Hydrocarbon indicator
Topic: Earth
From HandWiki - Reading time: 1 min
Short description: Anomalous seismic attribute due to the presence of a petroleum reservoir
In reflection seismology, a hydrocarbon indicator (HCI) or direct hydrocarbon indicator (DHI) is an anomalous seismic attribute value or pattern that could be explained by the presence of hydrocarbons in an oil or gas reservoir.
DHIs are particularly useful in hydrocarbon exploration for reducing the geological risk of exploration wells. Broadly, geophysicists recognize several types of DHI:
- Bright spots: localized amplitudes of greater magnitude than background amplitude values. Equipment prior to the 1970s had the bright spots obscured due to the automatic gain control.[1]
- Flat spots: nearly horizontal reflectors that cross existing stratigraphy, possibly indicating a hydrocarbon fluid level within an oil or gas reservoir.
- Dim spots: low amplitude anomalies.[2]
- Polarity reversals can occur where the capping rock has a slightly lower seismic velocity than the reservoir and the reflection has its sign reversed.[1]
Some geoscientists regard amplitude versus offset anomalies as a type of direct hydrocarbon indicator. For example, the amplitude of a reflection might increase with the angle of incidence, a possible indicator of natural gas.[1]
References
- ↑ 1.0 1.1 1.2 Sheriff, Robert E.; Geldart, Lloyd P (1995). "10.8". Exploration Seismology (2 ed.). pp. 415–418. ISBN 0521468264.
- ↑ M. Bacon; R. Simm; T. Redshaw (2007). 3-D Seismic Interpretation. Cambridge: Cambridge University Press. ISBN 978-0-521-71066-4.
 |  |
Licensed under CC BY-SA 3.0 | Source: https://handwiki.org/wiki/Earth:Hydrocarbon_indicator10 views | Status: cached on September 23 2024 16:58:27↧ Download this article as ZWI file
EncycloReader
is supported by the 
KSF