Discard Protocol
From HandWiki - Reading time: 3 min
| Internet protocol suite |
|---|
| Application layer |
| Transport layer |
| Internet layer |
| Link layer |
The Discard Protocol is a service in the Internet Protocol Suite defined in RFC 863. It was designed for testing, debugging, measurement, and host-management purposes.
A host may send data to a host that supports the Discard Protocol on either Transmission Control Protocol (TCP) or User Datagram Protocol (UDP) port number 9. The data sent to the server is simply discarded. No response is returned. For this reason, UDP is usually used, but TCP allows the services to be accessible on session-oriented connections (for example via HTTP proxies or some virtual private network (VPN)).
Inetd implementation
On most Unix-like operating systems a discard server is built into the inetd (or xinetd) daemon. The discard service is usually not enabled by default. It may be enabled by adding the following lines to the file /etc/inetd.conf and reloading the configuration:
discard stream tcp nowait root internal discard dgram udp wait root internal
The Discard Protocol is the TCP/UDP equivalent of the Unix file-system node /dev/null. Such a service is guaranteed to receive what is sent to it and can be used for debugging code requiring a guaranteed reception TCP or UDP payloads.
On various routers, this TCP or UDP port 9 for the Discard Protocol (or port 7 for the Echo Protocol relaying ICMP datagrams) is also used by default as a proxy to relay Wake-on-LAN (WOL) magic packets from the Internet to hosts on the local network in order to wake them up remotely (these hosts must also have their network adapter configured to accept WOL datagrams and the router must have this proxy setting enabled, and possibly also a configuration of forwarding rules in its embedded firewall to open these ports on the Internet side).
See also
External links
 |  |
EncycloReader
is supported by the 
KSF