".

Success rate: This method is guaranteed to work since it relies on basic SVG technology that is now over 10 years old. However, this is not the most elegant solution since it requires editing the SVG file. See the next solution.

Simple live example:

The simple SVG file we are going to import in the following examples is huge-red-circle.svg. It looks like this: 

<?xml version="1.0"?>
<svg height="600" width="600" xmlns="http://www.w3.org/2000/svg">
  <circle cx="50%" cy="50%" r="50%" fill="red" />
</svg>

Using the SVG image tag to import and adapt an SVG graphic[edit | edit source]

The next methods are fairly elegant, easy to understand and should work in all browsers. There are three variants. For now, I suggest to use variant B - DKS.

The simple solution[edit | edit source]

Let's recall how to use the SVG image tag: 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" />
  </head>
  <body>
    <h1>HTML5 SVG Demo - embed svg file with SVG image</h1>

<p> A huge red circle that was embeded using the svg "image" tag:</p>
<svg id="circle" height="60" width="60" 
     xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" >
  <image x="0" y="0" height="60" width="60"  xlink:href="huge-red-circle.svg" />
</svg>
</body>

All you typically have to do is:

  • Figure out the proportions of the original SVG (look at the svg root element of the SVG file)
  • Define the height and width of the image with respect to your scaling needs.

In our example, the imported graphic's dimensions were 600 x 600 px. In order to get a circle 10 times smaller, we just dived x/10 and y/10.

  • If you can't see the picture, import the picture in its original size and set the canvevas size to the same dimensions. E.g. if the original canevas is 1000x400:
<svg id="circle" height="1000.7" width="400" 
     xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" >
  <image x="0" y="0" height="1000.7" width="400"  xlink:href="huge-red-circle.svg" />
</svg>

Now that you know that the picture and your code is ok, you may try to understand why you may not see a picture. Indeed, this simple method is not guaranteed to work with every SVG file. In particular it will not when the imported image is "badly" positioned. See the next solution, using a scale transform of the imported SVG, if don't want to learn how to fix that kind of problem in the imported SVG code. Let's illustrate this with an example. The like a Sir picture is positioned in negative y space as you can see in the following screenshot and code excerpt:

SVG picture in negative space
<g inkscape:label="Ebene 1" inkscape:groupmode="layer" id="layer1" transform="translate(445.66942,-924.04028)">

Solutions:

  • Open the SVG file with Inkscape and fix it. This way you also could get rid of all the extension tags (save as "plain SVG"). However, this may not be easy. The graphic is likely to be in a wrong position, because the author created paths with SVG path data that do not fit the "usual" x=0/y=0 coordinate system. Something one never should do ....
  • Use one of the methods below. That is: import the picutre with its original size, then scale it either with a scale transform (easier) or by adjusting the ViewBox.

Of course, you can move pictures The following shows how to reposition a "normal" image. 

<svg id="circle" height="62" width="62" 
     xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" >
  <image x="1" y="1" height="60" width="60"  xlink:href="huge-red-circle.svg" />
</svg>

Import the graphic with its original size and scale the image[edit | edit source]

Below is another variant that seems is more robust with respect to drawings that use strange coordinates. We import the original huge circle with its original size, but we then scale transform it. 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" />
  </head>
  <body>
    <h1>HTML5 SVG Demo - embed svg file with SVG image</h1>

<p> A huge red circle that was embeded using the svg "image" tag plus a scale transform:</p>
<svg id="circle" height="60" width="60" 
     xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" >
  <g transform="scale(0.1)">
    <image x="0" y="0" height="600" width="600" xlink:href="huge-red-circle.svg" />
  </g>
</svg>
</body>
</html>

Pay attention to the following tips:

  • Height and width of the image tag must correspond (roughly) to the size of the imported SVG. Look at its SVG root tag. If weight and height are missing in the SVG file add it yourself, if possible
  • Height and width of the svg root tag should somehow fit the scaled image. E.g. if you import a 100x200 and make it twice as big, then svg root dimensions should be at least 200x400.

Importing with original size and create a viewBox[edit | edit source]

This solution also offers a way to rescale. viewBox attributes can do more, but we won't cover that. 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" />
  </head>

  <body>
    <h1>HTML5 SVG Demo - embed svg file with SVG image and viewBox</h1>

<p> A huge red circle that was embeded using the svg "image" tag plus a change of user coordinates with a a viewBox</p>
<svg id="circle" height="60" width="60" 
     xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" >
  <svg viewBox="0 0 600 600">
    <image x="0" y="0" height="600" width="600" xlink:href="huge-red-circle.svg" />
  </svg>
</svg>
</body>
</html>

Playing with viewBox

Possibilities are endless, but viewBox is hard to understand ...

The following code shows how to stretch and reposition (move the viewport up) 

<!DOCTYPE html>
<html>
  <head>
    <title>HTML5 SVG demo</title>
    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" />
  </head>

  <body>
    <h1>HTML5 SVG Demo - embed svg file with SVG image and distort with viewBox</h1>

<p> A huge red circle that was embeded using the svg "image" tag plus a change of user coordinates with a a viewBox</p>
<svg style="border-style:solid;border-width:1px;" id="circle" height="60" width="120" 
     xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" >
  <svg viewBox="0 -300 600 1200" preserveAspectRatio="none" >
    <image x="0" y="0" height="600" width="600" xlink:href="huge-red-circle.svg" />
  </svg>
</svg>
</body>
</html>

Creating text that floats around SVG images[edit | edit source]

You can use ordinary HTML CSS properties to style the svg element. The following SVG graphic will float to the right: 

<svg style="float:right" width="81" height="127" xmlns="http://www.w3.org/2000/svg">
 <!-- Created with SVG-edit - http://svg-edit.googlecode.com/ -->
 <g>
  <title>Simple tree</title>
  <rect fill="#7f3f00" stroke="#000000" stroke-width="0" x="32.26172" y="50.26172" width="17" height="77" id="svg_3"/>
  <circle fill="#007f3f" stroke="#000000" stroke-width="0" cx="40.26172" cy="40.26172" r="40.26172" id="svg_1"/>
 </g>
</svg>

The following code would make an image float to the left and add a small margin: 

<svg width="43" height="65" style="float:left;margin:5px;" 
    xmlns="http://www.w3.org/2000/svg">
....
</svg>

Live example that includes some long SVG code (look at the source):

Links[edit | edit source]

Specifications (very technical reading !)
ViewBox
Licensed under CC BY-SA 3.0 | Source: https://edutechwiki.unige.ch/en/Using_SVG_with_HTML5_tutorial
38 views |
↧ Download this article as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF