Categories
  Encyclosphere.org ENCYCLOREADER
  supported by EncyclosphereKSF

Combined cycle powered railway locomotive

From HandWiki - Reading time: 2 min

Short description: Power plant concept
Combined cycle gas and steam primary movers, with CNG in one tank and water in the other tank, and would be used as a slug behind a diesel electric conventional locomotive.

A combined cycle powered locomotive is a patented idea to use two primary movers, a gas turbine with a steam turbine to gain the efficiency of a combined cycle power plant or a combined gas and steam engine. Steam locomotives were tested in the past but were not ideal for low speeds, and gas turbine locomotives (GTELs) were used by Union Pacific until the 1970s.[1] Combined cycle power uses the heat from the gas turbine to make steam from the water to turn a steam turbine, instead of that heat getting exhausted out and wasted. Engine efficiency for combined cycle can achieve 60% compared to diesel motors' 45% efficiency.[2][3] The gas and steam turbines would turn their separate generators and the steam turbine would have a clutch between it and its generator because steam power is not easily adjustable. Compressed hydrogen would be in one fuel tank, and water would be in another storage tank for the steam, and the Rankine cycle could condense most of the steam back to water to put back into the water tank to repeat the cycle for the steam turbine.[4] Current diesel electric locomotives such as the GE Evolution Series with a cab could still be the lead cab, pusher, and distributed power; with the combined cycle powered locomotive as a slug.

See also

References

External links




Licensed under CC BY-SA 3.0 | Source: https://handwiki.org/wiki/Engineering:Combined_cycle_powered_railway_locomotive
1 | Status: cached on August 14 2024 08:38:21
↧ Download this article as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF