A criticality accident is an accidental uncontrolled nuclear fission chain reaction. It is sometimes referred to as a critical excursion, critical power excursion, or divergent chain reaction. Any such event involves the unintended accumulation or arrangement of a critical mass of fissile material, for example enriched uranium or plutonium. Criticality accidents can release potentially fatal radiation doses if they occur in an unprotected environment.
Under normal circumstances, a critical or supercritical fission reaction (one that is self-sustaining in power or increasing in power) should only occur inside a safely shielded location, such as a reactor core or a suitable test environment. A criticality accident occurs if the same reaction is achieved unintentionally, for example in an unsafe environment or during reactor maintenance.
Though dangerous and frequently lethal to humans within the immediate area, the critical mass formed would not be capable of producing a massive nuclear explosion of the type that fission bombs are designed to produce. This is because all the design features needed to make a nuclear warhead cannot arise by chance. In some cases, the heat released by the chain reaction will cause the fissile (and other nearby) materials to expand. In such cases, the chain reaction can either settle into a low power steady state or may even become either temporarily or permanently shut down (subcritical).
In the history of atomic power development, at least 60 criticality accidents have occurred, including 22 in process environments, outside nuclear reactor cores or experimental assemblies, and 38 in small experimental reactors and other test assemblies. Although process accidents occurring outside reactors are characterized by large releases of radiation, the releases are localized. Nonetheless, fatal radiation exposures have occurred to persons close to these events, resulting in more than 20 fatalities. In a few reactor and critical experiment assembly accidents, the energy released has caused significant mechanical damage or steam explosions.[1]
Criticality occurs when sufficient fissile material (a critical mass) accumulates in a small volume such that each fission, on average, produces a neutron that in turn strikes another fissile atom causing another fission; this causes the chain reaction to become self-sustaining within the mass of material. In other words, in a critical mass the number of neutrons emitted, over time, exactly equals the number of neutrons captured by another nucleus or lost to the environment. If the mass is supercritical, the number of neutrons emitted per unit time exceeds those absorbed or lost, resulting in a cascade of nuclear fissions at increasing rate.
Criticality can be achieved by using metallic uranium or plutonium, liquid solutions, or powder slurries. The chain reaction is influenced by range of parameters noted by the acronyms MAGIC MERV (for mass, absorption, geometry, interaction, concentration, moderation, enrichment, reflection, and volume)[2] and MERMAIDS (for mass, enrichment, reflection, moderation, absorption, interaction, density, and shape).[3] Temperature is also a factor.
Calculations can be performed to determine the conditions needed for a critical state, mass, geometry, concentration etc. Where fissile materials are handled in civil and military installations, specially trained personnel are employed to carry out such calculations, and to ensure that all reasonably practicable measures are used to prevent criticality accidents, during both planned normal operations and any potential process upset conditions that cannot be dismissed on the basis of negligible likelihoods (reasonably foreseeable accidents).
The assembly of a critical mass establishes a nuclear chain reaction, resulting in an exponential rate of change in the neutron population over space and time leading to an increase in neutron flux. This increased flux and attendant fission rate produces radiation that contains both a neutron and gamma ray component and is extremely dangerous to any unprotected nearby life-form. The rate of change of neutron population depends on the neutron generation time, which is characteristic of the neutron population, the state of "criticality", and the fissile medium.
A nuclear fission creates approximately 2.5 neutrons per fission event on average.[4] Hence, to maintain a stable, exactly critical chain reaction, 1.5 neutrons per fission event must either leak from the system or be absorbed without causing further fissions.
For every 1,000 neutrons released by fission, a small number, typically no more than about 7, are delayed neutrons which are emitted from the fission product precursors, called delayed neutron emitters. This delayed neutron fraction, on the order of 0.007 for uranium, is crucial for the control of the neutron chain reaction in reactors. It is called one dollar of reactivity. The lifetime of delayed neutrons ranges from fractions of seconds to almost 100 seconds after fission. The neutrons are usually classified in 6 delayed neutron groups.[4] The average neutron lifetime considering delayed neutrons is approximately 0.1 sec, which makes the chain reaction relatively easy to control over time. The remaining 993 prompt neutrons are released very quickly, approximately 1 μs after the fission event.
In steady-state operation, nuclear reactors operate at exact criticality. When at least one dollar of reactivity is added above the exact critical point (where the neutron production rate balances the rate of neutron losses, from both absorption and leakage) then the chain reaction does not rely on delayed neutrons. In such cases, the neutron population can rapidly increase exponentially, with a very small time constant, known as the prompt neutron lifetime. Thus there is a very large increase in neutron population over a very short time frame. Since each fission event contributes approximately 200 MeV per fission, this results in a very large energy burst as a "prompt-critical spike". This spike can be easily detected by radiation dosimetry instrumentation and "criticality accident alarm system" detectors that are properly deployed.
Criticality accidents are divided into one of two categories:
Excursion types can be classified into four categories depicting the nature of the evolution over time:
The prompt-critical excursion is characterized by a power history with an initial prompt-critical spike as previously noted, which either self-terminates or continues with a tail region that decreases over an extended period of time. The transient critical excursion is characterized by a continuing or repeating spike pattern (sometimes known as "chugging") after the initial prompt-critical excursion. The longest of the 22 process accidents occurred at Hanford Works in 1962 and lasted for 37.5 hours. The 1999 Tokaimura nuclear accident remained critical for about 20 hours, until it was shut down by active intervention. The exponential excursion is characterized by a reactivity of less than one dollar added, where the neutron population rises as an exponential over time, until either feedback effects or intervention reduce the reactivity. The exponential excursion can reach a peak power level, then decrease over time, or reach a steady-state power level, where the critical state is exactly achieved for a "steady-state" excursion.
The steady-state excursion is also a state which the heat generated by fission is balanced by the heat losses to the ambient environment. This excursion has been characterized by the Oklo natural reactor that was naturally produced within uranium deposits in Gabon, Africa about 1.7 billion years ago.
A Los Alamos report (McLaughlin et al.[1]) recorded 60 criticality accidents between 1945 and 1999. These caused 21 deaths: seven in the United States, ten in the Soviet Union, two in Japan, one in Argentina, and one in Yugoslavia. Nine have been due to process accidents, and the others from research reactor accidents. Criticality accidents have occurred in the context of production and testing of fissile material for both nuclear weapons and nuclear reactors.
The table below gives a selection of well documented incidents, including some not included in the report by McLaughlin et al.
Date | Location | Description | Injuries | Fatalities | Refs |
---|---|---|---|---|---|
1944 | Los Alamos | Otto Frisch received a larger than intended dose of radiation when leaning over the original Lady Godiva device for a couple of seconds. He noticed that the red lamps (that normally flickered intermittently when neutrons were being emitted) were 'glowing continuously'. Frisch's body had reflected some neutrons back to the device, increasing its neutron multiplication, and it was only by quickly leaning back and away from the device and removing a couple of the uranium blocks that Frisch escaped harm. Afterwards he said, "If I had hesitated for another two seconds before removing the material ... the dose would have been fatal". On 3 February 1954 and 12 February 1957, accidental criticality excursions occurred causing damage to the device, but fortunately only insignificant exposures to personnel. This original Godiva device was irreparable after the second accident and was replaced by the Godiva II. | 0 | 0 | [5][6] |
4 June 1945 | Los Alamos | Scientist John Bistline was conducting an experiment to determine the effect of surrounding a sub-critical mass of enriched uranium with a water reflector. The experiment unexpectedly became critical when water leaked into the polyethylene box holding the metal. When that happened, the water began to function as a highly effective moderator rather than just a neutron reflector. Three people received non-fatal doses of radiation. | 3 | 0 | [7] |
21 August 1945 | Los Alamos | Scientist Harry Daghlian suffered fatal radiation poisoning and died 25 days later after accidentally dropping a tungsten carbide brick onto a sphere of plutonium, which was later (see next entry) nicknamed the demon core. The brick acted as a neutron reflector, bringing the mass to criticality. This was the first known criticality accident causing a fatality. | 0 | 1 | [8][9] |
21 May 1946 | Los Alamos | Scientist Louis Slotin accidentally irradiated himself during a similar incident (called the "Pajarito accident" at the time) using the same "demon core" sphere of plutonium involved in the Daghlian accident. Slotin surrounded the plutonium sphere with two 9-inch diameter hemispherical cups of the neutron-reflecting material beryllium; one above and one below. He was using a screwdriver to keep the cups slightly apart and the assembly thereby subcritical. When the screwdriver accidentally slipped, the cups closed around the plutonium, sending the assembly supercritical. Slotin quickly disassembled the device, thereby likely saving the lives of seven others nearby; Slotin died of radiation poisoning nine days later. The demon core was melted down and the material was reused in other bomb tests in subsequent years.[10] | 8 | 1 | [11][12] |
16 June 1958 | Oak Ridge, Tennessee | The first recorded uranium-processing–related criticality occurred at the Y-12 Plant. During a routine leak test a fissile solution was unknowingly allowed to collect in a 55-gallon drum. The excursion lasted for approximately 20 minutes and resulted in eight workers receiving significant exposure. There were no fatalities, though five were hospitalized for 44 days. All eight workers eventually returned to work. | 8 | 0 | [13][14] |
15 October 1958 | Vinča Nuclear Institute | A criticality excursion occurred in the heavy water RB reactor at the Boris Kidrič Nuclear Institute in Vinča, Yugoslavia, killing one person and injuring five. The initial survivors received the first bone marrow transplant in Europe. | 5 | 1 | [15][16][17] |
30 December 1958 | Los Alamos | Cecil Kelley, a chemical operator working on plutonium purification, switched on a stirrer on a large mixing tank, which created a vortex in the tank. The plutonium, dissolved in an organic solvent, flowed into the center of the vortex. Due to a procedural error, the mixture contained 3.27 kg of plutonium, which reached criticality for about 200 microseconds. Kelley received 3,900 to 4,900 rad (36.385 to 45.715 Sv) according to later estimates. The other operators reported seeing a bright flash of blue light and found Kelley outside, saying "I'm burning up! I'm burning up!" He died 35 hours later. | 0 | 1 | [18] |
3 January 1961 | SL-1, 40 miles (64 km) west of Idaho Falls | SL-1, a United States Army experimental nuclear power reactor underwent a steam explosion and core disassembly due to improper manual withdrawal of the central control rod, killing its three operators by explosion force and impaling. | 0 | 3 | [19] |
24 July 1964 | Wood River Junction | The facility in Richmond, Rhode Island was designed to recover uranium from scrap material left over from fuel element production. Technician Robert Peabody, intending to add trichloroethene to a tank containing uranium-235 and sodium carbonate to remove organics, added uranium solution instead, producing a criticality excursion. The operator was exposed to a fatal radiation dose of 10,000 rad (100 Gy). Ninety minutes later a second excursion happened when a plant manager returned to the building and turned off the agitator, exposing himself and another administrator to doses of up to 100 rad (1 Gy) without ill effect. The operator involved in the initial exposure died 49 hours after the incident. | 0 | 1 | [20][21][22] |
10 December 1968 | Mayak | The nuclear fuel processing center in central Russia was experimenting with plutonium purification techniques using different solvents for solvent extraction. Some of these solvents carried over to a tank not intended to hold them, and exceeded the fissile safe limit for that tank. Against procedure a shift supervisor ordered two operators to lower the tank inventory and remove the solvent to another vessel. Two operators were using an "unfavorable geometry vessel in an improvised and unapproved operation as a temporary vessel for storing plutonium organic solution"; in other words, the operators were decanting plutonium solutions into the wrong type—more importantly, shape—of container. After most of the solvent solution had been poured out, there was a flash of light and heat. "Startled, the operator dropped the bottle, ran down the stairs, and from the room." After the complex had been evacuated, the shift supervisor and radiation control supervisor re-entered the building. The shift supervisor then deceived the radiation control supervisor and entered the room of the incident; this was followed by the third and largest criticality excursion that irradiated the shift supervisor with a fatal dose of radiation, possibly due to an attempt by the supervisor to pour the solution down a floor drain. | 1 | 1 | [23] |
23 September 1983 | Centro Atomico Constituyentes | An operator at the RA-2 research reactor in Buenos Aires, Argentina, received a fatal radiation dose of 3700 rad (37 Gy) while changing the fuel rod configuration with moderating water in the reactor. Two others were injured. | 2 | 1 | [24][25] |
10 August 1985 | Chazhma Bay, Vladivostok | The reactor tank lid of the nuclear powered Soviet submarine K-431 was being replaced, after it had been refuelled. The lid was laid incorrectly and had to be lifted again with the control rods attached. A beam was supposed to prevent the lid from being lifted too far, but this beam was positioned incorrectly, and the lid with control rods was lifted up too far. At 10:55 AM the starboard reactor became prompt critical, resulting in a criticality excursion of about 5·1018 fissions and a thermal/steam explosion. The explosion expelled the new load of fuel, destroyed the machine enclosures, ruptured the submarine's pressure hull and aft bulkhead, and partially destroyed the fuelling shack, with the shack's roof falling 70 metres away in the water. A fire followed, which was extinguished after 4 hours, after which assessment of the radioactive contamination began. There were ten fatalities and 49 other people suffered radiation injuries, and a large area northwest across the Dunay Peninsula was severely contaminated. | 49 | 10 | [26] |
17 June 1997 | Sarov | Russian Federal Nuclear Center senior researcher Alexandr Zakharov received a fatal dose of 4850 rem in a criticality accident. | 0 | 1 | [27][28][29] |
30 September 1999 | Tōkai | At the Japanese uranium reprocessing facility in Ibaraki Prefecture, technicians working on producing fuel for the Jōyō fast reactor poured a uranyl nitrate solution into a precipitation tank which was not designed to hold a solution of this uranium enrichment, causing an eventual critical mass to be formed, resulting in the death of two workers from severe radiation exposure. | 1 | 2 | [30][31][32] |
The sphere of plutonium surrounded by neutron-reflecting tungsten carbide blocks in a re-enactment of Harry Daghlian's 1945 experiment[33]
A re-creation of the Slotin incident. The plutonium "demon core" (the same as in the Daghlian incident) was inside at the time of the accident, and would not be visible.
Lady Godiva assembly in the scrammed (safe) configuration[34]
Lady Godiva assembly, with damaged supporting rods after the excursion of February 1954. Note the images are of different assemblies.[34]
There was speculation although not confirmed within criticality accident experts, that Fukushima 3 suffered a criticality accident. Based on incomplete information about the 2011 Fukushima I nuclear accidents, Dr. Ferenc Dalnoki-Veress speculates that transient criticalities may have occurred there.[35] Noting that limited, uncontrolled chain reactions might occur at Fukushima I, a spokesman for the International Atomic Energy Agency (IAEA) "emphasized that the nuclear reactors won't explode."[36] By 23 March 2011, neutron beams had already been observed 13 times at the crippled Fukushima nuclear power plant. While a criticality accident was not believed to account for these beams, the beams could indicate nuclear fission is occurring.[37] On 15 April, TEPCO reported that nuclear fuel had melted and fallen to the lower containment sections of three of the Fukushima I reactors, including reactor three. The melted material was not expected to breach one of the lower containers, which could cause a massive radioactivity release. Instead, the melted fuel is thought to have dispersed uniformly across the lower portions of the containers of reactors No. 1, No. 2 and No. 3, making the resumption of the fission process, known as a "recriticality", most unlikely.[38]
It has been observed that many criticality accidents emit a blue flash of light.[39]
The blue glow of a criticality accident results from the fluorescence of the excited ions, atoms and molecules of the surrounding medium falling back to unexcited states.[40] This is also the reason electric sparks in air, including lightning, appear electric blue. The smell of ozone was said to be a sign of high ambient radioactivity by Chernobyl liquidators.
This blue flash or "blue glow" can also be attributed to Cherenkov radiation, if either water is involved in the critical system or when the blue flash is experienced by the human eye.[39] Additionally, if ionizing radiation directly transects the vitreous humor of the eye, Cherenkov radiation can be generated and perceived as a visual blue glow/spark sensation.[41]
It is a coincidence that the color of Cherenkov light and light emitted by ionized air are a very similar blue; their methods of production are different. Cherenkov radiation does occur in air for high-energy particles (such as particle showers from cosmic rays)[42] but not for the lower energy charged particles emitted from nuclear decay.
Some people reported feeling a "heat wave" during a criticality event.[43][44] It is not known whether this may be a psychosomatic reaction to the realization of what has just occurred (i.e. the high probability of inevitable impending death from a fatal radiation dose), or if it is a physical effect of heating (or non-thermal stimulation of heat sensing nerves in the skin) due to radiation emitted by the criticality event.
A review of all of the criticality accidents with eyewitness accounts indicates that the heat waves were only observed when the fluorescent blue glow (the non-Cherenkov light, see above) was also observed. This would suggest a possible relationship between the two, and indeed, one can be potentially identified. In dense air, over 30% of the emission lines from nitrogen and oxygen are in the ultraviolet range, and about 45% are in the infrared range. Only about 25% are in the visible range. Since the skin feels light (visible or otherwise) through its heating of the skin surface, it is possible that this phenomenon can explain the heat wave perceptions.[45] However, this explanation has not been confirmed and may be inconsistent with the intensity of light reported by witnesses compared to the intensity of heat perceived. Further research is hindered by the small amount of data available from the few instances where humans have witnessed these incidents and survived long enough to provide a detailed account of their experiences and observations.
Original source: https://en.wikipedia.org/wiki/Criticality accident.
Read more |