Andal–Sitarampur loop line

From Wikipedia - Reading time: 9 min

Andal–Sitarampur loop line
Overview
StatusOperational
OwnerIndian Railways
LocaleWest Bengal
Termini
Stations10
Service
TypeElectric
SystemBroad gauge
Operator(s)Eastern Railway
History
Opened1864
Technical
Line length41 km (25 mi)
Track gauge5 ft 6 in (1,676 mm) broad gauge
ElectrificationYes
Operating speedup to 100 km/h (62 mph)
Route map

km
Up arrow
0
Andal
LowerRight arrow
Down arrow
8
Sonachara
12
Tapasi
Super Smelters Ltd Sidings
15
Ikra Junction
20
Jamuria
former Ikrah–Churulia–
Rupnarayanpur line
(dismantled)
Barabani–Churulia line
(planned)
27
Barabani
33
Chinchuria
UpperRight arrow
41
Sitarampur
Right arrow
Down arrow
Churulia
Gaurangdi
dismantled connection
to Gaurangdi
53
Rupnarayanpur
Down arrow
km

The Andal–Sitarampur loop line is a railway line connecting Andal & Sitarampur on the Bardhaman–Asansol section of the Howrah–Delhi main line with each other. This 41 kilometres (25 mi) track is under the jurisdiction of Eastern Railway. This track primarily serves the northern coalfield areas of the Paschim Bardhaman district in the Indian state of West Bengal.

History

[edit]

The Ondal-Baboissola Railway was constructed by the Tarkessur Railway Company in 1863 and was opened to traffic on 1864. The lines were worked upon by East Indian Railway Company till 1914 before the Tarkessur Railway Company was acquired by the State in 1915 & incorporated with EIR following which this line became a part of the EIR network. The original line opened from Andal (Ondal) to Tapasi via Baboissola (Babuisol, near Andal) & Mangalpur on 1863. This was further extended to Rupnarayanpur on the Howrah–Delhi main line via Ikrah, Churulia & Gaurangdi on 1894–95.[1]

The Ikrah-Barabani branch line opened on 1894. This further extended to Sitarampur on the Bardhaman–Asansol section in 1902.[1]

The Tapasi-Barabani Chord line was completed between 1908–15 to serve the numerous collieries in the area.[1]

Post independence, the Ikrah-Churulia-Gaurangdi-Rupnarayanpur section suffered heavy losses due to which services were withdrawn by Eastern Railway in 1988. The line was scrapped by iron mafias and a mine was setup by dismantling the tracks in 1995.

Branch lines

[edit]

There are two branch lines in this section. The first is the Tapasi-Barabani Chord section. This primarily serves the coalfields of the Sripur Area & Satgram Area and is used by freight trains, The other is the Ikrah-Churulia-Gaurangdi-Rupnarayanpur section. This track was dismantled. A new line was proposed in the railway budget of 2011 between Barabani & Churulia.[2]

Electrification

[edit]

Electrification of the Andal-Barabani-Sitarampur section was sanctioned in the rail budget for 2011–12, and was completed in 2017.[3][4]

References

[edit]
  1. ^ a b c "Administration Report on Railways 1918 page 54". Retrieved 23 September 2021.
  2. ^ "Speech of Mamata Banerjee introducing the Railway Budget 2011-12 25th February 2011" (PDF). Archived (PDF) from the original on 9 July 2020. Retrieved 23 September 2021.
  3. ^ "Electrification of new rail sections". Press Information Bureau. Retrieved 28 November 2011.
  4. ^ "CAG Report on Railways pg 22" (PDF). Retrieved 23 September 2021.

|


Licensed under CC BY-SA 3.0 | Source: https://en.wikipedia.org/wiki/Andal–Sitarampur_loop_line
9 views |
Download as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF