Encyclosphere.org ENCYCLOREADER
  supported by EncyclosphereKSF

Oxide

From Wikidoc - Reading time: 5 min


An oxide is a chemical compound containing at least one oxygen atom as well as at least one other element. Most of the Earth's crust consists of oxides. Oxides result when elements are oxidized by oxygen in air. Combustion of hydrocarbons affords the two principal oxides of carbon, carbon monoxide and carbon dioxide. Even materials that are considered to be pure elements often contain a coating of oxides. For example, aluminium foil has a thin skin of Al2O3 that protects the foil from further corrosion.

Virtually all elements burn in an atmosphere of oxygen. In the presence of water and oxygen (or simply air), some elements - lithium, sodium, potassium, rubidium, cesium, strontium and barium - react rapidly, even dangerously to give the hydroxides. In part for this reason, alkali and alkaline earth metals are not found in nature in their metallic, i.e., native, form. Cesium is so reactive with oxygen that it is used as a getter in vacuum tubes, and solutions of potassium and sodium, so called NaK are used to deoxygenate and dehydrate some organic solvents. The surface of most metals consist of oxides and hydroxides in the presence of air. A well known example is aluminium foil, which is coated with a thin film of aluminium oxide that passivates the metal, slowing further corrosion. The aluminium oxide layer can be built to greater thickness by the process of electrolytic anodising. Although solid magnesium and aluminium react slowly with oxygen at STP (Standard conditions for temperature and pressure), they, like most metals, will burn in air, generating very high temperatures. As a consequence, finely divided powders of most metals can be dangerously explosive in air.

Oxides, such as iron oxide or rust, Fe2O3, form when oxygen combines with other elements

In dry oxygen iron, readily forms iron(II) oxide, but the formation of the hydrated ferric oxides, Fe2O3-2x(OH)x, that mainly comprise rust, typically requires oxygen and water. The production of free oxygen by photosynthetic bacteria some 3.5 billion years ago precipitated iron out of solution in the oceans as Fe2O3 in the economically-important iron ore hematite.

Due to its electronegativity, oxygen forms chemical bonds with almost all elements to give the corresponding oxides. So-called noble metals (common examples: gold, platinum) resist direct chemical combination with oxygen, and substances like gold(III) oxide must be generated by indirect routes.

Insolubility in water[edit | edit source]

The oxide ion, O2−, is the conjugate base of the hydroxide ion, OH−, and is encountered in ionic solid such as calcium oxide. O2− is unstable in aqueous solution − its affinity for H+ is so great (pKb ~ −22) that it abstracts a proton from a solvent H2O molecule:

O2− + H2O → 2 OH−

Although many anions are stable in aqueous solution, ionic oxides are not. For example, sodium chloride dissolves readily in water to give a solution containing the constituent ions, Na+ and Cl−. Oxides do not behave like this. If an ionic oxide dissolves, the O2− ions become protonated. Although calcium oxide, CaO, is said to "dissolve" in water, the products include hydroxide:

CaO + H2O → Ca2+ + 2 OH-

In fact, no monoatomic dianion is known to dissolve in water - all are so basic that they undergo hydrolysis. Concentrations of oxide ion in water are too low to be detectable with current technology.

Authentic soluble oxides do exist, but they release oxyanions, not O2−. Well known soluble salts of oxyanions include sodium sulfate (Na2SO4), potassium permanganate (KMnO4), and sodium nitrate (NaNO3).

Nomenclature[edit | edit source]

In the 18th century, oxides were named calxes or calces after the calcination process used to produce oxides. Calx was later replaced by oxyd.

Oxides are usually named after the number of oxygen atoms in the oxide. Oxides containing only one oxygen are called oxides or monoxides, those containing two oxygen atoms are dioxides, three oxygen atoms makes it a trioxide, four oxygen atoms are tetroxides, and so on following the Greek numerical prefixes. In the older literature and continuing in industry, oxides are named by contracting the element name with "a." Hence alumina, magnesia, chromia, are, respectively, Al2O3, MgO, Cr2O3.

Two other types of oxide are peroxide, O22−, and superoxide, O2−. In such species, oxygen is assigned higher oxidation states than oxide.

Types of oxides[edit | edit source]

Oxides of more electropositive elements tend to be basic. They are called basic anhydrides; adding water, they may form basic hydroxides. For example, sodium oxide is basic; when hydrated, it forms sodium hydroxide.

Oxides of more electronegative elements tend to be acidic. They are called acid anhydrides; adding water, they form oxoacids. For example, dichlorine heptoxide is acid; perchloric acid is a more hydrated form.

Some oxides can act as both acid and base at different times. They are amphoteric. An example is aluminium oxide. Some oxides do not show behavior as either acid or base.

The oxides of the chemical elements in their highest oxidation state are predictable and the chemical formula can be derived from the number of valence electrons for that element. Even the chemical formula of O4, tetraoxygen, is predictable as a group 16 element. One exception is copper for which the highest oxidation state oxide is copper(II) oxide and not copper(I) oxide. Another exception is fluoride that does not exist as expected as F2O7 but as OF2 with the least electronegative element given priority. [1]. Phosphorus pentoxide, the third exception is not properly represented by the chemical formula P2O5 but by P4O10

List of all known oxides sorted by oxidation state[edit | edit source]

  • Element in +1 oxidation state
  • Element in +3 oxidation state
    • Aluminium oxide (Al2O3)
    • Antimony trioxide (Sb2O3)
    • Arsenic trioxide (As2O3)
    • Bismuth trioxide (Bi2O3)
    • Boron oxide (B2O3)
    • Chromium(III) oxide (Cr2O3)
    • Dinitrogen trioxide (N2O3)
    • Erbium(III) oxide (Er2O3)
    • Gadolinium(III) oxide (Gd2O3)
    • Gallium(III) oxide (Ga2O3)
    • Holmium(III) oxide (Ho2O3)
    • Indium(III) oxide (In2O3)
    • Iron(III) oxide (Fe2O3)
    • Lanthanum(III) oxide (La2O3)
    • Lutetium(III) oxide (Lu2O3)
    • Nickel(III) oxide (Ni2O3)
    • Phosphorus trioxide (P4O6)
    • Promethium(III) oxide (Pm2O3)
    • Rhodium(III) oxide (Rh2O3)
    • Samarium(III) oxide (Sm2O3)
    • Scandium(III) oxide (Sc2O3)
    • Terbium(III) oxide (Tb2O3)
    • Thallium(III) oxide (Tl2O3)
    • Thulium(III) oxide (Tm2O3)
    • Titanium(III) oxide (Ti2O3)
    • Tungsten(III) oxide (W2O3)
    • Vanadium(III) oxide (V2O3)
    • Ytterbium(III) oxide (Yb2O3)
    • Yttrium(III) oxide (Y2O3)

See also[edit | edit source]

References[edit | edit source]

  1. ↑ Fully Exploiting the Potential of the Periodic Table through Pattern Recognition Schultz, Emeric. J. Chem. Educ. 2005 82 1649.

Category:Oxides

Template:WikiDoc Sources ==

ar:أكسيد ast:Óxidu bs:Oksidi bg:Оксид ca:Òxid cs:Oxid da:Oxid de:Oxide et:Oksiidid el:Οξείδιο eo:Oksido gl:Óxido hr:Oksidi it:Ossido he:תחמוצת la:Oxidum lv:Oksīds lt:Oksidas mk:Оксид nl:Oxide no:Oksid nn:Oksid uz:Oksid nds:Oxid qu:Muksi simple:Oxide sk:Oxid sl:Oksid sr:Оксид sh:Oksid fi:Oksidi sv:Oxider th:ออกไซด์ uk:Оксид

Licensed under CC BY-SA 3.0 | Source: https://www.wikidoc.org/index.php/Oxide
14 views | Status: cached on July 18 2024 18:02:59
↧ Download this article as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF