Sabot (dinghy)
Topic: Engineering
From HandWiki - Reading time: 1 min
 Fully rigged Sabot ready to sail | |
| Development | |
|---|---|
| Design | Plywood; Fiberglass |
| Boat | |
| Crew | 1-2 |
| Hull | |
| Type | Monohull, Pram dinghy |
| Construction | One-Design |
| Hull weight | 95 pounds (43 kg) |
| LOA | 8 feet (2.4 m) |
| Beam | 3 feet 9 inches (1.14 m) |
| Hull appendages | |
| Keel/board type | leeboard |
| Rig | |
| Rig type | Bermuda |
| Sails | |
| Mainsail area | 44.132 square feet (4.1000 m2) |
The Sabot is a sailing dinghy that is sailed and raced singlehandedly usually by young sailors in various parts of the world.
The boat is suitable for amateur production. Early models were usually made from plywood. More recent models have been made from fiberglass. Variations on the design include the daggerboard-equipped El Toro from the Richmond Yacht Club in San Francisco Bay Area, the US Sabot, the "Naples Sabot" from Naples community of Long Beach, California, as well as Australian varieties, such as the Holdfast Trainer.
See also
Related development
- El Toro (dinghy)
- Holdfast Trainer
- Naples Sabot
- US Sabot
- Optimist (dinghy)
References
External links
- Australian National Sabot Council
- RYCT Off The Beach (OTB) Sailing
- Tasmanian Sabot Sailing Association
 |  |
Licensed under CC BY-SA 3.0 | Source: https://handwiki.org/wiki/Engineering:Sabot_(dinghy)10 views | Status: cached on July 27 2024 18:08:13↧ Download this article as ZWI file
EncycloReader
is supported by the 
KSF