Type | Private (GmbH & Co. KG) |
---|---|
Industry | Automotive |
Founded | 1965 |
Founder | Burkard Bovensiepen |
Headquarters | Buchloe, Germany |
Products | Automobiles |
Parent | BMW |
Website | www.alpina-automobile.de |
Alpina Burkard Bovensiepen GmbH & Co. KG is an automobile manufacturing company based in Buchloe, in the Ostallgäu district of Bavaria, Germany that develops and sells high-performance versions of BMW cars. Alpina works closely with BMW and their processes are integrated into BMW's production lines, and is recognized by the German Ministry of Transport as an automobile manufacturer, in contrast to other performance specialists, which are aftermarket tuners. The Alpina B7 is produced at the same assembly line in Dingolfing, Germany (BMW Plant Dingolfing), as BMW's own 7 Series. The B7's twin-turbo 4.4-litre V8 is assembled by hand at Alpina's facility in Buchloe, Germany, before being shipped to BMW for installation, and the assembled vehicle is then sent back to Alpina for finishing touches.[1][2]
The firm was founded in 1965 by Burkard Bovensiepen (1936–2023),[3] a member of the Bovensiepen family of industrialists. On 10 March 2022, BMW announced its intention to acquire Alpina.[4] That same day, BMW wrote on its website that it had officially acquired the brand.[5]
Alpina's roots can be traced back to 1962, when Burkard Bovensiepen developed a Weber dual carburetor for the BMW 1500. This carburetor was well received by the automotive press, as well as BMW's own sales boss Paul G. Hahnemann. In 1964, BMW certified the quality of this Alpina product by awarding BMW vehicles fitted with the Alpina system the full factory guarantee.
Alpina Burkard Bovensiepen KG was established on 1 January 1965 in Kaufbeuren, Bavaria. The company had eight employees. Although Alpina started by producing typewriters, the original Alpina ceased to exist at the end of the 1960s in their attempt to move into the textile industry. In 1965, Burkard established a BMW tuning business, following his success with investments in the stock market. He started the tuning business in an outbuilding of the original Alpina typewriter factory. The company worked on carburetors and revised cylinder heads. By 1970, with seventy employees, the original facility changed locations from Kaufbeuren to Buchloe.
In its first years, Alpina established its core competency by tuning carburetors and crankshafts to extract more power from BMW engines, elements that eventually defined the company's logo, which came into being in 1967. Between 1968 and 1977, Alpina cars did very well in competition. The highlight was in 1970, when the team's cars won the European Touring Car Championship, the German Hillclimb Championship, rally and track racing championships, and the prestigious Spa 24 Hours.
Alpina officially withdrew from racing in 1988 because of capacity limitations and restrictions. Tied to this was the decision to begin production of a new set of BMW Alpina automobiles.[6]
Since 1983, Alpina has been recognized by the German Federal Ministry of Transport as an automobile manufacturer,[5] thus Alpina-built cars are branded and registered as Alpina instead of BMW, although an Alpina can be serviced at all BMW dealerships, and is fully covered if a warranty issue arises. Alpina automobiles are also sold at some BMW dealerships.
Distinctive features of Alpina vehicles are the fact that these models are literally "manu-factured", meaning "hand-made". The production process switches between fine tuning the engine, delivering it to the BMW plant, marrying engine and body there, and bringing it back to Alpina for interior upgrade with Alpina's specific components, again all in a hand-made process that allows only limited production numbers. Besides engine and interior, Alpina also optimizes the transmission and installs steering wheel-mounted button shifters (called Switch-Tronic) on most cars, with paddle shifters used on the B4 S Edition 99. This has historic reasons, since Alpina was the first to mount shifting buttons on the steering wheel.[7] Distinguishing marks from the exterior are the 20-spoke alloy wheels with hidden valves under the center cap and the "Alpina Blue" or "Alpina Green" metallic exterior colours. Inside, "the finest materials are used to fabricate the exclusive feel". A typical blue and green pattern is often used on interior parts such as stitching on leather. A thin, pinstriped style outside body decor set in gold or silver is also a hallmark of older Alpina cars which is an option on new Alpina models. Another distinguishing mark is the Alpina wordmark at the bottom of the car's front, a design heralded from its racing cars. A metal plate inside also proves the heritage and the serial number of the car.
Compared to cars from BMW's in-house performance subsidiary, BMW M, Alpina's vehicles have more emphasis on Touring, higher torque, and have their own Alpina-style shiftable ZF automatic transmissions instead of manual or semi-automatic transmissions.[8] For instance, regarding the high performance variants of the BMW E60 5 Series, the B5 offers a different take on performance and how to accomplish it. Unlike BMW M's own M5 which has a naturally aspirated, high-revving 5.0L V10, the Alpina B5 uses a supercharged 4.4L V8 which produces similar horsepower and greater torque at lower rpm.
The Alpina XD3 made its debut at the 2018 Geneva Motor Show. The XD3 is fitted with an Alpina-modified version of BMW's B57 diesel inline-six engine. In the quad-turbo left-hand drive version, the engine outputs 388 PS (383 hp; 285 kW) and 770 N⋅m (568 lbf⋅ft), giving a 0–100 km/h (62 mph) time of 4.6 seconds and a top speed of 266 km/h (165 mph). In the bi-turbocharged right-hand drive version, the engine outputs 333 PS (328 hp; 245 kW) and 700 N⋅m (516 lbf⋅ft), giving it a 0–100 km/h (62 mph) time of 4.9 seconds and a top speed of 254 km/h (158 mph).
The Alpina XD4 debuted at the 2018 Geneva Motor Show.[20] It is fitted with a modified version of the B57 diesel engine with four turbochargers,[21] and outputs 285 kW (382 hp) and 568 N⋅m (419 lbf⋅ft).[22] The XD4 is the fastest accelerating diesel-powered production SUV, and can accelerate from 0–100 km/h (62 mph) in 4.6 seconds and has a top speed of 268 km/h (167 mph).[23] It is available in left-hand drive markets only.[24]
The F30 Alpina B3 Bi-Turbo was in production since March 2013. It is based on the BMW F30 335i with a bi-turbocharged 3.0 litre six cylinder. The 301 kW (409 PS; 404 hp) engine with 600 N⋅m (443 lb⋅ft) of torque accelerates the B3 from 0–100 km/h (62 mph) in 4.0 seconds. The top speed is 305 km/h (190 mph). The B3 Biturbo is available as a sedan or touring, both can be combined with xDrive four-wheel drive.
Alpina modified the exterior with front and rear spoilers and a quad-exit exhaust system.
In March 2017, Alpina revised the engine of the B3, It now produces 324 kW (441 PS; 434 hp).
A new model based on the G20 3 Series replaced the F30 model, it uses the S58 3.0 litre bi-turbo inline six engine producing 340 kW (462 PS; 456 hp) and 700 N⋅m (516 lb⋅ft) of torque, which is 150 N⋅m (111 lb⋅ft) more than the BMW M3, and 50 N⋅m (37 lb⋅ft) more than the BMW M3 Competition.
