Sandvik

Sandvik AB

Type	Publicly traded aktiebolag
Industry	Engineering
Founded	1862; 162 years ago (1862)
Founder	Göran Fredrik Göransson
Headquarters	Stockholm, Sweden
Key people	Johan Molin (Chairman of the Board) Stefan Widing (President and CEO)
Products	Equipment and systems for mining, excavation, drilling, rock processing, metal cutting and machining
Revenue	112.332 billion kr[1] (2022)
Operating income	18.592 billion kr[1] (2022)
Net income	11.225 billion kr[1]
Total assets	176.682 billion kr[1] (2022)
Total equity	81.270 billion kr[1] (2022)
Number of employees	40,489[1] (2022)
Website	home.sandvik

Sandvik AB is a Swedish multinational engineering company specializing in products and services for mining, rock excavation, rock drilling, rock processing (crushing and screening), metal cutting and machining. The company was founded in Gävleborg County, Sweden, in 1862. In 2022, it had approximately 40,500 employees and a revenue of 112 billion SEK, with sales in around 150 countries.^[1][2][3]

LH 517 loader from Sandvik

Göran Fredrik Göransson, founder of Sandvik

Ruins of the blast furnace at Edsken, Hofors Municipality, with a half-size replica of a Bessemer converter

LH 514 loader from Sandvik

TH 545i dump truck from Sandvik

"AB Sandvik Hard Materials", wall sculpture on Sandvik's property in Västberga industrial area

History

1800s

The company was founded by Göran Fredrik Göransson, who was an early user of the Bessemer process. In 1857, he acquired rights to use the patented process and initially applied it in a blast furnace at Edsken, Hofors Municipality. There, he became the first user of the process to achieve technically and commercially acceptable results. However, production at sufficient scale was not possible in the initial location. This prompted the foundation, in 1862, of a new company, Högbo Stål & Jernverks AB, in a place that developed into the town of Sandviken.^[4][5][6]

Already in the 1860s, the company was exporting its products. The United Kingdom , Germany , France and Russia were important markets. In 1868, the company was reorganized as Sandvikens Jernverks AB (the Sandviken Ironworks). The Sandvik brand name was first used by the company at the Centennial International Exhibition of 1876 in Philadelphia. The following year, sales to the United States began.^[4][6][7]

In 1889, the company became the first Swedish manufacturer of seamless rolled tubes, and over the following decade, it made substantial investments in methodology development and production facilities for seamless tubes.^[7]

1900–1980

Sandvikens Jernverk was listed on the Stockholm Stock Exchange in 1901.^[6]

In 1907, production of hollow rock drill steels began, and by the 1920s, the company was considered internationally leading in that product area.^[6][8]

In 1914, the company established its first sales subsidiary outside of Sweden, in Birmingham, UK. Further foreign subsidiaries were opened 1919 in the United States, 1923 in France, and 1926 in Canada .^[6]

In the 1920s, the company began melting stainless steel, and in 1924, it started producing its first stainless seamless tubes. In 1932, it acquired a license to use a new method for cold-rolling tubes, called pilgering, and in 1934, it became the first European company to use the method at industrial scale.^[6][7]

In 1937, there were subsidiaries in 37 countries.^[8]

World War II forced the company to reorganize production. Exports were halved, but demand from the Swedish military for grenades prevented a corporate crisis.^[6]

Already before the war, the company had wanted to enter the cemented carbide tool market, but the patent situation was complicated, and it was unable to find a suitable business partner. However, in 1942, it entered into an agreement with the Lumalampan subsidiary of Kooperativa Förbundet. Lumalampan mainly produced tungsten light bulbs but also made tungsten carbide tips for grenades, as well as its own carbide tools for filament wire drawing, and thus possessed the required technology. In the same year, the Sandvik Coromant brand was registered for cemented carbide products, and the company started working on tools for metal cutting and rock drilling. Metal cutting tools were successfully produced beginning in 1943, but it took several more years to develop sufficiently durable rock drilling tools.^[6]

Bessemer steel production was discontinued in Sandviken in 1947. In the same year, the company became the exclusive supplier of cemented carbide rock drill steels to Atlas Diesel (later known as Atlas Copco).^[6]

In the 1950s, the company expanded its cemented carbide production capacity by building factories in new locations. A workshop that was opened in the small town of Gimo in 1951 gradually expanded into a major production facility, and in 1953, a factory was opened in the Västberga district of Stockholm. By then, rock drills had emerged as the most important cemented carbide product area for the company.^[6][9]

In 1967, Sandvikens Jernverk had 40 subsidiaries and sales in 100 countries. The company changed its name to Sandvik AB in 1972.^[6]

In 1979, Sandvik acquired the British company Osprey.^[6]

Steel conveyor belts of various types had been part of the product range since 1902, and in 1980, a conveyor-belt-based system called Rotoform for granulation of liquid chemicals was developed.^[6]

1980–2000

In 1980, profits began to fall, and over the following years, there were personnel reductions, restructuring efforts and divestments. Still, in 1983, the company recorded its first loss in 62 years. In 1984, the organization was made more decentralized.^[6]

In 1989, Sandvik began investing in Eastern Europe.^[6]

In 1994, production at industrial scale of diamond-coated carbide cutting inserts began. In 1996, a new stainless steel called Safurex was developed.^[6]

In 1997, Sandvik acquired a majority of the Swedish company Kanthal AB, which specialized in metallic electrical resistance products and high-temperature ceramic materials. Also, in the same year, Sandvik bought all remaining shares in the Finnish company Tamrock, a manufacturer of mining equipment in which it previously had a minority holding.^[6]

In 1999, Sandvik divested its production of saws and other craft tools.^[6]

2000 to present

In 2001, Sandvik started testing a new system named Automine for automation and remote control of mining equipment in mines in Canada and Sweden.^[6]

In 2002, Sandvik acquired a majority position in the German cutting tool manufacturer Walter AG.^[6]

In 2004, the Kanthal division developed new alloy production methods with high-temperature powder metallurgy.^[6]

In 2009, Sandvik bought the Austrian company Wolfram Bergbau, which was focused on tungsten production, from mining to cemented-carbide powder.^[6]

In 2017, Sandvik divested its Process Systems and Mining Systems operations, both of which were related to conveyor technology.^[10][11]

In 2022, Sandvik bought the Australian mine planning software provider Deswik.^[12]

In August 2022, the business area Sandvik materials technology, which included tubes, strip steel, medical wires and Kanthal-brand heating technology products, was spun off as a separate company, publicly listed at Nasdaq Stockholm. The new company was named Alleima, and its shares were distributed to the shareholders of Sandvik.^[1][2][13]

In August 2023, Sandvik announced it had acquired the Cambridge, Ontario-headquartered software development company, Postability.^[14]

See also

• List of Swedish companies

References

Further reading

• https://www.home.sandvik/en/news-and-media/newslist/news/2012/02/book-release-the-sandvik-journey-the-first-150-years/

0.00 (0 votes) Original source: https://en.wikipedia.org/wiki/Sandvik. Read more