Alvis Car and Engineering Company

Alvis Car and Engineering Company Ltd

Type	Private company
Industry	Automotive industry
Successor	Rover Company
Founded	Coventry, England 1919
Founder	Thomas George John
Defunct	1967
Headquarters	Coventry , England
Number of locations	Production locations: Coventry, England:
Area served	Worldwide
Key people	Thomas George John Chairman and Managing Director, 1919–44 Geoffrey de Freville John Joseph Parkes Chairman and Managing Director, 1946–73 George Thomas Smith-Clarke Chief Engineer and General Manager, 1922–50 William M. Dunn Chief Engineer, Vehicle Division, 1922–59 A. F. Varney Chief Engineer, Aero Engine Division, 1922–72
Products	Automobiles, military vehicles, aircraft engines
Website	www.thealviscarcompany.co.uk
Footnotes / references [1]

Alvis Car and Engineering Company Ltd was a British manufacturing company in Coventry from 1919 to 1967. In addition to automobiles designed for the civilian market, the company also produced racing cars, aircraft engines, armoured cars and other armoured fighting vehicles.

Car manufacturing ended after the company became a subsidiary of Rover in 1965, but armoured vehicle manufacture continued. Alvis became part of British Leyland and then in 1982 was sold to United Scientific Holdings, which renamed itself Alvis plc.

In 2023 it is manufacturing the classic models again.

History of the company

A 1923 12/40 open two-seater

A 1928 12/50 Sportsman's 2-door saloon

A 1928 12/75 Front Wheel Drive
open two-seater T.T. replica

A 1933 Crested Eagle drophead coupé

A 1938 4.3 Litre sports saloon

A 1939 Speed 25 sports saloon

Early history

The original company, T.G. John and Company Ltd., was founded in 1919 by Thomas George John (1880–1946). Its first products were stationary engines, carburetors and motorscooters. Following complaints from the Avro aircraft company whose logo bore similarities to the original winged green triangle, the more familiar inverted red triangle incorporating the word "Alvis" evolved. On 14 December 1921 the company officially changed its name to The Alvis Car and Engineering Company Ltd. Geoffrey de Freville (1883–1965) designed the first Alvis engine and is also responsible for the company name.^[1]

The origin of the name Alvis has been the subject of a great deal of speculation over the years. Some have suggested that de Freville proposed the name Alvis as a compound of the words "aluminium" and "vis" (meaning "strength" in Latin), or perhaps it may have been derived from the Norse mythological weaponsmith, Alvíss. De Freville vigorously rejected all of these theories. In 1921 he specifically stated that the name had no meaning whatsoever, and was chosen simply because it could be easily pronounced in any language. He reaffirmed this position in the early 1960s, stating that any other explanations for the source of the name were purely coincidental.^[1]

Production was relocated to Holyhead Road in Coventry, where from 1922 to 1923 they also made the Buckingham car. In 1922 George Thomas Smith-Clarke (1884–1960) left his job as assistant works manager at Daimler and joined Alvis as chief engineer and works manager. Smith-Clarke was accompanied by William M. Dunn, who left his job as a draughtsman at Daimler to become chief draughtsman at Alvis. This partnership lasted for nearly 28 years and was responsible for producing some of the most successful products in the company's history. Smith-Clarke left in 1950, and Dunn assumed Smith-Clarke's position as chief engineer, remaining in that position until 1959.^[1]

De Freville's first engine design was a four-cylinder engine with aluminium pistons and pressure lubrication, which was unusual for that time. The first car model using de Freville's engine was the Alvis 10/30. It was an instant success and established the reputation for quality workmanship and superior performance for which the company was to become famous. The original 10/30 side-valve engine was improved, becoming by 1923 the overhead valve Alvis 12/50, a highly successful sports car that was produced until 1932. Around 700 of the 12/50 models and 120 of the later Alvis 12/60 models survive today.^{[citation needed]}

