Piper PT-1

From HandWiki - Reading time: 2 min

Short description: US two-seat primary training aircraft; 1942


PT-1 Trainer
Piper PT-1.jpg
Role Monoplane trainer
Manufacturer Piper Aircraft
First flight 1942
Number built 1

The Piper PT-1 was a 1940s United States two-seat primary training monoplane designed and built by Piper Aircraft at Lock Haven. A low-wing tandem two-seat monoplane, the PT-1 was the first Piper aircraft to have a low-wing. It had a fabric covering over an all-metal fuselage frame and wooden spar wings and tail unit. The PT-1 had a retractable tailwheel landing gear and was powered by a 130 hp (97 kW) Franklin 6AC-2980D engine. No further aircraft were built. A four-seat development was designed as the Piper PWA-6 which did not go into production either.

Specifications (PT-1)

Data from Jane's all the World's Aircraft 1947[1]

General characteristics

  • Crew: 2
  • Length: 22 ft 8 in (6.9 m)
  • Wingspan: 35 ft 2 in (10.72 m)
  • Height: 6 ft 6 in (1.98 m)
  • Empty weight: 1,325 lb (601 kg)
  • Gross weight: 2,000 lb (907 kg)
  • Powerplant: 1 × Franklin 6AC-298 6-cyl. air-cooled horizontally-opposed piston engine, 130 hp (97 kW)
  • Propellers: 2-bladed fixed pitch wooden airscrew

Performance

  • Maximum speed: 150 mph (240 km/h, 130 kn) plus
  • Cruise speed: 135 mph (217 km/h, 117 kn) plus
  • Landing speed: less than 50 mph (43 kn; 80 km/h)
  • Range: 700 mi (1,100 km, 610 nmi)
  • Service ceiling: 12,400 ft (3,800 m)
  • Rate of climb: 750 ft/min (3.8 m/s) to 1,000 ft/min (300 m/min)

See also

Aircraft of comparable role, configuration and era

References

  1. Bridgman, Leonard, ed (1947). Jane's all the World's Aircraft 1947. London: Sampson Low, Marston & Co. pp. 278c–279c. 

Bibliography




Licensed under CC BY-SA 3.0 | Source: https://handwiki.org/wiki/Engineering:Piper_PT-1
14 views | Status: cached on July 25 2024 07:51:50
↧ Download this article as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF