Electroactive polymers

Electroactive Polymers or EAPs are polymers whose shape is modified when a voltage is applied to them. They can be used as actuators or sensors. As actuators, they are characterized by the fact that they can undergo a large amount of deformation while sustaining large forces. Due to the similarities with biological tissues in terms of achievable stress and force, they are often called artificial muscles, and have the potential for application in the field of robotics, where large linear movement is often needed.

EAP can have several configurations, but are generally divided in two principal classes:

• Dielectric EAPs, in which actuation is caused by electrostatic forces between two electrodes which squeeze the polymer. This kind of EAP is characterized by a large actuation voltage (several thousand volts), but very low electrical power consumption. Dielectric EAPs require no power to keep the actuator at a given position. Examples are electrostrictive polymers and dielectric elastomers.
• Ionic EAPs, in which actuation is caused by the displacement of ions inside the polymer. Only a few volts are needed for actuation, but the ionic flow implies a higher electrical power needed for actuation, and energy are needed to keep the actuator at a given position. Examples of ionic EAPS are conductive polymers, ionic polymer-metal composites (IPMCs), and responsive gels. Yet another example is a Bucky gel actuator, which is a polymer-supported layer of polyelectrolyte material consisting of an ionic liquid sandwiched between two electrode layers consisting of a gel of ionic liquid containing single-wall carbon nanotubes. The name refers to bucky balls. ^[1]

See also[edit | edit source]

• Armwrestling Match of EAP Robotic Arm Against Human

References[edit | edit source]

External links[edit | edit source]

• An SPIE article on EAP science and technology
• Artificial Muscle, inc.
• Micromuscle AB.
• Electroactive Polymers as Artificial Muscles.

de:Elektroaktive Polymere

Template:WikiDoc Sources