List of ASTM International standards

This is a list of ASTM International standards. Standard designations usually consist of a letter prefix and a sequentially assigned number. This may optionally be followed by a dash and the last two digits of the year in which the standard was adopted. Prefix letters correspond to the following subjects:

A = Iron and Steel Materials
B = Nonferrous Metal Materials
C = Ceramic, Concrete, and Masonry Materials
D = Miscellaneous Materials
E = Miscellaneous Subjects
F = Materials for Specific Applications
G = Corrosion, Deterioration, and Degradation of Materials

This list may include either current or withdrawn standards. A withdrawn standard has been discontinued by its sponsoring committee. A standard may be withdrawn with or without replacement.

A[edit]

AIIMASTM - BP-01-08 Portable Document Format-Healthcare (PDF) A Best Practices Guide

A1-A999[edit]

A1 - 00(2018) Specification for Carbon Steel Tee Rails
A2 - 02(2020) Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A3 - 01(2019) Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A6/A6M - 19 Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A6/A6M-RU-RU - 19 Стандартные технические условия на прутки, плиты, профили и шпунтовые сваи из катаной конструкционной стали, общие требования
A20/A20M - 20 Specification for General Requirements for Steel Plates for Pressure Vessels
A27/A27M - 20 Specification for Steel Castings, Carbon, for General Application
A29/A29M - 20 Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
A31 - 14(2020) Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A34/A34M - 06(2018) Practice for Sampling and Procurement Testing of Magnetic Materials
A36/A36M - 19 Specification for Carbon Structural Steel
A36/A36M-SP - 19 Especificación de estándar para acero estructural al carbono
A36/A36M-RU-RU - 19 Стандартные технические условия на углеродистую конструкционную сталь
A36/A36M-POR - 19 Especificação padrão para Aço carbono estrutural
A47/A47M - 99(2018)e1 Specification for Ferritic Malleable Iron Castings
A48/A48M - 03(2016) Specification for Gray Iron Castings
A49 - 12(2019) Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A53/A53M - 20 Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A53/A53M-SP - 20 Especificación de estándar para tubo de acero, negro e inmerso en caliente, zincado, soldado y sin costuras
A53/A53M-POR - 20 Especificação padrão para Tubo de aço, preto e imersão a quente, revestido de zinco, soldado e sem emenda
A65 - 07(2013) Specification for Steel Track Spikes
A66 - 07(2013) Specification for Steel Screw Spikes
A67 - 00(2016) Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
A74 - 20 Specification for Cast Iron Soil Pipe and Fittings
A90/A90M - 13(2018) Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A90/A90M-RUS - 13(2018) Стандартный метод определения веса [массы] покрытия на железных и стальных изделиях, покрытых цинком или цинковым сплавом1
A99 - 03(2019) Specification for Ferromanganese
A100 - 07(2018) Specification for Ferrosilicon
A101 - 04(2019) Specification for Ferrochromium
A102 - 04(2019) Specification for Ferrovanadium
A105/A105M - 21 Specification for Carbon Steel Forgings for Piping Applications
A106/A106M - 19a Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A108 - 18 Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A109/A109M - 16(2018) Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A111 - 99a(2020) Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
A116 - 11(2016) Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
A121 - 19 Specification for Metallic-Coated Carbon Steel Barbed Wire
A123/A123M - 17 Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A125 - 96(2018) Specification for Steel Springs, Helical, Heat-Treated
A126 - 04(2019) Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A128/A128M - 19 Specification for Steel Castings, Austenitic Manganese
A131/A131M - 19 Specification for Structural Steel for Ships
A131/A131M-RU-RU - 19 Технические условия на конструкционную сталь для судов
A132 - 04(2019) Specification for Ferromolybdenum
A134/A134M - 19 Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A135/A135M - 20 Specification for Electric-Resistance-Welded Steel Pipe
A139/A139M - 16 Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A143/A143M - 07(2020) Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A144 - 04(2019) Specification for Ferrotungsten
A146 - 04(2019) Specification for Molybdenum Oxide Products
A148/A148M - 20e1 Specification for Steel Castings, High Strength, for Structural Purposes
A153/A153M - 16a Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A159 - 83(2020) Specification for Automotive Gray Iron Castings
A178/A178M - 19 Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179/A179M - 19 Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A179/A179M-RUS - 19 Стандартная спецификация на бесшовные трубы из холоднотянутой низкоуглеродистой стали, предназначенных для трубчатых теплообменников и конденсаторов
A181/A181M - 14(2020) Specification for Carbon Steel Forgings, for General-Purpose Piping
A182/A182M - 20 Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A183 - 14(2020) Specification for Carbon Steel Track Bolts and Nuts
A184/A184M - 19 Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
A184/A184M-SP - 19 Especificación de estándar para mallas de barras de acero corrugadas soldadas para refuerzo del hormigón
A184/A184M-POR - 19 Especificação padrão para Malhas de aço soldadas para reforço de concreto
A192/A192M - 17 Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A193/A193M - 20 Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

(Grade B7 Studs bolts and Grade B16 Studs bolts fall in this category and are used for high temperature, high-pressure environments like petroleum industry.)

A194/A194M - 20a Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A197/A197M - 00(2019) Specification for Cupola Malleable Iron
A203/A203M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A204/A204M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A209/A209M - 03(2017) Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A210/A210M - 19 Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A210/A210M-RU-RU - 19 Стандартные технические условия на бесшовные трубы из среднеуглеродистой стали для котлов и пароперегревателей
A213/A213M - 19a Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A213/A213M-RU-RU - 19a Стандартные технические условия на бесшовные трубы из ферритной и аустенитной легированной стали для котлов, пароперегревателей и теплообменников
A214/A214M - 19 Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A216/A216M - 18 Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A216/A216M-RU-RU - 18 Стандартные технические условия на отливки из углеродистой стали, подходящие для сварки плавлением, для эксплуатации в условиях высоких температур
A217/A217M - 20 Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A220/A220M - 99(2018)e1 Specification for Pearlitic Malleable Iron
A225/A225M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A227/A227M - 17 Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A228/A228M - 18 Specification for Steel Wire, Music Spring Quality
A229/A229M - 18 Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
A230/A230M - 19 Specification for Steel Wire, Carbon Valve Spring Quality
A231/A231M - 18 Specification for Chromium-Vanadium Alloy Steel Spring Wire
A232/A232M - 18 Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A234/A234M - 19 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A239 - 14(2019) Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A240/A240M - 20a Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A242/A242M - 13(2018) Specification for High-Strength Low-Alloy Structural Steel
A242/A242M-SP - 13(2018) Especificación estándar para acero estructural de baja aleación de alta resistencia
A242/A242M-POR - 13(2018) Especificação padrão para Aço estrutural de alta resistência e baixa liga
A242/A242M-RU-RU - 13(2018) Стандартные технические условия на высокопрочную низколегированную конструкционную сталь
A247 - 19 Test Method for Evaluating the Microstructure of Graphite in Iron Castings
A249/A249M - 18a Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A252/A252M - 19 Specification for Welded and Seamless Steel Pipe Piles
A252/A252M-RU-RU - 19 Стандартные технические условия на сварные и бесшовные трубчатые сваи из нержавеющей стали
A254/A254M - 12(2019) Specification for Copper-Brazed Steel Tubing
A255 - 20a Test Methods for Determining Hardenability of Steel

(Includes the Jominy test and a method based on work by M. A. Grossman (the Grossman method).^[1])

A262 - 15 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A262-RUS - 15 Стандартные методики выявления склонности к межкристаллитной коррозии аустенитных нержавеющих сталей
A263 - 12(2019) Specification for Stainless Chromium Steel-Clad Plate
A264 - 12(2019) Specification for Stainless Chromium-Nickel Steel-Clad Plate
A264-RU-RU - 12(2019) Стандартные технические условия на плиты, плакированные нержавеющей хромоникелевой сталью
A265 - 12(2019) Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A265-RU-RU - 12(2019) Стандартные технические условия на стальные плиты, плакированные никелем и сплавом на основе никеля
A266/A266M - 20 Specification for Carbon Steel Forgings for Pressure Vessel Components
A268/A268M - 20 Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A269/A269M - 15a(2019) Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270/A270M - 15(2019) Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
A275/A275M - 18 Practice for Magnetic Particle Examination of Steel Forgings
A276/A276M - 17 Specification for Stainless Steel Bars and Shapes
A276/A276M-RUS - 17 СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НЕРЖАВЕЮЩИХ СОРТОВЫХ И ПРОФИЛЬНЫХ СТАЛЕЙ
A278/A278M - 01(2020) Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F (350 °C)
A283/A283M - 18 Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A283/A283M-RU-RU - 18 Стандартные технические условия на плиты из углеродистой стали с низким и средним пределом прочности при растяжении
A285/A285M - 17 Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A285/A285M-RU-RU - 17 Стандартные технические условия на пластины для сосудов под давлением из углеродистой стали с низким и средним пределом прочности на растяжение
A288 - 18 Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A289/A289M - 97(2018) Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A290/A290M - 16 Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A291/A291M - 19 Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A295/A295M - 14(2020) Specification for High-Carbon Anti-Friction Bearing Steel
A297/A297M - 20 Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A299/A299M - 17 Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A302/A302M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A304 - 20 Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A307 - 14e1 Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
A307-SP - 14e1 Especificación estándar para pernos, espárragos y varilla roscada de acero al carbono de 60 000 PSI de resistencia a la tracción
A311/A311M - 04(2020) Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A312/A312M - 19 Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A312/A312M-RU-RU - 19 Стандартные технические условия на бесшовные, сварные и подвергнутые интенсивной холодной деформации трубы из аустенитной нержавеющей стали
A313/A313M - 18 Specification for Stainless Steel Spring Wire
A314 - 19 Specification for Stainless Steel Billets and Bars for Forging
A319 - 71(2020) Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure-Containing Parts
A320/A320M - 18 Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
A320/A320M-RU-RU - 18 Стандартные технические условия на крепежные изделия из легированной и нержавеющей стали для эксплуатации при низких температурах
A322 - 13(2018)e1 Specification for Steel Bars, Alloy, Standard Grades
A323 - 05(2020) Specification for Ferroboron
A324 - 08(2019) Specification for Ferrotitanium
A327/A327M - 11(2017) Test Methods for Impact Testing of Cast Irons
A328/A328M - 13a(2018) Specification for Steel Sheet Piling
A333/A333M - 18 Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
A333/A333M-RU-RU - 18 Стандартные технические условия на бесшовные и сварные стальные трубы, используемые в условиях низких температур и для других видов применения с требуемой ударной вязкостью
A334/A334M - 04a(2016) Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A334/A334M-RU-RU - 04a(2016) Стандартные технические условия на бесшовные и сварные трубы из углеродистой и легированной стали для эксплуатации при низких температурах
A335/A335M - 19a Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A335/A335M-RU-RU - 19a Стандартные технические условия на бесшовные трубы из ферритной легированной стали для эксплуатации в условиях высоких температур
A336/A336M - 19 Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A338 - 84(2018) Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy-Duty Service at Temperatures Up to 650 °F (345 °C)
A340 - 20 Terminology of Symbols and Definitions Relating to Magnetic Testing
A341/A341M - 16 Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods
A342/A342M - 14 Test Methods for Permeability of Weakly Magnetic Materials
A343/A343M - 14(2019) Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A345 - 19 Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A348/A348M - 05(2015) Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A350/A350M - 18 Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A350/A350M-RU-RU - 18 Стандартные технические условия на поковки из углеродистой и низколегированной стали, требующие проведения испытания на ударную вязкость образца с надрезом для компонентов трубопроводов
A351/A351M - 18e1 Specification for Castings, Austenitic, for Pressure-Containing Parts
A352/A352M - 18a Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A352/A352M-RU-RU - 18a Стандартные технические условия на стальные отливки, ферритные и мартенситные, для находящихся под давлением деталей, подходящих для эксплуатации в условиях пониженных температур
A353/A353M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
A354 - 17e2 Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A355 - 89(2017) Specification for Steel Bars, Alloys, for Nitriding
A356/A356M - 16 Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A358/A358M - 19 Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A363 - 03(2020)e1 Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A367 - 11(2017) Test Methods of Chill Testing of Cast Iron
A368 - 95a(2019) Specification for Stainless Steel Wire Strand
A369/A369M - 18a Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A370 - 20 Test Methods and Definitions for Mechanical Testing of Steel Products
A370-SP - 20 Métodos de prueba estándar y definiciones para pruebas mecánicas de productos de acero
A372/A372M - 20e1 Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A376/A376M - 19 Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
A377 - 18 Index of Specifications for Ductile Iron Pressure Pipe
A380/A380M - 17 Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A380/A380M-RU-RU - 17 Стандартное практическое руководство по очистке, удалению окалины и пассивированию деталей, оборудования и систем из нержавеющей стали
A381/A381M - 18 Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
A384/A384M - 07(2019) Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A385/A385M - 20 Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A387/A387M - 17a Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A388/A388M - 19 Practice for Ultrasonic Examination of Steel Forgings
A388/A388M-RU-RU - 19 Стандартное практическое руководство по ультразвуковой дефектоскопии стальных поковок
A389/A389M - 13(2018) Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A390 - 06(2016) Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A391/A391M - 07(2012) Specification for Grade 80 Alloy Steel Chain
A392 - 11a(2017) Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A394 - 08(2015) Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A395/A395M - 99(2018) Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A400 - 17 Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A401/A401M - 18 Specification for Steel Wire, Chromium-Silicon Alloy
A403/A403M - 20 Specification for Wrought Austenitic Stainless Steel Piping Fittings
A407 - 18 Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A409/A409M - 19 Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A411 - 08(2017) Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A413/A413M - 07(2012) Specification for Carbon Steel Chain
A414/A414M - 14(2019) Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
A416/A416M - 18 Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
A416/A416M-SP - 18 Especificación de estándar para torón de acero de siete alambres, de baja relajación, para hormigón pretensado
A416/A416M-POR - 18 Especificação padrão para Cordoalha de aço de sete fios de baixa relaxação para concreto protendido
A418/A418M - 15(2020) Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A420/A420M - 20 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M - 15 Specification for Stress-Relieved Steel Wire for Prestressed Concrete
A421/A421M-SP - 15 Especificación Normalizada para Alambre de Acero Aliviado Esfuerzos sin Recubrimiento para Concreto Preesforzado
A421/A421M-POR - 15 Especificação padrão para Fio de aço com alívio de tensão para concreto protendido
A423/A423M - 19 Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A424/A424M - 18 Specification for Steel, Sheet, for Porcelain Enameling
A426/A426M - 18 Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A428/A428M - 10(2019) Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A434/A434M - 18 Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A435/A435M - 17 Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A435/A435M-RU-RU - 17 Стандартные технические условия на ультразвуковое испытание стальных плит методом прямого преобразователя
A436 - 84(2020) Specification for Austenitic Gray Iron Castings
A437/A437M - 15 Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
A439/A439M - 18 Specification for Austenitic Ductile Iron Castings
A447/A447M - 11(2016) Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A449 - 14(2020) Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A450/A450M - 18a Specification for General Requirements for Carbon and Low Alloy Steel Tubes
A451/A451M - 20 Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A453/A453M - 17 Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A453/A453M-RU-RU - 17 Стандартные технические условия на болтовое соединение для условий эксплуатации при высоких температурах из материалов с коэффициентами расширения, подобным коэффициенту расширения аустенитной нержавеющей стали
A455/A455M - 12a(2017) Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A456/A456M - 08(2018) Specification for Magnetic Particle Examination of Large Crankshaft Forgings
A459 - 08(2020) Specification for Zinc-Coated Flat Steel Armoring Tape
A460 - 11(2016) Specification for Copper-Clad Steel Wire Strand
A463/A463M - 15(2020)e1 Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A466/A466M - 07(2020) Specification for Weldless Chain
A467/A467M - 20 Specification for Machine and Coil Chain
A469/A469M - 07(2017) Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A470/A470M - 05(2020) Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A471/A471M - 19 Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A472/A472M - 07(2017) Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A473 - 19 Specification for Stainless Steel Forgings
A474 - 03(2017) Specification for Aluminum-Coated Steel Wire Strand
A475 - 03(2020) Specification for Zinc-Coated Steel Wire Strand
A476/A476M - 00(2018) Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A478 - 97(2019) Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479/A479M - 20 Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M - 20a Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A481 - 05(2020) Specification for Chromium Metal
A482/A482M - 11(2016) Specification for Ferrochrome-Silicon
A483/A483M - 10(2020) Specification for Silicomanganese
A484/A484M - 20b Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A485 - 17 Specification for High Hardenability Antifriction Bearing Steel
A487/A487M - 20 Specification for Steel Castings Suitable for Pressure Service
A488/A488M - 18e2 Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A489 - 18e1 Specification for Carbon Steel Eyebolts
A491 - 11(2017) Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A492 - 95(2019) Specification for Stainless Steel Rope Wire
A493 - 16 Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A494/A494M - 18a Specification for Castings, Nickel and Nickel Alloy
A495 - 06(2020) Specification for Calcium-Silicon Alloys
A498/A498M - 17 Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
A499 - 15(2020) Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
A500/A500M - 21 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501/A501M - 14 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A501/A501M-SP - 14 Especificación de estándar para tubos estructurales de acero al carbono sin costura y soldados conformados en caliente
A501/A501M-POR - 14 Especificação padrão para Tubos estruturais de aço carbono soldados e sem emendas, moldados a quente
A502 - 03(2015) Specification for Rivets, Steel, Structural
A503/A503M - 15(2020) Specification for Ultrasonic Examination of Forged Crankshafts
A504/A504M - 18 Specification for Wrought Carbon Steel Wheels
A505 - 16 Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A506 - 16 Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A507 - 16 Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A508/A508M - 18 Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A510/A510M - 20 Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
A511/A511M - 20 Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
A512 - 18 Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A513/A513M - 20a Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A514/A514M - 18e1 Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A515/A515M - 17 Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A516/A516M - 17 Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A516/A516M-RU-RU - 17 Стандартные технические условия на пластины для сосудов под давлением из углеродистой стали для умеренных и низких рабочих температур
A517/A517M - 17 Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A517/A517M-RU-RU - 17 Стандартные технические условия на плиты для сосудов под давлением из высокопрочной закаленной и отпущенной легированной стали
A518/A518M - 99(2018) Specification for Corrosion-Resistant High-Silicon Iron Castings
A519/A519M - 17 Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A522/A522M - 14(2019) Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A523/A523M - 20 Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A524 - 17 Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A529/A529M - 19 Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A529/A529M-RU-RU - 19 Стандартные технические условия на высокопрочную марганцевоуглеродистую сталь конструкционного качества
A530/A530M - 18 Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A530/A530M-RU-RU - 18 Стандартные технические условия на общие требования к специализированным трубам из углеродистой и легированной стали
A531/A531M - 18 Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A532/A532M - 10(2019) Specification for Abrasion-Resistant Cast Irons
A533/A533M - 16 Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A534 - 17 Specification for Carburizing Steels for Anti-Friction Bearings
A536 - 84(2019)e1 Specification for Ductile Iron Castings
A537/A537M - 20 Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A540/A540M - 15 Specification for Alloy-Steel Bolting for Special Applications
A541/A541M - 05(2020) Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A542/A542M - 19 Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A543/A543M - 09(2014) Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A550 - 16 Specification for Ferrocolumbium (Ferroniobium)
A551/A551M - 08(2018) Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
A553/A553M - 17e1 Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel
A554 - 16 Specification for Welded Stainless Steel Mechanical Tubing
A555/A555M - 20 Specification for General Requirements for Stainless Steel Wire and Wire Rods
A556/A556M - 18 Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A560/A560M - 12(2018) Specification for Castings, Chromium-Nickel Alloy
A561 - 08(2020) Practice for Macroetch Testing of Tool Steel Bars
A562/A562M - 10(2015) Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A563M - 07(2013) Specification for Carbon and Alloy Steel Nuts (Metric)
A563 - 15 Specification for Carbon and Alloy Steel Nuts
A563-RU-RU - 15 Стандартные технические условия на гайки из углеродистой и легированной стали
A564/A564M - 19a Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A564/A564M-RU-RU - 19a Стандартные технические условия на горячекатаные и упрочненные старением с холодной отделкой прутки и профили из нержавеющей стали
A565/A565M - 10(2017)e1 Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A568/A568M - 19a Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A571/A571M - 01(2019) Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A572/A572M - 18 Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A572/A572M-SP - 18
A572/A572M-POR - 18 Especificação padrão para Aço estrutural de colúmbio-vanádio de alta resistência e baixa liga
A572/A572M-RU-RU - 18 Стандартные технические условия на высокопрочную низколегированную ниобий-ванадиевую конструкционную сталь
A573/A573M - 20 Specification for Structural Carbon Steel Plates
A574 - 17 Specification for Alloy Steel Socket-Head Cap Screws
A575 - 20 Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576 - 17 Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A577/A577M - 17 Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A577/A577M-RU-RU - 17 Стандартные технические условия на ультразвуковой контроль толстолистовой стали посредством наклонного пучка
A578/A578M - 17 Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
A578/A578M-RUS - 17 Стандартная спецификация на ультразвуковое исследование узконаправленным пучком толстолистового стального проката специального назначения
A579/A579M - 20 Specification for Superstrength Alloy Steel Forgings
A580/A580M - 18 Specification for Stainless Steel Wire
A581/A581M - 95b(2014) Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582/A582M - 12(2017) Specification for Free-Machining Stainless Steel Bars
A586 - 18 Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand
A587 - 96(2019) Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A588/A588M - 19 Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A588/A588M-SP - 19 Especificación de estándar para acero estructural de baja aleación y alta resistencia, de límite de elasticidad mínimo de hasta 50 ksi [345 MPa], con resistencia a la corrosión atmosférica
A588/A588M-POR - 19 Especificação padrão para Aço estrutural de baixa resistência e alta resistência, até 50 ksi [345 MPa] de limite de escoamento mínimo, com resistência à corrosão atmosférica
A589/A589M - 06(2018) Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A592/A592M - 10(2020) Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
A595/A595M - 18 Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A596/A596M - 14 Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A597/A597M - 14(2020) Specification for Cast Tool Steel
A598/A598M - 02(2015) Test Method for Magnetic Properties of Magnetic Amplifier Cores
A599/A599M - 07(2017) Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A600 - 92a(2016) Specification for Tool Steel High Speed
A601/A601M - 10(2020) Specification for Electrolytic Manganese Metal
A602 - 94(2018) Specification for Automotive Malleable Iron Castings
A603 - 19 Specification for Metallic-Coated Steel Structural Wire Rope
A604/A604M - 07(2017) Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A604/A604M-RU-RU - 07(2017) Стандартное практическое руководство по испытаниям макроструктуры травлением стальных прутков и заготовок, полученных переплавом с расходуемым электродом
A606/A606M - 18 Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A608/A608M - 20 Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A609/A609M - 12(2018) Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A609/A609M-RU-RU - 12(2018) Стандартное практическое руководство по ультразвуковому исследованию отливок, углеродистой, низколегированной и мартенситной нержавеющей стали
A610 - 79(2019) Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A612/A612M - 20 Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A615/A615M - 20 Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A615/A615M-SP - 20 Especificación de estándar para barras de acero al carbono lisas y corrugadas para refuerzo del hormigón
A615/A615M-POR - 20 Especificação padrão para Barras de aço carbono deformadas e lisas para reforço de concreto
A618/A618M - 04(2015) Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A623M - 16 Specification for Tin Mill Products, General Requirements [Metric]
A623 - 16 Specification for Tin Mill Products, General Requirements
A624/A624M - 13(2018) Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625/A625M - 13(2018) Specification for Tin Mill Products, Black Plate, Single-Reduced
A626/A626M - 16 Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A627 - 03(2019) Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A630 - 16ae1 Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A632 - 19 Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A633/A633M - 18 Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M - 15 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A635/A635M-RU-RU - 15 Стандартные технические условия на сталь, тонколистовую и полосовую, в рулонах большой толщины, горячекатаную, легированную, углеродистую, конструкционную, высокопрочную низколегированную и высокопрочнуюнизколегированную с улучшенной формуемостью, общие требования
A636 - 08(2018) Specification for Nickel Oxide Sinter
A638/A638M - 20 Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A640 - 97(2019) Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A641/A641M - 19 Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
A641/A641M-RU-RU - 19 Стандартные технические условия на оцинкованную (гальванизированную) проволоку из углеродистой стали
A644 - 17 Terminology Relating to Iron Castings
A645/A645M - 10(2016) Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated
A646/A646M - 17 Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A648 - 18 Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
A649/A649M - 10(2020) Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A650/A650M - 18 Specification for Tin Mill Products, Black Plate, Double Reduced
A653/A653M - 20 Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M - 18 Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A656/A656M-RU-RU - 18 Стандартные технические условия на плиты из горячекатаной высокопрочной низколегированной конструкционной стали с улучшенной формуемостью
A657/A657M - 18 Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A659/A659M - 18 Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A660/A660M - 11(2016) Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A662/A662M - 17 Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A663/A663M - 17 Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A664 - 15 Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A666 - 15 Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A667/A667M - 87(2018) Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A668/A668M - 20a Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A671/A671M - 20 Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A672/A672M - 19 Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A673/A673M - 17 Specification for Sampling Procedure for Impact Testing of Structural Steel
A673/A673M-RUS - 17 Стандартная спецификация на процедуру отбора образцов конструкционной стали для испытаний на ударную вязкость
A674 - 18 Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M - 14(2019) Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A677 - 16 Specification for Nonoriented Electrical Steel Fully Processed Types
A679/A679M - 17 Specification for Steel Wire, High Tensile Strength, Cold Drawn
A681 - 08(2015) Specification for Tool Steels Alloy
A683 - 16 Specification for Nonoriented Electrical Steel, Semiprocessed Types
A684/A684M - 17 Specification for Steel, Strip, High-Carbon, Cold-Rolled
A686 - 92(2016) Specification for Tool Steel, Carbon
A688/A688M - 18 Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
A689 - 97(2018) Specification for Carbon and Alloy Steel Bars for Springs
A690/A690M - 13a(2018) Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
A691/A691M - 19 Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A693 - 16 Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A694/A694M - 16 Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A694/A694M-RUS - 16 Стандартная спецификация на поковки из углеродистой и легированной стали для трубных фитингов, фланцев, клапанов и деталей трубопроводов при обслуживании под высоким давлением
A696 - 17 Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A696-RUS - 17 Стандартная спецификация на горячекатаные или обработанные в холодном состоянии прутки специального назначения из углеродистой стали для компонентов напорных трубопроводов
A697/A697M - 13(2018) Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A698/A698M - 20 Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A700 - 14(2019) Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A701/A701M - 10(2020) Specification for Ferromanganese-Silicon
A702 - 13(2018) Specification for Steel Fence Posts, Hot Wrought
A703/A703M - 20a Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M - 19e1 Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A705/A705M - 20 Specification for Age-Hardening Stainless Steel Forgings
A706/A706M - 16 Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
A706/A706M-SP - 16 Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto
A706/A706M-RUS - 16 СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НА ФАСОННЫЕ И ГЛАДКИЕ АРМАТУРНЫЕ СТЕРЖНИ ИЗ НИЗКОЛЕГИРОВАННОЙ СТАЛИ ДЛЯ ЖЕЛЕЗОБЕТОНА
A706/A706M-POR - 16 Especificação padrão para Barras de aço de baixa liga deformadas e lisas para reforço de concreto
A707/A707M - 19 Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A709/A709M - 18 Specification for Structural Steel for Bridges
A710/A710M - 19 Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel Plates
A711/A711M - 17 Specification for Steel Forging Stock
A712 - 14 Test Method for Electrical Resistivity of Soft Magnetic Alloys
A713 - 04(2017) Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A716 - 18 Specification for Ductile Iron Culvert Pipe
A717/A717M - 12(2018) Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A719/A719M - 14(2019) Test Method for Lamination Factor of Magnetic Materials
A720/A720M - 02(2016)e1 Test Method for Ductility of Nonoriented Electrical Steel
A721/A721M - 02(2016) Test Method for Ductility of Oriented Electrical Steel
A722/A722M - 18 Specification for High-Strength Steel Bars for Prestressed Concrete
A722/A722M-SP - 18
A722/A722M-POR - 18 Especificação padrão para Barras de aço de alta resistência para concreto protendido
A723/A723M - 18a Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A724/A724M - 09(2018) Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
A726 - 18 Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
A727/A727M - 14(2019) Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A729/A729M - 17 Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A732/A732M - 20 Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A733 - 16 Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A736/A736M - 17 Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel
A737/A737M - 17 Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A738/A738M - 19 Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A739 - 90a(2016) Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A740 - 98(2014) Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A741 - 11(2016) Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
A742/A742M - 20 Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A743/A743M - 19 Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M - 20a Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A745/A745M - 20 Practice for Ultrasonic Examination of Austenitic Steel Forgings
A746 - 18 Specification for Ductile Iron Gravity Sewer Pipe
A747/A747M - 18 Specification for Steel Castings, Stainless, Precipitation Hardening
A748/A748M - 87(2018) Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A749/A749M - 14 Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A751 - 20 Test Methods and Practices for Chemical Analysis of Steel Products
A753 - 08(2013) Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A754/A754M - 18 Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M - 18 Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A756 - 17 Specification for Stainless Anti-Friction Bearing Steel
A757/A757M - 15 Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A758/A758M - 14(2019) Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A759 - 10(2016) Specification for Carbon Steel Crane Rails
A760/A760M - 15(2020) Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761/A761M - 18 Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A762/A762M - 19 Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A763 - 15 Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A764 - 07(2017) Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A765/A765M - 07(2017) Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A767/A767M - 19 Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A767/A767M-SP - 19 Especificación de estándar para barras de acero zincadas (galvanizadas) para refuerzo del hormigón
A767/A767M-POR - 19 Especificação padrão para Barras de aço (galvanizado) revestido de zinco para reforço de concreto
A769/A769M - 17 Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
A770/A770M - 03(2018) Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A770/A770M-RU-RU - 03(2018) Стандартные технические условия на испытания стальных плит специального назначения на растяжение в направлении толщины
A772/A772M - 00(2016) Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
A773/A773M - 14 Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
A774/A774M - 14(2019) Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A775/A775M - 19 Specification for Epoxy-Coated Steel Reinforcing Bars
A775/A775M-SP - 19 Especificación de estándar para barras de acero de refuerzo con recubrimiento de epoxi
A775/A775M-POR - 19 Especificação padrão para Vergalhões de aço revestidos com epóxi
A778/A778M - 16 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A778/A778M-RU-RU - 16 Стандартные технические условия на сварные неотожженые трубные изделия из аустенитной нержавеющей стали
A779/A779M - 16 Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
A780/A780M - 20 Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A781/A781M - 20a Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A786/A786M - 15 Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A787/A787M - 20a Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A788/A788M - 19a Specification for Steel Forgings, General Requirements
A789/A789M - 20 Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A790/A790M - 20 Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A792/A792M - 10(2015) Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A793 - 96(2014) Specification for Rolled Floor Plate, Stainless Steel
A794/A794M - 18 Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
A795/A795M - 13(2020) Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A796/A796M - 17a Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A798/A798M - 17 Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A799/A799M - 10(2020) Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A800/A800M - 20 Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite
A801 - 14 Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
A802 - 19 Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A802-RUS - 19 Методика для стальных отливок, стандарты приемки поверхности, визуальный осмотр
A803/A803M - 16 Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
A804/A804M - 04(2015) Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A805/A805M - 09(2016) Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A807/A807M - 19 Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A809 - 08(2017) Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A810 - 01(2019) Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A811 - 15 Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
A813/A813M - 14(2019) Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814/A814M - 15(2019) Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A815/A815M - 20 Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A817 - 12(2017) Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A818 - 06(2016) Specification for Coppered Carbon Steel Wire
A820/A820M - 16 Specification for Steel Fibers for Fiber-Reinforced Concrete
A820/A820M-SP - 16 Especificación estándar para fibras de acero para hormigón reforzado con fibra
A820/A820M-POR - 16 Especificação padrão para Fibras de aço para concreto reforçado com fibra
A821/A821M - 15 Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
A822/A822M - 20 Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A823 - 99(2019) Specification for Statically Cast Permanent Mold Gray Iron Castings
A824 - 01(2017) Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A827/A827M - 14(2018) Specification for Plates, Carbon Steel, for Forging and Similar Applications
A829/A829M - 17 Specification for Alloy Structural Steel Plates
A830/A830M - 18 Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A832/A832M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A833 - 19 Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A834 - 95(2020) Specification for Common Requirements for Iron Castings for General Industrial Use
A835/A835M - 10(2020) Specification for Sizes of Ferroalloys and Alloy Additives
A836/A836M - 14(2020) Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A837/A837M - 17 Specification for Steel Forgings, Alloy, for Carburizing Applications
A838 - 18 Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
A839 - 15 Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications
A841/A841M - 17 Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A842 - 11A(2018)e1 Specification for Compacted Graphite Iron Castings
A844/A844M - 09(2015) Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A847/A847M - 20 Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A848 - 17 Specification for Low-Carbon Magnetic Iron
A849 - 15 Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A853 - 19 Specification for Steel Wire, Carbon, for General Use
A854/A854M - 08(2017) Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A855/A855M - 03(2020) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A856/A856M - 03(2020) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A857/A857M - 19 Specification for Steel Sheet Piling, Cold Formed, Light Gage
A858/A858M - 19 Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A859/A859M - 04(2019)e1 Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A860/A860M - 18 Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
A861 - 04(2017) Specification for High-Silicon Iron Pipe and Fittings
A862/A862M - 98(2020) Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A865/A865M - 06(2017) Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A866 - 18 Specification for Medium Carbon Anti-Friction Bearing Steel
A867 - 19 Specification for Iron-Silicon Relay Steels
A871/A871M - 20 Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A872/A872M - 14 Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A874/A874M - 98(2018)e1 Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A875/A875M - 13 Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A876 - 17e1 Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A877/A877M - 17 Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
A878/A878M - 19 Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A879/A879M - 12(2017) Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A881/A881M - 16a Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
A882/A882M - 20 Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand
A884/A884M - 19e1 Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A884/A884M-SP - 19e1 Especificación de estándar para refuerzo de alambre y alambre electrosoldado de acero recubiertos con epoxi
A884/A884M-POR - 19e1 Especificação padrão para Reforço de fio de aço soldado e fio de aço revestido com zinco
A886/A886M - 17 Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A887 - 20 Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A888 - 20 Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A889/A889M - 14(2020) Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
A890/A890M - 18a Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A891/A891M - 16 Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A892 - 09(2020) Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A893/A893M - 03(2015) Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
A895 - 89(2017) Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A896/A896M - 09(2019) Practice for Conducting Case Studies on Galvanized Structures
A897/A897M - 16 Specification for Austempered Ductile Iron Castings
A898/A898M - 17 Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A899 - 91(2014) Specification for Steel Wire, Epoxy-Coated
A900/A900M - 01(2018) Test Method for Lamination Factor of Amorphous Magnetic Strip
A901 - 19 Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
A902 - 18a Terminology Relating to Metallic Coated Steel Products
A903/A903M - 99(2017) Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A904 - 20 Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
A905 - 19 Specification for Steel Wire, Pressure Vessel Winding
A906/A906M - 02(2016) Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A908 - 03(2019) Specification for Stainless Steel Needle Tubing
A909/A909M - 06(2016) Specification for Steel Forgings, Microalloy, for General Industrial Use
A910/A910M - 18 Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
A911/A911M - 15 Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties
A912/A912M - 11(2019) Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
A913/A913M - 19 Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A914/A914M - 19 Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A915/A915M - 08(2018) Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A917 - 08(2020) Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A918 - 06(2019) Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A920/A920M - 14(2019) Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A921/A921M - 93(2016) Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A922 - 05(2020) Specification for Silicon Metal
A923 - 14 Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A923-RU-RU - 14 Стандартные методы испытаний для обнаружения вредной интерметаллической фазы в двухфазных аустенито-ферритных нержавеющих сталях
A924/A924M - 20 Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A925 - 03(2020) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A927/A927M - 18 Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
A928/A928M - 14 Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A928/A928M-RU-RU - 14 Стандартные технические условия на трубы из нержавеющей аустенитно-ферритной (дуплексной) стали, сваренные методом электрической сварки плавлением с добавлением присадочного металла
A929/A929M - 18 Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A930 - 09(2020) Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A931 - 18 Test Method for Tension Testing of Wire Ropes and Strand
A932/A932M - 01(2019) Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
A934/A934M - 19 Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A934/A934M-SP - 19 Especificación de estándar para barras de acero de refuerzo prefabricadas y con recubrimiento de epoxi
A934/A934M-POR - 19 Especificação padrão para Vergalhões de aço pré-fabricados revestidos com epóxi
A937/A937M - 12(2019) Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A938 - 18 Test Method for Torsion Testing of Wire
A939/A939M - 15(2020) Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A941 - 18 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A942/A942M - 95(2018) Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
A943/A943M - 01(2019) Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A944 - 10(2015) Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A945/A945M - 16 Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A947M - 16 Specification for Textured Stainless Steel Sheet [Metric]
A949/A949M - 01(2019) Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A950/A950M - 11(2015) Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A951/A951M - 16e1 Specification for Steel Wire for Masonry Joint Reinforcement
A952/A952M - 02(2016) Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A955/A955M - 20c Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
A955/A955M-POR - 20c Especificação padrão para Barras de aço inoxidável deformadas e planas para reforço de concreto
A956/A956M - 17a Test Method for Leeb Hardness Testing of Steel Products
A956/A956M-RU-RU - 17a Стандартный метод испытания для определения твердости по Либу стальных изделий
A957/A957M - 20 Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958/A958M - 17 Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A959 - 19 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A960/A960M - 20 Specification for Common Requirements for Wrought Steel Piping Fittings
A961/A961M - 20 Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A962/A962M - 19 Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
A964/A964M - 17 Specification for Corrugated Steel Box Culverts
A965/A965M - 20 Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A966/A966M - 15(2020) Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A967/A967M - 17 Specification for Chemical Passivation Treatments for Stainless Steel Parts
A970/A970M - 18 Specification for Headed Steel Bars for Concrete Reinforcement
A970/A970M-SP - 18 Especificación estándar para barras de acero con cabeza para refuerzo del hormigón
A970/A970M-POR - 18 Especificação padrão para Barras de aço com cabeça para reforço de concreto
A970/A970M-RU-RU - 18 Стандартные технические условия на стальные прутки с головкой для армирования бетона
A971/A971M - 17 Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
A972/A972M - 00(2015) Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A973/A973M - 21 Specification for Grade 100 Alloy Steel Chain
A974 - 97(2016) Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
A975 - 20 Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A976 - 18 Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
A977/A977M - 07(2020) Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
A979/A979M - 03(2019) Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A980/A980M - 19 Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A981/A981M - 11(2016) Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
A981/A981M-RU-RU - 11(2016) Стандартный метод испытания для оценки прочности сцепления стальных, предварительно напрягаемых арматурных прядей диаметром 0,600 дюйма [15,24 мм], Марки 270 [1860], без покрытия, применяемых в предварительно напряженных анкерах, закапываемых в землю
A982/A982M - 10(2020) Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A983/A983M - 06(2016) Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A985/A985M - 20 Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A986/A986M - 01(2016) Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A987/A987M - 19 Practice for Measuring Shape Characteristics of Tin Mill Products
A988/A988M - 17 Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A988/A988M-RU-RU - 17 Стандартные технические условия на фланцы, фитинги, трубопроводную арматуру и детали из нержавеющей стали, полученные методом горячего изостатического прессования для эксплуатации при высоких температурах
A989/A989M - 18 Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A990/A990M - 20 Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service
A991/A991M - 17 Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A992/A992M - 20 Specification for Structural Steel Shapes
A992/A992M-SP - 20 Especificación de estándar para perfiles estructurales de acero
A992/A992M-POR - 20 Especificação padrão para Perfis estruturais de aço
A994 - 18 Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A995/A995M - 20 Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A996/A996M - 16 Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A996/A996M-SP - 16 Especificación de estándar para barras corrugadas de acero de rieles y ejes de ferrocarril para refuerzo del hormigón
A996/A996M-POR - 16 Especificação padrão para Barras deformadas em aço ferroviário e aço de eixo para reforço de concreto
A997 - 08(2018) Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A998/A998M - 18 Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
A999/A999M - 18 Specification for General Requirements for Alloy and Stainless Steel Pipe
A999/A999M-RU-RU - 18 Стандартные технические условия на общие требования к трубам из легированной и нержавеющей стали

A1000-A1999[edit]

A1000/A1000M - 17 Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A1001 - 18 Specification for High-Strength Steel Castings in Heavy Sections
A1002 - 16(2020) Specification for Castings, Nickel-Aluminum Ordered Alloy
A1003/A1003M - 15 Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1004/A1004M - 99(2018) Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
A1007 - 15 Specification for Carbon Steel Wire for Wire Rope
A1008/A1008M - 20 Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
A1009 - 18 Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
A1010/A1010M - 13(2018) Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
A1011/A1011M - 18a Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1011/A1011M-RU-RU - 18a Стандартные технические условия на сталь, тонколистовую и полосовую, горячекатаную, углеродистую, конструкционную, высокопрочную низколегированную, высокопрочную низколегированную с улучшенной формуемостьюи сверхвысокопрочную
A1012 - 10(2015) Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
A1013 - 00(2020) Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
A1014/A1014M - 16e1 Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
A1015 - 01(2018) Guide for Videoborescoping of Tubular Products for Sanitary Applications
A1016/A1016M - 18a Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
A1017/A1017M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
A1018/A1018M - 18 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1021/A1021M - 20 Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
A1022/A1022M - 16b Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1022/A1022M-SP - 16b Especificación estándar para alambres de acero inoxidable corrugados y lisos, y alambre soldado para refuerzo de hormigón
A1022/A1022M-POR - 16b Especificação padrão para Fio de aço inoxidável deformado e liso e fio soldado para reforço de concreto
A1023/A1023M - 19 Specification for Carbon Steel Wire Ropes for General Purposes
A1024/A1024M - 18 Specification for Steel Line Pipe, Black, Plain-End, Seamless
A1025/A1025M - 10(2020) Specification for Ferroalloys and Other Alloying Materials, General Requirements
A1028 - 03(2015) Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
A1030/A1030M - 16 Practice for Measuring Flatness Characteristics of Steel Sheet Products
A1031/A1031M - 12(2017) Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
A1032 - 15(2019) Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
A1033 - 18 Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
A1034/A1034M - 10a(2015) Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
A1035/A1035M - 20 Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
A1036 - 04(2020) Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
A1038 - 19 Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
A1039/A1039M - 20 Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process
A1040 - 17 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1040-RUS - 17 СТАНДАРТНОЕ РУКОВОДСТВО ПО УСТАНОВЛЕНИЮ ГАРМОНИЗИРОВАННЫХ СТАНДАРТНЫХ СОСТАВОВ ДЛЯ МАРОК ДЕФОРМИРУЕМОЙ УГЛЕРОДИСТОЙ, НИЗКОЛЕГИРОВАННОЙ И ЛЕГИРОВАННОЙ СТАЛИ
A1043/A1043M - 18 Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
A1044/A1044M - 16ae1 Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
A1044/A1044M-SP - 16ae1 Especificación de estándar para conjuntos de espárragos de acero de refuerzo para esfuerzo cortante del hormigón
A1044/A1044M-POR - 16ae1 Especificação padrão para Conjuntos de montantes de aço para reforço de cisalhamento de concreto
A1045 - 10(2017) Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
A1046/A1046M - 19 Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
A1047/A1047M - 05(2019) Test Method for Pneumatic Leak Testing of Tubing
A1049/A1049M - 18 Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
A1053/A1053M - 12(2017) Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
A1054 - 16 Specification for Sintered Ferrite Permanent Magnets
A1055/A1055M - 16 Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
A1055/A1055M-SP - 16 Especificación estándar para conjuntos de espárragos de acero para refuerzo de esfuerzo cortante del hormigónEspecificación estándar para barras de acero de refuerzo con doble recubrimiento de zinc y epoxi
A1055/A1055M-POR - 16 Especificação padrão para Vergalhões de aço com revestimento duplo de zinco e epóxi
A1056 - 20 Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
A1057/A1057M - 08(2019) Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1058 - 19 Test Methods for Mechanical Testing of Steel Products—Metric
A1059/A1059M - 18 Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
A1060/A1060M - 16b Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1060/A1060M-SP - 16b Especificación estándar para refuerzo de alambre soldado de acero (galvanizado) revestido en zinc, liso y corrugado, para hormigón
A1060/A1060M-POR - 16b Especificação padrão para Reforço de fio soldado de aço com revestimento de zinco (galvanizado), liso e deformado, para concreto
A1061/A1061M - 20ae1 Test Methods for Testing Multi-Wire Steel Prestressing Strand
A1062 - 10(2020) Specification for Steel Castings Sampling
A1063/A1063M - 20 Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1064/A1064M - 18a Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1064/A1064M-SP - 18a Especificación estándar para refuerzo de alambre soldado y alambre de acero al carbono, liso y corrugado, para hormigón
A1064/A1064M-POR - 18a Especificação padrão para Reforço de fio de aço carbono e fio soldado, liso e deformado, para concreto
A1065/A1065M - 18 Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
A1066/A1066M - 11(2015)e2 Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
A1067/A1067M - 12a(2018) Specification for Test Coupons for Steel Castings
A1068 - 10(2020) Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
A1069/A1069M - 19 Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes
A1070 - 16 Specification for Cast and Sintered Alnico Permanent Magnets
A1071/A1071M - 11(2015) Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
A1072/A1072M - 11(2020) Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
A1073/A1073M - 17 Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
A1074 - 11(2020) Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
A1075 - 12(2017)e1 Specification for Flanged Steel U-Channel Posts
A1076/A1076M - 20 Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
A1077/A1077M - 14 Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
A1078/A1078M - 19 Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
A1079 - 17 Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A1080/A1080M - 19 Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
A1081/A1081M - 15 Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
A1082/A1082M - 16 Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
A1083/A1083M - 12(2017) Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
A1084 - 15a Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
A1085/A1085M - 15 Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
A1085/A1085M-SP - 15 Especificación estándar para secciones estructurales huecas de acero al carbono soldadas conformadas en frío (HSS)
A1086 - 20 Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types
A1087/A1087M - 16 Practice for Using Hand Calipers to Measure the Width of Steel Sheet
A1088 - 13(2019) Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
A1089/A1089M - 14(2020) Specification for Highly Loaded Anti-Friction Bearing Steel
A1090/A1090M - 19 Specification for Forged Rings and Hollows for Use as Base Plates in Power Transmission Structures
A1091/A1091M - 16e1 Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
A1092 - 15(2020) Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
A1093/A1093M - 15(2020)e1 Specification for Electrolytic Plasma Treatment Processing of Conductive Materials
A1094/A1094M - 20 Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
A1095 - 15(2019) Specification for High-Silicon Molybdenum Ferritic Iron Castings
A1096/A1096M - 15 Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
A1097 - 16 Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)
A1098/A1098M - 18 Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
A1099/A1099M - 20 Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
A1100 - 16 Guide for Qualification and Control of Induction Heat Treating
A1101 - 16 Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
A1102 - 19 Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
A1103/A1103M - 16 Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications
A1105 - 17 Specification for Corrugated Steel Manhole Assemblies
A1106/A1106M - 17 Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application
A1107/A1107M - 17 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
A1108 - 17 Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
A1109 - 18 Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
A1110/A1110M - 18 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements
A1111 - 18 Specification for Cast Iron Closet Flanges for Use With Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications
A1112/A1112M - 18 Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes
A1113/A1113M - 20 Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A1114/A1114M - 20 Specification for Low-Relaxation, Seven-Wire, Grade 240 [1655], Stainless Steel Strand for Prestressed Concrete
A1115/A1115M - 19 Practice for Construction of Mechanically Stabilized Earth Walls with Inextensible Soil Reinforcement
A1119 - 20 Specification for Welded Partially Corrugated Tube for Potable Water and General Servic

Withdrawn Standards[edit]

A42/A42M - Specification for Wrought Iron Plates (Last edition published 1966, withdrawn 1972)
A167 - Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip (Withdrawn 2014, no replacement)
A325/A325M - Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016, replaced by F3125/F3125M)
A490/A490M - Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016, replaced by F3125/F3125M)
A570 - Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000, replaced by A1011/A1011M)

B[edit]

B1-B999[edit]

B1 - 13(2018) Specification for Hard-Drawn Copper Wire
B2 - 13(2018) Specification for Medium-Hard-Drawn Copper Wire
B3 - 13(2018) Specification for Soft or Annealed Copper Wire
B3-JPN - 13(2018) 標準仕様軟銅線または焼鈍銅線
B5 - 16 Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
B6 - 18 Specification for Zinc
B8 - 11(2017) Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
B9 - 76(2017)e1 Specification for Bronze Trolley Wire
B16/B16M - 19 Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B19 - 20 Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
B21/B21M - 20 Specification for Naval Brass Rod, Bar, and Shapes
B22/B22M - 17 Specification for Bronze Castings for Bridges and Turntables
B23 - 20 Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
B26/B26M - 18e1 Specification for Aluminum-Alloy Sand Castings
B29 - 19 Specification for Refined Lead
B29-RU-RU - 19 Стандартные технические условия для очищенного свинца
B30 - 20 Specification for Copper Alloys in Ingot and Other Remelt Forms
B32 - 20 Specification for Solder Metal
B33 - 10(2020)e1 Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
B36/B36M - 18 Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B37 - 18 Specification for Aluminum for Use in Iron and Steel Manufacture
B39 - 79(2018) Specification for Nickel
B42 - 20 Specification for Seamless Copper Pipe, Standard Sizes
B43 - 20 Specification for Seamless Red Brass Pipe, Standard Sizes
B47 - 95a(2017) Specification for Copper Trolley Wire
B48 - 00(2016) Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
B49 - 20 Specification for Copper Rod for Electrical Purposes
B61 - 15 Specification for Steam or Valve Bronze Castings
B62 - 17 Specification for Composition Bronze or Ounce Metal Castings
B63 - 07(2018) Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
B66 - 15 Specification for Bronze Castings for Steam Locomotive Wearing Parts
B67 - 14 Specification for Car and Tender Journal Bearings, Lined
B68/B68M - 19 Specification for Seamless Copper Tube, Bright Annealed
B69 - 20 Specification for Rolled Zinc
B70 - 90(2019) Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
B75/B75M - 20 Specification for Seamless Copper Tube
B76 - 90(2018) Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
B77 - 07(2018) Test Method for Thermoelectric Power of Electrical-Resistance Alloys
B78 - 90(2019) Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
B80 - 15 Specification for Magnesium-Alloy Sand Castings
B84 - 07(2019) Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
B85/B85M - 18e1 Specification for Aluminum-Alloy Die Castings
B86 - 18 Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B88M - 20 Specification for Seamless Copper Water Tube (Metric)
B88 - 20 Specification for Seamless Copper Water Tube
B90/B90M - 15 Specification for Magnesium-Alloy Sheet and Plate
B91 - 17 Specification for Magnesium-Alloy Forgings
B92/B92M - 17 Specification for Unalloyed Magnesium Ingot and Stick For Remelting
B93/B93M - 15 Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
B94 - 18 Specification for Magnesium-Alloy Die Castings
B96/B96M - 20 Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
B98/B98M - 13(2019) Specification for Copper-Silicon Alloy Rod, Bar and Shapes
B99/B99M - 15 Specification for Copper-Silicon Alloy Wire for General Applications
B99/B99M - 15 Specification for Copper-Silicon Alloy Wire for General Applications
B100 - 20 Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
B101 - 12(2019) Specification for Lead-Coated Copper Sheet and Strip for Building Construction
B103/B103M - 19 Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
B105 - 05(2020) Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
B106 - 08(2019) Test Methods for Flexivity of Thermostat Metals
B107/B107M - 13 Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
B108/B108M - 19 Specification for Aluminum-Alloy Permanent Mold Castings
B111/B111M - 18a Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B114 - 07(2018) Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
B115 - 10(2016) Specification for Electrolytic Copper Cathode
B115-RUS - 10(2016) Стандартная спецификация на катод из электролитической меди
B116 - 95(2017) Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage
B117 - 19 Practice for Operating Salt Spray (Fog) Apparatus
B117-RU-RU - 19 Стандартное практическое руководство по эксплуатации оборудования для проведения испытаний с солевым распылением (в солевом тумане)
B121/B121M - 16 Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
B122/B122M - 20 Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B124/B124M - 20 Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B127 - 19 Specification for Nickel-Copper Alloy Plate, Sheet, and Strip
B129 - 17 Specification for Cartridge Brass Cartridge Case Cups
B130 - 19 Specification for Commercial Bronze Strip for Bullet Jackets
B131 - 17 Specification for Copper Alloy Bullet Jacket Cups
B134/B134M - 15 Specification for Brass Wire
B135/B135M - 17 Specification for Seamless Brass Tube
B136 - 84(2018) Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
B137 - 95(2014) Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
B138/B138M - 11(2017) Specification for Manganese Bronze Rod, Bar, and Shapes
B139/B139M - 12(2017) Specification for Phosphor Bronze Rod, Bar, and Shapes
B140/B140M - 12(2017) Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
B148 - 18 Specification for Aluminum-Bronze Sand Castings
B150/B150M - 19 Specification for Aluminum Bronze Rod, Bar, and Shapes
B151/B151M - 20 Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B152/B152M - 19 Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B153 - 11(2017) Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154 - 16 Test Method for Mercurous Nitrate Test for Copper Alloys
B159/B159M - 17 Specification for Phosphor Bronze Wire
B160 - 05(2019) Specification for Nickel Rod and Bar
B160-RU-RU - 05(2019) Стандартные технические условия на стержни и прутки из никеля
B161 - 05(2019) Specification for Nickel Seamless Pipe and Tube
B162 - 99(2019) Specification for Nickel Plate, Sheet, and Strip
B163 - 19 Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
B164 - 03(2019) Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B165 - 19 Specification for Nickel-Copper Alloy Seamless Pipe and Tube
B166 - 19 Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire
B167 - 18 Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Seamless Pipe and Tube
B167-RUS - 18 Стандартные технические условия на никель-хром-алюминиевые сплавы (UNS N06699), никель-хром-железные сплавы (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045 и N06696), никель-хром-кобальт-молибденовый сплав (UNS N06617), никель-железо-хром-вольфрамовый сплав (UNS N06674) и никель-хром-молибден-медный сплав (UNS N06235) бесшовных труб и трубок никель-хром-кобальт-молибденовый сплав (UNS N06617), никель-железо-хром-вольфрамовый сплав (UNS N06674) и никель-хром-молибден-медный сплав (UNS N06235) в холоднодеформированных
B168 - 19 Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip
B169/B169M - 20 Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B170 - 99(2020) Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
B171/B171M - 18 Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
B172 - 17 Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
B173 - 17 Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
B174 - 17 Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
B176 - 18 Specification for Copper-Alloy Die Castings
B177/B177M - 11(2017) Guide for Engineering Chromium Electroplating
B179 - 18 Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
B183 - 18 Practice for Preparation of Low-Carbon Steel for Electroplating
B187/B187M - 20 Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
B188 - 15e1 Specification for Seamless Copper Bus Pipe and Tube
B189 - 05(2015) Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
B193 - 20 Test Method for Resistivity of Electrical Conductor Materials
B194 - 15 Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B194-RU-RU - 15 Стандартные технические условия на плиты, листы, штрипсы и катаные прутки из медно-бериллиевого сплава
B196/B196M - 18 Specification for Copper-Beryllium Alloy Rod and Bar
B196/B196M-RU-RU - 18 Стандартные технические условия на стержни и прутки из меднобериллиевого сплава
B197/B197M - 20 Specification for Copper-Beryllium Alloy Wire
B199 - 17 Specification for Magnesium-Alloy Permanent Mold Castings
B200 - 85(2015) Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
B201 - 80(2019) Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
B206/B206M - 12(2017) Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
B208 - 14 Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
B209 - 14 Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M - 14 Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
B210/B210M - 19a Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B211/B211M - 19 Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B212 - 17 Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
B212-RU-RU - 17 Стандартный метод испытания для определения объемной плотности свободнотекучих металлопорошков с использованием прибора Холла
B213 - 20 Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
B214 - 16 Test Method for Sieve Analysis of Metal Powders
B214-RU-RU - 16 Стандартный метод испытания для проведения ситового анализа металлопорошков
B215 - 20 Practices for Sampling Metal Powders
B216 - 16 Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
B221M - 13 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
B221 - 20 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B223 - 08(2018) Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
B224 - 16 Classification of Coppers
B226 - 11(2016) Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
B227 - 15(2019) Specification for Hard-Drawn Copper-Clad Steel Wire
B228 - 11a(2016) Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
B229 - 12(2017) Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
B230/B230M - 07(2016) Specification for Aluminum 1350–H19 Wire for Electrical Purposes
B231/B231M - 16 Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
B232/B232M - 17 Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
B233 - 97(2016) Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
B234 - 17 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
B234M - 17 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
B236 - 07(2015) Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
B236M - 07(2015) Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric)
B237 - 20 Specification for Refined Antimony
B240 - 17 Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B241/B241M - 16 Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B242 - 99(2020) Guide for Preparation of High-Carbon Steel for Electroplating
B243 - 20 Terminology of Powder Metallurgy
B244 - 09(2014) Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
B246 - 15 Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
B247 - 20 Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
B247M - 20 Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
B248 - 17 Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B248M - 17 Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
B248-RU-RU - 17 Технические условия на общие требования для плит, листов, штрипсов и катаных прутков из меди и медных сплавов, полученных обработкой металла давлением
B249/B249M - 20 Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B250/B250M - 19 Specification for General Requirements for Wrought Copper Alloy Wire
B251/B251M - 17 Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B252 - 92(2020) Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
B253 - 11(2017) Guide for Preparation of Aluminum Alloys for Electroplating
B254 - 92(2020)e1 Practice for Preparation of and Electroplating on Stainless Steel
B258 - 18 Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
B263/B263M - 14(2020) Test Method for Determination of Cross-Sectional Area of Stranded Conductors
B265 - 20a Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B267 - 07(2018) Specification for Wire for Use In Wire-Wound Resistors
B271/B271M - 18 Specification for Copper-Base Alloy Centrifugal Castings
B272 - 12(2019) Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
B276 - 05(2015) Test Method for Apparent Porosity in Cemented Carbides
B277 - 18 Test Method for Hardness of Electrical Contact Materials
B279 - 13(2019) Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
B280 - 20 Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B281 - 88(2019)e1 Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
B283/B283M - 20 Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B286 - 20 Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
B294 - 17 Test Method for Hardness Testing of Cemented Carbides
B296 - 20 Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
B298 - 12(2017) Specification for Silver-Coated Soft or Annealed Copper Wire
B299/B299M - 18 Specification for Titanium Sponge
B301/B301M - 13(2020) Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
B302 - 17 Specification for Threadless Copper Pipe, Standard Sizes
B306 - 20 Specification for Copper Drainage Tube (DWV)
B308/B308M - 20 Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B311 - 17 Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
B312 - 20 Test Method for Green Strength of Specimens Compacted from Metal Powders
B315 - 19 Specification for Seamless Copper Alloy Pipe and Tube
B316/B316M - 20 Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B317/B317M - 07(2015)e1 Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
B319 - 91(2020) Guide for Preparation of Lead and Lead Alloys for Electroplating
B320 - 60(2019) Practice for Preparation of Iron Castings for Electroplating
B322 - 99(2020)e1 Guide for Cleaning Metals Prior to Electroplating
B324 - 01(2016) Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
B327 - 16 Specification for Master Alloys Used in Making Zinc Die Casting Alloys
B329 - 20 Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
B330 - 20 Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
B331 - 20 Test Method for Compressibility of Metal Powders in Uniaxial Compaction
B333 - 03(2018) Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
B335 - 03(2018) Specification for Nickel-Molybdenum Alloy Rod
B338 - 17e1 Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
B338-RU-RU - 17e1 Технические условия на бесшовные и сварные трубы из титана и титановых сплавов, предназначенные для конденсаторов и теплообменников
B339 - 19 Specification for Pig Tin
B343 - 92a(2020) Practice for Preparation of Nickel for Electroplating with Nickel
B344 - 20 Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
B348/B348M - 19 Specification for Titanium and Titanium Alloy Bars and Billets
B348/B348M-RU-RU - 19 Стандартные технические условия на прутки и болванки из титана и титановых сплавов
B349/B349M - 16 Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
B350/B350M - 11(2016)e1 Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
B351/B351M - 13(2018) Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
B352/B352M - 17 Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
B353 - 12(2017) Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
B354 - 19 Terminology Relating to Uninsulated Metallic Electrical Conductors
B355 - 11(2016) Specification for Nickel-Coated Soft or Annealed Copper Wire
B359/B359M - 18 Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B360 - 20 Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
B361 - 16 Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
B362 - 91(2020) Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
B363 - 19 Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
B364 - 18 Specification for Tantalum and Tantalum Alloy Ingots
B365 - 12(2019) Specification for Tantalum and Tantalum Alloy Rod and Wire
B366/B366M - 20 Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
B367 - 13(2017) Specification for Titanium and Titanium Alloy Castings
B367-RU-RU - 13(2017)
B368 - 09(2014) Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
B369/B369M - 20 Specification for Copper-Nickel Alloy Castings
B370 - 12(2019) Specification for Copper Sheet and Strip for Building Construction
B371/B371M - 19 Specification for Copper-Zinc-Silicon Alloy Rod
B372 - 17 Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
B373 - 19 Specification for Aluminum Foil for Capacitors
B374 - 06(2019) Terminology Relating to Electroplating
B379 - 20 Specification for Phosphorized Coppers—Refinery Shapes
B380 - 97(2018) Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
B381 - 13(2019) Specification for Titanium and Titanium Alloy Forgings
B381-RU-RU - 13(2019) Стандартные технические условия на поковки из титана и титанового сплава
B386/B386M - 19e1 Specification for Molybdenum and Molybdenum Alloy Plate,Sheet, Strip, Foil, and Ribbon
B387 - 18 Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
B388 - 06(2018) Specification for Thermostat Metal Sheet and Strip
B389 - 81(2020) Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
B391 - 18 Specification for Niobium and Niobium Alloy Ingots
B392 - 18 Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
B393 - 18 Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
B394 - 18 Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
B395/B395M - 18 Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
B398/B398M - 15 Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes
B399/B399M - 04(2015) Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
B400/B400M - 19 Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
B401 - 12(2016) Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
B403 - 20 Specification for Magnesium-Alloy Investment Castings
B406 - 96(2015) Test Method for Transverse Rupture Strength of Cemented Carbides
B407 - 08a(2019) Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
B408 - 06(2016) Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B409 - 06(2016) Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
B411/B411M - 14(2019) Specification for Copper-Nickel-Silicon Alloy Rod and Bar
B413 - 97a(2017) Specification for Refined Silver
B415 - 16 Specification for Hard-Drawn Aluminum-Clad Steel Wire
B416 - 98(2018) Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B417 - 18 Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
B418 - 16a Specification for Cast and Wrought Galvanic Zinc Anodes
B422/B422M - 17 Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
B423 - 11(2016) Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube
B423-RU-RU - 11(2016) Стандартные технические условия на бесшовные трубы и трубки из никель-железо-хром-молибден-медного сплава (UNS N08825, N08221 и N06845)
B424 - 19e1 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloys Plate, Sheet, and Strip
B425 - 19 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloys Rod and Bar
B427 - 09(2015) Specification for Gear Bronze Alloy Castings
B428 - 09(2018) Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
B429/B429M - 20 Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B432 - 19 Specification for Copper and Copper Alloy Clad Steel Plate
B434 - 06(2016) Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242) Plate, Sheet, and Strip
B435 - 06(2016) Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
B438 - 17 Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B439 - 18 Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B440 - 12(2017) Specification for Cadmium
B441 - 16 Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
B443 - 19 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip
B444 - 18 Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
B444-RU-RU - 18 Стандартные технические условия на трубы из никель-хроммолибден-ниобиевых сплавов (UNS N06625 и UNS N06852) и никельхром-молибден-кремниевого сплава (UNS N06219)
B446 - 19 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
B446-RU-RU - 19 Стандартные технические условия для стержней и прутков из сплава никель-хром-молибден-ниобий (UNS N06625), сплава никель-хром-молибден-кремний (UNS N06219) и сплава никельхром-молибден-вольфрам (UNS N06650)
B447 - 12a(2021) Specification for Welded Copper Tube
B449 - 93(2015) Specification for Chromates on Aluminum
B452 - 09(2015) Specification for Copper-Clad Steel Wire for Electronic Application
B453/B453M - 19 Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
B455/B455M - 20 Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
B456 - 17 Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
B457 - 67(2018) Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
B462 - 18 Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
B462-RU-RU - 18 Стандартные технические условия на кованые или катаные фланцы труб, кованые фитинги и арматуру и детали из никелевых сплавов для эксплуатации в коррозионной среде при высокой температуре
B463 - 10(2016) Specification for UNS N08020 Alloy Plate, Sheet, and Strip
B464/B464M - 15(2020) Specification for Welded UNS N08020 Alloy Pipe
B465 - 20 Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B466/B466M - 18 Specification for Seamless Copper-Nickel Pipe and Tube
B467 - 14 Specification for Welded Copper-Nickel Pipe
B468 - 10(2020) Specification for Welded UNS N08020 Alloy Tubes
B470 - 02(2017) Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
B472 - 18 Specification for Nickel Alloy Billets and Bars for Reforging
B472-RU-RU - 18 Стандартные технические условия на цилиндрические заготовки и прутки из никелевого сплава для перековки
B473 - 07(2018) Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B474/B474M - 19 Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
B475 - 07(2018) Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
B476 - 01(2017) Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
B477 - 97(2017) Specification for Gold-Silver-Nickel Electrical Contact Alloy
B478 - 85(2016) Test Method for Cross Curvature of Thermostat Metals
B479 - 19 Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
B480 - 88(2017) Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
B481 - 68(2019) Practice for Preparation of Titanium and Titanium Alloys for Electroplating
B482 - 85(2019) Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
B483/B483M - 20 Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
B487 - 20 Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
B488 - 18 Specification for Electrodeposited Coatings of Gold for Engineering Uses
B489 - 85(2018) Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
B490 - 09(2014) Practice for Micrometer Bend Test for Ductility of Electrodeposits
B491/B491M - 15 Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
B493/B493M - 14(2019) Specification for Zirconium and Zirconium Alloy Forgings
B494/B494M - 08(2020) Specification for Primary Zirconium
B495 - 10(2017) Specification for Zirconium and Zirconium Alloy Ingots
B496 - 16 Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
B498/B498M - 19 Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
B499 - 09(2014) Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
B500/B500M - 12(2018) Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
B501 - 10(2019) Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
B502/B502M - 19 Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors
B504 - 90(2017) Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
B505/B505M - 18 Specification for Copper Alloy Continuous Castings
B506 - 16 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
B507 - 14 Practice for Design of Articles to Be Electroplated on Racks
B508 - 16 Specification for Copper Alloy Strip for Flexible Metal Hose
B511/B511M - 16 Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
B512 - 20 Specification for Nickel-Chromium-Silicon Alloy Billets and Bars
B514 - 05(2019) Specification for Welded Nickel-Iron-Chromium Alloy Pipe
B515 - 20 Specification for Welded Nickel-Iron-Chromium Alloy Tubes
B516 - 18 Specification for Welded Nickel-Chromium-Aluminum Alloy (UNS N06699) and Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes
B517 - 19 Specification for Welded Nickel-Chromium-Iron-Alloy Pipe
B520 - 12(2017) Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
B521 - 19 Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
B522 - 01(2017) Specification for Gold-Silver-Platinum Electrical Contact Alloy
B523/B523M - 18 Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
B524/B524M - 18 Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
B527 - 20 Test Method for Tap Density of Metal Powders and Compounds
B528 - 16(2020)e1 Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
B530 - 09(2014) Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
B532 - 85(2014) Specification for Appearance of Electroplated Plastic Surfaces
B533 - 85(2019) Test Method for Peel Strength of Metal Electroplated Plastics
B534 - 20 Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B535 - 06(2017) Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
B536 - 19 Specification for Nickel-Iron-Chromium-Silicon Alloys Plate, Sheet, and Strip
B537 - 70(2019) Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
B539 - 20 Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
B540 - 97(2017) Specification for Palladium Electrical Contact Alloy
B541 - 01(2018) Specification for Gold Electrical Contact Alloy
B542 - 13(2019) Terminology Relating to Electrical Contacts and Their Use
B543/B543M - 18 Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
B545 - 13 Specification for Electrodeposited Coatings of Tin
B546 - 19 Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-Si Alloy, Ni-Cr-Fe-Al Alloy, Ni-Cr-Fe Alloy, and Ni-Cr-Fe-Si Alloy Pipe
B548 - 03(2017) Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
B549 - 18 Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors
B550/B550M - 07(2019) Specification for Zirconium and Zirconium Alloy Bar and Wire
B551/B551M - 12(2017) Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
B552 - 19 Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
B555 - 86(2018) Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
B556 - 90(2018) Guide for Measurement of Thin Chromium Coatings by Spot Test
B557 - 15 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B557M - 15 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
B557-RUS - 15 Стандартные методы испытаний на растяжение кованых и литых изделий из алюминиевого и магниевого сплавов
B558 - 79(2019) Practice for Preparation of Nickel Alloys for Electroplating
B559 - 12(2017) Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
B560 - 20 Specification for Modern Pewter Alloys
B561 - 94(2018) Specification for Refined Platinum
B562 - 95(2017) Specification for Refined Gold
B563 - 01(2017) Specification for Palladium-Silver-Copper Electrical Contact Alloy
B564 - 19 Specification for Nickel Alloy Forgings
B564-RU-RU - 19 Стандартные технические условия на поковки из никелевых сплавов
B565 - 20 Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
B566 - 04a(2016) Specification for Copper-Clad Aluminum Wire
B567 - 98(2014) Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
B568 - 98(2014) Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B569 - 19 Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
B570 - 16 Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
B571 - 18 Practice for Qualitative Adhesion Testing of Metallic Coatings
B572 - 06(2016) Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
B573 - 06(2016) Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod
B574 - 18 Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
B574-RU-RU - 18 Стандартные технические условия на стержни из низкоуглеродистых никель-хром-молибденовых, никель-молибден-хромистых, никельмолибден-хром-танталовых, никель-хром-молибден-медных и никельхром-молибден-вольфрамовых сплавов
B575 - 17 Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip
B575-RU-RU - 17 Стандартные технические условия на плиты, листы и штрипсы из низкоуглеродистых никель-хром-молибденовых, никель-хром-молибден-медных, никель-молибден-хром-танталовых, никель-хроммолибден-вольфрамовых и никель-молибден-хромистых сплавов
B576 - 94(2016) Guide for Arc Erosion Testing of Electrical Contact Materials
B577 - 19 Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
B578 - 87(2015) Test Method for Microhardness of Electroplated Coatings
B579 - 73(2015) Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
B580 - 79(2019) Specification for Anodic Oxide Coatings on Aluminum
B581 - 17 Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
B582 - 07(2018) Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
B584 - 14 Specification for Copper Alloy Sand Castings for General Applications
B587 - 19 Specification for Welded Brass Tube
B589 - 94(2017) Specification for Refined Palladium
B591 - 20a Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
B592 - 20 Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B593 - 21 Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
B594 - 19 Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
B595 - 11(2016) Specification for Sintered Aluminum Structural Parts
B596 - 89(2017) Specification for Gold-Copper Alloy Electrical Contact Material
B599 - 20 Specification for Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy Plate, Sheet, and Strip
B600 - 11(2017) Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
B601 - 18a Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
B602 - 88(2016) Test Method for Attribute Sampling of Metallic and Inorganic Coatings
B603 - 07(2018) Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
B604 - 91(2019) Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
B605 - 95a(2015) Specification for Electrodeposited Coatings of Tin-Nickel Alloy
B606/B606M - 19 Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B607 - 15 Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
B608 - 18 Specification for Welded Copper-Alloy Pipe
B609/B609M - 12(2016) Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
B610 - 19 Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
B611 - 13(2018) Test Method for Determining the High Stress Abrasion Resistance of Hard Materials
B613 - 17 Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
B614 - 16 Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
B615 - 79(2017) Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
B616 - 96(2018) Specification for Refined Rhodium
B617 - 98(2016) Specification for Coin Silver Electrical Contact Alloy
B618/B618M - 18e1 Specification for Aluminum-Alloy Investment Castings
B619/B619M - 19 Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
B620 - 03(2018) Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
B621 - 02(2016) Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
B622 - 17b Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B622-RU-RU - 17b Стандартные технические условия на бесшовные трубы большого и малого диаметра из никеля и никель-кобальтового сплава
B624 - 07(2017) Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
B625 - 17 Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip
B626 - 19 Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
B628 - 98(2016) Specification for Silver-Copper Eutectic Electrical Contact Alloy
B629 - 77(2019) Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
B630 - 88(2017) Practice for Preparation of Chromium for Electroplating with Chromium
B631 - 93(2016) Specification for Silver-Tungsten Electrical Contact Materials
B632/B632M - 18 Specification for Aluminum-Alloy Rolled Tread Plate
B633 - 19 Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B634 - 14a Specification for Electrodeposited Coatings of Rhodium for Engineering Use
B635 - 00(2015) Specification for Coatings of Cadmium-Tin Mechanically Deposited
B636/B636M - 15 Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
B637 - 18 Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
B637-RU-RU - 18 Стандартные технические условия на прутки, поковки и кованые заготовки из холоднодеформированных дисперсионно-упрочненных и никелевых сплавов для эксплуатации в условиях средней или высокой температуры
B639 - 02(2018) Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
B640 - 12a(2021) Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
B643 - 18 Specification for Copper-Beryllium Alloy Seamless Tube
B644 - 11(2017) Specification for Copper Alloy Addition Agents
B645 - 10(2015) Practice for Linear-Elastic Plane–Strain Fracture Toughness Testing of Aluminum Alloys
B646 - 19 Practice for Fracture Toughness Testing of Aluminum Alloys
B647 - 10(2016) Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
B648 - 10(2015)e1 Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B649 - 17 Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08034, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
B650 - 95(2018) Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
B651 - 83(2019) Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
B652/B652M - 10(2018) Specification for Niobium-Hafnium Alloy Ingots
B653/B653M - 11(2020) Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
B654/B654M - 10(2018) Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
B655/B655M - 10(2018) Specification for Niobium-Hafnium Alloy Bar and Wire
B657 - 18 Guide for Metallographic Identification of Microstructure in Cemented Carbides
B658/B658M - 11(2020) Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
B659 - 90(2014) Guide for Measuring Thickness of Metallic and Inorganic Coatings
B660 - 15 Practices for Packaging/Packing of Aluminum and Magnesium Products
B661 - 12(2020) Practice for Heat Treatment of Magnesium Alloys
B662/B662M - 20 Specification for Silver-Molybdenum Electrical Contact Material
B663/B663M - 20 Specification for Silver-Tungsten Carbide Electrical Contact Material
B664 - 18 Specification for 80 % Silver-20 % Graphite Sliding Contact Material
B665 - 19 Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
B666/B666M - 20 Practice for Identification Marking of Aluminum and Magnesium Products
B667 - 97(2019) Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
B668 - 14(2019) Specification for UNS N08028 and N08029 Seamless Pipe and Tube
B670 - 07(2018) Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
B671 - 81(2017) Specification for Refined Iridium
B672 - 02(2018) Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
B673 - 05(2016) Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
B674 - 05(2016) Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
B675 - 02(2018) Specification for UNS N08367 Welded Pipe
B675-RUS - 02(2018) Стандартная спецификация для сварных труб из сплава UNS N08367
B676 - 19 Specification for UNS N08367 Welded Tube
B677 - 05(2016) Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
B678 - 86(2017) Test Method for Solderability of Metallic-Coated Products
B679 - 98(2015) Specification for Electrodeposited Coatings of Palladium for Engineering Use
B680 - 80(2019) Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
B682 - 01(2016) Specification for Standard Metric Sizes of Electrical Conductors
B683 - 20 Specification for Pure Palladium Electrical Contact Material
B684/B684M - 16 Specification for Platinum-Iridium Electrical Contact Materials
B685 - 20 Specification for Palladium-Copper Electrical Contact Material
B686/B686M - 18 Specification for Aluminum Alloy Castings, High-Strength
B687 - 99(2016) Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
B688 - 18 Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08367) Plate, Sheet, and Strip
B689 - 97(2018)e1 Specification for Electroplated Engineering Nickel Coatings
B690 - 18 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Seamless Pipe and Tube
B691 - 18 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire
B692 - 18 Specification for 75 % Silver-25 % Graphite Sliding Contact Material
B693 - 17 Specification for Silver-Nickel Electrical Contact Materials
B694 - 19 Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
B695 - 04(2016) Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B696 - 00(2015) Specification for Coatings of Cadmium Mechanically Deposited
B697 - 88(2016) Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
B698/B698M - 10(2021) Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
B699 - 86(2015) Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
B700 - 20 Specification for Electrodeposited Coatings of Silver for Engineering Use
B701/B701M - 13(2018) Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
B702 - 93(2019) Specification for Copper-Tungsten Electrical Contact Material
B703 - 17 Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
B704 - 19 Specification for Welded Nickel Alloy Tubes
B704-RU-RU - 19 Стандартные технические условия на сварные трубы из никелевых сплавов
B705 - 17 Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
B705-RU-RU - 17 Стандартные технические условия на сварные трубы из никелевых сплавов (UNS N06625, N06219 и N08825)
B706 - 18 Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
B708 - 12(2019) Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
B709 - 17 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and Strip
B710 - 20a Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
B711 - 18 Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
B717 - 96(2018) Specification for Refined Ruthenium
B718 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
B719 - 20 Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Bar
B722 - 06(2016) Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
B723 - 20 Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe
B725 - 18 Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
B726 - 02(2016) Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
B727 - 04(2020) Practice for Preparation of Plastics Materials for Electroplating
B729 - 20 Specification for Seamless Nickel-Iron-Chromium-Molybdenum-Copper Nickel Alloy Pipe and Tube
B730 - 08(2018) Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
B733 - 15 Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
B733-RU-RU - 15 Стандартные технические условия на автокаталитические (химические) никель-фосфорные покрытия на металле
B734 - 97(2018) Specification for Electrodeposited Copper for Engineering Uses
B735 - 16 Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
B737 - 10(2015) Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
B738 - 13(2018) Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
B739 - 03(2018) Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
B740 - 09(2015) Specification for Copper-Nickel-Tin Spinodal Alloy Strip
B743 - 12(2020) Specification for Seamless Copper Tube in Coils
B744/B744M - 15(2020) Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
B745/B745M - 15 Specification for Corrugated Aluminum Pipe for Sewers and Drains
B746/B746M - 16 Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
B747 - 20 Specification for Copper-Zirconium Alloy Sheet and Strip
B748 - 90(2016) Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
B749 - 20 Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
B750 - 16 Specification for GALFAN
B751 - 20 Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
B752/B752M - 18 Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
B753 - 07(2018) Specification for Thermostat Component Alloys
B754 - 17 Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
B755 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
B756 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy(UNS N06110) Rod and Bar
B757 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
B758 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
B759 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
B760 - 07(2019) Specification for Tungsten Plate, Sheet, and Foil
B761 - 17 Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
B761-RU-RU - 17 Стандартный метод испытания гранулометрического состава металлических порошков и связанных с ними соединений с помощью контрольного рентгеновского исследования гравитационного осаждения
B762 - 90(2016) Test Method of Variables Sampling of Metallic and Inorganic Coatings
B763/B763M - 15 Specification for Copper Alloy Sand Castings for Valve Applications
B764 - 04(2014) Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
B765 - 03(2018) Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
B766 - 86(2015) Specification for Electrodeposited Coatings of Cadmium
B767 - 88(2016) Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
B768 - 11(2016) Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
B769 - 11(2016) Test Method for Shear Testing of Aluminum Alloys
B770 - 15 Specification for Copper-Beryllium Alloy Sand Castings for General Applications
B771 - 11(2017) Test Method for Short Rod Fracture Toughness of Cemented Carbides
B772 - 97(2012) Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
B774 - 00(2014) Specification for Low Melting Point Alloys
B775/B775M - 19 Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
B776 - 12(2019) Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
B777 - 15(2020) Specification for Tungsten Base, High-Density Metal
B778 - 19 Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
B779 - 18 Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
B780 - 16 Specification for 75 % Silver, 24.5 % Copper, 0.5 % Nickel Electrical Contact Alloy
B781 - 93a(2012) Guide for Silver-Cadmium Oxide Contact Material
B783 - 19 Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
B784 - 01(2017)e1 Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
B786/B786M - 08(2018) Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
B787/B787M - 04(2020) Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
B788/B788M - 09(2020) Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B789/B789M - 16 Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
B790/B790M - 16 Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
B792 - 16 Specification for Zinc Alloys in Ingot Form for Slush Casting
B793 - 16 Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
B794 - 97(2020) Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
B795 - 20 Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
B796 - 20 Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications
B797 - 20 Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
B798 - 95(2020) Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
B799 - 95(2020) Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
B800 - 05(2015) Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
B801 - 18 Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
B802/B802M - 19 Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B803/B803M - 19 Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
B804 - 02(2018) Specification for UNS N08367 and UNS N08926 Welded Pipe
B805 - 06(2017)e1 Specification for Precipitation Hardening Nickel Alloys Bar and Wire
B805-RU-RU - 06(2017)e1 Стандартные технические условия на прутки и проволоку из никелевых сплавов дисперсионного твердения
B806 - 14 Specification for Copper Alloy Permanent Mold Castings for General Applications
B807/B807M - 20 Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
B808 - 10(2020) Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
B809 - 95(2018) Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
B810 - 01a(2017) Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
B811 - 13(2017) Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
B812 - 18 Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
B813 - 16 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
B814 - 06(2020) Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy(UNS N06920) Plate, Sheet, and Strip
B815 - 02(2016) Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
B816 - 00(2015) Specification for Coatings of Cadmium-Zinc Mechanically Deposited
B818 - 03(2018) Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy(UNS R31233) Plate, Sheet and Strip
B819 - 19 Specification for Seamless Copper Tube for Medical Gas Systems
B820 - 18 Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
B821 - 10(2016) Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
B822 - 20 Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
B823 - 20 Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
B824 - 17 Specification for General Requirements for Copper Alloy Castings
B825 - 19 Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
B826 - 09(2020) Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
B827 - 05(2020) Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
B828 - 16 Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
B829 - 19a Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
B829-RU-RU - 19a Стандартные технические условия на общие требования для бесшовных труб и трубок из никеля и никелевых сплавов
B830 - 18 Specification for Uniform Test Methods and Frequency
B831 - 19 Test Method for Shear Testing of Thin Aluminum Alloy Products
B832 - 93(2018) Guide for Electroforming with Nickel and Copper
B833 - 20 Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
B834 - 17 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts
B835 - 14(2020) Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
B836 - 00(2015) Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
B837 - 19 Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems
B839 - 04(2014) Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method
B840 - 15 Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits
B841 - 18 Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits
B842 - 99(2016) Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits
B843 - 18e1 Specification for Magnesium Alloy Anodes for Cathodic Protection
B844 - 98(2016) Guide for Silver-Tin Oxide Contact Material
B845 - 97(2018) Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
B846 - 19a Terminology for Copper and Copper Alloys
B848 - 15 Specification for Powder Forged (PF) Ferrous Materials
B849 - 02(2019) Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
B850 - 98(2015) Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
B851 - 04(2020) Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
B852 - 16e1 Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
B853 - 16 Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
B854 - 98(2016) Guide for Measuring Electrical Contact Intermittences
B855 - 17 Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
B856 - 18 Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
B857 - 18 Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
B858 - 06(2018) Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B859 - 13(2018) Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
B860 - 18 Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
B861 - 19 Specification for Titanium and Titanium Alloy Seamless Pipe
B862 - 19 Specification for Titanium and Titanium Alloy Welded Pipe
B863 - 19 Specification for Titanium and Titanium Alloy Wire
B864/B864M - 19 Specification for Corrugated Aluminum Box Culverts
B865 - 20 Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging Stock
B866 - 95(2018) Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
B867 - 95(2018) Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
B869 - 07(2018) Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
B870 - 08(2014) Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
B872 - 19 Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
B873 - 17 Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
B874 - 96(2018) Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
B875 - 96(2018) Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
B877 - 96(2018) Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
B878 - 97(2019) Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
B879 - 17 Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
B880 - 14(2019) Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
B880-RU-RU - 14(2019) Стандартные технические условия на общие требования к пределам химического контрольного анализа никеля, никелевых сплавов и кобальтовых сплавов
B881 - 17 Terminology Relating to Aluminum- and Magnesium-Alloy Products
B882 - 10(2018) Specification for Pre-Patinated Copper for Architectural Applications
B883 - 19 Specification for Metal Injection Molded (MIM) Materials
B884 - 11(2019) Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
B885 - 09(2020) Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
B886 - 19 Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
B887 - 12(2019) Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
B888/B888M - 19 Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
B890 - 20 Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
B891/B891M - 19 Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
B892 - 10(2015) Specification for ACuZinc5
B893 - 98(2018) Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
B894 - 17 Specification for ACuZinc5
B895 - 16(2020)e1 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
B896 - 10(2020) Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
B897 - 18 Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot
B898 - 20 Specification for Reactive and Refractory Metal Clad Plate
B899 - 18 Terminology Relating to Non-ferrous Metals and Alloys
B900 - 16 Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
B901 - 04(2015) Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
B902/B902M - 13(2018) Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
B903 - 15 Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
B904 - 00(2014) Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
B905 - 00(2016) Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
B906 - 19 Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
B906 - 19 Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
B907 - 16 Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
B908 - 19 Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
B909 - 17 Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
B910/B910M - 07(2018) Specification for Annealed Copper-Clad Steel Wire
B911/B911M - 12(2016) Specification for ACSR Twisted Pair Conductor (ACSR/TP)
B912 - 02(2018) Specification for Passivation of Stainless Steels Using Electropolishing
B913 - 05(2015) Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
B914 - 19 Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
B915 - 01(2017) Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
B916 - 01(2017) Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
B917/B917M - 12(2020) Practice for Heat Treatment of Aluminum-Alloy Castings From All Processes
B918/B918M - 20a Practice for Heat Treatment of Wrought Aluminum Alloys
B919 - 19 Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
B920 - 16 Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
B921 - 08(2018) Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
B922 - 20 Test Method for Metal Powder Specific Surface Area by Physical Adsorption
B923 - 20 Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
B924 - 02(2017) Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
B925 - 15 Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
B926 - 09(2017) Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
B927/B927M - 17 Specification for Brass Rod, Bar, and Shapes
B928/B928M - 15 Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
B929 - 17 Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
B930 - 03(2017) Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
B931 - 14(2018)e1 Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
B933 - 20 Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
B934 - 15 Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
B935 - 20 Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
B936 - 19 Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
B937 - 18 Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
B939 - 15 Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
B940 - 05(2020) Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
B941 - 16 Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
B942 - 10(2015) Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
B943 - 16 Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
B944 - 11(2016) Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
B945 - 06(2014) Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers
B946 - 11(2016) Test Method for Surface Finish of Powder Metallurgy (PM) Products
B947 - 14(2020)e1 Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
B949 - 18 Specification for General Requirements for Zinc and Zinc Alloy Products
B950 - 20 Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
B951 - 11(2018) Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
B952/B952M - 19 Specification for Zinc Alloys in Ingot Form for Spin Casting
B953 - 13 Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
B954 - 15 Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
B955/B955M - 18 Specification for Aluminum-Alloy Centrifugal Castings
B956 - 19e1 Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
B957/B957M - 19 Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
B958/B958M - 19 Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
B960 - 18 Specification for Prime Western Grade-Recycled (PWG-R) Zinc
B961 - 13(2019) Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
B962 - 17 Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
B963 - 17 Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
B964 - 16 Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
B965 - 09(2018) Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
B967/B967M - 18 Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
B968/B968M - 16 Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
B969/B969M - 18e1 Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
B971 - 10(2020)e1 Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
B972 - 10(2020)e1 Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
B973 - 10(2020)e1 Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
B974/B974M - 16(2021) Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
B975 - 18e1 Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
B976 - 11(2015) Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
B977/B977M - 19 Specification for Titanium and Titanium Alloy Ingots
B977/B977M-RU-RU - 19 Технические условия на литые заготовки из титана и сплава титана
B978/B978M - 14 Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)
B979 - 12(2018) Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors
B981/B981M - 19 Specification for Low-Leaded Brass Rod, Bar, Wire, and Shapes
B982 - 20 Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
B983 - 16e1 Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
B984 - 12(2020)e1 Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use
B985 - 12(2016) Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
B986 - 13(2019) Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
B987/B987M - 20 Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
B988 - 18 Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
B989 - 19a Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings
B994/B994M - 15 Specification for Nickel-Cobalt Alloy Coating
B995 - 15a Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)
B997 - 16e1 Specification for Zinc-Aluminum Alloys in Ingot Form for Hot-Dip Coatings
B998 - 17 Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings
B999 - 15 Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate

B1000-B1999[edit]

B1000 - 15 Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
B1001 - 17 Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans
B1002 - 16(2020) Specification for Refined Indium
B1003 - 16 Specification for Seamless Copper Tube for Linesets
B1004 - 16 Practice for Contact Performance Classification of Electrical Connection Systems
B1005 - 17 Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
B1006 - 17 Specification for Electrical Overhead Conductor Code Word Names
B1007 - 17 Specification for Welded Precipitation Hardenable or Cold Worked, Nickel Alloy Tube
B1008 - 18 Test Method for Stress-Strain Testing for Overhead Electrical Conductors
B1009 - 20 Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures
B1010/B1010M - 19 Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
B1011/B1011M - 19 Specification for Cobalt Alloy Spring Wire
B1013 - 20 Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
B1014 - 20 Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
B1015 - 20 Practice for Form and Style of Standards Relating to Refined Nickel and Cobalt and Their Alloy

C[edit]

C1-C999[edit]

C4 - 04(2018) Specification for Clay Drain Tile and Perforated Clay Drain Tile
C5 - 18 Specification for Quicklime for Structural Purposes
C10/C10M - 19 Specification for Natural Cement
C11 - 18b Terminology Relating to Gypsum and Related Building Materials and Systems
C12 - 17e1 Practice for Installing Vitrified Clay Pipe Lines
C14 - 20 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
C14M - 20 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
C16 - 03(2018) Test Method for Load Testing Refractory Shapes at High Temperatures
C20 - 00(2015) Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C22/C22M - 00(2015) Specification for Gypsum
C24 - 09(2018) Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
C25 - 19 Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C25-RU-RU - 19 Стандартные методы химического анализа известняка, негашеной и гашеной извести
C27 - 98(2018) Classification of Fireclay and High-Alumina Refractory Brick
C28/C28M - 10(2020) Specification for Gypsum Plasters
C29/C29M - 17a Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
C29/C29M-SP - 17a Método de prueba estándar para determinar la densidad a granel (“peso unitario”) y los huecos de aire de un agregado
C29/C29M-POR - 17a Método de ensaio padrão para Densidade a granel (“peso unitário”) e vazios no agregado
C31/C31M - 19a Practice for Making and Curing Concrete Test Specimens in the Field
C31/C31M-SP - 19a Práctica estándar para la preparación y curado de especímenes de prueba de hormigón en el campo
C31/C31M-POR - 19a Prática padrão para Fazer e curar espécimes de ensaio de concreto no campo
C32 - 13(2017) Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C33/C33M - 18 Specification for Concrete Aggregates
C33/C33M-SP - 18 Especificación estándar para agregados para hormigón
C33/C33M-POR - 18 Especificação padrão para Agregados de concreto
C34 - 17 Specification for Structural Clay Loadbearing Wall Tile
C35 - 01(2019) Specification for Inorganic Aggregates for Use in Gypsum Plaster
C39/C39M - 20 Test Method for Compressive Strength of Cylindrical Concrete Specimens
C39/C39M-SP - 20 Método de prueba estándar para la determinación de la resistencia a la compresión de especímenes cilíndricos de hormigón
C39/C39M-POR - 20 Método de ensaio padrão para Resistência à compressão de espécimes de concreto cilíndricos
C40/C40M - 20 Test Method for Organic Impurities in Fine Aggregates for Concrete
C40/C40M-SP - 20 Método de prueba estándar para la determinación de impurezas orgánicas en agregados finos para hormigón
C40/C40M-POR - 20 Método de ensaio padrão para Impurezas orgânicas em agregados miúdos para concreto
C42/C42M - 20 Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C42/C42M-POR - 20 Método de ensaio padrão para Obter e ensaiar testemunhos perfurados e vigas serradas de concreto
C50/C50M - 13(2019) Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51 - 20 Terminology Relating to Lime and Limestone (as Used by the Industry)
C55 - 17 Specification for Concrete Building Brick
C56 - 13(2017) Specification for Structural Clay Nonloadbearing Tile
C59/C59M - 00(2020) Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61/C61M - 00(2020) Specification for Gypsum Keene's Cement
C62 - 17 Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
C67/C67M - 20 Test Methods for Sampling and Testing Brick and Structural Clay Tile
C70 - 20 Test Method for Surface Moisture in Fine Aggregate
C71 - 12(2018) Terminology Relating to Refractories
C73 - 17 Specification for Calcium Silicate Brick (Sand-Lime Brick)
C76 - 20 Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C76M - 20 Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
C78/C78M - 18 Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C78/C78M-SP - 18 Método de prueba estándar para determinar la resistencia a la flexión del hormigón (usando una viga simple con carga de tres puntos)
C78/C78M-POR - 18 Método de ensaio padrão para Resistência flexural do concreto (usando viga simples com terceiro ponto de aplicação de carga)
C87/C87M - 17 Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
C88/C88M - 18 Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
C90 - 16a Specification for Loadbearing Concrete Masonry Units
C91/C91M - 18 Specification for Masonry Cement
C92 - 95(2015) Test Methods for Sieve Analysis and Water Content of Refractory Materials
C94/C94M - 20 Specification for Ready-Mixed Concrete
C94/C94M-SP - 20 Especificación de estándar para hormigón elaborado
C94/C94M-POR - 20 Especificação padrão para Concreto pré-misturado
C97/C97M - 18 Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C99/C99M - 18 Test Method for Modulus of Rupture of Dimension Stone
C108 - 46(2018) Symbols for Heat Transmission
C109/C109M - 20b Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens)
C109/C109M-SP - 20b Método de prueba estándar para resistencia a la compresión de morteros de cemento hidráulico (utilizando especímenes cúbicos de 2 in. o [50 mm])
C109/C109M-POR - 20b Método de ensaio padrão para Resistência à compressão de argamassas de cimento hidráulico (usando espécimes de cubo de 2 in. ou [50 mm])
C110 - 20 Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C113 - 14(2019) Test Method for Reheat Change of Refractory Brick
C114 - 18 Test Methods for Chemical Analysis of Hydraulic Cement
C114-RUS - 18 Методы химического анализа гидравлического цемента
C117 - 17 Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
C117-SP - 17 Método de prueba estándar para materiales más finos que un tamiz de 75 μm (N.° 200) en los agregados minerales mediante lavado
C117-POR - 17 Método de ensaio padrão para Materiais mais finos do que a peneira de 75 μm (n.º 200) em agregados minerais por lavagem
C118 - 19 Specification for Concrete Pipe for Irrigation or Drainage
C118M - 19 Specification for Concrete Pipe for Irrigation or Drainage (Metric)
C119 - 20 Terminology Relating to Dimension Stone
C120/C120M - 19 Test Methods for Flexure Testing of Structural and Roofing Slate
C121/C121M - 20 Test Method for Water Absorption of Slate
C123/C123M - 14 Test Method for Lightweight Particles in Aggregate
C125 - 20 Terminology Relating to Concrete and Concrete Aggregates
C126 - 19 Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C127 - 15 Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
C127-SP - 15 Método de prueba estándar para la densidad relativa (gravedad específica) y la absorción del agregado grueso
C127-POR - 15 Método de ensaio padrão para Densidade relativa (grau específico) e absorção de agregados graúdos
C128 - 15 Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
C128-SP - 15 Método de prueba estándar para la densidad relativa (gravedad específica) y la absorción del agregado fino
C128-RU-RU - 15 Стандартный метод испытания для определения относительной плотности (удельного веса) и поглощения мелкого заполнителя
C128-POR - 15 Método de ensaio padrão para Densidade relativa (grau específico) e absorção de agregados miúdos
C129 - 17 Specification for Nonloadbearing Concrete Masonry Units
C131/C131M - 20 Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C133 - 97(2015) Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C134 - 95(2016) Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C135 - 96(2015) Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C136/C136M - 19 Test Method for Sieve Analysis of Fine and Coarse Aggregates
C136/C136M-SP - 19 Método de prueba estándar para análisis granulométrico de agregados finos y gruesos
C136/C136M-POR - 19 Método de ensaio padrão para Análise de peneira de agregados miúdos e graúdos
C138/C138M - 17a Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C138/C138M-SP - 17a Método de Ensayo Normalizado de Densidad (Peso Unitario), Rendimiento, y Contenido de Aire (Gravimétrico) del Concreto
C138/C138M-POR - 17a Método de ensaio padrão para Densidade (peso unitário), rendimento e teor de ar (gravimétrico) do concreto
C139 - 17 Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C140/C140M - 20a Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C141/C141M - 14 Specification for Hydrated Hydraulic Lime for Structural Purposes
C142/C142M - 17 Test Method for Clay Lumps and Friable Particles in Aggregates
C143/C143M - 20 Test Method for Slump of Hydraulic-Cement Concrete
C143/C143M-SP - 20 Método de prueba estándar para el asentamiento del hormigón de cemento hidráulico
C143/C143M-POR - 20 Método de ensaio padrão para Abatimento do concreto de cimento hidráulico
C144 - 18 Specification for Aggregate for Masonry Mortar
C144-SP - 18 Especificación de estándar para agregados de mortero de albañilería
C144-POR - 18 Especificação padrão para Agregados para argamassa de alvenaria
C146 - 94a(2014) Test Methods for Chemical Analysis of Glass Sand
C147 - 86(2020) Test Methods for Internal Pressure Strength of Glass Containers
C148 - 17 Test Methods for Polariscopic Examination of Glass Containers
C149 - 14(2020) Test Method for Thermal Shock Resistance of Glass Containers
C150/C150M - 20 Specification for Portland Cement
C150/C0150M-SP - Especificación de estándar para cemento Portland
C150/C150M-POR - 20 Especificação padrão para Cimento Portland
C151/C151M - 18 Test Method for Autoclave Expansion of Hydraulic Cement
C155 - 97(2018) Classification of Insulating Firebrick
C156 - 20 Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
C157/C157M - 17 Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
C158 - 02(2017) Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
C159 - 06(2016) Specification for Vitrified Clay Filter Blocks
C162 - 05(2015) Terminology of Glass and Glass Products
C163 - 05(2016) Practice for Mixing Thermal Insulating Cement Samples
C165 - 07(2017) Test Method for Measuring Compressive Properties of Thermal Insulations
C166 - 05(2016) Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C167 - 18 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C168 - 19 Terminology Relating to Thermal Insulation
C169 - 16 Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
C170/C170M - 17 Test Method for Compressive Strength of Dimension Stone
C171 - 20 Specification for Sheet Materials for Curing Concrete
C172/C172M - 17 Practice for Sampling Freshly Mixed Concrete
C172/C172M-SP - 17 Práctica estándar para Obtención de muestras de hormigón recién mezclado
C172/C172M-POR - 17 Prática padrão para Amostragem de concreto recém-misturado
C173/C173M - 16 Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C173/C173M-SP - 16 Método de Ensayo Normalizado de Contenido de Aire de Concreto Recién Mezclado por el Método Volumétrico
C173/C173M-POR - 16 Método de ensaio padrão para Teor de ar no concreto recém-misturado pelo Método volumétrico
C174/C174M - 17 Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
C177 - 19 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C179 - 14(2019) Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C181 - 11(2018) Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
C182 - 19 Test Method for Thermal Conductivity of Insulating Firebrick
C183/C183M - 16 Practice for Sampling and the Amount of Testing of Hydraulic Cement
C183/C183M-RUS - 16 Стандартная методика отбора проб и определения объема испытаний гидравлического цемента1
C185 - 20 Test Method for Air Content of Hydraulic Cement Mortar
C187 - 16 Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
C188 - 17 Test Method for Density of Hydraulic Cement
C191 - 19 Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C192/C192M - 19 Practice for Making and Curing Concrete Test Specimens in the Laboratory
C192/C192M-SP - 19 Práctica estándar para la preparación y curado de especímenes de prueba de hormigón en el laboratorio
C192/C192M-POR - 19 Prática padrão para Fazer e curar espécimes de ensaio de concreto no laboratório
C195 - 07(2019) Specification for Mineral Fiber Thermal Insulating Cement
C196 - 00(2019) Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C198 - 09(2019) Test Method for Cold Bonding Strength of Refractory Mortar
C199 - 84(2016) Test Method for Pier Test for Refractory Mortars
C201 - 93(2019) Test Method for Thermal Conductivity of Refractories
C202 - 19 Test Method for Thermal Conductivity of Refractory Brick
C203 - 05a(2017) Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C204 - 18e1 Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C204-RU-RU - 18e1 Стандартные методы испытания тонкости помола гидравлического цемента воздухопроницаемым оборудованием
C206 - 14 Specification for Finishing Hydrated Lime
C207 - 18 Specification for Hydrated Lime for Masonry Purposes
C208 - 12(2017)e2 Specification for Cellulosic Fiber Insulating Board
C209 - 20 Test Methods for Cellulosic Fiber Insulating Board
C210 - 95(2019) Test Method for Reheat Change of Insulating Firebrick
C212 - 20 Specification for Structural Clay Facing Tile
C215 - 19 Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
C216 - 19 Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C217/C217M - 20 Test Method for Weather Resistance of Slate
C219 - 20a Terminology Relating to Hydraulic and Other Inorganic Cements
C220 - 91(2015) Specification for Flat Asbestos-Cement Sheets
C224 - 78(2020) Practice for Sampling Glass Containers
C225 - 85(2014) Test Methods for Resistance of Glass Containers to Chemical Attack
C226 - 19 Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C230/C230M - 20 Specification for Flow Table for Use in Tests of Hydraulic Cement
C231/C231M - 17a Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C231/C231M-SP - 17a Método de Ensayo Normalizado de Contenido de Aire del Concreto Recién Mezclado Mediante el Método por Presión
C231/C231M-POR - 17a Método de ensaio padrão para Teor de ar no concreto recém-misturado pelo Método de pressão
C232/C232M - 20 Test Method for Bleeding of Concrete
C233/C233M - 18 Test Method for Air-Entraining Admixtures for Concrete
C240 - 20 Test Methods for Testing Cellular Glass Insulation Block
C241/C241M - 20 Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C242 - 20b Terminology of Ceramic Whitewares and Related Products
C260/C260M - 10a(2016) Specification for Air-Entraining Admixtures for Concrete
C260/C260M-SP - 10a(2016) Especificación Normalizada para Aditivos Incorporadores de Aire para Concreto
C260/C260M-POR - 10a(2016) Especificação padrão para Aditivos incorporadores de ar para concreto
C266 - 20 Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C267 - 20 Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C270 - 19ae1 Specification for Mortar for Unit Masonry
C271/C271M - 16 Test Method for Density of Sandwich Core Materials
C272/C272M - 18 Test Method for Water Absorption of Core Materials for Sandwich Constructions
C273/C273M - 20 Test Method for Shear Properties of Sandwich Core Materials
C279 - 17 Specification for Chemical-Resistant Masonry Units
C282 - 20 Test Method for Acid Resistance of Porcelain Enamels(Citric Acid Spot Test)
C283 - 13(2017) Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
C285 - 10(2020) Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
C286 - 99(2017) Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
C287 - 98(2012) Specification for Chemical-Resistant Sulfur Mortar
C288 - 20 Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C293/C293M - 16 Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
C294 - 19 Descriptive Nomenclature for Constituents of Concrete Aggregates
C295/C295M - 19 Guide for Petrographic Examination of Aggregates for Concrete
C296/C296M - 00(2015) Specification for Asbestos-Cement Pressure Pipe
C297/C297M - 16 Test Method for Flatwise Tensile Strength of Sandwich Constructions
C297/C297M-RU-RU - 16 Стандартный метод испытаний определения прочности на растяжение перпендикулярно к плоскости «сэндвич»конструкций
C301 - 18 Test Methods for Vitrified Clay Pipe
C302 - 13(2017) Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303 - 10(2016)e1 Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
C305 - 20 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C307 - 18 Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C308 - 18 Practice for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C309 - 19 Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C311/C311M - 18 Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
C315 - 07(2016) Specification for Clay Flue Liners and Chimney Pots
C317/C317M - 00(2019) Specification for Gypsum Concrete
C318/C318M - 13(2018) Specification for Gypsum Formboard
C321 - 00(2012) Test Method for Bond Strength of Chemical-Resistant Mortars
C322 - 09(2018) Practice for Sampling Ceramic Whiteware Clays
C323 - 56(2016) Test Methods for Chemical Analysis of Ceramic Whiteware Clays
C324 - 01(2014) Test Method for Free Moisture in Ceramic Whiteware Clays
C325 - 07(2014) Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
C326 - 09(2018) Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
C329 - 88(2020) Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
C330/C330M - 17a Specification for Lightweight Aggregates for Structural Concrete
C330/C330M-SP - 17a Especificación de estándar para agregados ligeros para hormigón estructural
C330/C330M-POR - 17a Especificação padrão para Agregados leves para concreto estrutural
C331/C331M - 17 Specification for Lightweight Aggregates for Concrete Masonry Units
C332 - 17 Specification for Lightweight Aggregates for Insulating Concrete
C335/C335M - 17 Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C336 - 71(2020) Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
C338 - 93(2019) Test Method for Softening Point of Glass
C341/C341M - 18 Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements
C346 - 87(2018) Test Method for 45-deg Specular Gloss of Ceramic Materials
C348 - 20 Test Method for Flexural Strength of Hydraulic-Cement Mortars
C349 - 18 Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
C356 - 17 Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C357 - 07(2015) Test Method for Bulk Density of Granular Refractory Materials
C359 - 20 Test Method for Early Stiffening of Hydraulic-Cement (Mortar Method)
C361 - 19a Specification for Reinforced Concrete Low-Head Pressure Pipe
C361M - 19 Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
C363/C363M - 16 Test Method for Node Tensile Strength of Honeycomb Core Materials
C364/C364M - 16 Test Method for Edgewise Compressive Strength of Sandwich Constructions
C365/C365M - 16 Test Method for Flatwise Compressive Properties of Sandwich Cores
C365/C365M-RUS - 16 Стандартный метод определения свойств многослойных заполнителей при их сжатии перпендикулярно слоям
C366/C366M - 16 Test Methods for Measurement of Thickness of Sandwich Cores
C366/C366M-RUS - 16 Стандартные методы измерения толщины заполнителей слоистых конструкций
C367/C367M - 16 Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C368 - 88(2020) Test Method for Impact Resistance of Ceramic Tableware
C370 - 12(2020) Test Method for Moisture Expansion of Fired Whiteware Products
C371 - 09(2018) Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
C372 - 94(2020) Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method
C373 - 18 Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
C374 - 14(2018) Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
C375 - 58(2016) Classification of Water Used in Milling of Porcelain Enamel
C384 - 04(2016) Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
C385 - 58(2018) Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
C386 - 93(2012) Practice for Use of Chemical-Resistant Sulfur Mortar
C387/C387M - 17 Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
C390 - 08(2019) Practice for Sampling and Acceptance of Thermal Insulation Lots
C393/C393M - 20 Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
C394/C394M - 16 Test Method for Shear Fatigue of Sandwich Core Materials
C395 - 01(2012) Specification for Chemical-Resistant Resin Mortars
C397 - 00(2012) Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C398 - 98(2012) Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
C399 - 98(2012) Practice for Use of Chemical-Resistant Resin Mortars
C400 - 19 Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C401 - 12(2018) Classification of Alumina and Alumina-Silicate Castable Refractories
C403/C403M - 16 Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C404 - 18 Specification for Aggregates for Masonry Grout
C406/C406M - 15 Specification for Roofing Slate
C408 - 88(2020) Test Method for Thermal Conductivity of Whiteware Ceramics
C410 - 13(2017) Specification for Industrial Floor Brick
C411 - 19 Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C412 - 19 Specification for Concrete Drain Tile
C412M - 19 Specification for Concrete Drain Tile (Metric)
C413 - 18 Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C414 - 03(2012) Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C416 - 97(2018) Classification of Silica Refractory Brick
C417 - 05(2015) Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C418 - 20 Test Method for Abrasion Resistance of Concrete by Sandblasting
C419 - 20 Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C421 - 08(2020) Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
C423 - 17 Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C424 - 93(2020) Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
C425 - 04(2018) Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C425-SP - 04(2018)
C425-POR - 04(2018) Especificação padrão para Juntas de compressão para tubo cerâmico vitrificado e acessórios
C426 - 16 Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C428/C428M - 05(2019) Specification for Asbestos-Cement Nonpressure Sewer Pipe
C429 - 16 Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
C430 - 17 Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
C441/C441M - 17 Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
C443 - 20 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C443M - 20 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
C444 - 17 Specification for Perforated Concrete Pipe
C444M - 17 Specification for Perforated Concrete Pipe (Metric)
C447 - 15 Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C448 - 88(2016) Test Methods for Abrasion Resistance of Porcelain Enamels
C449 - 07(2019) Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C450 - 18 Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
C451 - 19 Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C452 - 19e1 Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C454 - 10(2017) Test Method for Disintegration of Carbon Refractories by Alkali
C455 - 07(2018) Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
C456 - 18 Test Method for Hydration Resistance of Basic Bricks and Shapes
C457/C457M - 16 Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
C458/C458M - 98(2019) Test Method for Organic Fiber Content of Asbestos-Cement Products
C459/C459M - 97(2019) Test Methods for Asbestos-Cement Flat Products
C461 - 17 Test Methods for Mastics and Coatings Used With Thermal Insulation
C465 - 19 Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C465-RU-RU - 19 Стандартные технические условия на технологические добавки для использования в производстве гидравлического цемента
C466 - 03(2012) Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
C467 - 14(2018) Classification of Mullite Refractories
C469/C469M - 14 Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
C470/C470M - 15 Specification for Molds for Forming Concrete Test Cylinders Vertically
C471M - 20a Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
C472 - 20 Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
C473 - 19 Test Methods for Physical Testing of Gypsum Panel Products
C474 - 15(2020) Test Methods for Joint Treatment Materials for Gypsum Board Construction
C475/C475M - 17 Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C476 - 20 Specification for Grout for Masonry
C478/C478M - 20 Specification for Circular Precast Reinforced Concrete Manhole Sections
C479 - 04(2017) Specification for Vitrified Clay Liner Plates
C480/C480M - 16 Test Method for Flexure Creep of Sandwich Constructions
C481 - 99(2016) Test Method for Laboratory Aging of Sandwich Constructions
C482 - 20 Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
C484 - 20 Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
C485 - 16 Test Method for Measuring Warpage of Ceramic Tile
C488 - 16 Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C490/C490M - 17 Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C492 - 92(2017)e1 Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C494/C494M - 19 Specification for Chemical Admixtures for Concrete
C494/C494M-SP - 19 Especificación de estándar para aditivos químicos para hormigón
C494/C494M-POR - 19 Especificação padrão para Aditivos químicos para concreto
C495/C495M - 12(2019) Test Method for Compressive Strength of Lightweight Insulating Concrete
C496/C496M - 17 Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C496/C496M-SP - 17 Método de prueba estándar para Determinación de la resistencia a la tracción por compresión diametral de especímenes cilíndricos de hormigón
C496/C496M-POR - 17 Método de ensaio padrão para Resistência à tração por compressão diametral de espécimes de concreto cilíndricos
C497M - 20a Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
C497 - 20e1 Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
C499 - 20 Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
C500/C500M - 07(2019) Test Methods for Asbestos-Cement Pipe
C501 - 84(2015) Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
C502 - 16 Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
C503/C503M - 15 Specification for Marble Dimension Stone
C505 - 19 Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
C505M - 19 Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
C506M - 20 Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
C506 - 20e1 Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C507 - 20 Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C507M - 20 Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
C508/C508M - 00(2015) Specification for Asbestos-Cement Underdrain Pipe
C509 - 06(2015) Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C510 - 16 Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C511 - 19 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C512/C512M - 15 Test Method for Creep of Concrete in Compression
C513/C513M - 11(2019) Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
C514 - 04(2020) Specification for Nails for the Application of Gypsum Board
C515 - 13(2018) Specification for Chemical-Resistant Ceramic Tower Packings
C516 - 19 Specification for Vermiculite Loose Fill Thermal Insulation
C518 - 17 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C520 - 15(2020) Test Methods for Density of Granular Loose Fill Insulations
C522 - 03(2016) Test Method for Airflow Resistance of Acoustical Materials
C530 - 13(2017) Specification for Structural Clay Nonloadbearing Screen Tile
C531 - 18 Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C533 - 17 Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534/C534M - 20a Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C535 - 16 Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C536 - 83(2018) Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
C537 - 87(2018) Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
C538 - 83(2018) Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels
C539 - 84(2016) Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
C541/C541M - 98(2019) Specification for Linings for Asbestos-Cement Pipe
C542 - 05(2017) Specification for Lock-Strip Gaskets
C544 - 18 Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
C545 - 97(2018) Classification of Zircon Refractories
C547 - 19 Specification for Mineral Fiber Pipe Insulation
C549 - 18 Specification for Perlite Loose Fill Insulation
C550 - 15(2020) Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C551/C551M - 07(2019) Specification for Asbestos-Cement Fiberboard Insulating Panels
C552 - 17e1 Specification for Cellular Glass Thermal Insulation
C553 - 13(2019) Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C554 - 93(2020) Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
C556 - 16(2020) Test Method for Resistance of Overglaze Decorations to Attack by Detergents
C557 - 03(2017) Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
C559 - 16(2020) Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
C560 - 20 Test Methods for Chemical Analysis of Graphite
C561 - 16 Test Method for Ash in a Graphite Sample
C562 - 15 Test Method for Moisture in a Graphite Sample
C563 - 20 Guide for Approximation of Optimum SO3 in Hydraulic Cement
C564 - 20a Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C565 - 15 Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
C566 - 19 Test Method for Total Evaporable Moisture Content of Aggregate by Drying
C566-SP - 19 Método de prueba estándar para calcular el contenido total de humedad evaporable de los agregados mediante secado
C566-POR - 19 Método de ensaio padrão para Teor total de umidade evaporável do agregado por secagem
C567/C567M - 19 Test Method for Determining Density of Structural Lightweight Concrete
C567/C567M-SP - 19 Método de prueba estándar para determinar la densidad del hormigón estructural liviano
C567/C567M-POR - 19 Método de ensaio padrão para Determinar a densidade do concreto leve estrutural
C568/C568M - 15 Specification for Limestone Dimension Stone
C577 - 19 Test Method for Permeability of Refractories
C578 - 19 Specification for Rigid, Cellular Polystyrene Thermal Insulation
C579 - 18 Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C580 - 18 Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C581 - 20 Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C582 - 09(2016) Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
C583 - 15 Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C584 - 81(2016) Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
C585 - 10(2016) Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
C586 - 19 Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
C587 - 04(2018) Specification for Gypsum Veneer Plaster
C591 - 20 Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C592 - 16 Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
C593 - 19 Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C595/C595M - 20 Specification for Blended Hydraulic Cements
C595/C595M-POR - 20 Especificação padrão para Cimentos hidráulicos misturados
C595/C595M-SP - 20 Especificación de estándar para cementos hidráulicos mezclados
C596 - 18 Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
C597 - 16 Test Method for Pulse Velocity Through Concrete
C598 - 93(2019) Test Method for Annealing Point and Strain Point of Glass by Beam Bending
C602 - 20 Specification for Agricultural Liming Materials
C603 - 14(2019) Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C604 - 18 Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C607 - 88(2016) Practice for Coking Large Shapes of Carbon-Bearing Materials
C609 - 20 Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
C610 - 17 Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C611 - 98(2016) Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
C612 - 14(2019) Specification for Mineral Fiber Block and Board Thermal Insulation
C613 - 19 Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
C614 - 20 Test Method for Alkali Resistance of Porcelain Enamels
C615/C615M - 18e1 Specification for Granite Dimension Stone
C616/C616M - 15 Specification for Quartz-Based Dimension Stone
C617/C617M - 15 Practice for Capping Cylindrical Concrete Specimens
C617/C617M-SP - 15 Práctica estándar para la obturación de especímenes cilíndricos de hormigón
C617/C617M-POR - 15 Prática padrão para Capeamento de espécimes de concreto cilíndricos
C618 - 19 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C618-SP - 19 Especificación estándar para Ceniza volante de carbón y puzolana natural cruda o calcinada para su uso en hormigón
C618-RUS - 19 Стандартная спецификация на летучую золу угля и сырой или прокаленный природный пуццолан для использования в бетоне
C618-POR - 19 Especificação padrão para Cinza volante de carvão e pozolana natural pura ou calcinada para uso em concreto
C621 - 09(2018) Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C623 - 92(2015) Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
C625 - 15 Practice for Reporting Irradiation Results on Graphite
C627 - 18 Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
C629/C629M - 15 Specification for Slate Dimension Stone
C631 - 09(2020) Specification for Bonding Compounds for Interior Gypsum Plastering
C632 - 88(2016) Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
C633 - 13(2017) Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
C634 - 13e1 Terminology Relating to Building and Environmental Acoustics
C635/C635M - 17 Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636/C636M - 19 Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C637 - 20 Specification for Aggregates for Radiation-Shielding Concrete
C638 - 20 Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C639 - 15(2020) Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C641 - 17 Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
C642 - 13 Test Method for Density, Absorption, and Voids in Hardened Concrete
C645 - 18 Specification for Nonstructural Steel Framing Members
C647 - 19 Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
C648 - 20 Test Method for Breaking Strength of Ceramic Tile
C650 - 20 Test Method for Determination of Resistance to Chemical Substances
C651 - 20 Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
C652 - 19b Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C653 - 17 Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C654 - 19 Specification for Porous Concrete Pipe
C654M - 19 Specification for Porous Concrete Pipe (Metric)
C655 - 19a Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C655M - 19a Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
C656 - 17 Specification for Structural Insulating Board, Calcium Silicate
C657 - 19 Test Method for D-C Volume Resistivity of Glass
C658 - 98(2012) Specification for Chemical-Resistant Resin Grouts for Brick or Tile
C660 - 81(2020) Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
C661 - 15 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C662 - 16 Specification for Impervious Graphite Pipe and Threading
C664 - 10(2020) Test Methods for Thickness of Diffusion Coating
C665 - 17 Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C666/C666M - 15 Test Method for Resistance of Concrete to Rapid Freezing and Thawing
C667 - 17 Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
C670 - 15 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
C670-RUS - 15 СТАНДАРТНАЯ МЕТОДИКА ПОДГОТОВКИ ДАННЫХ ПО ПРЕЦИЗИОННОСТИ И СИСТЕМАТИЧЕСКОЙ ПОГРЕШНОСТИ ДЛЯ МЕТОДОВ ИСПЫТАНИЙ СТРОИТЕЛЬНЫХ МАТЕРИАЛОВ
C672/C672M - 12 Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
C673 - 97(2018) Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C674 - 13(2018) Test Methods for Flexural Properties of Ceramic Whiteware Materials
C675 - 91(2016) Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
C676 - 04(2019) Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
C679 - 15 Test Method for Tack-Free Time of Elastomeric Sealants
C680 - 19 Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C681 - 14(2019) Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C685/C685M - 17 Specification for Concrete Made by Volumetric Batching and Continuous Mixing
C685/C685M-SP - 17 Especificación estándar para hormigón preparado mediante dosificación volumétrica y mezcla continua
C685/C685M-POR - 17 Especificação padrão para Concreto feito por dosagem volumétrica e mistura contínua
C686 - 17 Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
C687 - 18 Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
C688 - 14 Specification for Functional Additions for Use in Hydraulic Cements
C689 - 09(2019) Test Method for Modulus of Rupture of Unfired Clays
C690 - 09(2019) Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
C692 - 13(2018) Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C693 - 93(2019) Test Method for Density of Glass by Buoyancy
C694 - 90a(2016) Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
C695 - 15(2020) Test Method for Compressive Strength of Carbon and Graphite
C696 - 19 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
C697 - 16 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
C698 - 16 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
C700 - 18 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C702/C702M - 18 Practice for Reducing Samples of Aggregate to Testing Size
C702/C702M-SP - 18 Práctica estándar para reducir muestras de agregado a tamaño para pruebas
C702/C702M-POR - 18 Prática padrão para Reduzir amostras de agregados para tamanho de ensaio
C703 - 72(2016) Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
C704/C704M - 15e1 Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C706 - 19 Specification for Limestone for Animal Feed Use
C708 - 16 Specification for Nuclear-Grade Beryllium Oxide Powder
C711 - 14 Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712 - 14 Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C712-RU-RU - 14 Стандартный метод испытания для определения образования пузырей однокомпонентных эластомерных герметиков с испаряющимся растворителем
C714 - 17 Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
C715 - 90(2016) Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
C716 - 06(2020) Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C717 - 19 Terminology of Building Seals and Sealants
C719 - 14(2019) Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C721 - 20 Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
C722 - 18 Specification for Chemical-Resistant Monolithic Floor Surfacings
C723 - 98(2012) Practice for Chemical-Resistant Resin Grouts for Brick or Tile
C724 - 91(2020) Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
C726 - 17 Specification for Mineral Wool Roof Insulation Board
C727 - 19 Practice for Installation and Use of Reflective Insulation in Building Constructions
C728 - 17a Specification for Perlite Thermal Insulation Board
C729 - 11(2016) Test Method for Density of Glass by the Sink-Float Comparator
C730 - 98(2013) Test Method for Knoop Indentation Hardness of Glass
C731 - 15 Test Method for Extrudability, After Package Aging, of Latex Sealants
C731-RUS - 15 Стандартный метод определения шприцуемости латексных герметиков после циклического старения
C732 - 17 Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734 - 15(2019) Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C735 - 04(2019) Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
C736 - 12(2017) Test Method for Extension-Recovery and Adhesion of Latex Sealants
C737 - 13 Specification for Limestone for Dusting of Coal Mines
C738 - 94(2020) Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
C739 - 17 Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
C740/C740M - 13(2019) Guide for Evacuated Reflective Insulation In Cryogenic Service
C743 - 87(2018) Test Method for Continuity of Porcelain Enamel Coatings
C744 - 16 Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C747 - 16 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
C748 - 20 Test Method for Rockwell Hardness of Graphite Materials
C749 - 15(2020) Test Method for Tensile Stress-Strain of Carbon and Graphite
C750 - 18 Specification for Nuclear-Grade Boron Carbide Powder
C751 - 20 Specification for Nuclear-Grade Boron Carbide Pellets
C752 - 18 Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
C753 - 16a Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
C754 - 20 Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C755 - 20 Practice for Selection of Water Vapor Retarders for Thermal Insulation
C756 - 87(2016) Test Method for Cleanability of Surface Finishes
C757 - 16e1 Specification for Nuclear-Grade Plutonium Dioxide Powder for Light Water Reactors
C758 - 18 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
C759 - 18 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
C760 - 90(2020) Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
C761 - 18 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
C764 - 19 Specification for Mineral Fiber Loose-Fill Thermal Insulation
C765 - 97(2015) Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C767 - 20 Test Method for Thermal Conductivity of Carbon Refractories
C769 - 15(2020)e1 Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus
C770 - 16(2020) Test Method for Measurement of Glass Stress—Optical Coefficient
C771 - 14(2019) Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
C772 - 03(2019) Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C773 - 88(2020) Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
C774 - 88(2016) Test Method for Yield Strength of Enameling Steels After Straining and Firing
C776 - 17 Specification for Sintered Uranium Dioxide Pellets for Light Water Reactors
C777 - 04(2019) Test Method for Sulfide Resistance of Ceramic Decorations on Glass
C778 - 17 Specification for Standard Sand
C779/C779M - 19 Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
C780 - 20 Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C781 - 20 Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components
C782 - 13(2018) Test Method for Softness of Preformed Tape Sealants
C783 - 85(2020) Practice for Core Sampling of Graphite Electrodes
C784 - 20 Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
C785 - 08(2015) Specification for Nuclear-Grade Aluminum Oxide Pellets
C786/C786M - 17 Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
C787 - 20 Specification for Uranium Hexafluoride for Enrichment
C788 - 03(2015) Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals
C791 - 19 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
C792 - 15(2020) Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793 - 05(2017) Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C794 - 18 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C795 - 08(2018) Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C796/C796M - 19 Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
C799 - 19 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
C800 - 19 Specification for Fibrous Glass Blanket Insulation (Aircraft Type)
C802 - 14 Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
C803/C803M - 18 Test Method for Penetration Resistance of Hardened Concrete
C805/C805M - 18 Test Method for Rebound Number of Hardened Concrete
C806 - 18 Test Method for Restrained Expansion of Expansive Cement Mortar
C807 - 20 Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C808 - 75(2016) Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
C809 - 19 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
C810 - 90(2016) Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
C813 - 20 Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
C816 - 15(2020)e1 Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method
C821 - 14 Specification for Lime for Use with Pozzolans
C822 - 20 Terminology Relating to Concrete Pipe and Related Products
C823/C823M - 12(2017) Practice for Examination and Sampling of Hardened Concrete in Constructions
C824 - 91(2020) Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by Dilatometer Method
C825 - 19 Specification for Precast Concrete Barriers
C827/C827M - 16 Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
C828 - 11(2016) Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
C829 - 81(2015) Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
C830 - 00(2016) Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C831 - 18 Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C832 - 00(2015) Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
C833 - 17 Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors
C834 - 17 Specification for Latex Sealants
C835 - 06(2020) Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
C836/C836M - 18 Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C837 - 09(2019) Test Method for Methylene Blue Index of Clay
C838 - 16 Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
C839 - 82(2020) Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
C840 - 20 Specification for Application and Finishing of Gypsum Board
C841 - 03(2018) Specification for Installation of Interior Lathing and Furring
C842 - 05(2015) Specification for Application of Interior Gypsum Plaster
C843 - 17 Specification for Application of Gypsum Veneer Plaster
C844 - 15 Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C845/C845M - 18 Specification for Expansive Hydraulic Cement
C845/C845M-SP - 18
C845/C845M-POR - 18 Especificação padrão para Cimento hidráulico expansivo
C846 - 16 Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
C847 - 18 Specification for Metal Lath
C848 - 88(2020) Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
C849 - 88(2020) Test Method for Knoop Indentation Hardness of Ceramic Whitewares
C852/C852M - 17 Guide for Design Criteria for Plutonium Gloveboxes
C856/C856M - 20 Practice for Petrographic Examination of Hardened Concrete
C857 - 19 Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
C858 - 19 Specification for Underground Precast Concrete Utility Structures
C859 - 14b Terminology Relating to Nuclear Materials
C860 - 15(2019) Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C861 - 93(2020) Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C862 - 16(2020) Practice for Preparing Refractory Concrete Specimens by Casting
C863 - 00(2016) Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C864 - 05(2019) Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C865 - 17 Practice for Firing Refractory Concrete Specimens
C866 - 11(2016) Test Method for Filtration Rate of Ceramic Whiteware Clays
C867 - 94(2014) Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
C869/C869M - 11(2016) Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
C870 - 11(2017) Practice for Conditioning of Thermal Insulating Materials
C871 - 18 Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C872 - 10(2015) Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
C873/C873M - 15 Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
C874 - 20 Test Method for Rotary Slag Testing of Refractory Materials
C876 - 15 Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
C877 - 16 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C877M - 16 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
C878/C878M - 14a Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
C879 - 03(2019) Test Methods for Release Papers Used with Preformed Tape Sealants
C880/C880M - 18 Test Method for Flexural Strength of Dimension Stone
C881/C881M - 20a Specification for Epoxy-Resin-Base Bonding Systems for Concrete
C882/C882M - 20 Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
C884/C884M - 16 Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
C885 - 87(2020) Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance
C886 - 98(2015) Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
C887 - 20 Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C888 - 18 Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C889 - 18 Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C890 - 19 Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
C891 - 20 Practice for Installation of Underground Precast Concrete Utility Structures
C892 - 19 Specification for High-Temperature Fiber Blanket Thermal Insulation
C895 - 87(2019) Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
C896 - 20e1 Terminology Relating to Clay Products
C897 - 15(2020) Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
C898/C898M - 09(2017) Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
C899 - 79(2018) Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
C900 - 19 Test Method for Pullout Strength of Hardened Concrete
C901 - 18 Specification for Prefabricated Masonry Panels
C902 - 20 Specification for Pedestrian and Light Traffic Paving Brick
C903 - 15(2020) Practice for Preparing Refractory Specimens by Cold Gunning
C904 - 01(2018) Terminology Relating to Chemical-Resistant Nonmetallic Materials
C905 - 01(2012) Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C907 - 17(2018) Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C908 - 15 Test Method for Yield Strength of Preformed Tape Sealants
C909 - 18 Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C910 - 16 Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C911 - 19 Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
C912 - 17 Practice for Designing a Process for Cleaning Technical Glasses
C913 - 18 Specification for Precast Concrete Water and Wastewater Structures
C914 - 09(2015) Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C915 - 79(2018) Specification for Precast Reinforced Concrete Crib Wall Members
C916 - 20 Specification for Adhesives for Duct Thermal Insulation
C917/C917M - 18 Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength
C918/C918M - 20 Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
C919 - 19 Practice for Use of Sealants in Acoustical Applications
C920 - 18 Specification for Elastomeric Joint Sealants
C921 - 10(2015) Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C922 - 14 Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C923/C923M - 20 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
C925 - 09(2019) Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
C926 - 20b Specification for Application of Portland Cement-Based Plaster
C927 - 80(2019)e1 Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
C928/C928M - 20a Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
C929 - 14(2019) Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
C930 - 19 Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C932 - 06(2019) Specification for Surface-Applied Bonding Compounds for Exterior Plastering
C933 - 18 Specification for Welded Wire Lath
C935 - 19 Specification for General Requirements for Prestressed Concrete Poles Statically Cast
C936/C936M - 20 Specification for Solid Concrete Interlocking Paving Units
C937 - 16 Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
C938 - 19 Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
C939/C939M - 16a Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C940 - 16 Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
C941 - 16 Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
C942 - 15 Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C943 - 17 Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
C944/C944M - 19 Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
C945 - 05(2017) Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C946 - 18 Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C947 - 03(2016) Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
C948 - 81(2016) Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
C949 - 80(2020) Test Method for Porosity in Vitreous Whitewares by Dye Penetration
C950/C950M - 08(2017) Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C953 - 17 Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C954 - 18 Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C955 - 18e1 Specification for Cold-Formed Steel Structural Framing Members
C956 - 04(2019) Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
C957/C957M - 17 Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
C958 - 92(2014) Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
C961 - 15 Test Method for Lap Shear Strength of Sealants
C963 - 00(2017) Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C964 - 20 Guide for Lock-Strip Gasket Glazing
C965 - 96(2017) Practice for Measuring Viscosity of Glass Above the Softening Point
C967 - 20 Specification for Uranium Ore Concentrate
C968 - 19 Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C969M - 19 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
C969 - 19 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C972 - 18 Test Method for Compression-Recovery of Tape Sealant
C973 - 87(2020) Practice for Preparing Test Specimens from Basic Refractory Gunning Products by Pressing
C974 - 87(2020) Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C975 - 87(2020) Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C977 - 18 Specification for Quicklime and Hydrated Lime for Soil Stabilization
C978 - 04(2019) Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
C979/C979M - 16 Specification for Pigments for Integrally Colored Concrete
C980 - 17 Specification for Industrial Chimney Lining Brick
C981 - 20 Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
C985M - 19 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
C985 - 19 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C987 - 10(2019) Test Method for Vapor Attack on Refractories for Furnace Superstructures
C989/C989M - 18a Specification for Slag Cement for Use in Concrete and Mortars
C989/C989M-SP - 18a Especificación de estándar para cemento de escoria para uso en hormigón y morteros
C989/C989M-POR - 18a Especificação padrão para Cimento de escórias para uso em concreto e argamassas
C990 - 09(2019) Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C990M - 09(2019) Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
C991 - 16 Specification for Flexible Fibrous Glass Insulation for Metal Buildings
C992 - 20a Specification for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
C993 - 97(2012) Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors
C996 - 20 Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U
C998 - 17 Practice for Sampling Surface Soil for Radionuclides
C999 - 17 Practice for Soil Sample Preparation for the Determination of Radionuclides

C1000-C1999[edit]

C1000 - 19 Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
C1001 - 19 Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
C1002 - 20 Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1005 - 20 Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
C1006/C1006M - 20a Test Method for Splitting Tensile Strength of Masonry Units
C1007 - 20 Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
C1009 - 13a Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
C1012/C1012M - 18b Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1014 - 17 Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
C1015 - 17 Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1016 - 14 Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1017/C1017M - 13e1 Specification for Chemical Admixtures for Use in Producing Flowing Concrete
C1017/C1017M-SP - 13e1 Especificación Normalizada para Aditivos Químicos para Uso en la Producción de Concreto Fluido
C1017/C1017M-POR - 13e1 Especificação padrão para Aditivos químicos para uso na produção de concreto fluido
C1019 - 20 Test Method for Sampling and Testing Grout for Masonry
C1021 - 08(2019) Practice for Laboratories Engaged in Testing of Building Sealants
C1022 - 17 Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
C1023 - 10(2018) Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
C1025 - 15(2020) Test Method for Modulus of Rupture in Bending of Electrode Graphite
C1026 - 13(2018) Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling
C1027 - 19 Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
C1029 - 20 Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1030 - 10(2018) Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
C1031 - 11(2016) Specification for Nuclear-Grade Aluminum Oxide Powder
C1032 - 18 Specification for Woven Wire Plaster Base
C1036 - 16 Specification for Flat Glass
C1037 - 16 Practice for Inspection of Underground Precast Concrete Utility Structures
C1038/C1038M - 19 Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
C1039 - 85(2020)e1 Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
C1040/C1040M - 16a Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
C1040/C1040M-RU-RU - 16a Стандартные методы испытания для определения плотности уложенного в конструкцию незатвердевшего и затвердевшего бетона, включая бетон, уплотненный катком, с использованием ядерных методов
C1043 - 19 Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044 - 16(2020) Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
C1045 - 19 Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046 - 95(2013) Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1047 - 19 Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1048 - 18 Specification for Heat-Strengthened and Fully Tempered Flat Glass
C1052 - 20 Practice for Bulk Sampling of Liquid Uranium Hexafluoride
C1054 - 18 Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1055 - 20 Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
C1057 - 17 Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
C1058/C1058M - 10(2015) Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1059/C1059M - 13 Specification for Latex Agents for Bonding Fresh To Hardened Concrete
C1060 - 11a(2015) Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1062 - 00(2014) Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
C1063 - 20a Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1064/C1064M - 17 Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
C1064/C1064M-SP - 17 Método de prueba estándar para la determinación de la temperatura del hormigón de cemento hidráulico recién mezclado
C1064/C1064M-POR - 17 Método de ensaio padrão para Temperatura de concreto de cimento hidráulico recém misturado
C1065 - 08(2015) Specification for Nuclear-Grade Zirconium Oxide Powder
C1066 - 09(2015) Specification for Nuclear Grade Zirconium Oxide Pellets
C1067 - 20 Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
C1068 - 15 Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
C1069 - 09(2014) Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
C1070 - 01(2020) Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
C1071 - 19 Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
C1072 - 19 Test Methods for Measurement of Masonry Flexural Bond Strength
C1073 - 18 Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali
C1074 - 19e1 Practice for Estimating Concrete Strength by the Maturity Method
C1075 - 17 Practices for Sampling Uranium-Ore Concentrate
C1076 - 09(2015) Specification for Nuclear Grade Hafnium Oxide Pellets
C1077 - 17 Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
C1077-SP - 17 Práctica estándar para los organismos de pruebas de hormigón y agregados de hormigón para uso en la construcción y criterios de evaluación de los organismos de pruebas
C1077-POR - 17 Prática padrão para Centros que ensaiem concreto e agregados de concreto para uso em construções e critérios para avaliação de centros de ensaios
C1083 - 06(2020)e1 Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1084 - 19 Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
C1086 - 20 Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
C1087 - 16 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1088 - 20 Specification for Thin Veneer Brick Units Made From Clay or Shale
C1089 - 19 Specification for Spun Cast Prestressed Concrete Poles
C1090/C1090M - 15 Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
C1091 - 03a(2018) Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
C1093 - 19 Practice for Accreditation of Testing Agencies for Masonry
C1096/C1096M - 07(2019) Test Method for Determination of Wood Fiber in Asbestos Cement
C1097 - 19 Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures
C1098 - 08(2015) Specification for Nuclear-Grade Hafnium Oxide Powder
C1099 - 07(2019) Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1101/C1101M - 06(2017) Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C1103M - 19 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
C1103 - 19 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C1104/C1104M - 19 Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1105 - 08a(2016) Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
C1106 - 00(2012) Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
C1107/C1107M - 20 Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
C1108 - 17 Test Method for Plutonium by Controlled-Potential Coulometry
C1109 - 10(2015) Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1111 - 10(2020) Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1113/C1113M - 09(2019) Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1114 - 06(2019) Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1115 - 17 Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1116/C1116M - 10a(2015) Specification for Fiber-Reinforced Concrete
C1119/C1119M - 90(2015) Test Method for Vacuum Drainage of Asbestos-Cement Mixes
C1120/C1120M - 98(2019) Test Method for Wash Test of Asbestos
C1121/C1121M - 04(2015) Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
C1122/C1122M - 90(2015) Test Method for Wet Volume of Asbestos
C1123/C1123M - 90(2015) Test Method for Compressibility and Recovery of Asbestos
C1124/C1124M - 90(2015) Test Method for Kerosene Retention of Asbestos
C1125 - 89(2015) Test Method for Penetration Index of Asbestos
C1126 - 19 Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
C1127/C1127M - 15 Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
C1128 - 18 Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
C1129 - 17 Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
C1130 - 17 Practice for Calibration of Thin Heat Flux Transducers
C1131 - 20 Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C1133/C1133M - 10(2018) Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
C1134 - 17 Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
C1135 - 19 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1136 - 17a Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1138M - 19 Test Method for Abrasion Resistance of Concrete (Underwater Method)
C1140/C1140M - 11(2019) Practice for Preparing and Testing Specimens from Shotcrete Test Panels
C1141/C1141M - 15 Specification for Admixtures for Shotcrete
C1145 - 19 Terminology of Advanced Ceramics
C1146 - 09(2018) Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
C1147 - 14 Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
C1149 - 17 Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
C1152/C1152M - 20 Test Method for Acid-Soluble Chloride in Mortar and Concrete
C1153 - 10(2015) Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1154 - 06(2016) Terminology for Non-Asbestos Fiber-Reinforced Cement Products
C1155 - 95(2013) Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1156 - 18 Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
C1157/C1157M - 20 Performance Specification for Hydraulic Cement
C1157/C1157M-SP - 20 Especificación de desempeño estándar para cemento hidráulico
C1157/C1157M-POR - 20 Especificação de desempenho padrão para Cimento hidráulico
C1159 - 98(2012) Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
C1160 - 97(2012) Specification for Chemical-Resistant Carbon Brick
C1161 - 18 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1162/C1162M - 90(2015) Test Method for Loose Density of Asbestos
C1163 - 14 Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
C1164 - 14 Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
C1165 - 17 Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
C1166 - 06(2016) Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1167 - 11(2017) Specification for Clay Roof Tiles
C1168 - 15 Practice for Preparation and Dissolution of Plutonium Materials for Analysis
C1169 - 97(2012) Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
C1170/C1170M - 20 Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
C1171 - 16 Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1172 - 19 Specification for Laminated Architectural Flat Glass
C1173 - 18 Specification for Flexible Transition Couplings for Underground Piping Systems
C1174 - 20 Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
C1176/C1176M - 20 Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
C1177/C1177M - 17 Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178/C1178M - 18 Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
C1179 - 15 Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
C1180 - 19 Terminology of Mortar and Grout for Unit Masonry
C1181/C1181M - 17 Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
C1182 - 09(2019) Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
C1183/C1183M - 13(2018) Test Method for Extrusion Rate of Elastomeric Sealants
C1184 - 18e1 Specification for Structural Silicone Sealants
C1185 - 08(2016) Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
C1186 - 08(2016) Specification for Flat Fiber-Cement Sheets
C1187 - 20a Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
C1189 - 11(2018) Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
C1190 - 18 Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1193 - 16 Guide for Use of Joint Sealants
C1194 - 19 Test Method for Compressive Strength of Architectural Cast Stone
C1195 - 19a Test Method for Absorption of Architectural Cast Stone
C1196 - 20 Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
C1197 - 20 Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
C1198 - 20 Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
C1199 - 14 Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1201/C1201M - 20 Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1202 - 19 Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
C1203 - 04(2019) Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
C1204 - 14 Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
C1205 - 07(2012) Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
C1207 - 10(2018) Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
C1208/C1208M - 18 Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
C1210 - 18 Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1211 - 18 Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1214M - 19 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
C1214 - 19 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C1215 - 18 Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
C1216/C1216M - 13 Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1216/C1216M-RU-RU - 13 Стандартный метод испытания на адгезию и когезию однокомпонентных эластомерных герметиков с испаряющимся растворителем
C1217 - 00(2020) Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
C1218/C1218M - 20 Test Method for Water-Soluble Chloride in Mortar and Concrete
C1218/C1218M-SP - 20 Método de prueba estándar para cloruro soluble en agua en mortero y hormigón
C1218/C1218M-POR - 20 Método de ensaio padrão para Cloreto solúvel em água em argamassa e concreto
C1220 - 17 Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
C1221 - 10(2018) Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
C1222 - 19a Practice for Evaluation of Laboratories Testing Hydraulic Cement
C1223 - 19 Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1224 - 15(2020) Specification for Reflective Insulation for Building Applications
C1225 - 08(2016) Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
C1227 - 20 Specification for Precast Concrete Septic Tanks
C1228 - 96(2015) Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
C1229 - 94(2015) Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
C1230 - 96(2015) Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
C1231/C1231M - 15 Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
C1231/C1231M-SP - 15 Práctica estándar para el uso de cabezales sin adhesión en la determinación de la resistencia a la compresión de especímenes cilíndricos de hormigón endurecido
C1231/C1231M-POR - 15 Prática padrão para Uso de tampas não acopladas na determinação de resistência à compressão de espécimes de concreto cilíndrico endurecido
C1232 - 20 Terminology for Masonry
C1233 - 15 Practice for Determining Equivalent Boron Contents of Nuclear Materials
C1234 - 11(2019) Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
C1238 - 97(2012) Guide for Installation of Walk-Through Metal Detectors
C1239 - 13(2018) Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1240 - 20 Specification for Silica Fume Used in Cementitious Mixtures
C1240-SP - 20 Especificación de estándar para humo de sílice utilizado en mezclas cementantes
C1240-POR - 20 Especificação padrão para Sílica ativa usada em misturas cimentícias
C1241 - 14 Test Method for Volume Shrinkage of Latex Sealants During Cure
C1242 - 20 Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
C1243 - 93(2015)e2 Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
C1244/C1244M - 20 Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1246 - 17 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247 - 20 Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248 - 18 Test Method for Staining of Porous Substrate by Joint Sealants
C1249 - 18 Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1252 - 17 Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
C1253 - 14(2019) Test Method for Determining the Outgassing Potential of Sealant Backing
C1254 - 18 Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
C1255 - 18 Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
C1256 - 93(2019) Practice for Interpreting Glass Fracture Surface Features
C1257 - 15 Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1257-RU-RU - 15 Стандартный метод испытания на ускоренное старение в атмосферных условиях герметиков с испаряющимся растворителем
C1258 - 19 Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
C1259 - 15 Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1260 - 14 Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
C1261 - 13(2017)e1 Specification for Firebox Brick for Residential Fireplaces
C1262/C1262M - 18 Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
C1263 - 95(2015) Test Method for Thermal Integrity of Flexible Water Vapor Retarders
C1264 - 19 Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
C1265 - 17 Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266 - 17 Test Method for Flow Characteristics of Preformed Tape Sealants
C1267 - 17 Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
C1268 - 15 Test Method for Quantitative Determination of 241Am in Plutonium by Gamma-Ray Spectrometry
C1269 - 97(2012) Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
C1270 - 97(2012) Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
C1271 - 99(2020) Test Method for X-ray Spectrometric Analysis of Lime and Limestone
C1272 - 17 Specification for Heavy Vehicular Paving Brick
C1273 - 18 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274 - 12(2020) Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275 - 18 Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
C1277 - 20 Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1278/C1278M - 17 Specification for Fiber-Reinforced Gypsum Panel
C1279 - 13(2019) Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
C1280 - 18 Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
C1281 - 16 Specification for Preformed Tape Sealants for Glazing Applications
C1283 - 15 Practice for Installing Clay Flue Lining
C1284 - 18 Practice for Electrodeposition of the Actinides for Alpha Spectrometry
C1285 - 14 Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
C1287 - 18 Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry
C1288 - 17 Specification for Fiber-Cement Interior Substrate Sheets
C1289 - 20 Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1290 - 16 Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C1291 - 18 Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
C1292 - 16 Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1293 - 20a Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
C1294 - 20 Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1295 - 15 Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution
C1297 - 18 Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
C1298 - 95(2013) Guide for Design and Construction of Brick Liners for Industrial Chimneys
C1300 - 95(2020) Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
C1301 - 95(2014) Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
C1303/C1303M - 19 Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
C1304 - 18 Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1305/C1305M - 16 Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
C1306/C1306M - 08(2016)e1 Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
C1307 - 15 Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
C1308 - 08(2017) Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
C1309 - 97(2012) Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
C1311 - 14 Specification for Solvent Release Sealants
C1312 - 97(2012) Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
C1313/C1313M - 13(2019) Specification for Sheet Radiant Barriers for Building Construction Applications
C1314 - 18 Test Method for Compressive Strength of Masonry Prisms
C1315 - 19 Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
C1316 - 08(2017) Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler
C1318 - 15a(2020) Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1319 - 17 Specification for Concrete Grid Paving Units
C1320 - 20 Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
C1321 - 15(2020) Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
C1322 - 15(2019) Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323 - 16 Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1324 - 20a Test Method for Examination and Analysis of Hardened Masonry Mortar
C1325 - 19 Specification for Fiber-Mat Reinforced Cementitious Backer Units
C1325-SP - 19 Especificación de estándar para placas de cemento reforzadas con malla de fibra
C1325-POR - 19 Especificação padrão para Placas cimentícias reforçadas com tecido de fibras
C1326 - 13(2018) Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327 - 15(2019) Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1328/C1328M - 19 Specification for Plastic (Stucco) Cement
C1329/C1329M - 16a Specification for Mortar Cement
C1330 - 18 Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
C1331 - 18 Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
C1332 - 18 Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
C1334 - 05(2016)e1 Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
C1335 - 12(2017) Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1337 - 17 Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
C1338 - 19 Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1339/C1339M - 18 Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
C1340/C1340M - 10(2015) Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
C1341 - 13(2018) Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1343 - 16 Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
C1346 - 19 Practice for Dissolution of UF6 from P-10 Tubes
C1347 - 08(2014)e1 Practice for Preparation and Dissolution of Uranium Materials for Analysis
C1349 - 17 Specification for Architectural Flat Glass Clad Polycarbonate
C1350M - 96(2019) Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)
C1351M - 96(2017) Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]
C1352/C1352M - 15 Test Method for Flexural Modulus of Elasticity of Dimension Stone
C1353/C1353M - 20e1 Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
C1354/C1354M - 15 Test Method for Strength of Individual Stone Anchorages in Dimension Stone
C1355/C1355M - 96(2020) Specification for Glass Fiber Reinforced Gypsum Composites
C1356 - 07(2020) Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
C1358 - 18 Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
C1359 - 18e1 Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
C1360 - 17 Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361 - 10(2019) Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1363 - 19 Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
C1364 - 19 Specification for Architectural Cast Stone
C1365 - 18 Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
C1366 - 19 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1367 - 19 Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1368 - 18 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
C1369 - 19 Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1370 - 00(2012) Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
C1371 - 15 Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1372 - 17 Specification for Dry-Cast Segmental Retaining Wall Units
C1373/C1373M - 11(2017) Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1374 - 18 Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
C1375 - 00(2020) Guide for Substrates Used in Testing Building Seals and Sealants
C1376 - 15 Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
C1378 - 20 Test Method for Determination of Resistance to Staining
C1381/C1381M - 97(2018) Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1382 - 16 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1383 - 15 Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
C1384 - 18e1 Specification for Admixtures for Masonry Mortars
C1385/C1385M - 10(2017) Practice for Sampling Materials for Shotcrete
C1387 - 14 Guide for the Determination of Technetium-99 in Soil
C1392 - 20 Guide for Evaluating Failure of Structural Sealant Glazing
C1393 - 19 Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
C1394 - 20 Guide for In-Situ Structural Silicone Glazing Evaluation
C1396/C1396M - 17 Specification for Gypsum Board
C1397 - 13(2019) Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
C1399/C1399M - 10(2015) Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
C1400 - 11(2017) Guide for Reduction of Efflorescence Potential in New Masonry Walls
C1401 - 14 Guide for Structural Sealant Glazing
C1402 - 17 Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
C1403 - 15 Test Method for Rate of Water Absorption of Masonry Mortars
C1405 - 20a Specification for Glazed Brick (Single Fired, Brick Units)
C1407 - 98(2016) Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1408 - 16 Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
C1409 - 12(2018) Guide for Measuring and Estimating Quantities of Insulated Piping and Components
C1410 - 17 Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
C1411 - 20 Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
C1413 - 18 Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
C1415 - 18 Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry
C1417 - 19 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C1417M - 19 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
C1419 - 14(2020) Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1421 - 18 Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
C1422/C1422M - 20a Specification for Chemically Strengthened Flat Glass
C1423 - 16 Guide for Selecting Jacketing Materials for Thermal Insulation
C1424 - 15(2019) Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1425 - 19 Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1426 - 14(2020) Practices for Verification and Calibration of Polarimeters
C1427 - 16 Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
C1428 - 18 Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
C1429 - 99(2014) Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
C1430 - 18 Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
C1431 - 99(2018) Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
C1432 - 15 Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
C1433M - 20 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
C1433 - 20 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1435/C1435M - 20 Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
C1436 - 13 Specification for Materials for Shotcrete
C1437 - 20 Test Method for Flow of Hydraulic Cement Mortar
C1438 - 13(2017) Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
C1439 - 19 Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
C1440 - 17 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
C1441 - 13 Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
C1441-RUS - 13 Стандартный метод анализа холодильного агента 114 и другихуглеродсодержащих и фторсодержащих соединений в гексафториде урана с помощью инфракрасной спектроскопии с Фурье-преобразованием (ИКСФП)
C1442 - 14 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1443 - 99(2016) Specification for Glasses, Portlight, Circular, Fully Tempered
C1445 - 13(2018) Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446 - 19 Test Method for Measuring Consistency of Self-Flowing Castable Refractories
C1447/C1447M - 04(2019) Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
C1448/C1448M - 05(2019) Specification for Non-Asbestos Fiber-Cement Conduit
C1449/C1449M - 05a(2019) Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
C1450/C1450M - 04(2019) Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
C1451 - 18 Practice for Determining Variability of Concrete-Making Materials From a Single Source
C1453 - 19 Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
C1455 - 14e1 Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
C1456 - 13(2018) Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
C1457 - 18 Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
C1458 - 16 Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay
C1459 - 04(2019) Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
C1460 - 20 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground
C1461 - 08(2017) Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
C1462 - 00(2013) Specification for Uranium Metal Enriched to More than 15 % and Less Than 20 % 235U
C1463 - 19 Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
C1464 - 16 Specification for Bent Glass
C1465 - 08(2019) Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1466 - 00(2020) Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted From Ceramic Foodware
C1467/C1467M - 00(2016) Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
C1468 - 19a Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
C1469 - 10(2015) Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
C1470 - 20 Guide for Testing the Thermal Properties of Advanced Ceramics
C1471/C1471M - 05(2014)e1 Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
C1472 - 16e1 Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1473 - 19 Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
C1474 - 19 Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
C1475 - 17 Guide for Determination of Neptunium-237 in Soil
C1477 - 19 Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
C1478/C1478M - 20 Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C1479 - 16(2021) Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C1479M - 16(2021) Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
C1480/C1480M - 07(2012) Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
C1481 - 12(2017) Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1482 - 17 Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
C1483/C1483M - 17 Specification for Exterior Solar Radiation Control Coatings on Buildings
C1484 - 10(2018) Specification for Vacuum Insulation Panels
C1485 - 19 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
C1486 - 18 Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
C1487 - 19 Guide for Remedying Structural Silicone Glazing
C1489 - 15 Specification for Lime Putty for Structural Purposes
C1490 - 14 Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
C1491 - 19 Specification for Concrete Roof Pavers
C1492 - 03(2016) Specification for Concrete Roof Tile
C1493 - 19 Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
C1494 - 13(2018) Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1495 - 16 Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1496 - 18 Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
C1497 - 16 Specification for Cellulosic Fiber Stabilized Thermal Insulation
C1498 - 04a(2016) Test Method for Hygroscopic Sorption Isotherms of Building Materials
C1499 - 19 Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
C1500 - 08(2017) Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
C1501 - 19 Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1502 - 16 Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide
C1503 - 18 Specification for Silvered Flat Glass Mirror
C1504 - 20 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
C1504M - 20 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
C1505 - 15 Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
C1506 - 17 Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
C1507 - 12 Test Method for Radiochemical Determination of Strontium-90 in Soil
C1508 - 18 Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
C1510 - 01(2020) Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
C1511 - 15 Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
C1512 - 10(2020) Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
C1513 - 18 Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
C1514 - 08(2017) Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle
C1515 - 20 Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
C1516 - 05(2017) Practice for Application of Direct-Applied Exterior Finish Systems
C1517 - 16 Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
C1518 - 16 Specification for Precured Elastomeric Silicone Joint Sealants
C1519 - 10(2017) Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1520 - 20 Guide for Paintability of Latex Sealants
C1521 - 19(2020) Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1522 - 05(2013) Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1523 - 17 Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
C1524 - 19 Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
C1525 - 18 Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
C1526 - 19 Specification for Serpentine Dimension Stone
C1527/C1527M - 11(2018) Specification for Travertine Dimension Stone
C1528/C1528M - 20 Guide for Selection of Dimension Stone
C1529 - 19 Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
C1530/C1530M - 04(2019) Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
C1531 - 16 Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index
C1532/C1532M - 20 Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
C1533 - 15 Guide for General Design Considerations for Hot Cell Equipment
C1534 - 20a Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
C1535 - 05(2017) Practice for Application of Exterior Insulation and Finish Systems Class PI
C1536 - 19 Test Method for Measuring the Yield for Aerosol Foam Sealants
C1539 - 08(2014) Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting
C1540 - 20 Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1541 - 12(2017) Specification for Shielded Transition Couplings Using Flexible Polyvinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
C1542/C1542M - 19 Test Method for Measuring Length of Concrete Cores
C1545 - 02(2020) Practice for Dispersing Pigments and Other Materials Into Water-Based Suspensions With High Intensity Mixer
C1546 - 19 Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
C1547 - 02(2018) Classification for Fusion-Cast Refractory Blocks and Shapes
C1548 - 02(2020) Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio of Refractory Materials by Impulse Excitation of Vibration
C1549 - 16 Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
C1550 - 20 Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
C1552 - 16 Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
C1553 - 16 Guide for Drying Behavior of Spent Nuclear Fuel
C1554 - 18 Guide for Materials Handling Equipment for Hot Cells
C1556 - 11a(2016) Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
C1557 - 20 Test Method for Tensile Strength and Young's Modulus of Fibers
C1558 - 19 Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
C1559 - 15 Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
C1560 - 03(2016) Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
C1561 - 10(2016) Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry
C1562 - 10(2018) Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
C1563 - 08(2017) Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
C1564 - 20 Guide for Use of Silicone Sealants for Protective Glazing Systems
C1565 - 19 Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
C1567 - 13 Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
C1568 - 08(2020) Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
C1569 - 03(2016) Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
C1570 - 03(2016) Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
C1572/C1572M - 18 Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities
C1574 - 04(2018) Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
C1576 - 05(2017) Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
C1577 - 20 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C1579 - 13 Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
C1580 - 15 Test Method for Water-Soluble Sulfate in Soil
C1581/C1581M - 18a Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
C1582/C1582M - 11(2017)e1 Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
C1583/C1583M - 20 Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
C1585 - 20 Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
C1586 - 20 Guide for Quality Assurance of Mortars
C1587/C1587M - 15 Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
C1589/C1589M - 18 Practice for Outdoor Weathering of Construction Seals and Sealants
C1590 - 04(2014) Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
C1594 - 11(2017) Specification for Polyimide Rigid Cellular Thermal Insulation
C1600/C1600M - 19 Specification for Rapid Hardening Hydraulic Cement
C1601 - 20 Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
C1602/C1602M - 18 Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C1603 - 16 Test Method for Measurement of Solids in Water
C1604/C1604M - 05(2019) Test Method for Obtaining and Testing Drilled Cores of Shotcrete
C1605 - 04(2014) Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
C1606 - 10(2018) Test Method for Sampling Protocol for TCLP Testing of Container Glassware
C1607 - 12(2020) Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware
C1608 - 17 Test Method for Chemical Shrinkage of Hydraulic Cement Paste
C1609/C1609M - 19a Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
C1610/C1610M - 19 Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
C1611/C1611M - 18 Test Method for Slump Flow of Self-Consolidating Concrete
C1613 - 17 Specification for Precast Concrete Grease Interceptor Tanks
C1615/C1615M - 17 Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
C1616 - 07(2018) Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
C1617 - 19 Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
C1618M - 19 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure (Metric)
C1618 - 19 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure
C1619 - 20 Specification for Elastomeric Seals for Joining Concrete Structures
C1620 - 16e1 Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
C1621/C1621M - 17 Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
C1622/C1622M - 10(2016)e1 Specification for Cold-Weather Admixture Systems
C1623 - 17a Specification for Manufactured Concrete Masonry Lintels
C1624 - 05(2015) Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
C1625 - 19 Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
C1628 - 19 Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
C1629/C1629M - 19 Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
C1630 - 19 Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
C1634 - 20 Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units
C1635 - 16 Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
C1636 - 13 Guide for the Determination of Uranium-232 in Uranium Hexafluoride
C1637 - 13 Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
C1638 - 06(2013) Guide for the Determination of Iodine-129 In Uranium Oxide
C1639 - 19 Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation
C1642 - 20 Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
C1643 - 14(2020) Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
C1644 - 06(2017) Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
C1645 - 19 Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
C1646/C1646M - 16 Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
C1647 - 20 Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials
C1648 - 12(2018) Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
C1649 - 14 Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
C1650 - 14 Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
C1651 - 11(2018) Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
C1652/C1652M - 14 Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
C1655 - 06(2016) Classification of Fireclay and High-Alumina Mortars
C1656 - 13(2018) Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
C1658/C1658M - 19e1 Specification for Glass Mat Gypsum Panels
C1660 - 10(2018) Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
C1661 - 18 Guide for Viewing Systems for Remotely Operated Facilities
C1662 - 18 Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
C1663 - 18 Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
C1666/C1666M - 08(2015) Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
C1667 - 15 Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
C1668 - 20 Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
C1670/C1670M - 20a Specification for Adhered Manufactured Stone Masonry Veneer Units
C1671 - 20a Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
C1672 - 17 Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
C1673 - 10a(2018) Terminology of C26.10 Nondestructive Assay Methods
C1674 - 16 Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
C1675 - 21 Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1676/C1676M - 19 Specification for Microporous Thermal Insulation
C1677 - 11a(2017) Specification for Joints for Concrete Box, Using Rubber Gaskets
C1678 - 10(2015) Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
C1679 - 17 Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
C1681 - 18 Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
C1682 - 17 Guide for Characterization of Spent Nuclear Fuel in Support of Interim Storage, Transportation and Geologic Repository Disposal
C1683 - 10(2019) Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
C1684 - 18 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
C1685 - 15 Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
C1686 - 09(2017) Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
C1688/C1688M - 14a Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
C1689 - 08a(2014) Practice for Subsampling of Uranium Hexafluoride
C1691 - 11(2017) Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
C1692 - 18 Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
C1693 - 11(2017) Specification for Autoclaved Aerated Concrete (AAC)
C1694 - 09(2017) Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
C1695 - 20 Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
C1696 - 20 Guide for Industrial Thermal Insulation Systems
C1697 - 18 Specification for Blended Supplementary Cementitious Materials
C1698 - 19 Test Method for Autogenous Strain of Cement Paste and Mortar
C1699 - 09(2015) Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
C1701/C1701M - 17a Test Method for Infiltration Rate of In Place Pervious Concrete
C1702 - 17 Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
C1703 - 18 Practice for Sampling of Gaseous Uranium Hexafluoride for Enrichment
C1704/C1704M - 09a(2016) Test Method for Sampling and Testing Structural Cementitious Panels
C1705/C1705M - 09(2016) Specification for Structural Cementitious Panels
C1707 - 18 Specification for Pozzolanic Hydraulic Lime for Structural Purposes
C1708/C1708M - 19 Test Methods for Self-leveling Mortars Containing Hydraulic Cements
C1709 - 18 Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
C1710 - 20 Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
C1712 - 20 Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
C1713 - 17 Specification for Mortars for the Repair of Historic Masonry
C1714/C1714M - 19a Specification for Preblended Dry Mortar Mix for Unit Masonry
C1715/C1715M - 15 Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
C1716/C1716M - 20 Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
C1717 - 19 Test Methods for Conducting Strength Tests of Masonry Wall Panels
C1718 - 10(2019) Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
C1719 - 11(2017) Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1720 - 17e1 Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
C1721 - 15 Guide for Petrographic Examination of Dimension Stone
C1722 - 18 Guide for Repair and Restoration of Dimension Stone
C1723 - 16 Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
C1725 - 17 Guide for Hot Cell Specialized Support Equipment and Tools
C1726/C1726M - 10(2018) Guide for Use of Modeling for Passive Gamma Measurements
C1728 - 20b Specification for Flexible Aerogel Insulation
C1729 - 19 Specification for Aluminum Jacketing for Insulation
C1729M - 19 Specification for Aluminum Jacketing for Insulation
C1730 - 17 Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
C1731 - 16 Specification for Concrete Floor Tile
C1732 - 19 Practice for Installation of Concrete Floor Tiles
C1733 - 20 Test Method for Distribution Coefficients of Inorganic Species by Batch Method
C1735 - 17 Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
C1737 - 16 Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
C1738/C1738M - 19 Practice for High-Shear Mixing of Hydraulic Cement Pastes
C1740 - 16 Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
C1741 - 18 Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
C1742 - 17 Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method
C1743 - 19 Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
C1744 - 19 Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
C1745/C1745M - 18 Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
C1746/C1746M - 19 Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
C1747/C1747M - 13 Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
C1749 - 17a Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
C1750 - 17 Guide for Development, Verification, Validation, and Documentation of Simulated High-Level Tank Waste
C1751 - 20 Guide for Sampling Radioactive Tank Waste
C1752 - 17 Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges
C1753/C1753M - 15e1 Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements
C1754/C1754M - 12 Test Method for Density and Void Content of Hardened Pervious Concrete
C1756 - 17a Guide for Comparing Seal or Sealant Behavior to Reference Photographs
C1757 - 13 Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete
C1758/C1758M - 15 Practice for Fabricating Test Specimens with Self-Consolidating Concrete
C1760 - 12 Test Method for Bulk Electrical Conductivity of Hardened Concrete
C1761/C1761M - 17 Specification for Lightweight Aggregate for Internal Curing of Concrete
C1763 - 20 Test Method for Water Absorption by Immersion of Thermal Insulation Materials
C1764 - 20 Test Methods for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
C1765 - 19 Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C1766 - 15(2019) Specification for Factory-Laminated Gypsum Panel Products
C1767 - 19 Specification for Stainless Steel Jacketing for Insulation
C1767M - 19 Specification for Stainless Steel Jacketing for Insulation
C1768/C1768M - 12(2017) Practice for Accelerated Curing of Concrete Cylinders
C1769 - 15 Practice for Analysis of Spent Nuclear Fuel to Determine Selected Isotopes and Estimate Fuel Burnup
C1770 - 13 Test Method for Determination of Loose and Tapped Bulk Density of Plutonium Oxide
C1771 - 19 Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction
C1773 - 17 Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
C1774 - 13(2019) Guide for Thermal Performance Testing of Cryogenic Insulation Systems
C1775 - 14 Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
C1776/C1776M - 17 Specification for Wet-Cast Precast Modular Retaining Wall Units
C1777 - 20 Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter
C1778 - 20 Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
C1778-RU-RU - 20 Стандартное руководство по снижению риска возникновения вредной реакции между заполнителем и щелочью в бетоне
C1780 - 20 Practice for Installation Methods for Cement-based Adhered Masonry Veneer
C1781/C1781M - 18e1 Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
C1782/C1782M - 20a Specification for Segmental Concrete Paving Slabs
C1783 - 15 Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
C1784 - 20 Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
C1785 - 17 Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
C1786 - 19 Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C1787 - 20 Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
C1788 - 20 Specification for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
C1789 - 14(2018) Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels
C1790 - 15 Specification for Fly Ash Facing Brick
C1791 - 16 Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems
C1792 - 14 Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes
C1793 - 15 Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
C1794 - 19 Test Methods for Determination of the Water Absorption Coefficient by Partial Immersion
C1795 - 17 Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
C1797 - 17 Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
C1798/C1798M - 19 Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete
C1799/C1799M - 19 Guide to Dimension Stone Test Specimen Sampling and Preparation
C1800/C1800M - 16 Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
C1802 - 20 Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
C1803 - 15 Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser
C1804 - 20 Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
C1806 - 14 Test Method for Measuring the Flow Rate of Aerosol Foam Sealants
C1807 - 15 Guide for Nondestructive Assay of Special Nuclear Material (SNM) Holdup Using Passive Neutron Measurement Methods
C1809 - 20 Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders
C1810/C1810M - 20a Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
C1812/C1812M - 15e1 Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests
C1814/C1814M - 20 Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
C1815 - 17 Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension
C1816 - 16 Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis
C1817 - 16 Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O2) Pellets by Gravimetry
C1818 - 19 Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C1819 - 15 Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
C1819-RU-RU - 15 Стандартный метод испытания для определения кольцевой прочности на растяжение трубчатых образцов из композитных материалов с матрицей из высококачественной керамики, армированных непрерывным волокном, при температуре окружающей среды с использованием эластомерной вставки
C1821/C1821M - 16(2021)e1 Practice for Installation of Underground Circular Precast Concrete Manhole Structures
C1822 - 15 Specification for Insulating Covers on Accessible Lavatory Piping
C1823/C1823M - 20 Test Method for Shear Bond Strength of Adhered Dimension Stone
C1824 - 16(2021) Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
C1825 - 19 Guide for Developing Specifications for Masonry Units
C1827 - 20 Test Method for Determination of the Air-Entraining Admixture Demand of a Cementitious Mixture
C1827-RU-RU - 20 Стандартный метод испытания для определения потребности в воздухововлекающей добавке цементирующей смеси
C1831/C1831M - 17 Guide for Gamma Radiation Shielding Performance Testing
C1832 - 16 Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer
C1834 - 16 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
C1835 - 16 Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
C1835-RU-RU - 16 Стандартная классификация карбидкремниевых композитов, армированных карбидкремниевым волокном (SiC-SiC)
C1836 - 16 Classification for Fiber Reinforced Carbon-Carbon Composite Structures
C1836-RU-RU - 16 Стандартная классификация армированных волокном конструкций из углерод-углеродного композитного материала, армированных волокном
C1837 - 17 Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures
C1838 - 16 Practice for Cleaning for 1S and 2S Bottles
C1840/C1840M - 17 Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
C1842 - 16 Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
C1842-RU-RU - 16 Стандартный метод испытаний для анализа бора и кремния в гексафториде урана с помощью инфракрасной спектроскопии с Фурьепреобразованием (FTIR)
C1843 - 16 Test Method for Determining Moisture Content in Uranium-Ore Concentrate
C1844 - 16 Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution
C1845 - 16 Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
C1846/C1846M - 19 Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C1848 - 17a Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure
C1849/C1849M - 17 Test Method for Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted Concrete
C1849/C1849M-RU-RU - 17 Стандартный метод испытания для определения плотности и воздухосодержания (метод давления) свежеприготовленного уплотняемого катком бетона
C1850 - 17 Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems
C1851 - 18 Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
C1852 - 20 Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
C1853 - 17 Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U, Pu)O2) Sintered Pellets by Direct Combustion-Infrared Detection Method
C1854 - 17 Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O2) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Measurement
C1855 - 18 Test Method for Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using Hybrid K-Edge Densitometry and X-Ray Fluorescence
C1856/C1856M - 17 Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
C1857/C1857M - 19 Test Method for Evaluating the Adhesion (Pull-Off) Strength of Concrete Repair and Overlay Mortar
C1858 - 17a Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions
C1859 - 19 Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope
C1860 - 20 Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
C1861 - 20 Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
C1862 - 17 Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
C1863 - 18 Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
C1864 - 17e1 Test Method for Determination of Solar Reflectance of Directionally Reflective Material Using Portable Solar Reflectometer
C1865 - 18 Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
C1866/C1866M - 20 Specification for Ground-Glass Pozzolan for Use in Concrete
C1868 - 18 Practice for Ceramographic Preparation of UO2 and Mixed Oxide (U,Pu)O2 Pellets for Microstructural Analysis
C1869 - 18 Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
C1870 - 18 Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
C1871 - 18a Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
C1872 - 18e2 Test Method for Thermogravimetric Analysis of Hydraulic Cement
C1874 - 20 Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
C1875 - 18 Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
C1876 - 19 Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
C1877 - 19 Specification for Adhered Concrete Masonry Units
C1878 - 19 Test Method for Surface Water Resistance of Vapor Retarders for Thermal Insulation
C1880 - 19 Practice for Sampling Gaseous Uranium Hexafluoride using Alumina Pellets
C1881 - 20 Guide for Closed-Loop Recycling of Scrap Gypsum Panel Products
C1883 - 19 Practice for Sampling of Gaseous Enriched Uranium Hexafluoride
C1884 - 19 Specification for Concrete Ballast Block
C1889 - 21 Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Utility, Water, and Wastewater Structures Using AASHTO LRFD Design
C1890 - 19 Test Method for K-slump of Freshly Mixed Concrete
C1891 - 20 Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
C1892/C1892M - 20a Test Methods for Strength of Anchors in Masonry
C1894 - 19 Guide for Microbially Induced Corrosion of Concrete Products
C1895 - 20 Test Method for Determination of Mohs Scratch Hardness
C1896 - 20 Specification for Joints for Concrete Arch Pipe Using Profile Rubber Gaskets
C1897 - 20 Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements
C1898 - 20 Test Methods for Determining the Chemical Resistance of Concrete Products to Acid Attack
C1900 - 20 Practice for Weathering and Evaluation of Laminated Glass
C1902 - 20 Specification for Cellular Glass Insulation Used in Building and Roof Applications
C1903 - 21 Specification for Precast Concrete Duct Bank
C1904 - 20 Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Product

D[edit]

E[edit]

F[edit]

G[edit]

G1-G999[edit]

G1 - 03(2017)e1 Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
G1-RU-RU - 03(2017)e1 Стандартное практическое руководство по подготовке, очистке и оценке образцов для коррозионного испытания
G2/G2M - 19 Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)
G3 - 14(2019) Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
G4 - 01(2014) Guide for Conducting Corrosion Tests in Field Applications
G4-RU-RU - 01(2014) Стандартное руководство по проведению коррозионных испытаний в условиях эксплуатации
G5 - 14e1 Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
G6 - 07(2020) Test Method for Abrasion Resistance of Pipeline Coatings
G7/G7M - 13 Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
G8 - 96(2019) Test Methods for Cathodic Disbonding of Pipeline Coatings
G8-RU-RU - 96(2019) Стандартные методы испытаний для проверки катодного отслаивания покрытий трубопровода
G9 - 07(2020) Test Method for Water Penetration into Pipeline Coatings
G10 - 10(2019) Test Method for Specific Bendability of Pipeline Coatings
G11 - 19 Practice for Effects of Outdoor Weathering on Pipeline Coatings
G13/G13M - 13 Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
G14 - 04(2018) Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
G14-RU-RU - 04(2018) Стандартный метод испытания для определения ударной прочности покрытий трубопроводов (ударные испытания падающим грузом)
G16 - 13(2019) Guide for Applying Statistics to Analysis of Corrosion Data
G17 - 07(2020) Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
G18 - 07(2020) Test Method for Joints, Fittings, and Patches in Coated Pipelines
G20 - 10(2019) Test Method for Chemical Resistance of Pipeline Coatings
G21 - 15 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
G21-RU-RU - 15 Стандартные практические указания по определению плеснестойкости синтетических полимерных материалов
G24 - 13 Practice for Conducting Exposures to Daylight Filtered Through Glass
G28 - 02(2015) Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
G28-RU-RU - 02(2015) Стандартный метод испытания для обнаружения восприимчивости к межкристаллитной коррозии в кованых, никелевых, хром-содержащих сплавах
G29 - 16 Practice for Determining Algal Resistance of Polymeric Films
G30 - 97(2016) Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
G31 (ASTM/NACE) Guide for Laboratory Immersion Corrosion Testing of Metals
G32 - 16 Test Method for Cavitation Erosion Using Vibratory Apparatus
G33 - 99(2020) Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
G34 - 01(2018)e1 Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
G35 - 98(2015) Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
G36 - 94(2018) Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
G37 - 98(2016) Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
G38 - 01(2013) Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
G39 - 99(2016) Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
G39-RU-RU - 99(2016) Стандартное практическое руководство по приготовлению и использованию образцов для испытания на коррозию под напряжением изогнутых балок
G40 - 17 Terminology Relating to Wear and Erosion
G41 - 90(2018) Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
G42 - 11(2019)e1 Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
G42-RU-RU - 11(2019)e1 Стандартный метод испытания для определения катодного отслаивания покрытий трубопроводов, подвергаемых действию повышенных температур
G44 - 99(2013) Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution
G46 - 94(2018) Guide for Examination and Evaluation of Pitting Corrosion
G46-RU-RU - 94(2018) Стандартное руководство по исследованию и оценке питтинговой коррозии
G47 - 20 Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
G48 - 11(2020)e1 Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
G49 - 85(2019) Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
G49-RU-RU - 85(2019) Стандартное практическое руководство по подготовке и использованию образцов для испытания на коррозию под действием напряжения при прямом растяжении
G50 - 20 Practice for Conducting Atmospheric Corrosion Tests on Metals
G51 - 18 Test Method for Measuring pH of Soil for Use in Corrosion Testing
G52 - 20 Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
G55 - 07(2019) Test Method for Evaluating Pipeline Coating Patch Materials
G56 - 18 Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
G57 - 20 Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
G58 - 85(2015) Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
G59 - 97(2020) Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
G60 - 01(2018) Practice for Conducting Cyclic Humidity Exposures
G61 - 86(2018) Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
G62 - 14 Test Methods for Holiday Detection in Pipeline Coatings
G62-RUS - 14 Стандартные методы определения пропусков в защитном покрытии трубопровода
G63 - 15 Guide for Evaluating Nonmetallic Materials for Oxygen Service
G64 - 99(2013) Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
G65 - 16e1 Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
G66 - 99(2018) Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
G67 - 18 Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
G69 - 20 Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
G71 - 81(2019) Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
G72/G72M - 15 Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
G73 - 10(2017) Test Method for Liquid Impingement Erosion Using Rotating Apparatus
G74 - 13 Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
G75 - 15 Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
G76 - 18 Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
G77 - 17 Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
G78 - 20 Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
G81 - 97a(2018) Test Method for Jaw Crusher Gouging Abrasion Test
G82 - 98(2021)e1 Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
G84 - 89(2020) Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
G85 - 19 Practice for Modified Salt Spray (Fog) Testing
G86 - 17 Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
G87 - 02(2018) Practice for Conducting Moist SO2 Tests
G88 - 13 Guide for Designing Systems for Oxygen Service
G90 - 17 Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight
G91 - 11(2018) Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
G92 - 20 Practice for Characterization of Atmospheric Test Sites
G93/G93M - 19 Guide for Cleanliness Levels and Cleaning Methods for Materials and Equipment Used in Oxygen-Enriched Environments
G94 - 05(2014) Guide for Evaluating Metals for Oxygen Service
G95 - 07(2013) Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
G95-RU-RU - 07(2013) Стандартный метод испытания для проверки катодного отслаивания покрытий трубопроводов (метод с применением контрольной ячейки)
G96 - 90(2018) Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
G97 - 18 Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
G98 - 17 Test Method for Galling Resistance of Materials
G99 - 17 Test Method for Wear Testing with a Pin-on-Disk Apparatus
G100 - 89(2015) Test Method for Conducting Cyclic Galvanostaircase Polarization
G101 - 04(2020) Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
G102 - 89(2015)e1 Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
G103 - 97(2016) Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution
G105 - 20 Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
G106 - 89(2015) Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
G107 - 95(2020)e1 Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
G108 - 94(2015) Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
G109 - 07(2013) Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
G110 - 92(2015) Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
G111 - 97(2018) Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
G112 - 92(2015) Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
G113 - 16 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
G114 - 14 Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
G115 - 10(2018) Guide for Measuring and Reporting Friction Coefficients
G116 - 99(2020)e1 Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
G119 - 09(2016) Guide for Determining Synergism Between Wear and Corrosion
G120 - 15 Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
G121 - 18 Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
G122 - 20 Test Method for Evaluating the Effectiveness of Cleaning Agents and Processes
G123 - 00(2015) Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
G124 - 18 Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
G125 - 00(2015) Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
G126 - 16 Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
G127 - 15 Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems
G128/G128M - 15 Guide for Control of Hazards and Risks in Oxygen Enriched Systems
G129 - 00(2013) Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
G130 - 12(2020) Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
G131 - 96(2016)e1 Practice for Cleaning of Materials and Components by Ultrasonic Techniques
G132 - 96(2018) Test Method for Pin Abrasion Testing
G133 - 05(2016) Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
G134 - 17 Test Method for Erosion of Solid Materials by Cavitating Liquid Jet
G135 - 95(2019) Guide for Computerized Exchange of Corrosion Data for Metals
G136 - 03(2016)e1 Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
G137 - 97(2017) Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
G138 - 12(2020)e1 Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
G139 - 05(2015) Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
G140 - 02(2019) Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
G141 - 09(2013) Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
G142 - 98(2016) Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
G143 - 03(2018) Test Method for Measurement of Web/Roller Friction Characteristics
G144 - 01(2014) Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
G145 - 08(2016) Guide for Studying Fire Incidents in Oxygen Systems
G146 - 01(2018) Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
G147 - 17 Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
G148 - 97(2018) Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
G148-RU-RU - 97(2018) Стандартное практическое руководство для оценки поглощения, проникновения и перемещения водорода в металлах электрохимической методикой
G150 - 18 Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys
G151 - 19 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G151-RU-RU - 19 СТАНДАРТНАЯ МЕТОДИКА ЭКСПОНИРОВАНИЯ НЕМЕТАЛЛИЧЕСКИХ МАТЕРИАЛОВ ЛАБОРАТОРНЫМИ ИСТОЧНИКАМИ СВЕТА В УСТРОЙСТВАХ ДЛЯ УСКОРЕННЫХ ИСПЫТАНИЙ
G152 - 13 Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G153 - 13 Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G154 - 16 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
G155 - 13 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
G155-RU-RU - 13 СТАНДАРТНАЯ МЕТОДИКА РАБОТЫ АППАРАТА С КСЕНОНОВОЙ СВЕТОВОЙ ДУГОЙ ДЛЯ ВОЗДЕЙСТВИЯ НА НЕМЕТАЛЛИЧЕСКИЕ МАТЕРИАЛЫ
G156 - 17 Practice for Selecting and Characterizing Weathering Reference Materials
G157 - 98(2018) Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
G158 - 98(2016) Guide for Three Methods of Assessing Buried Steel Tanks
G160 - 12(2019) Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
G161 - 00(2018) Guide for Corrosion-Related Failure Analysis
G162 - 18 Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
G164 - 99(2018) Test Method for Determination of Surface Lubrication on Flexible Webs
G165 - 99(2017) Practice for Determining Rail-to-Earth Resistance
G166 - 00(2020) Guide for Statistical Analysis of Service Life Data
G167 - 15 Test Method for Calibration of a Pyranometer Using a Pyrheliometer
G168 - 17 Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
G169 - 01(2013) Guide for Application of Basic Statistical Methods to Weathering Tests
G170 - 06(2020)e1 Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
G171 - 03(2017) Test Method for Scratch Hardness of Materials Using a Diamond Stylus
G172 - 19 Guide for Statistical Analysis of Accelerated Service Life Data
G173 - 03(2020) Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
G174 - 04(2017) Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
G175 - 13 Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications
G176 - 03(2017) Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
G177 - 03(2020) Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
G178 - 16 Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
G179 - 04(2019) Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
G180 - 13(2019) Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
G181 - 11(2017) Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
G182 - 13(2018) Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
G183 - 15 Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
G184 - 06(2020)e1 Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
G185 - 06(2020)e1 Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
G186 - 05(2016) Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
G187 - 18 Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
G188 - 05(2017) Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
G189 - 07(2021)e1 Guide for Laboratory Simulation of Corrosion Under Insulation
G190 - 15 Guide for Developing and Selecting Wear Tests
G192 - 08(2020)e1 Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
G193 - 20a Terminology and Acronyms Relating to Corrosion
G194 - 08(2018) Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
G195 - 18 Guide for Conducting Wear Tests Using a Rotary Platform Abraser
G196 - 08(2016) Test Method for Galling Resistance of Material Couples
G197 - 14 Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
G198 - 17 Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
G199 - 09(2020)e1 Guide for Electrochemical Noise Measurement
G200 - 20 Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
G201 - 16 Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
G202 - 12(2020) Test Method for Using Atmospheric Pressure Rotating Cage
G203 - 10(2020) Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
G204 - 15 Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
G205 - 16 Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
G206 - 17 Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
G207 - 11(2019)e1 Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
G208 - 12(2020) Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
G209 - 14(2018) Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
G210 - 13(2018) Practice for Operating the Severe Wastewater Analysis Testing Apparatus
G211 - 14(2020) Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
G213 - 17 Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
G214 - 16 Test Method for Integration of Digital Spectral Data for Weathering and Durability Applications
G215 - 17 Guide for Electrode Potential Measurement
G217 - 16 Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method
G218 - 19 Guide for External Corrosion Protection of Ductile Iron Pipe Utilizing Polyethylene Encasement Supplemented by Cathodic Protection
G219 - 18 Guide for Determination of Static Coefficient of Friction of Test Couples Using an Inclined Plane Testing Device
G220 - 20 Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potential

Withdrawn Standard[edit]

G12 Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013, replaced by D7091)
G19 Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial (Withdrawn 2010, no replacement)
G70 Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) (Withdrawn 2013, no replacement)
G80 Test Method for Specific Cathodic Disbonding of Pipeline Coatings (Withdrawn 2013, no replacement)
G117 Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests (Withdrawn 2016, no replacement)
G118 Guide for Recommended Format of Wear Test Data Suitable for Databases (Withdrawn 2016, no replacement)

References[edit]

^ "ASTM A255 - 10(2014) Test Methods for Determining Hardenability of Steel". ASTM. 2014. Retrieved August 29, 2017.

External links[edit]

[1] "ASTM A255 - 10(2014) Test Methods for Determining Hardenability of Steel". ASTM. 2014. Retrieved August 29, 2017.

[1]