1927 saw the introduction of the six-cylinder Alvis 14.75. This engine became the basis for the long line of luxurious six-cylinder Alvis cars produced up to the outbreak of the Second World War. These cars were elegant and full of technical innovations. Independent front suspension and the world's first all-synchromesh gearbox came in 1933 followed by servo assisted brakes. The Alvis 12/75 model was introduced in 1928, a model bristling with innovation, such as front-wheel drive, in-board brakes, overhead camshaft and, as an option, a Roots type supercharger.^{[citation needed]}

As with many upmarket engineering companies of the time, Alvis did not produce their own coachwork, relying instead on the many available coachbuilders in the Midlands area, such as Carbodies, Charlesworth Bodies, Cross & Ellis, Duncan Industries, E. Bertelli Ltd, Holbrook, Grose, Gurney Nutting, Hooper, Lancefield Coachworks, Martin Walter, Mayfair Carriage Co, Mulliners, Tickford, Vanden Plas, Weymann Fabric Bodies, and Arnold of Manchester. Several cars also survive with quite exotic one-off bodywork from other designers.^[2]

In 1936 the company name was shortened to Alvis Ltd, and aircraft engine and armoured vehicle divisions were added to the company by the beginning of the Second World War. Smith-Clarke designed several models during the 1930s and 1940s, including the six-cylinder Speed 20, the Speed 25, and the Alvis 4.3 Litre model.^[1]

Second World War

Car production was initially suspended in September 1939 following the outbreak of war in Europe. It later resumed and production of the 12/70, Crested Eagle, Speed 25, and 4.3 Litre continued well into 1940. The car factory was severely damaged on 14 November 1940 as a result of several bombing raids on Coventry by the German Luftwaffe, although the armaments factory suffered little damage. Much valuable cutting gear and other equipment was lost and car production was suspended for the duration of the war, only resuming during the latter part of 1946. Despite this, Alvis carried out war production on aircraft engines (as sub-contractor of Rolls-Royce Limited) and other aircraft equipment^[1] in its shadow factories.^[3][4]

Post war

1948 Fourteen drophead coupé-cabriolet

Car production resumed with a four-cylinder model, the TA 14, based on the pre-war 12/70. A solid, reliable and attractive car, the TA 14 fitted well the mood of sober austerity in post-war Britain, but much of the magic attaching to the powerful and sporting pre-war models had gone and life was not easy for a specialist car manufacturer. Not only had Alvis lost their car factory but many of the pre-war coachbuilders had not survived either and those that had were quickly acquired by other manufacturers. The post-war history of Alvis was dominated by the quest for reliable and reasonably priced coachwork.^{[citation needed]}

1950s

A 1952 Three Litre sports saloon

A Three Litre TC 21/100 Grey Lady
sports saloon

Smith-Clarke retired in 1950 and Dunn took over as chief engineer. Before retiring Smith-Clarke came up with the Alvis 3L3, TA21 prototype in 1947, TA14 body with a six-cylinder 3-litre engine, after retiring he used the prototype Alvis 3L3 as his personal car. In 1950 a new chassis based on the TA14 and six-cylinder 3–litre engine was announced and this highly successful engine became the basis of all Alvis models until production ceased in 1967.

Saloon bodies for the TA 21, as the new model was called, again came from Mulliners of Birmingham as they had for the TA 14, with Tickford producing the dropheads. With Mulliners committing themselves in October 1954 to supply only Standard Triumph, which purchased Mulliners in 1958,^[5] and Tickford being acquired by David Brown, owner of Aston Martin Lagonda in late 1955, it was becoming clear that new arrangements would have to be made. Some of the most original and beautiful designs on the 3 Litre chassis were being produced by master coachbuilder Carrosserie Herman Graber of Switzerland . These often one-off–designed cars are highly sought after today.

Graber had begun to use TA 14 chassis soon after the war, building three Tropic coupés which were much admired. When the Three Litre chassis was introduced, his bodies displayed at the Geneva Motor Shows in 1951 and 1952 attracted sufficient interest for Graber to set up a standing order of 30 chassis per year. Swiss-built Graber coupés were displayed on the Alvis stand at both Paris and London Motor Shows in October 1955.

With a licence in place, from late 1955 all Alvis bodies became based on Graber designs however few chassis and few bodies were built over the next two years. Around 15 or 16 TC108/Gs were built by Willowbrook Limited of Loughborough and Willowbrook was subsequently taken over by Duple Coachbuilders. Over the same two years Graber built 22 TC 108Gs and complained that if he had received chassis he would have committed himself to buying 20 a year.

Only after late 1958 with the launch of the TD 21 did something resembling full-scale production resume as Rolls-Royce subsidiary Park Ward began to build the new bodies now modified in many small ways. These cars, the TD 21 and its later variants, the TE 21 and finally the TF 21 are well built, attractive and fast cars. However it was clear by the mid-1960s that with a price tag of nearly double that of the mass-produced Jaguar, the end could not be far off.^{[citation needed]}

From 1952 to 1955 Alec Issigonis, the creator of the later Mini, worked for Alvis and designed a new model with a V8 engine which proved too expensive to produce.^{[citation needed]}

1960s

1957 Three Litre TC 108G
fixed head coupé

1967 Three Litre series IV
drophead coupé or cabriolet

Rover took a controlling interest in Alvis in 1965. A Rover-designed mid-engined V8 coupé prototype named the P6BS was rumoured to be the new Alvis model but with the takeover by British Leyland this too was shelved. By the time the TF 21 was launched in 1966, available, like its predecessors in both saloon and drophead form and with either manual or automatic gearbox, the model was beginning to show its age despite a top speed of 127 mph – the fastest Alvis ever produced. With only 109 sold and with political troubles aplenty in the UK car manufacturing business at that time, production ceased in 1967.

In 1968, a management buyout of the car operations was finalised and all the Alvis car design plans, customer records, stock of parts and remaining employees were transferred to Red Triangle,^[6][7] a company founded by ex-employees of Alvis to provide parts and service for their cars.^[8]

1970s to 2004

Main page: Company:Alvis plc

As part of Rover, Alvis Limited was incorporated into British Leyland but was bought by United Scientific Holdings plc in 1981. Subsequently, the company's name was changed to Alvis plc. Alvis plc acquired British truck manufacturer Universal Power Drives in 1994, naming their new subsidiary Alvis Unipower Limited. The trucks were subsequently branded as Alvis-Unipower.

In 1998, Alvis plc acquired the armoured vehicle business of GKN plc, and the main UK manufacturing operation was moved from Coventry to Telford. The site of the Alvis works in Holyhead Road is now an out-of-town shopping complex, but its name, Alvis Retail Park, reflects the heritage of the site. In 2002 Alvis plc purchased Vickers Defence Systems to form the subsidiary Alvis Vickers Ltd, which was in turn purchased by BAE Systems in 2004. BAE Systems ended the use of the Alvis distinctive red triangle trademark.^{[citation needed]}

In 2009, Red Triangle negotiated the legal transfer of the Alvis car trademarks. The following year, the company announced that the 4.3 Litre Short Chassis tourer would once again be available. All Alvis' records remain intact at the company's Kenilworth headquarters along with a large stock of period parts. One of the men to have worked on the last Alvis car produced in 1967 is still retained by Red Triangle in a training capacity.

Built to the original plans, the new car has been named the "Continuation Series", to reflect the 73-year interruption in its production between 1937 and 2010. It differs only in detail from the pre-war examples: for emissions, the engine is governed by an electronic fuel injection system with electronic ignition, brakes are hydraulic rather than cable, the steering column collapsible and the rear light arrangement reconfigured to conform to modern standards.^{[citation needed]}

Revived company

In 2012 Alvis announced it would offer five variants of its cars.^[9] These included both 4.3 litre and 3 litre chassis derivatives. In 2019, a sixth model was released to coincide with the agreement for Meiji Sangyo to be the distributor for Asia.^[10]

In 2021, the firm was featured in the BBC Four documentary Classic British Cars: Made in Coventry^[11] and released its Graber Super Coupe continuation car, with a convertible version due out in 2022.^[12][13]

