SI prefix

Overview[edit | edit source]

An SI prefix (also known as a metric prefix) is a name or associated symbol that precedes a unit of measure (or its symbol) to form a decimal multiple or submultiple. The abbreviation SI is from the French language name Système International d’Unités (also known as International System of Units). SI prefixes are used to reduce the quantity of zeroes in numerical equivalencies. For example, one-billionth of an ampere (a small electrical current) can be written as 0.000 000 001 ampere. In symbol form, this is written as 0.000 000 001 A. Using an SI prefix, these are equivalent to 1 nanoampere or 1 nA. The SI prefixes are governed by the Bureau International des Poids et Mesures (BIPM, also known as the International Bureau of Weights and Measures) and are the product of four resolutions dating from 1960 to 1991.

List of SI prefixes[edit | edit source]

The twenty SI prefixes are shown in the chart below.

Template:SI prefixes

Usage[edit | edit source]

General use of prefix names and symbols[edit | edit source]

Twenty SI prefixes are available to combine with units of measure. For example, the prefix name kilo denotes a multiple of one thousand, so 1 kilometre equals 1000 metres, 1 kilogram equals 1000 grams, 1 kilowatt equals 1000 watts, and so on. Each SI prefix name has an associated symbol which can be used in combination with the symbols for units of measure. Thus, the “kilo” symbol, k, can be used to produce km, kg, and kW, (kilometre, kilogram, and kilowatt). SI prefixes are internationally recognized and also exist outside the SI (many of them long pre-date SI, going back to the original introduction of the metric system); prefixes may also be used in combination with non-SI units; for example: milligauss (mG), kilofoot (kft) and microinch (µin).

Prohibition of multiple prefixes[edit | edit source]

The kilogram is the only SI base unit that has an SI prefix as part of its unit name and symbol. Because multiple prefixes may not be used (such as microkilogram or µkg), the prefixes are used with the unit gram and its symbol g (e.g. milligram or mg).

SI prefixes with symbols for time and angles[edit | edit source]

Officially endorsed policies of the BIPM and the [American] National Institute of Standards and Technology (NIST) vary slightly with respect to the use of the SI prefixes—both between their respective agencies and from real-world practice. For instance, the NIST advises that “…to avoid confusion, prefix symbols (and prefixes) are not used with the time-related unit symbols (names) min (minute), h (hour), d (day); nor with the angle-related symbols (names) ° (degree), ′ (minute), and ″ (second).” The BIPM’s position on the use of SI prefixes with units of time larger than the second is the same as that of the NIST but their position with regard to angles differs: they state “However astronomers use milliarcsecond, which they denote mas, and microarcsecond, µas, which they use as units for measuring very small angles.”

SI prefixes with °C[edit | edit source]

A similar difference between officially endorsed policy and actual practice exists with regard to the symbol for degree Celsius (°C). The NIST states “Prefix symbols may be used with the unit symbol °C and prefixes may be used with the unit name ‘degree Celsius.’ For example, 12 m°C (12 millidegrees Celsius) is acceptable.” Notwithstanding this official endorsement, the practice of using prefixed forms of “°C” (such as “µ°C”) has not been well-adopted in science and engineering; prefixed forms of the kelvin are usually used instead.

Details[edit | edit source]

Template:Seealso

Examples:

• 5 cm = 5 × 10⁻² m = 5 × 0.01 m = 0.05 m
• 3 MW = 3 × 10⁶ W = 3 × 1 000 000 W = 3 000 000 W

The prefix always takes precedence over any exponentiation; thus "km²" means square kilometre and not kilo–square metre. For example, 3 km² is equal to 3 000 000 m² and not to 3000 m² (nor to 9 000 000 m²). Thus the SI prefixes provide steps of a factor one million instead of one thousand in the case of an exponent 2, of a thousand million in the case of an exponent 3, etc. As a result large numbers may be needed, even if the prefixes are fully used, or intermediate units (like the litre) are introduced.

Prefixes where the exponent is divisible by three are often recommended. Hence "100 m" rather than "1 hm".

The obsolete prefixes such as myrio- and myria- were dropped before SI was adopted in 1960, probably because they did not fit this pattern, no one-letter symbol was available (M, m, and µ already being used; the two-letter symbols mo and ma were used instead) and were rarely used anyway.

The prefix kilo derives from the Greek word χίλια (khilia or chilia) = thousand.

Double prefixes such as those formerly used in micromicrofarads (picofarads), hectokilometres (100 kilometres), and millimicrons or micromillimetres (both nanometres) were also dropped with the introduction of the SI.

Though in principle legal, many combinations of prefixes with quantities are rarely used. In most contexts only a few, i.e. the most common, standard combination are established:

• Mass: hectogram, gram, milligram, microgram, and smaller are common. However, megagram or larger are rarely used; tonnes or scientific notation are used instead. Megagram is sometimes used to disambiguate the (metric) tonne from the various (non-metric) tons.
• Volume in litres: litre, decilitre, centilitre, millilitre, microlitre, and smaller are common. Larger volumes are sometimes denoted in hectolitres; otherwise in cubic metres or cubic kilometres. In Australia, large quantities of water are measured in kilolitres, megalitres and gigalitres.
• Length: kilometre, metre, decimetre, centimetre, millimetre, and smaller are common. The micrometre is often referred to by the non-SI term micron. In some fields such as chemistry, the angstrom (equal to 0.1 nm) competes with the nanometre. The femtometre, used mainly in particle physics, is usually called a fermi. At large scales, megametre, gigametre, and larger are rarely used. Often used are astronomical units, light years, and parsecs; the astronomical unit is mentioned in the SI standards as an accepted non-SI unit.
• Time: second, millisecond, microsecond, and shorter are common. The kilosecond and megasecond also have some use, though for these and longer times one usually uses either scientific notation or minutes, hours, and so on.

^† the United Kingdom, Ireland, Australia and New Zealand previously used the long scale number name conventions, but have now at least partly switched to the short scale usage. In particular, above a million and below a millionth, the same name has different values in the two naming systems, so billion and trillion (for example) have unfortunately become potentially ambiguous terms internationally. Using the SI prefixes can circumvent this problem.

Pronunciation[edit | edit source]

There are two accepted pronunciations for the prefix giga-: Template:IPA and Template:IPA. According to the American writer Self, in the 1920s a German committee member of the International Electrotechnical Commission proposed giga- as a prefix for 10⁹, drawing on a verse by the humorous poet Christian Morgenstern that appeared in the third (1908) edition of Galgenlieder (Gallows Songs). This suggests a hard German g was originally intended as the pronunciation. Self was unable to ascertain at what point the Template:IPA (soft g) pronunciation became accepted, but as of 1995 current practice had returned to Template:IPA (hard g).^{[1] [2]}

When any SI prefix is affixed to a root word, the prefix carries the primary stress, and the root word carries a secondary stress on the same syllable that is stressed when the root word stands alone. For example, the pronunciation and stress of gigabyte is Template:IPA. However, when a word with an SI prefix is also commonly used outside the scientific community, it may adopt other pronunciations that do not follow this rule. For example, kilometre (or in the USA, kilometer) may also be pronounced Template:IPA.

Use outside SI[edit | edit source]

The symbol "K" is often used informally to mean a multiple of (a) thousand, so one may talk of "a 40K salary" (40 000), or the Y2K problem. In these cases an uppercase K is often used, although using an uppercase K is never correct when writing under the rules of the SI. Also, it is often used as a prefix to designate the binary prefix kilo = 2¹⁰ = 1024, although this is now non-standard.

Non-SI units[edit | edit source]

• Prefixes go back to the introduction of the metric system in the 1790s, long before the SI was introduced in 1960. The prefixes (including those introduced after the introduction of SI) are used with any metric units, SI or not (e.g. millidynes).
• SI prefixes rarely appear coupled with imperial units or English units except in some specialised cases (e.g. microinches, kilofeet, kilopound or 'kip').
• They are also used with other specialized units used in particular fields (e.g. megaelectronvolts, gigaparsecs).
• They are also occasionally used with currency units (e.g., gigadollar), mainly by people who are familiar with the prefixes from scientific usage.

Computing[edit | edit source]

The prefixes k and greater are common in computing, where they are applied to information and storage units like the bit and the byte. Since 2¹⁰ = 1024, and 10³ = 1000, this led to the SI prefix letters being used to denote "binary" powers. Although these are incorrect usages according to the SI standards it seems common to apply base 10 prefixes, when relating to computer memory, as follows:

k

= 2¹⁰ = 1 024

M

= 2²⁰ = 1 048 576

G

= 2³⁰ = 1 073 741 824

T

= 2⁴⁰ = 1 099 511 627 776

P

= 2⁵⁰ = 1 125 899 906 842 624

These prefixes, however, usually retain their powers-of-1000 meanings when used to describe either disk storage or rates of data transmission (bit rates): 10 Mbit/s Ethernet runs at 10,000,000 bit/s, not 10,485,760 bit/s. The confusion is compounded by the fact that the units of information (the bit and the byte) are not part of SI, where the bit, byte, octet, baud or symbol rate would rather be given in hertz. Although some use "bit" for the bit and "b" for the byte, "b" is often used for bit and "B" for byte instead. It is recommended by several standards bodies to use bit and B to keep the units very distinct, as in kbit or MiB.Template:Facts French-speakers often use "o" for "octet", today a near synonym for the byte.

Consequently, the International Electrotechnical Commission (IEC) adopted new binary prefixes in 1998, formed from the first syllable of the decimal prefix plus 'bi' (pronounced 'bee'). The symbol is the decimal symbol plus 'i'. So now, one kilobyte (1 kB) equals 1000 bytes, whereas one kibibyte (1 KiB) equals 2¹⁰ = 1024 bytes. Likewise mebi (Mi; 2²⁰), gibi (Gi; 2³⁰), tebi (Ti; 2⁴⁰), pebi (Pi; 2⁵⁰), and exbi (Ei; 2⁶⁰). Although the IEC standard does not mention them, the sequence can be readily extended to zebi (Zi; 2⁷⁰) and yobi (Yi; 2⁸⁰). The practical use of these binary prefixes is growing only very slowly and is largely limited to expert literature. They remain mostly ignored by marketing literature.

Proposed changes[edit | edit source]

Extension[edit | edit source]

Continuing backwards in the alphabet, after zetta and yotta, proposals for the next large number include xenta and xona (among others), the latter as an alteration of the Latin-derived numerical prefix nona-, and the next small number would also start with an ‘x’.^{[citation needed]}

One proposed extension is, after zetta and yotta, xona, weka, vunda, uda, and treda.^[3]

Preserving the rule on abbreviating the prefixes (a Latin capital for the large number and a lower-case letter for the small number), even without consensus on the full name the following prefix symbols could be used without ambiguity: ‘X’, ‘W’, ‘V’, ‘x’, ‘w’, ‘v’. The logically next small prefix symbol, ‘u’, was formerly the accepted substitution for ‘µ’ (now withdrawn), the symbol for “micro”.^[4][5]

Another proposal for xenta/xona is novetta, from the Italian nove.^{[citation needed]} This does not have the convenience of backward alphabetic order. Also, the symbol 'n' is already in use for "nano".

Harmonisation[edit | edit source]

There are also proposals for further harmonisation of the capitalisation. Therefore the symbols for kilo, hecto, and deka would be changed from ‘k’ to ‘K’, from ‘h’ to ‘H’, and from ‘da’ to ‘D’. Likewise some lobby for the removal of prefixes that do not fit the 10^±3n scheme, namely hecto, deka, deci, and centi. The CGPM has postponed its decision on both matters for now.

An unsolved (and maybe unsolvable) issue is the application of prefixes to units with exponents other than ±1. The prefix is always applied before the exponent. This eventually led to the introduction of special units for area and volume without exponents in the original metric system:

• 1 are (a) = 100 m² (10 m × 10 m = 1 dam × 1 dam = 1 dam²)
  • ⇒ 1 ca = 1 m² (1 m × 1 m)
  • ⇒ 1 ha = 10 000 m² (100 m × 100 m = 1 hm × 1 hm = 1 hm²)
• 1 stere (st) = 1 m³
• 1 litre (l or L) = 1 dm³ = 1 mst = 0.001 m³

Of these the litre and the hectare are the most ubiquitous in common use: Litre designations are sometimes used to differentiate a volume of liquid (as opposed to a gas, or solid which are usually designated as cubic volumes). Hectares are widely used as a metric alternative to the acre (approximately 2.5 acres to the hectare).

See also[edit | edit source]

References[edit | edit source]

Template:FOLDOC

External links[edit | edit source]

Standards organisations[edit | edit source]

• The International Bureau of Weights and Measures (BIPM): SI prefixes
• US NIST "Definitions of the SI units: The twenty SI prefixes"
• US NIST "Definitions of the SI units: The binary prefixes"
• International Standard ISO 2955: "Information processing - Representation of SI and other units in Systems with limited Character sets"

Other proposals[edit | edit source]

• Proposal for an extension of the SI-prefix system to even larger and smaller units

ca:Prefixos del SI cs:Předpona soustavy SI da:SI-præfiks de:Vorsätze für Maßeinheiten eo:Prefiksoj de SI et:Ühikute detsimaaleesliited eu:SI aurrizkiak he:תחיליות במערכת היחידות הבינלאומית hi:SI उपसर्ग hr:Predmeci (prefiksi) mjernih jedinica hu:SI-prefixum id:Awalan SI ka:სი თავსართები ko:SI 접두어 mk:SI префикс nl:SI-prefix nn:SI-prefiks no:SI-prefiks sl:Predpone SI sr:СИ префикс sv:SI-prefix uk:Префікси одиниць вимірювання Template:WH Template:WS