Categories
  Encyclosphere.org ENCYCLOREADER
  supported by EncyclosphereKSF

Cascade (chemical engineering)

From HandWiki - Reading time: 1 min

A diagram showing a cascade of three fixed-bed reactors (and three fired heaters associated with them).

In chemical engineering, a cascade is a plant consisting of several similar stages with each processing the output from the previous stage. Cascades are most commonly used in isotope separation, distillation, flotation and other separation or purification processes.

Cascade process

Cascade process is any process that takes place in a number of steps, usually because the single step is too inefficient to produce the desired result. For example, in some uranium-enrichment processes the separation of the desired isotope is only poorly achieved in a single stage; to achieve better separation the process has to be repeated a number of times, in a series, with the enriched fraction of one stage being fed to the succeeding stage for further enrichment. Another example of cascade process is that operating in a cascade liquefier.[1]

Examples

If a still removes 99% of impurities from water (leaving .01 the original amount of impurities), a cascade of three stills will leave (1-0.99)3 = 0.000001 = 0.0001% the amount of impurities (99.9999% removed).

References

  1. oxford dictionary of science, 4th edition, 1999.ISBN:0-19-280098-1




Licensed under CC BY-SA 3.0 | Source: https://handwiki.org/wiki/Chemistry:Cascade_(chemical_engineering)
12 views | Status: cached on July 28 2024 17:44:16
↧ Download this article as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF