Earthworks (engineering)

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Earthworks" engineering – news · newspapers · books · scholar · JSTOR (March 2015) (Learn how and when to remove this message)

Earthworks are engineering works created through the processing of parts of the earth's surface involving quantities of soil or unformed rock.

An incomplete list of possible temporary or permanent geotechnical shoring structures that may be designed and utilised as part of earthworks:

• 
  Mechanically stabilized earth
• 
  Grout curtain
• 
  Retaining wall types
• 
  Soil nailing
• 
  Tieback
• 
  Trench shoring
• 
  Caisson
• 
  Dam
• 
  Gabions
• 
  Ground freezing

Excavation may be classified by type of material:^[1]: 13.1

• Topsoil excavation
• Earth excavation
• Rock excavation
• Muck excavation – this usually contains excess water and unsuitable soil
• Unclassified excavation – this is any combination of material types

Excavation may be classified by the purpose:^{[1]: 13.1, 13.2}

Typical earthworks include road construction, railway beds, causeways, dams, levees, canals, and berms. Other common earthworks are land grading to reconfigure the topography of a site, or to stabilize slopes.

In military engineering, earthworks are, more specifically, types of fortifications constructed from soil. Although soil is not very strong, it is cheap enough that huge quantities can be used, generating formidable structures. Examples of older earthwork fortifications include moats, sod walls, motte-and-bailey castles, and hill forts. Modern examples include trenches and berms.

Heavy construction equipment is usually used due to the amounts of material to be moved — up to millions of cubic metres. Earthwork construction was revolutionized by the development of the (Fresno) scraper and other earth-moving machines such as the loader, the dump truck, the grader, the bulldozer, the backhoe, and the dragline excavator.

Engineers need to concern themselves with issues of geotechnical engineering (such as soil density and strength) and with quantity estimation to ensure that soil volumes in the cuts match those of the fills, while minimizing the distance of movement. In the past, these calculations were done by hand using a slide rule and with methods such as Simpson's rule. Earthworks cost is a function of hauled amount x hauled distance. The goal of mass haul planning is to determine these amounts and the goal of mass haul optimization is to minimize either or both.^[2]

Now they can be performed with a computer and specialized software, including optimisation on haul cost and not haul distance (as haul cost is not proportional to haul distance).

Earthwork software is generally a subset of CAD software, in which case it often an add-on to a more general CAD package such as AutoCAD.^[3] In that case, earthwork software is principally used to calculate cut and fill volumes which are then used for producing material and time estimates. Most products offer additional functionality such as the ability to takeoff terrain elevation from plans (using contour lines and spot heights); produce shaded cut and fill maps; produce cross sections and visualize terrain in 3D.^[4] The means by which volumes are calculated in software can differ quite considerably leading to potentially different results with the same input data. Many software products use methods based on triangulated irregular networks (TINS) and triangular prism volume algorithms, however other calculation methods are in use based on rationalizing elevations into high density grids or cross-sections.^[5][6][7]

A few programs are specialised in earthworks transport optimization and planning the construction works.

• Media related to Earthworks at Wikimedia Commons
• Saving Old Dirt: The Preservation of Earthworks at the American Battlefield Trust