Table of Contents Categories
  Encyclosphere.org ENCYCLOREADER
  supported by EncyclosphereKSF

Bis(triphenylphosphine)palladium chloride

Topic: Chemistry

 From HandWiki - Reading time: 5 min
Bis(triphenylphosphine)palladium chloride
Identifiers
3D model (JSmol)
ChemSpider
Properties
PdCl2(PPh3)2
Molar mass 701.90 g·mol−1
Appearance yellow powder
Melting point 260 °C (decomposed around 300 °C)
insoluble
Solubility soluble in chloroform, hexane, toluene, benzene, acetone[1]
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondFlammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilHealth code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformReactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
2
0
Flash point 181.7 °C
Related compounds
Related compounds
 Bis(triphenylphosphine)platinum chloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Infobox references
Tracking categories (test):

Bis(triphenylphosphine)palladium chloride is a coordination compound of palladium containing two triphenylphosphine and two chloride ligands. It is a yellow solid that is soluble in some organic solvents. It is used for palladium-catalyzed coupling reactions, e.g. the Sonogashira–Hagihara reaction. The complex is square planar. Many analogous complexes are known with different phosphine ligands.

Preparation and reactions

This compound may be prepared by treating palladium(II) chloride with triphenylphosphine:[2][3]

PdCl2 + 2 PPh3 → PdCl2(PPh3)2

Upon reduction with hydrazine in the presence of excess triphenylphosphine, the complex is a precursor to tetrakis(triphenylphosphine)palladium, Pd(PPh3)4:[4]

2 PdCl2(PPh3)2 + 4 PPh3 + 5 N2H4 → 2 Pd(PPh3)4 + N2 + 4 N2H5+Cl−

Structure

Several crystal structures containing PdCl2(PPh3)2 have been reported. In all of the structures, PdCl2(PPh3)2 adopts a square planar coordination geometry and the trans isomeric form.[5][6][7][8]

Applications

The complex is used as a pre-catalyst for a variety of coupling reactions.[9]

One-pot Procedure for the Synthesis of Unsymmetrical Diarylalkynes.

The Suzuki reaction was once limited by high levels of catalyst and the limited availability of boronic acids. Replacements for halides were also found, increasing the number of coupling partners for the halide or pseudohalide as well. Using bis(triphenylphosphine)palladium chloride as the catalyst, triflates and boronic acids have been coupled on an 80 kilogram scale in good yield.[10] The same catalyst is effective for the Sonogashira coupling.[11]

See also

References

  1. ↑ "PdCl2(PPh3)2". https://www.chemspider.com/Chemical-Structure.75895.html. 
  2. ↑ Norio Miyaura; Akira Suzuki (1990). "Palladium-Catalyzed Reaction of 1-Alkenylboronates with Vinylic Halides: (1Z,3E)-1-Phenyl-1,3-octadiene". Organic Syntheses 68: 130. doi:10.15227/orgsyn.068.0130. 
  3. ↑ Hiroshi Itatani; J.C.Bailar (1967). "Homogeneous Catalysis in the Reactions of olefinic Substances. V.Hydrogenation of Soybean Oil Methyl Ester with Triphenylphosphine and Triphenylarsine Palladium Catalysts". Journal of the American Oil Chemists' Society 44: 147. doi:10.1007/BF02558176. 
  4. ↑ D. R. Coulson (1972). "Tetrakis(triphenylphosphine)palladium(0)". Inorganic Syntheses. 13. 121–124. doi:10.1002/9780470132449.ch23. ISBN 978-0-470-13244-9. 
  5. ↑ G. Ferguson; R. McCrindle; A. J. McAlees; M. Parvez (1982). "trans-Dichlorobis(triphenylphosphine)palladium(II)". Acta Crystallogr. B38 (10): 2679–2681. doi:10.1107/S0567740882009583. 
  6. ↑ G. Steyl (2006). "trans-Dichlorobis(triphenylphosphine)palladium(II) dichloromethane solvate". Acta Crystallogr. E 62 (6): m1324–m1325. doi:10.1107/S1600536806017521. 
  7. ↑ J. Pons; J. García-Antón; X. Solans; M. Font-Bardia; J. Ros (2008). "trans-Dichloridobis(triphenylphosphine)palladium(II)". Acta Crystallogr. E 64 (Pt 5): m621. doi:10.1107/S1600536808008337. PMID 21202176. 
  8. ↑ A. Naghipour; A. Ghorbani-Choghamarani; H. Babaee; M. Hashemi; B. Notash (2017). "Crystal structure of a novel polymorph of trans-dichlorobis (triphenylphosphine) palladium (II) and its application as a novel, efficient and retrievable catalyst for the amination of aryl halides and stille cross-coupling reactions". J. Organomet. Chem. 841: 31–38. doi:10.1016/j.jorganchem.2016.10.002. 
  9. ↑ René Severin; Jessica Reimer; Sven Doye (2010). "One-Pot Procedure for the Synthesis of Unsymmetrical Diarylalkynes". J. Org. Chem. 75 (10): 3518–352. doi:10.1021/jo100460v. PMID 20420397. 
  10. ↑ Jacks, T. E.; Belmont, Daniel T.; Briggs, Christopher A.; Horne, Nicole M.; Kanter, Gerald D.; Karrick, Greg L.; Krikke, James J.; McCabe, Richard J. et al. (2004). "Development of a Scalable Process for CI-1034, an Endothelin Antagonist". Organic Process Research & Development 8 (2): 201–212. doi:10.1021/op034104g. 
  11. ↑ Chinchilla, R.; Nájera, C. (2007). "The Sonogashira Reaction: A Booming Methodology in Synthetic Organic Chemistry". Chem. Rev. 107 (3): 874–922. doi:10.1021/cr050992x. PMID 17305399. 



Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Bis(triphenylphosphine)palladium_chloride&oldid=548342"
Licensed under CC BY-SA 3.0 | Source: https://handwiki.org/wiki/Chemistry:Bis(triphenylphosphine)palladium_chloride
1 |
↧ Download this article as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF