The Internet Printing Protocol (IPP) is an Internet protocol for communication between client devices (computers, mobile phones, tablets, etc.) and printers (or print servers). It allows client to submit one or more print jobs to the printer or print server and perform tasks such as querying the status of a printer, obtaining the status of print jobs, or canceling individual print jobs. Like all IP-based protocols, IPP can run locally or over the Internet. Unlike other printing protocols, IPP also supports access control, authentication, and encryption, making it a much more capable and secure printing mechanism than older ones.
IPP is the basis of several printer logo certification programs including AirPrint, IPP Everywhere, and Mopria and is supported by over 98% of printers sold today.
IPP began as a proposal by Novell for the creation of an Internet printing protocol project in 1996. The result was a draft written by Novell and Xerox called the Lightweight Document Printing Application (LDPA), derived from ECMA-140: Document Printing Application (DPA). At about the same time, Lexmark publicly proposed something called the HyperText Printing Protocol (HTPP), and both HP and Microsoft had started work on new print services for what became Windows 2000. Each of the companies chose to start a common Internet Printing Protocol project in the Printer Working Group (PWG) and negotiated an IPP birds-of-a-feather (BOF) session with the Application Area Directors in the Internet Engineering Task Force (IETF). The BOF session in December 1996(?) showed sufficient interest in developing a printing protocol, leading to the creation of the IETF Internet Printing Protocol (ipp)[1] working group, which concluded in 2005.
Work on IPP continues in the PWG Internet Printing Protocol workgroup with the publication of 23 candidate standards, 1 new and 3 updated IETF RFCs, and several registration and best practice documents providing extensions to IPP and support for different services including 3D Printing, scanning, facsimile, cloud-based services, and overall system and resource management.
IPP/1.0 was published as a series of experimental documents (RFC 2565,[2] RFC 2566,[3] RFC 2567,[4] RFC 2568,[5] RFC 2569,[6] and RFC 2639[7]) in 1999.
IPP/1.1 followed as a draft standard in 2000 with support documents in 2001, 2003, and 2015 (RFC 2910,[8] RFC 2911,[9] RFC 3196,[10] RFC 3510[11] RFC 7472[12]). IPP/1.1 was updated as a proposed standard in January 2017 (RFC 8010,[13] RFC 8011,[14]) and then adopted as Internet Standard 92 (STD 92,[15]) in June of 2018.
IPP 2.0 was published as a PWG Candidate Standard in 2009 (PWG 5100.10-2009,[16]) and defined two new IPP versions (2.0 for printers and 2.1 for print servers) with additional conformance requirements beyond IPP 1.1. A subsequent Candidate Standard replaced it 2011 defining an additional 2.2 version for production printers (PWG 5100.12-2011,[17]). This specification was updated and approved as a full PWG Standard (PWG 5100.12-2015,[18]) in 2015.
IPP Everywhere was published in 2013 and provides a common baseline for printers to support so-called "driverless" printing from client devices. A corresponding self-certification manual and tool suite was published in 2016 allowing printer manufacturers and print server implementors to certify their solutions against the published specification and be listed on the IPP Everywhere printers page maintained by the PWG.
IPP is implemented using the Hypertext Transfer Protocol (HTTP) and inherits all of the HTTP streaming and security features. For example, authorization can take place via HTTP's Digest access authentication mechanism, GSSAPI, or any other HTTP authentication method.Encryption is provided using the TLS protocol-layer, either in the traditional always-on mode used by HTTPS or using the HTTP Upgrade extension to HTTP (RFC 2817[19]). Public key certificates can be used for authentication with TLS. Streaming is supported using HTTP chunking.
IPP uses the traditional client-server model, with clients sending IPP request messages with the MIME media type "application/ipp" in HTTP POST requests to an IPP printer. IPP request messages consist of key/value pairs using a custom binary encoding followed by an "end of attributes" tag and any document data required for the request. The IPP response is sent back to the client in the HTTP POST response, again using the "application/ipp" MIME media type.
Among other things, IPP allows a client to:
IPP uses TCP with port 631 as its well-known port.
Products using the Internet Printing Protocol include, among others, CUPS which is part of Apple macOS and many BSD and Linux distributions and is the reference implementation for most versions of IPP,[20] Novell iPrint, and Microsoft Windows, starting with MS Windows 2000.[21] Windows XP and Windows Server 2003 offer IPP printing via HTTPS. Windows Vista, Windows 7,[22] Windows Server 2008 and 2008 R2 also support IPP printing over RPC in the "Medium-Low" security zone.