The Alpina D3 Bi-Turbo was presented at IAA 2013. It is based on the BMW F30. It is available as a Saloon or Touring version with a 3.0-litre straight-six, bi-turbocharged diesel engine with 257 kW (349 PS; 345 hp) of Power and 700 N⋅m (516 lb⋅ft) of torque. The Touring is also available with all-wheel drive, based on BMW xDrive.[25]
Launched in 2014, the B4 is based on the 435i. The N55 straight-six engine is modified by using twin-turbochargers, a sixty-one percent larger intercooler and a new crankshaft. The engine also utilises new pistons, all of these modifications allow the engine to generate 408 PS (300 kW; 402 hp) between 5,550 and 6,250 RPM and 601 N⋅m (443 lb⋅ft) between 3,000 and 4,000 RPM.
The Alpina B5 was introduced at the 2017 Geneva Motor Show in all-wheel drive Saloon or Touring versions.[26] The B5 features a 4.4-litre N63M30 V8 engine[27] that generates a maximum power output of 447 kW (608 PS; 599 hp) and 800 N⋅m (590 lb⋅ft) of torque.[28] Based on the N63B44O2 V8, it has uprated pistons,[29] new twin-scroll Garrett turbochargers[30] and new spark plugs by NGK. The B5 can accelerate from 0–100 km/h (0–62 mph) 3.5 seconds with a top speed of 330 km/h (205 mph), making it the fastest estate car currently in production.[31][additional citation(s) needed]
The Alpina D5 S debuted at the 2017 Frankfurt Motor Show[32] in all-wheel drive only sedan and Touring variants. The D5 S uses a modified 3.0-liter B57D30 diesel inline-six engine. The engine has three turbochargers and produces 285 kW (387 PS; 382 hp) and 800 N⋅m (590 lb⋅ft) of torque in left-hand drive markets, whereas it has two turbochargers and produces 240 kW (326 PS; 322 hp) and 700 N⋅m (516 lb⋅ft) of torque in right-hand drive markets.[33] The left-hand drive D5 S saloon has a top speed of 286 km/h (178 mph) and a 0–100 km/h (62 mph) acceleration time of 4.4 seconds.[34] Alpina claims it is the fastest diesel-powered production car in the world.[35] The right-hand drive, saloon-only version has a 0–100 km/h (62 mph) acceleration time of 4.9 seconds and a top speed of 275 km/h (171 mph).[36]
The high performance Alpina B6 Gran Coupé xDrive was launched in 2014. This model is conceived by Alpina and based on the 650i. This model is sold by BMW only in the United States and in Canada (but Alpina also independently offers it in other countries). The Alpina B6 Gran Coupé 2015 model shares the 540 hp (403 kW; 547 PS), 730 N⋅m (538 lb⋅ft) 4.4-litre twin-turbo V8 of the Alpina B5 BiTurbo and B6 BiTurbo coupé which are not sold in North America. The 2016-2019 model produces 600 hp (447 kW; 608 PS) and 590 lb⋅ft (800 N⋅m) of torque. Specification includes a more luxurious interior, 20-inch Alpina light-alloy wheels, aerodynamic elements and exclusive Alpina trims and paints. The Alpina B6 can go from 0–100 km/h (62 mph) in 3.9 (3.8 for the 2016-2019 model) seconds and has a top speed of 318 km/h (198 mph). (324 km/h or 202 mph for the 2016-2019 model)[37]
The Alpina B7 is one of the two Alpina cars offered in the US and Canada, the other one being the Alpina B6.[38] The B7 is produced at the same assembly line in Dingolfing, Germany, along with BMW's own 7 Series.[citation needed] It can be equipped identically to a normal M760li. However, an exclusive Alpina Green finish is available.[39]
BMW permitted Alpina to produce a high-performance version of its flagship 7 Series, however they did not want it to be a high-revving, BMW M version (which would have been known as a "BMW M7" under the current nomenclature). It has also been suggested that there was no market for an M7 that would have featured the BMW M's trademark high-rev engine and twin-clutch automated manual transmission, and most customers who desired a performance option in the 7 Series would have gone for the V12-engined BMW 760Li.[40]
Competitors include the Mercedes-Benz S63 AMG and Audi S8.[18]
The Alpina B7 xDrive was announced by BMW North America on 8 February 2016 with sales starting in September 2016. With an electronically limited top speed of 310 km/h (193 mph) and a 0–100 km/h (62 mph) acceleration time of 3.7 seconds along with a sportier setup, it is the sportiest 7 Series[41] but is sold by BMW only in the United States and Canada.[42] The B7 is sold in other countries by Alpina as the B7 Bi-Turbo, with a delimited top speed of 330 km/h (205 mph).
The Alpina B7 features a 447 kW (608 PS; 599 hp) 4.4 litre twin-turbocharged V8 engine delivering 800 N⋅m (590 lb⋅ft) of torque and a more luxurious interior.[citation needed] It was unveiled at the 2016 Geneva Motor Show.
The face-lifted model, unveiled in February 2019, has a better power band which allows better performance, with a 0–100 km/h (62 mph) acceleration time of 3.6 seconds. The top speed of 330 km/h (205 mph) is now delimited worldwide.[43]
Alpina model | BMW donor model | Alpina Engine | Power at rpm | Torque at rpm | Production |
---|---|---|---|---|---|
A1/3 | E21 320 | A1/3 | 90 kW (122 PS; 121 bhp) at 5,800 | 170 N⋅m (125 ft⋅lbf) at 4,000 | 1975–1977 |
A2/3 | E21 320 | A2/3 | 112 kW (152 PS; 150 bhp) at 6,900 | 173 N⋅m (128 ft⋅lbf) at 5,500 | 1975–1977 |
A4/3 | E21 320i | A4/3 | 119 kW (162 PS; 160 bhp) at 6,700 | 180 N⋅m (133 ft⋅lbf) at 5,500 | 1976–1977 |
A4S/3 | E21 320i | A4S/3 | 125 kW (170 PS; 168 bhp) at 6,700 | 180 N⋅m (133 ft⋅lbf) at 5,500 | 1976–1977 |
C1 2,3 | E21 323i | C1 | 125 kW (170 PS; 168 bhp) at 6,000 | 210 N⋅m (155 ft⋅lbf) at 4,500 | 1980–1983 |
B6 2,8 | E21 323i | B6 | 147 kW (200 PS; 197 bhp) at 6,200 | 248 N⋅m (183 ft⋅lbf) at 4,500 | 1978–1981 |
B6 2,8 | E21 323i | B6 | 160 kW (218 PS; 215 bhp) at 6,000 | 265 N⋅m (195 ft⋅lbf) at 5,000 | 1981–1983 |
C1 2,3 / 1 | E30 323i | C1/1 | 125 kW (170 PS; 168 bhp) at 6,000 | 225 N⋅m (166 ft⋅lbf) at 5,000 | 1983–1985 |
C2 2,5 | E30 325i | C2 | 136 kW (185 PS; 182 bhp) at 5,800 | 246 N⋅m (181 ft⋅lbf) at 4,800 | 1985-1986 |
C1 2,5 | E30 325i | C2/3 | 140 kW (190 PS; 188 bhp) at 5,800 | 235 N⋅m (173 ft⋅lbf) at 5,000 | 1986–1987 |
C2 2,7 | E30 325i | C2/1 | 154 kW (209 PS; 207 bhp) at 5,800 | 267 N⋅m (197 ft⋅lbf) at 4,500 | 1986–1987 |
C2 2,7 | E30 325i | C2/2 | 149 kW (203 PS; 200 bhp) at 6,000 | 265 N⋅m (195 ft⋅lbf) at 4,800 | 1987-1987 |
B3 2,7 | E30 325i | C2/2 | 150 kW (204 PS; 201 bhp) at 6,000 | 265 N⋅m (195 ft⋅lbf) at 4,800 | 1987–1992 |
B6 2,8 / 1 | E30 323i/325i | B6/2 | 154 kW (209 PS; 207 bhp) at 6,100 | 270 N⋅m (199 ft⋅lbf) at 5,000 | 1984–1986 |
B6 3,5 | E30 323i/325i | B10/2 | 192 kW (261 PS; 257 bhp) at 6,000 | 346 N⋅m (255 ft⋅lbf) at 4,000 | 1985–1987 |
B6 3,5 | E30 325i | B10/3 | 187 kW (254 PS; 251 bhp) at 5,900 | 320 N⋅m (236 ft⋅lbf) at 4,000 | 1986–1987 |
B6 3,5 | E30 325i | B10/5 | 187 kW (254 PS; 251 bhp) at 5,900 | 320 N⋅m (236 ft⋅lbf) at 4,000 | 1987–1990 |
B6 3,5 S | E30 M3 | B10/5 | 187 kW (254 PS; 251 bhp) at 5,900 | 320 N⋅m (236 ft⋅lbf) at 4,000 | 1987–1990 |
B6 2,8 | E36 325i | E1 | 177 kW (241 PS; 237 bhp) at 5,900 | 293 N⋅m (216 ft⋅lbf) at 4,700 | 1992–1993 |
B3 3,0 | E36 325i | E3 | 184 kW (250 PS; 247 bhp) at 5,700 | 320 N⋅m (236 ft⋅lbf) at 4,400 | 1993–1996 |
B3 3,2 | E36 328i | E4 | 195 kW (265 PS; 261 bhp) at 5,800 | 330 N⋅m (243 ft⋅lbf) at 4,400 | 1996–1999 |
B8 4,6 | E36 328i | F2/1 | 245 kW (333 PS; 329 bhp) at 5,700 | 470 N⋅m (347 ft⋅lbf) at 3,900 | 1995–1998 |
B3 3,3 | E46 328i | E4/4 | 206 kW (280 PS; 276 bhp) at 6,200 | 335 N⋅m (247 ft⋅lbf) at 4,500 | 1999–2002 |
B3 3,3 ALLRAD | E46 330ix | E4/8 | 206 kW (280 PS; 276 bhp) at 6,200 | 335 N⋅m (247 ft⋅lbf) at 4,500 | 2001–2005 |
B3 S | E46 330i | E5/1 | 224 kW (305 PS; 300 bhp) at 6,300 | 362 N⋅m (267 ft⋅lbf) at 4,800 | 2002–2006 |
B3 Bi-Turbo | E90/E91/E92/E93 335i | K2 | 265 kW (360 PS; 355 bhp) at 5,500 | 500 N⋅m (369 ft⋅lbf) at 3,800 | 2007–2010 |
B3 Bi-Turbo Allrad | E90/E91/E92 335xi | K2 | 265 kW (360 PS; 355 bhp) at 5,500 | 500 N⋅m (369 ft⋅lbf) at 3,800 | 2008–2010 |
B7 Turbo | E12 528i | B7 | 221 kW (300 PS; 296 bhp) at 6,000 | 462 N⋅m (341 ft⋅lbf) at 3,000 | 1978–1982 |
B7 S Turbo | E12 528i | B7S | 243 kW (330 PS; 326 bhp) at 5,800 | 500 N⋅m (369 ft⋅lbf) at 3,000 | 1981–1982 |
B9 3,5 | E28 528i | B9 | 180 kW (245 PS; 241 bhp) at 5,700 | 320 N⋅m (236 ft⋅lbf) at 4,000 | 1981–1983 |
B9 3,5 / 1 | E28 528i | B9/1 | 180 kW (245 PS; 241 bhp) at 5,700 | 320 N⋅m (236 ft⋅lbf) at 4,000 | 1983–1985 |
B7 Turbo / 1 | E28 528i/535i | B7/1 | 221 kW (300 PS; 296 bhp) at 5,800 | 501 N⋅m (370 ft⋅lbf) at 3,000 | 1984–1987 |
B10 3,5 | E28 535i | B10 | 192 kW (261 PS; 257 bhp) at 5,800 | 346 N⋅m (255 ft⋅lbf) at 4,000 | 1985–1987 |
B7 Turbo / 1 | E28 535i | B7/3 | 235 kW (320 PS; 315 bhp) at 5,700 | 520 N⋅m (384 ft⋅lbf) at 2,400 | 1986–1987 |
B10 3,5 / 1 | E34 535i | B11/3 | 187 kW (254 PS; 251 bhp) at 6,000 | 325 N⋅m (240 ft⋅lbf) at 4,000 | 1988–1992 |
B10 Bi-Turbo | E34 535i | B7/5 | 265 kW (360 PS; 355 bhp) at 6,000 | 520 N⋅m (384 ft⋅lbf) at 4,000 | 1989–1994 |
B10 3,0 ALLRAD | E34 525ix | E3/1 | 170 kW (231 PS; 228 bhp) at 5,800 | 312 N⋅m (230 ft⋅lbf) at 4,200 | 1993–1996 |
B10 4,0 | E34 540i | F1 | 232 kW (315 PS; 311 bhp) at 5,800 | 410 N⋅m (302 ft⋅lbf) at 4,600 | 1993–1996 |
B10 4,6 | E34 540i | F2 | 250 kW (340 PS; 335 bhp) at 5,700 | 480 N⋅m (354 ft⋅lbf) at 3,900 | 1994–1996 |
B10 3,2 | E39 528i | E4/3 | 191 kW (260 PS; 256 bhp) at 5,900 | 330 N⋅m (243 ft⋅lbf) at 4,300 | 1997–1998 |
B10 3,3 | E39 528i | E4/5 | 206 kW (280 PS; 276 bhp) at 6,200 | 335 N⋅m (247 ft⋅lbf) at 4,500 | 1999–2003 |
B10 V8 | E39 540i | F3 | 250 kW (340 PS; 335 bhp) at 5,700 | 470 N⋅m (347 ft⋅lbf) at 3,900 | 1997–1998 |
B10 V8 | E39 540i | F4 | 255 kW (347 PS; 342 bhp) at 5,700 | 480 N⋅m (354 ft⋅lbf) at 3,700 | 1998–2002 |
B10 V8 S | E39 540i | F5 | 276 kW (375 PS; 370 bhp) at 5,800 | 510 N⋅m (376 ft⋅lbf) at 3,800 | 2002–2004 |
B5 | E60/E61 545i | H1 | 368 kW (500 PS; 493 bhp) at 5,500 | 700 N⋅m (516 ft⋅lbf) at 4,250 | 2005–2007 |
B5S | E60/E61 550i | H2 | 390 kW (530 PS; 523 bhp) at 5,500 | 725 N⋅m (535 ft⋅lbf) at 4,750 | 2007–2010 |
B7 Turbo Coupé | E24 630CSi | B7 | 221 kW (300 PS; 296 bhp) at 6,000 | 462 N⋅m (341 ft⋅lbf) at 2,500 | 1978–1982 |
B7 S Turbo Coupé | E24 635CSi | B7S | 243 kW (330 PS; 326 bhp) at 5,800 | 500 N⋅m (369 ft⋅lbf) at 3,000 | 1982-1982 |
B9 3,5 Coupé | E24 635CSi | B9 | 180 kW (245 PS; 241 bhp) at 5,700 | 320 N⋅m (236 ft⋅lbf) at 4,000 | 1982-1982 |
B9 3,5 Coupé / 1 | E24 635CSi | B9/1 | 180 kW (245 PS; 241 bhp) at 5,700 | 320 N⋅m (236 ft⋅lbf) at 4,000 | 1982–1985 |
B7 Turbo Coupé / 1 | E24 635CSi | B7/2 | 243 kW (330 PS; 326 bhp) at 5,700 | 512 N⋅m (378 ft⋅lbf) at 2,400 | 1984–1987 |
B10 3,5 Coupé | E24 635CSi | B10 | 192 kW (261 PS; 257 bhp) at 6,000 | 346 N⋅m (255 ft⋅lbf) at 4,000 | 1985–1987 |
B7 Turbo Coupé / 1 | E24 635CSi | B7/3 | 235 kW (320 PS; 315 bhp) at 5,700 | 520 N⋅m (384 ft⋅lbf) at 2,400 | 1986–1988 |
B6 | E63/E64 650i | H1 | 368 kW (500 PS; 493 bhp) at 5,500 | 700 N⋅m (516 ft⋅lbf) at 4,250 | 2006–2008 |
B11 3,5 | E32 735i | B11 | 184 kW (250 PS; 247 bhp) at 5,700 | 330 N⋅m (243 ft⋅lbf) at 4,000 | 1987-1987 |
B11 3,5 | E32 735i | B11/1 | 176 kW (239 PS; 236 bhp) at 5,700 | 310 N⋅m (229 ft⋅lbf) at 4,500 | 1987-1987 |
B11 3,5 | E32 735i | B11/3 | 187 kW (254 PS; 251 bhp) at 6,000 | 325 N⋅m (240 ft⋅lbf) at 4,000 | 1987–1993 |
B11 4,0 | E32 740i | F1 | 232 kW (315 PS; 311 bhp) at 5,800 | 410 N⋅m (302 ft⋅lbf) at 4,600 | 1993–1994 |
B12 5,0 | E32 750i | D1 | 257 kW (350 PS; 345 bhp) at 5,300 | 470 N⋅m (347 ft⋅lbf) at 4,000 | 1988–1994 |
B12 5,7 E-KAT | E38 750i | D3 | 285 kW (387 PS; 382 bhp) at 5,200 | 560 N⋅m (413 ft⋅lbf) at 4,100 | 1995–1998 |
B12 6,0 E-KAT | E38 750i | D3/2 | 316 kW (430 PS; 424 bhp) at 5,400 | 600 N⋅m (443 ft⋅lbf) at 4,200 | 1999–2001 |
B7 | E65/E66 745i | H1 | 368 kW (500 PS; 493 bhp) at 5,500 | 700 N⋅m (516 ft⋅lbf) at 4,250 | 2003–2008 |
B12 5,0 Coupé | E31 850i/850Ci | D1/1 | 257 kW (350 PS; 345 bhp) at 5,300 | 470 N⋅m (347 ft⋅lbf) at 4,000 | 1990–1994 |
B12 5,7 Coupé | E31 850CSi | D2 | 306 kW (416 PS; 410 bhp) at 5,400 | 570 N⋅m (420 ft⋅lbf) at 4,000 | 1992–1996 |
Roadster Limited Edition | Z1 | C2/6 | 147 kW (200 PS; 197 bhp) at 6,000 | 261 N⋅m (193 ft⋅lbf) at 4,900 | 1990–1991 |
Roadster V8 | E52 Z8 | F5 | 280 kW (381 PS; 375 bhp) at 5,800 | 520 N⋅m (384 ft⋅lbf) at 3,800 | 2002–2003 |
Roadster S | E85 Z4 | E5/2 | 221 kW (300 PS; 296 bhp) at 6,300 | 362 N⋅m (267 ft⋅lbf) at 4,800 | 2003–2005 |
Alpina model | BMW donor model | Alpina Engine | Power at rpm | Torque at rpm | Production |
---|---|---|---|---|---|
D10 BITURBO | E39 530d | G1 | 180 kW (245 PS; 241 bhp) at 4,200 | 500 N⋅m (369 ft⋅lbf) at 3,500 | 2000–2003 |
D3 | E90/E91 320d | M47 | 147 kW (200 PS; 197 bhp) at 4,000 | 410 N⋅m (302 ft⋅lbf) at 2,000 | 2005–2008 |
D3 Bi-Turbo[46] | E90/E91 3 series (engine from BMW 123d) | N47 | 157 kW (213 PS; 211 bhp) at | 450 N⋅m (332 ft⋅lbf) at 2,000-2,500 | 2008-2013 |
Alpina XD3 Bi-Turbo: based on the BMW F25 X3 - featuring a 3 L straight-six bi-turbo Diesel engine, delivering 350 PS (257 kW; 345 hp) and 700 N⋅m (516 lb⋅ft).[47]
The Alpina C1 was based on the E21 323i and was among their most popular early models, providing superior performance over the unmodified car. The C1 2.3 made 125 kW (168 hp) and 225 N⋅m (166 lb⋅ft) of torque. 0–100 km/h (0–62 mph) is achieved in 7.8 seconds. Top speed was 213 km/h (132 mph).[48] The extra power is due to special Mahle pistons, and a special exhaust and ignition system. It also received dry-sump lubrication and a short-ratio five-speed gearbox.[48] Only 35 C1 cars were built, making it one of the rarest Alpina models. As BMW released the 325i, Alpina responded with the C2 2.5, and later the 2.7 models, providing between 190–210 hp (142–157 kW). The brakes and suspension were also upgraded.
The C1 2.5 and early C2 / 2.6* models used the M20B23 (2,3L) engine, but bore and stroke were increased to achieve a displacement of 2552 cm3. Alpina reworked the head which was ported and polished, installed harder valve springs and a hotter cam. The intake manifold was also reworked, and Alpina used a larger throttle body. It produced 136 kW (182 hp), with 246 N⋅m (181 lb⋅ft) of torque. Alpina claimed 0–100 km/h (62 mph) acceleration in 7.1 seconds. Top speed was 220 km/h (137 mph). Production is unclear, with estimates ranging from 35 cars built to around 400 depending on the source.[49]
An interesting variant of the M20 engine was Alpina's C2. The first C2 combined the wider bore of the M20B25 with the slightly larger 76.8 mm (3.02 in) crankshaft of an M20B23, to create a torquier engine of 2552 cc. This version put out 185 PS (136 kW; 182 hp) and 265 N⋅m (195 lb⋅ft), 74 units were built between 1985 and November 1986.[50][51] After the C2 2.7 appeared in the spring of 1986, the 2.5 was slightly upgraded and gained 5 horsepower. However, to indicate its "little brother" position in the lineup, the name was changed to C1 2.5. When the September 1987 facelift model of the E30 was introduced, the 2.5 litre C1 was discontinued, although a few cars were finished into 1988.
The larger yet 2.7 litre unit was introduced in February 1986 in uncatalyzed C2/1 form.[51] This engine, sharing the dimensions of the M20B27, develops 210 PS (154 kW; 207 hp) at 5800 rpm and shows what the engine was really capable of.[52] Originally installed in the E30-based Alpina C2 2.7, with available four-wheel drive, the catalyzed C2/2 appeared in the interim C2 2.7 Kat in March 1987. This was then renamed "B3 2.7" five months later, by which time the "C2" labelled cars were discontinued. The B3 2.7 continued to be available until June 1992, in all body variants and drivetrain configurations (excepting automatics) in which the E30 was offered.[51] Around 1986, 67 "B6 2.7"-labelled C2-engined E30s were built for export to Japan, where the larger 3.0 L B6 3.5 had a hard time passing emissions regulations. Aside from the C2 drivetrain, the B6 2.7 is cosmetically identical to the B6 3.5.[53]
Later C2 2.5 models (C2 /3 2.5) were based on the 325i. Alpina used the M20B25 engine with very few modifications compared to earlier models. Again the cylinder head was decked to increase compression ratio, and it was ported and polished. The ECU was also remapped. Max power is 140 kW (188 hp), with 235 N⋅m (173 lb⋅ft) of torque. 0–100 km/h (62 mph) was achieved in 7.2 seconds. Top speed is 220 km/h (137 mph). Only 50 cars were built.[citation needed]
The C2 /1 2.7 used the 325e eta model engine block, crank and rods, but with custom flat head pistons provided by Mahle. Originally Alpina modified the "200" casting number cylinder head specific to the 325e with bigger intake valves, larger air intake ports, and redesigned the valve chamber for better flow. A more aggressive camshaft was used, with higher lift and duration, and harder valve springs were installed. Compression ratio was increased to 10.2:1. The C2/1 2.7 made 210 bhp (157 kW) with 267 N⋅m (197 lb⋅ft) of torque and was the fastest E30 available at the time[citation needed] (227 km/h (141 mph) top speed). 108 cars were built.[citation needed]
Later C2 /2 2.7 (and early 1987 B3 2.7) used the M20B25 block with ETA (325e) crank and rods. The intake manifold was also redesigned for better flow. The head was decked to improve compression ratio (10.1:1 for models with the 731 head, 9.6:1 for later "885" head models with catalytic converter) and matched with custom pistons - flat Mahle pistons for engines equipped with the 731 head, and domed KS pistons for engines equipped with the 885 head. Larger throttle bodies were installed (the C2/2 version uses the same throttle body as the M20B25 325i). A total of 309 cars were built between 1986 and 1987. The C2/2 2.7 makes 204 bhp (152 kW) and 266 N⋅m (196 lb⋅ft) of torque. Top speed is 224 km/h (139 mph) and 0–100 km/h (62 mph) is achieved in 7.5 seconds.
The B3 2.7 is similar to late C2/2 2.7 cars. It uses the M20B25 block with M20B27 crank and custom rods. The 885 head is exclusively used for the B3 model. The head is decked ~ 1 mm to improve CR to 9.6:1 and matched with custom domed KS or Mahle pistons. Intake and cylinder head are ported and polished. Custom ECU mapping is used. Engine management is Bosch Motronic 1.3. The B3 2.7 is equipped with a catalytic converter to conform to emission standard of the time. Performance numbers are similar to the later C2/2 2.7 cars. 254 cars were built from 1987 to 1992.
The Alpina B6 2.8 is based on the 323i, but uses the same B6/2 engine used in the B6 E21. The car makes 210 bhp (157 kW) and 270 N⋅m (199 lb⋅ft) of torque. Top speed is 230 km/h (143 mph). 0–100 km/h (62 mph) is achieved in 7.2 seconds. 533 cars were made from 1983 to 1986.[54]
The Alpina B6 3.5 is based on the 325i chassis, but uses the M30 "big six" 3430 cm3 engine, upgraded to 261 bhp (195 kW) and 346 N⋅m (255 lb⋅ft) of torque. 0–100 km/h (62 mph) is achieved in 6.4 seconds. The engine uses custom Mahle pistons and rods. The cylinder head was ported and polished, and a hotter cam was used. Top speed is 250 km/h (155 mph). Suspension and brakes were upgraded. Bigger ventilated disks and progressive springs were installed at the front. Only 210 cars were made from 1986 to 1990.[citation needed] The B6 3.5 was sold in Japan as the B6 2.7 and used the 2.7 L engine from the Alpina C2 as the larger 3.0 L engine was unable to pass emissions.[55]
The Alpina B6 3.5 S uses the M3 chassis. The 3.5 S, like the 3.5, uses the B10/2 M30 "big six" which makes 261 bhp (195 kW) and 346 N⋅m (255 lb⋅ft) of torque. Displacement is 3430 cm3. 0–100 km/h (62 mph) is achieved in 6.4 seconds. Top speed is 250 km/h (155 mph). The gearbox used is the Getrag 260/6 sport, known as a dog-leg gearbox. Only 62 cars were made from 1987 to 1990.[56]
The E30 BMW 333i was developed by Alpina for BMW South Africa. It was based on the 325i chassis and M30B32 engine, with numerous Alpina components common to the B6. Customers had to choose between power steering or air conditioning because of limited space in the engine bay.
To celebrate Alpina's victory in the 2011 ADAC GT Masters with an Alpina B6 GT3, Alpina decided to produce a limited run of the Alpina B3 S Bi-Turbo, called the Alpina B3 GT3.[57] The B3 GT3 features a new exhaust system developed in collaboration with Akrapovič which is 11 kg (24 lb) lighter than the standard exhaust and increases power to 300 kW (408 PS; 402 bhp) and 398 lb⋅ft (540 N⋅m) of torque. It features upgraded brakes with 380 mm discs, a Drexler limited slip differential and fully adjustable coilovers by KW at all four corners.[58][59]
The most noticeable changes were on the exterior: The B3 GT3 sports a carbon fibre rear wing, a special front splitter and 19" lightweight Alpina GT3 Classic wheels, painted in Himalaya Grey. The B3 GT3 was available in Black Sapphire metallic, Mineral White metallic, Alpina Blue metallic or with a full body vinyl wrap in the official GT3 design. The car could be ordered with an extra set of lightweight wheels (also 19" Alpina GT3 Classic, but equipped with Michelin Pilot Sport Cup+ tires) for use on the track.
Only 99 units were produced.[58]
The Alpina B2 is based on the 1976 BMW 5 Series (E12) 528i. The car featured a bored-out 230 hp (233 PS; 172 kW) 3.0-liter straight-six fitted with three double barrel carburetors.[60] Only eleven B2 were built before the introduction of the B7.[61]
The Alpina B7 Turbo is based on the BMW 5 Series (E12) 528i like its predecessor the B2. From 1978 to 1982 it featured a B7 engine with 221 kW (300 PS; 296 bhp) at 6,000 rpm and 462 N⋅m (341 ft⋅lbf) at 3,000 rpm. In 1981, Alpina introduced the B7 S Turbo with 243 kW (330 PS; 326 bhp) at 5,800 rpm and 500 N⋅m (369 ft⋅lbf) at 3,000 rpm. Only sixty B7 S Turbos were produced.[62][63]
The Alpina B9 was built in a small series from November 1981 to December 1985 on the basis of the BMW E28. About 500 examples were produced.[64]
The B9 is based on the 528i, whose M30-2.8-litre BMW engine was replaced by a 3.45-litre. Alpina tuned engine. The motor is based on the 3.5-liter version of the M30, but has been extensively modified. Alpina replaced the cylinder head, pistons, camshaft and modified the Bosch Motronic ECU. The engine transmits its power to the rear wheels via a 5-speed gearbox, an automatic transmission was also available. The suspension of the E28 has been modified with Bilstein gas dampers, as standard the B9 was delivered with 16-inch wheels (see picture). Alpina also modified the interior with among other things, Recaro seats, a new shifter and a modified instrument cluster.[64]
B9 3.5 | B9 3.5 / 1 | |
---|---|---|
Production period | 11/1981 – 08/1983 | 01/1983 – 12/1985 |
Motor type | B9 | |
Design | Inline-six | |
Displacement | 3453 cm3 | 3430 cm3 |
Power | 180 kW (245 PS; 241 hp) at 5,700 rpm | |
Torque | 320 N⋅m (236 ft⋅lbf) at 4,500 rpm | |
Acceleration 0–100 km/h (62 mph) | 6.7 s | |
Top speed | 240 km/h (149 mph) | |
Source | [65] |
In 1985, Alpina launched the B10 3.5, based on the BMW 535i (E28).
The 3.5 liter six-cylinder engine from the B6 3.5 was fitted to replace the B9's 3.45 liter. The output was 192 kW (261 PS; 257 hp). Only 77 examples of the B10 3.5 were produced.
Model | B10 3,5[66] | |
---|---|---|
Platform | BMW 535i E28 | |
Production period | 7/1985–12/1987 | |
Displacement | 3430 cm³ | |
Engine architecture | Inline-six | |
Power | 192 kW (261 PS; 257 hp) at 5,700 rpm | |
Torque | 346 N⋅m (255 lb⋅ft) at 4,000 rpm | |
Transmission | 5-speed manual transmission, or a 4-speed automatic transmission (optional) | |
Acceleration, 0–100 km/h (62 mph) |
6,4 s | |
Top speed | 250 km/h (155 mph) (automatic: 245 km/h (152 mph)) | |
Production | 77[67] |
The B10 3.5 was the first Alpina based on the BMW E34, With production beginning in April 1988 at launch it was the only available B10. The 3.5-liter BMW M30 inline-six cylinder engine of the BMW 535i was reworked with Mahle pistons, a modified cylinder-head, and a new camshaft increasing power from 155 kW (208 hp) to 187 kW (254 PS). In 1992 production was stopped after 572 cars were made.[68]
In 1993 the BMW M30 ended production forcing Alpina to discontinue the B10 3.5 and B10 BiTurbo. In April 1993 Alpina launched their replacement, the first B10 with an eight-cylinder engine. The BMW M60 engine of the BMW 540i was modified with higher-compression Mahle pistons and a modified air intake. Power was increased from 210 kW (286 PS) to 232 kW (311 hp). 49 examples were built.[69]
The B10 3.0 Allrad was based on the all-wheel drive BMW 525ix, launched in October 1993. The displacement of the six-cylinder single-VANOS and four-valve engine was increased from 2.5 liters to 3.0 liters and the performance was increased from 141 kW (192 PS) to 170 kW (231 PS). 64 sedans and 70 tourings were produced.
The B10 4.6 replaced the B10 biturbo from March 1994 onwards. The engine was a re-designed and enlarged V8 with a displacement of 4.6 liters, which was also used in the E36 Alpina B8 4.6 With 250 kW (340 PS), the power was only just below the B10 Bi-Turbo. 27 saloon cars were produced, and 19 Tourings - all were left hand drive except one right hand drive Touring.
Model | B10 3.5[70] | B10 Biturbo[70] | B10 3.0 Allrad / Touring[70] | B10 4.0 / Touring[70] | B10 4.6 / Touring[70] |
---|---|---|---|---|---|
Platform | BMW 535i E34 | BMW 525ix E34 | BMW 540i E34 | ||
Production period | 4/1988 – 12/1992 | 8/1989 – 3/1994 | 10/1993 – 5/1996 | 4/1993 – 8/1995 | 3/1994 – 4/1996 |
Displacement | 3430 cm3 | 2997 cm3 | 3982 cm3 | 4619 cm3 | |
Engine architecture | Inline six | V8 | |||
Power | 187 kW (254 PS; 251 hp) | 265 kW (360 PS; 355 hp) | 170 kW (231 PS; 228 hp) | 232 kW (315 PS; 311 hp) | 250 kW (340 PS; 335 hp) |
Torque | 325 N⋅m (240 ft⋅lbf) | 520 N⋅m (384 ft⋅lbf) | 312 N⋅m (230 ft⋅lbf) | 410 N⋅m (302 ft⋅lbf) | 480 N⋅m (354 ft⋅lbf) |
Acceleration, 0–100 km/h (62 mph) |
6.4 s | 5.6 s | 7.9 / 8.4 s | 6.5 / 6.7 s | 6.1 / 6.2 s |
Top speed | 250 km/h (155 mph) | over 290 km/h (180 mph) | 235 / 230 km/h (146 / 143 mph) | 268 / 263 km/h (167 / 163 mph) | over 275 / 270 km/h (171 / 168 mph) |
The B10 BiTurbo is a high performance version of the BMW 5 Series E34. Beginning production in 1989, the B10 BiTurbo was based on the 535i and received several upgrades by Alpina, being the fastest production saloon in the world at the time of its introduction, as tested by Road & Track.[71] Production ended in 1994 with 507 examples produced, almost as many as the B10 3.5.
The B10 was built as a sedan and touring based on the BMW E39 from January 1997 to May 2004.[72]
In February 2000, Alpina introduced the Alpina D10 Biturbo, the first six-cylinder diesel model produced by Alpina. The engine, a 3.0 litre twin turbocharged unit with 182 kW (247 PS) and 500 N⋅m (369 lb⋅ft) of torque, was based on the engine of the BMW 530d.[72] It was at the time the most powerful diesel saloon in the world. High-pressure common-rail injection technology (the famous Bosch CP3 high-pressure pump) has revolutionized the diesel industry.
The third generation of the B10 was built with both six-cylinder and V8 engines.
The six-cylinder engines with 3.2 and 3.3 liters displacement were based on the 528i and the 530i.[72] For the 3.3 liter engine the engine block was bored to increase displacement to 3298 cubic centimeters. The cylinder head was machined and a modified crankshaft was added, different pistons and camshafts were also used. A modified intake system enabled a higher rate of air flow, as well as a stainless steel exhaust system (Alpina-Bosal) with metal catalytic converters. The engine control unit was also completely revised, which increased the power to 206 kW (280 PS; 276 hp).[73]
The two V8 engines with 4.6 (B10 V8) and 4.8 liters (B10 V8S) come from the BMW 540i. Again, a larger displacement was achieved by boring the engine block, which, together with other modifications, increased the power to 250 kW (340 PS), then to 255 kW (347 PS) for the 4.6 liter engine,[74] and 276 kW (375 PS) through an increased stroke with the 4.8 liter engine.[75]
The original suspension from the BMW E39 has been reworked for the B10. Changes include modified springs and tuned shock absorbers from Sachs that help lower the car.
Model | Engine | Power | Torque | Years |
---|---|---|---|---|
B10 3.2 | BMW M52 I6 |
191 kW (260 PS; 256 hp) at 5,900 rpm |
330 N⋅m (243 ft⋅lbf) at 4,300 rpm |
8/1997–12/1998 |
B10 3.3 | BMW M52 I6 |
206 kW (280 PS; 276 hp) at 6,200 rpm |
335 N⋅m (247 ft⋅lbf) at 4,500 rpm |
2/1999–10/2003 |
B10 V8 | M62B46 V8 |
250 kW (340 PS; 335 hp) | 470 N⋅m (347 ft⋅lbf) | 1/1997–10/1998 |
B10 V8 | M62TUB46 V8 |
255 kW (347 PS; 342 hp) | 480 N⋅m (354 ft⋅lbf) | 10/1998–9/2002 |
B10 V8S | Alpina F5 V8 |
280 kW (381 PS; 375 hp) | 519 N⋅m (383 ft⋅lbf) | 1/2002–5/2004 |
D10 Biturbo | M57D30 I6 |
180 kW (245 PS; 241 hp) | 500 N⋅m (369 ft⋅lbf) | 4/2000–10/2003 |
The BMW E60 and the 4.4-liter BMW N62 engine from the 545i serve as the basis for the Alpina B5. Compared to the E60, the B5 has larger brakes, a new suspension with Electronic Damper Control, a stainless steel silencing system with polished double tailpipes and the typical Alpina changes to the interior and exterior.
The B5 was made from February 2005 to September 2007 and the B5 S was made from September 2007 to May 2010.
The N62B44's output is increased by means of a centrifugal supercharger. The supercharger is made by the company ASA, and is also called "Turbessor" because it is able to combine the advantages of turbocharger and supercharger. At low speeds, it spontaneously responds as a conventional displacement compressor, but it can also immediately provide the thrust of a turbo. It also reaches speeds of more than 100,000 revolutions per minute. As compared to the 545i performance has increased from 245 kW (333 PS; 329 hp) to 368 kW (500 PS; 493 hp),[76] torque was increased from 450 N⋅m (332 ft⋅lbf) to 700 N⋅m (516 ft⋅lbf).[76] The power is transmitted to the rear wheels by means of a six-speed automatic transmission (6HP 26). As usual with Alpina, this was refined and has "Switch-Tronic".[77]
Alpina B5 | Sedan | Touring |
---|---|---|
Displacement | 4398 cm³ | |
Compression ratio | 9,0:1 | |
Horsepower | 368 kW (500 PS; 493 hp) at 5500–6000 rpm | |
Torque | 700 N⋅m (516 ft⋅lbf) at 4250–4850 rpm | |
Transmission | 6-Speed Automatic "Switch-Tronic" | |
Top speed | 314 km/h (195 mph) | 310 km/h (193 mph) |
Acceleration 0–100 km/h (62 mph) | 4,7 s | 4,8 s |
Empty weight | 1,720 kg (3,792 lb) | 1,810 kg (3,990 lb) |
In 2005, an Alpina B5 Touring was tested by Auto, Motor und Sport on the Nardò Ring. The B5 reached a top speed of 319 km/h (198 mph).[78]
At the 2007 Frankfurt Motor Show (IIA), Alpina presented the revised B5 S. [79]
The motor's combustion process was optimized by changing the camshaft. This resulted in a significantly lower exhaust gas temperature, which is the basis for the performance increase. The power of the 4.4-liter V8 was thus increased by 22 kW (30 PS; 30 hp) to 390 kW (530 PS; 523 hp). The torque increased by 25 N⋅m (18 ft⋅lbf) to 725 N⋅m (535 ft⋅lbf). The B5 S takes the sprint to 100 km/h (62 mph) in 4.6 seconds; The top speed increases to 317 km/h (197 mph).[76]
One innovation is the ZF six-speed Sport-Switch-Tronic transmission. The switching time was reduced by 50% compared to the predecessor. The reaction time is 1/10 s. In manual mode, the driving feeling is similar to the shift dynamics of a dual clutch transmission.
A further feature is the EDC suspension tuning with the company Sachs Race Engineering.
Alpina B5S | Sedan | Touring |
---|---|---|
Displacement | 4398 cm³ | |
Compression ratio | 9,0:1 | |
Horsepower | 390 kW (530 PS; 523 hp) at 5500 rpm | |
Torque | 725 N⋅m (535 ft⋅lbf) at 4750 rpm | |
Transmission | 6-Speed Automatic "Switch-Tronic" | |
Top speed | 317 km/h (197 mph) | 313 km/h (194 mph) |
Acceleration 0–100 km/h (62 mph) | 4,6 s | 4,7 s |
Empty weight | 1,720 kg (3,792 lb) | 1,810 kg (3,990 lb) |
Alpina produced two variants based on the BMW 5 Series (F10), the petrol-engined B5 and diesel-engined D5.
The B5 is based on the 550i and is powered by an Alpina-modified version of the BMW N63 twin-turbo V8 engine. The original B5, which was unveiled at the 2010 Goodwood Festival of Speed, produced 373 kW (507 PS) and 700 N⋅m (516 lb⋅ft). The transmission is an 8-speed automatic.[80]
Alpina unveiled an updated B5 at the 2012 Geneva Motor Show. Power had been uprated to 397 kW (540 PS) and torque to 730 N⋅m (538 lb⋅ft).[81] During 2015, Alpina sold the B5 Bi-Turbo Edition 50, which marked the company's 50th year in operation. The Edition 50 uses an upgraded engine which produces 441 kW (600 PS) and 800 N⋅m (590 lb⋅ft).[82] The standard B5 received this same engine for the B5's last year of production, 2016.[83][84][85]
The D5 Bi-Turbo is based on the 535d. It is powered by Alpina-modified version of the BMW N57 turbo straight-6 engine, which produces 257 kW (349 PS) and 700 N⋅m (516 lb⋅ft) of torque.[85]
The third generation B5 is based on the BMW 5 Series (G30), and is available in both saloon and wagon bodystyles.
Based on the BMW 750i and 750iL, Alpina released the B12 5.7 in 1995 and the B12 6.0 in 1999. In contrast to the cars they are based on, these models are not electronically limited to a top speed of 250 km/h (155 mph), but are able to reach top speeds of more than 280 km/h (174 mph) and 291 km/h (181 mph), respectively.[86] According to Alpina the B12 5.7 was the world's first vehicle with an electrically heated metal catalyst as standard.[87] The B12 5.7 has a 5.7 litre V12 and the B12 6.0 has a 6.0 litre V12.