Alvis automobiles

List of most commercial models, 1920–67

Racing cars

Three British car companies – Alvis, Bentley, and Sunbeam – entered vehicles in local racing events between 1920 and 1930. Alvis and Sunbeam were at that time the only British companies building cars to Grand Prix formula racing specifications. Of these, Alvis was the only company whose racing cars were characterized by front-wheel drive and fully independent suspension.^[28]

Alvis was a pioneer of front-wheel drive vehicles. While J. Walter Christie had designed the first front-wheel drive racing car, which he drove in the 1906 Vanderbilt Cup,^[29] the next notable front-wheel drive race car was the supercharged Alvis 12/50 racing car designed by G. T. Smith-Clarke and W. M. Dunn, which was entered in the 1925 Kop Hill Climb in Princes Risborough in Buckinghamshire on 28 March 1925. Two months later (on Saturday, 30 May 1925), Harry Arminius Miller's Miller 122 front-wheel drive car was entered in the 1925 Indianapolis 500.^[28]

Gallery of racing cars

• 

  1932 Alvis 12/50 Type TJ, rebuilt to resemble a car of the mid-1920s

• 

  1928 Alvis 12/75 Type FD 2 seat front-wheel drive sports car with a 1.5L supercharged engine and Tourist Trophy Race bodywork

• 

  1932 Alvis 12/60 Type TL 2 seat with "beetle-back" type coachwork

• 

  1934 Alvis Silver Eagle Type SF

• 

  1935 Alvis 4.3 Litre

• 

  1936 Alvis Speed 20

• 

  1936 Alvis Speed 25

• 

  1939 Alvis 4.3 Litre

• 

  Alvis 12/70

Alvis aircraft engines

An Alvis Leonides Mk.173 radial engine as fitted to the Bristol Sycamore helicopter. The large cooling fan in front of the cylinders is typical of engines fitted to helicopters.

The initial Alvis aero-engines were licence-built Gnome-Rhone radials. The first aero-engine designed and built by Alvis was the 14-cylinder Alvis Pelides radial in 1936. Development of this and related engines (Pelides Major, Alcides, Alcides Major, Maeonides Major) was stopped with the start of the Second World War with only a handful built.

The Alvis Leonides, a smaller 9-cylinder radial, continued in development during the war and was used after the war in some aircraft and helicopters until production finished in 1966. In 1952, Alvis returned to 14-cylinder radials with a development of the Leonides as the Leonides Major.^[30][31] The Major was used in the Westland Whirlwind helicopter.

Alvis military vehicles

British FV104 Samaritan ambulance and FV432 armoured personnel carrier during the Gulf War

The Hungarian automotive engineer Nicholas Straussler had designed an armoured car (AC1) in 1932, which was built by the Manfred Weiss company under licence in Budapest. When Hungary aligned itself with Germany soon afterwards, Straussler emigrated to England.^[32] Straussler's small new company, Straussler Mechanisations Ltd, lacked the necessary resources and capacity to build the vehicle on a large scale, so Straussler approached Alvis, and Alvis-Straussler Ltd, a short-lived joint venture company, was formed in July 1936.^[32][33]

The prototype vehicle produced, the Alvis Straussler AC2, was built upon the AC1 chassis. The first AC3 – the first operational purpose-built armoured car ever produced^{[citation needed]} – was delivered in 1937 by Alvis-Straussler Ltd, built upon the AC2 prototype.^[32] Twenty-seven vehicles were built: 12 for the Royal Air Force , 3 for the Portuguese Army, and 12 for the Royal Netherlands East Indies Army.^[33] The AC2 was subsequently used as a basis for the 39M Csaba armoured scout car built for the Royal Hungarian Army during the Second World War.

• Alvis-Straussler AC3 armoured car (Alvis-Straussler Ltd., 1937)
• Alvis-Straussler light medium tank (Alvis-Straussler Ltd., 1937)
• Hefty gun tractor (Alvis Mechanisation Ltd., 1937)
• LAC armoured car (Alvis Mechanisation Ltd., 1938)

In 1938 Alvis Mechanisations was formed to take over the obligations of Alvis-Straussler Ltd. In 1938, Alvis produced a prototype armoured light reconnaissance vehicle for comparison trials with other manufacturers. The Alvis Dingo lost out to a design by BSA Cycles but 'Dingo' was adopted as the name for the BSA design; which was built by a BSA subsidiary as the Daimler Dingo.

