Categories
  Encyclosphere.org ENCYCLOREADER
  supported by EncyclosphereKSF

Iris (transponder)

From Wikipedia - Reading time: 2 min

The Iris transponder for deep space communication

The Iris transponder is a small, low power deep-space transponder designed by JPL for use in cubesats.[1][2] It unifies a number of communication functions - receiver, command detector, telemetry modulator, exciters, and control functions - into one 1.2-kg package that occupies about 0.5 U. Iris is designed to handle X band uplink, UHF receive, and both X band and optional Ka band downlink. It is only one third the mass, and lower power, compared to the smallest previous solution, the Small Deep Space Transponder.

Functions

[edit]

The capabilities of Iris include:[1]

  • X-band receiver/downconverter capable of carrier tracking.
  • Command detector unit function.
  • Telemetry modulation function.
  • X-band exciter.
  • A matching X-band power amplifier and low-noise amplifier.
  • X-band ranging.
  • UHF (390-450 MHz) receiver for communication with landers/rovers.
  • Differential one-way ranging (DOR) at X-band.
  • Uplink: TC Space Data Link Protocol - CCSDS 232.0-B-3
  • Downlink: AOS Space Data Link Protocol = CCSDS 732.0-B-3
  • Supports codes Convolutional 7-1/2, Manchester, Bi-Phase, and bypass (NRZ), Reed Solomon (255,223), Turbo codes with rates 1/2, 1/3, and 1/6 (block size 8920 bits)
  • Interface to rest of CubeSat electronics is through Serial Peripheral Interface Bus, with a special hardwired output to reset the CubeSat.

Missions

[edit]

See also

[edit]

References

[edit]
  1. ^ a b "Iris V2.1 CubeSat Deep Space Transponder" (PDF). JPL. 2016.
  2. ^ "Iris Deep Space Transponder for SLS EM-1 CubeSat Missions".

Licensed under CC BY-SA 3.0 | Source: https://en.wikipedia.org/wiki/Iris_(transponder)
9 views |
Download as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF