General Motors W platform

W-body
Overview
Manufacturer	General Motors
Also called	GM10
Production	1987–2016
Body and chassis
Class	Mid-size platform Full size platform
Layout	FF layout
Body style(s)	4-door sedan 2-door coupe 2-door convertible
Vehicles	Buick Century Buick LaCrosse Buick Regal Chevrolet Impala Chevrolet Impala Limited Chevrolet Lumina Chevrolet Monte Carlo Oldsmobile Cutlass Supreme Oldsmobile Intrigue Pontiac Grand Prix
Powertrain
Engine(s)	122 I4 Iron Duke I4 Quad-4 I4 60° V6 Shortstar V6 High Value V6 High Feature V6 Buick V6 LS4 V8
Transmission(s)	3-speed 3T40 automatic 4-speed 4T60 automatic 4-speed 4T60-HD automatic 4-speed 4T65 automatic 4-speed 4T60-E automatic 4-speed 4T65-E automatic 4-speed 4T65E-HD automatic 5-speed Getrag 282 manual 5-speed Getrag 284 Manual 6-speed 6T70 automatic
Dimensions
Wheelbase	107.5 in (2,730 mm) 109.0 in (2,769 mm) 110.5 in (2,807 mm)
Chronology
Predecessor	GM G platform (RWD) GM A platform (FWD) GM B platform
Successor	GM Epsilon Wide II LWB platform GM Zeta platform (for Chevrolet SS for FWD Impala SS)

The W-platform (also known as the W-body) was a General Motors automotive platform underpinning both mid size and full-size front-wheel drive cars — across the platform's three generations from 1987-2016.

Code named GM10, the program began development in 1982 under Chairman Roger B. Smith and debuted in 1987 with the Pontiac Grand Prix, Buick Regal, and Oldsmobile Cutlass Supreme coupés — with the four-door sedan body style introduced for 1990.

The 1997–2005 2nd Generation, or W2 Platform, used both a 110.5 in full-size wheelbase as well as a 109 in mid-size wheelbase.

From 2005-2016, the W3 Platform used a 110.5 in, full-size wheelbase in sedan and coupe configurations, including for the Pontiac Grand Prix (2004-2008), Buick LaCrosse/Allure (2005-2009), Chevrolet Impala/Impala Limited (2005-2016) and Chevrolet Monte Carlo (2000-2007) — each with high performance V8 variants.

History

The platform cost $7 billion to develop, with engineering executed by the Chevrolet-Pontiac-Canada (CPC) group; also known as the small car division. The original program was intended to replace all midsize cars produced by Chevrolet, Pontiac, Oldsmobile, and Buick on the G and A platforms. This ultimately did not happen; while the A-platform Chevrolet Celebrity and Pontiac 6000 were quickly discontinued, the A-body Buick Century and Oldsmobile Cutlass Ciera remained in production until 1996.

The plan was for seven GM plants that would each assemble 250,000 of the cars, or 21% of the total U.S. car market.^[1] It was badly executed from the start, but GM's 1984 reorganization, combined with changing market dynamics, wrought havoc with the program and it never recovered. In 2008, prominent shareholder activist Robert A. G. Monks noted that GM had lost $2000 on every car it produced in 1989, the year before the last of the original GM10's were launched.^[2]

1996 Buick Regal with Transverse leaf spring rear suspension

The next iteration of the platform was known as the MS2000 or simply the W2 platform. Early versions used a transversely installed, fiberglass mono-leaf spring combined with struts in the rear. The "generation 1.5" W-body models had updated rear suspensions that used coil springs instead of the transverse leaf spring design inspired by the Chevrolet Corvette. For the 1997 model year the second generation W-body was released with a MacPherson strut coil spring design.

A revised and updated W3 platform was introduced in 2004, rather than a stretched Epsilon platform, as had been planned. Parma Metal Fabricating Division of Parma, Ohio was responsible for metal fabrication and final assembly took place at GM's Oshawa Car Assembly. The transverse use of GM's LS small-block engine in the W-bodies was a major addition for 2005.

The GM W Platform was phased out with the production of the new long-wheelbase Epsilon II platform. The last car produced on the W platform was the ninth generation of the Chevrolet Impala, which was replaced by the Epsilon-based tenth-generation Impala, beginning in model year 2014. GM continued to produce the W-body Impala to fleet customers only under the name Impala Limited until production ended in May 2016.^[3]

Applications

Vehicles using the W-body platform include:

• 1st Gen 107.5 in wheelbase (mid-size)
  • 1988–1996 Buick Regal (2-door coupe, 4-door sedan)
  • 1988–1997 Oldsmobile Cutlass Supreme (2-door coupe, 2-door convertible, 4-door sedan)
  • 1988–1996 Pontiac Grand Prix (2-door coupe, 4-door sedan)
  • 1990–1994 Chevrolet Lumina (2-door coupe, 4-door sedan)
• 1.5 Gen 107.5 in wheelbase (mid-size)
  • 1995–2001 Chevrolet Lumina (4-door sedan)
  • 1995–1999 Chevrolet Monte Carlo (2-door coupe)
• 2nd Gen 109 in wheelbase (mid-size)
  • 1997–2005 Buick Century (4-door sedan)
  • 1997–2004 Buick Regal (4-door sedan)
  • 1998–2002 Oldsmobile Intrigue (4-door sedan)
• 2nd Gen 110.5 in wheelbase (full-size)
  • 1997–2003 Pontiac Grand Prix (2-door coupe, 4-door sedan)
  • 2000–2005 Chevrolet Impala (4-door sedan)
  • 2000–2005 Chevrolet Monte Carlo (2-door coupe)
• 3rd gen 110.5 in wheelbase (full-size)
  • 2004–2008 Pontiac Grand Prix (4-door sedan)
  • 2005–2009 Buick LaCrosse/Allure (4-door sedan)
  • 2006–2016 Chevrolet Impala/Impala Limited^[4][5] (4-door sedan)
  • 2006–2007 Chevrolet Monte Carlo (2-door coupe)

References

0.00 (0 votes) Original source: https://en.wikipedia.org/wiki/General Motors W platform. Read more