Model | Engine | Power[86] | Torque | Years[88] | Production[89] |
---|---|---|---|---|---|
B12 5.7 | V12 | 285 kW (387 PS; 382 hp) | 560 N⋅m (413 lb⋅ft) | 12/1995–08/1998 | 202 |
B12 6.0 | V12 | 316 kW (430 PS; 424 hp) | 600 N⋅m (443 lb⋅ft) | 07/1999–07/2001 | 94 |
For the E65 7 Series generation, the Alpina B7 was widely credited with being able to hold its own against top performing offerings from Mercedes (including AMG) such as the S600 and S63 AMG, Audi (particularly quattro's Audi S8), the Bentley Flying Spur, and Jaguar XJ Supercharged, while BMW's own top-of-the-line V12 760Li was considered uncompetitive.[90]
The E65 B7 uses a supercharged version of the 4.4-litre V8 found in the BMW 745i as the 750i and its 4.8-litre engine were not around when development began.[90] The 760Li's naturally aspirated 6.0-litre V12 was deemed too heavy to have a sporty offshoot.[8][91][92] The 2011 Alpina B7, with its twin-turbo 4.4-litre V8 engine and 6-speed automatic transmission, is less expensive and yet faster than its F01 stablemate, the 2010 BMW 760Li powered by a twin-turbo 6.0-litre V12 mated to an 8-speed automatic transmission. The B7's engine, derived from the BMW N63 that is found in the standard BMW lineup, matches the BMW 750i in fuel economy despite increased performance, plus its lighter weight than the 760Li's V12 engine gives the B7 considerably better weight distribution and handling than the 760Li.[1][2]
BMW of North America, LLC offered 800 Alpina B7s as limited edition models for 2007 and 2008, all of which quickly sold out.[93]
The F01 B7 will be offered again for the 2011 model year in the US, with approximately 500 vehicles (half of the annual production of the B7) with a choice of rear-wheel drive or all-wheel drive and/or a standard or long wheelbase (the B7, B7 L (long wheelbase), B7 xDrive (all-wheel drive), and B7 L xDrive), otherwise all configurations have the same equipment.[94][95] Roughly 80 models will be sold in Canada, all of the xDrive variety due to that country's winter weather.[40]
The B7's twin-turbo 4.4-litre V8 is assembled by hand at Alpina's facility in Buchloe, Germany, before being shipped to BMW for installation, and the assembled vehicle is then sent back to Alpina for finishing touches.[1][2] It is based upon BMW's twin-turbo V8 but produces considerable more torque and horsepower, albeit with some turbo lag due to the larger turbos, yet more measured throttle mapping makes the B7 smoother than a stock BMW 750i.[96]
While BMW uses run-flat tires for its 7 Series, the B7 comes with non-reinforced tires with a tire repair kit for emergencies. By using conventional, softer-sidewalled tires, compared to the reinforced sidewalls of run-flats, Alpina engineers were able to stiffen the B7's suspension for better handling and still improve the ride quality over that of a stock BMW 750i.[40]
For the 2013 model year, the Alpina B7 received similar updates to the rest of the 7 Series lineup, including an 8-speed automatic transmission, while its engine adds Valvetronic and now produces 540 hp (403 kW; 547 PS) and 538 lb⋅ft (729 N⋅m), which is good for a 0–100 km/h (62 mph) time of 4.3 seconds and a top speed of 300 km/h (186 mph). Compared to BMW M's version of the 4.4L twin-turbo engine (such as found in the F10 M5), Alpina's engine has 20 hp (15 kW; 20 PS) less but more maximum torque which is also available at a lower rpm.[40]
In a comparison of the 2013 BMW 7 series and the Alpina B7, Motor Trend stated the B7 handled better than the BMW 760iL, but not as well as the 750iL.[97]
The all new 2019 B7 based on the G11/G12 BMW 7 Series and features a 4.4L V8 producing 608 hp (453 kW; 616 PS) and 590 lb⋅ft (800 N⋅m) of torque. The B7 can accelerate from 0-60 mph (97 km/h) in 3.6 seconds and reach a top speed of 205 mph (330 km/h).[98]
The B12 5.0 was built from 1990 to 1994 and is based on the BMW E31 850i. It is powered by an Alpina modified BMW M70 V12 (shared with the E32 B12 5.0) producing 257 kW (349 PS; 345 hp) and mated to an automatic transmission.
The B12 5.7 was available from 1992 and is based on the 850CSi. It is powered by an increased displacement version of the BMW S70 V12 with a modified intake, crankshaft. camshafts and a stainless steel exhaust system as well as a six speed manual gearbox with an optional system called Shift-Tronic that automatically actuates the clutch when shifting and allows the vehicle to creep in traffic,[99] 32 B12 5.7s were equipped with Shift-Tronic.[100] it produced 306 kW (416 PS; 410 hp). The carbon-fibre hood has cooling vents and a NACA duct.
The Alpina B8 Gran Coupé was available in 2021 and is based on the BMW M850i and M8 Gran Coupé's respectively. Powered by an Alpina tuned version of BMW's S63 4.4L V8 Bi-Turbo, the B8 produces 630 PS (463 kW; 621 hp) and 800 N⋅m (590 lbf⋅ft) of torque. Alpina tuned suspension and handling provided drivers with a Comfort+ and Sport+ mode for ideal ride comfort and performance. The exterior sports Alpina Classic 21 inch wheels featuring 20 spokes per wheel, Alpina designed front and rear bumpers, and a choice of Alpina blue or green metallic paint. The interior features Alpina trim appointments, custom Alpina leather upholstery, and or BMW Individual trims and upholstery.[101]
Model | Engine | Power | Torque | Years | Production |
---|---|---|---|---|---|
B12 5.0 | V12 | 257 kW (349 PS; 345 hp) | 470 N⋅m (347 lb⋅ft) | 6/1990-5/1994 | 97 |
B12 5.7 | V12 | 306 kW (416 PS; 410 hp) | 570 N⋅m (420 lb⋅ft) | 11/1992-11/1996 | 57 |
With production of the BMW Z8 completed by November 2002, for 2003 the Z8 production was replaced by the Alpina Roadster V8.[102] The Alpina was a departure from the hard-edged sporting focus of the original car, and elements of the new grand touring intent were evident throughout this final edition.
Instead of the original six-speed manual and 4.9 L (S62) engine featured in Z8's, the Alpina came only as an automatic, using a five-speed BMW Steptronic transmission mated to a 4.8 L Alpina-tuned V8 motor from the Alpina E39 B10 V8 S (Alpina F5). In order to complete the car's transition from sports car to Alpina, relaxed suspension tuning was used. The standard Z8's run-flat tires on 18 in (46 cm) wheels were discarded in favor of conventional tires with softer sidewalls, on 20 in (51 cm) wheels.
A new, softer grade of Nappa leather replaced the Z8's less supple specification, and special Alpina gauges were featured on the dash cluster. An Alpina steering wheel with three solid spokes replaced the original, which could not be retrofitted with shift paddles for the automatic. Gear selection was displayed in an Alpina-specific display mounted in front of the wheel.
Performance of the Alpina V8 differed from that of the standard car in that peak power was reduced to 381 PS (280 kW) while peak torque was raised to 520 N⋅m (384 lb⋅ft); this torque was available at significantly lower rpm than the original in order to enable more relaxed cruising. Curiously, the electronically limited top speed was officially raised to 260 km/h (160 mph), rather than the 250 km/h (160 mph) that most cars are limited to.[102]
Only 555 of these Alpinas were built, 450 of which were exported to the U.S. market and only eight to the UK.[103] In the United States, this special edition of the Z8 was sold directly through BMW dealerships, marking a first for Alpina, whose cars had never been sold through retail channels in the U.S.
Original source: https://en.wikipedia.org/wiki/Alpina.
Read more |