Post-war, Alvis designed a series of six-wheel drive vehicles. The Saladin (FV601) armoured car and Saracen armoured personnel carrier were first. The Saracen was built as a number of related vehicles including FV604 Regimental Command Vehicle, and FV610 Armoured Command Post. The Salamander was an airfield crash tender. It was subsequently used as a basis for the Stalwart amphibious military truck.^[34] The FV611 model was also built to serve as an armoured ambulance.^[35]

The FV432 tracked armoured personnel carrier and related vehicles was developed in the early 1960s by GKN Sankey and came under Alvis in 1998.

The Combat Vehicle Reconnaissance (Tracked) family of tracked vehicles were designed in the 1960s. The family includes the FV101 Scorpion, FV102 Striker, FV103 Spartan, FV104 Samaritan, FV105 Sultan, FV106 Samson, FV107 Scimitar, FV4333 Stormer, and the Streaker.^[34] The first vehicle of this series was the FV101 Scorpion, which was the first aluminium hull tank ever to be built. The hull and turret are actually fabricated from a welded aluminium-zinc-magnesium alloy. Seventeen Scorpion prototypes were delivered for field testing in February 1969.^[34]

Alvis military vehicles

• 

  Dingo Scout armoured light reconnaissance vehicle. Not adopted by the British Army which chose a design by BSA instead.

• 

  FV601 Saladin armoured car

• 

  FV603 Saracen armoured personnel carrier

• 

  FV652 Salamander airport crash tender at the Royal Air Force Museum London

• 

  Stalwart cross-country amphibious load carrier

• 

  FV101 Scorpion armoured reconnaissance vehicle

• 

  FV102 Striker anti-tank guided missile vehicle

• 

  FV103 Spartan armoured personnel carrier

• 

  FV105 Sultan armoured command vehicle

• 

  FV106 Samson armoured recovery vehicle

• 

  FV107 Scimitar armoured reconnaissance vehicle

• 

  FV4333 Stormer

• 

  Armoured Vehicle Launched Bridge (AVLB), manufactured by Alvis Unipower Limited

• 

  FV721 Fox armoured reconnaissance vehicle

• 

  FV722 Vixen armoured reconnaissance vehicle(Wheeled)

Alvis ownership

More than 20 per cent of all Alvis cars ever manufactured were still in existence in 1989.^[1] The Alvis Owner Club, founded in 1951, is a club for all Alvis car and military vehicle enthusiasts. It has over 1,300 members. It hosts International Weekends annually, where owners from the UK and overseas display their cars.

The Alvis Register is a club with more than 600 members, dedicated to all things related to vintage Alvis motor cars (1920–32). Members can access technical and historical information and share their interest with other Alvis enthusiasts. Most owners retain an eligible car or cars.^[36]

See also

• List of car manufacturers of the United Kingdom
• List of aircraft engine manufacturers

Notes

References

Citations

Bibliography

Further reading

• Clarke, R. M. (1989). Alvis gold portfolio 1919–1967. Brooklands Books. ISBN 978-1-870642-84-2. 
• Culshaw, D. (2003). Alvis three litre in detail: TA21 to TF21 1950–67. Herridge and Sons. ISBN 978-0-9541063-2-4. 
• Padfield, A. (2000). "Captain G T Smith-Clarke: automobile and medical engineer". J Med Biogr 8 (2): 89–96. doi:10.1177/096777200000800205. PMID 10994055. http://www.wyreforest.gov.uk/FastWEB/FastWEB_Upload/2008/Supporting%20Documents/A%202008%200237%201SD.pdf. 

External links

• The Alvis Car Company
• Red Triangle

0.00 (0 votes) Original source: https://en.wikipedia.org/wiki/Alvis Car and Engineering Company. Read more