Sulzer ZG9

From HandWiki - Reading time: 2 min

Sulzer ZG9 was a pre-World War II opposed-piston two-stroke diesel engine by Sulzer.[1][2] The engine was available with a choice of two, three and four cylinders (2ZG9, 3ZG9, 4ZG9); the two-cylinder version developed 120 bhp. It used a piston scavenge pump. This was mounted vertically above one rocker, driven by a bellcrank from the main rockers. This engine is sometimes cited as an inspiration for the Commer TS3 design.[3]

Specification

Data from [1]

General characteristics

  • Type: Two cylinders, four opposed pistons.
  • Bore: 90 mm
  • Stroke: 120 mm

Performance

  • Power output: 50 PSe / 36,77 kW [4] at 1,500 rpm

See also

References

  1. 1.0 1.1 Chapman, C.W. (1956). Modern High-Speed Oil Engines. I (2nd ed.). Caxton. pp. 222–223. 
  2. Williams, D.S.D.; Millar Smith, J. (1939). The Oil Engine (journal). ed. The Oil Engine Manual. London: Temple Press. pp. 120–121. 
  3. "Rootes-Lister TS3". oldengine.org. http://www.oldengine.org/members/diesel/Rootes-ListerTS3/TS3.htm. 
  4. Abdelfattah, A.I.Ibrahim (1951). Versuche an einem raschlaufenden Zweitakt-Gegenkolben-Dieselmotor (Thesis). ETH Zurich. doi:10.3929/ethz-a-000091415. hdl:20.500.11850/133240.




Licensed under CC BY-SA 3.0 | Source: https://handwiki.org/wiki/Engineering:Sulzer_ZG9
8 views | Status: cached on October 06 2024 04:47:50
↧ Download this article as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF