The earthquake has been ascribed to slip on a thrust fault trending north–south with a dip of 60° to the east, from geodetic data analysis.[5] It has also been interpreted to result from strike-slip faulting along a steeply-dipping NW-SE trending fault.[4] The isoseismal lines for the earthquake were poorly defined, due to variations both in topography and ground conditions.[1]
The earthquake consisted of more than ten separate sub-events. The sequence began with a few shocks in the first two to three seconds with magnitudes less than 5. These were followed by several shocks approaching magnitude 7 over a period of about a minute. The areal distribution of the individual shocks showed no progression along the fault plane as would be expected with a propagating fracture.[6]
The earthquake triggered many landslides in the epicentral area. The bedrock geology in the area contains rocks of almost all ages from Neoproterozoic through to Quaternary. Landslides were mainly confined to areas that experienced intensities of VII or greater and had slopes of moderate dip (26°–45°). In all but one case, the landslides involved Quaternary material, the exception being a slide that was controlled by bedding planes in a Permianlimestone. Rock avalanches occurred on steeper slopes, particularly affecting jointed and weathered Permian limestone and Triassic sandstone/shale sequences.[7]
An area of about 400,000 square kilometres was affected by the earthquake. 28,000 houses collapsed and a further 38,000 were damaged. Houses with wooden frames in the epicentral area remained undamaged.[8] The number of deaths reported varies from 1,641 to 20,000[2][3] with a further 1,600 injured.
The largest landslide formed a dam up to 30 metres (98 ft) high across the Yangtze River, turning the valley above it into a lake.[8]
^ abUtsu, T. R. (2002), "A List of Deadly Earthquakes in the World: 1500–2000", International Handbook of Earthquake & Engineering Seismology, Part A, Volume 81A (First ed.), Academic Press, p. 708, ISBN978-0124406520