Lucy (spacecraft)

Lucy

Artist's conception of Lucy spacecraft flying past the Trojan asteroid 617 Patroclus and its binary companion Menoetius
Names	Discovery Mission 13
Mission type	Multiple-flyby of asteroids
Operator	NASA Goddard · SwRI
COSPAR ID	2021-093A
SATCAT no.	49328
Website	lucy.swri.edu
Mission duration	12 years (planned) 3 years, 1 month and 7 days (in progress)
Spacecraft properties
Manufacturer	Lockheed Martin
Launch mass	1,550 kg (3,420 lb)[1]
Dry mass	821 kg (1,810 lb)
Dimensions	13 m (43 ft) in long [2] Each solar panel: 7.3 m (24 ft) in diameter
Power	504 watts (furthest encounter)
Start of mission
Launch date	16 October 2021, 09:34 UTC[1][3]
Rocket	Atlas V 401 (AV-096)
Launch site	Cape Canaveral SLC-41
Contractor	United Launch Alliance
Instruments
High-resolution visible imager (L'LORRI) Optical and near-infrared imaging spectrometer (L'Ralph) Thermal infrared spectrometer (L'TES)
Lucy mission patch Discovery Program ← InSight Psyche →

Lucy is a NASA space probe on a twelve-year journey to eight different asteroids. It is slated to visit two main belt asteroids as well as six Jupiter trojans – asteroids that share Jupiter's orbit around the Sun, orbiting either ahead of or behind the planet.^[4][5] All target encounters will be flyby encounters.^[6] The Lucy spacecraft is the centerpiece of a US$981 million mission.^[7] It was launched on 16 October 2021.

On 4 January 2017, Lucy was chosen, along with the Psyche mission, as NASA's Discovery Program missions 13 and 14 respectively.^[6][8]

The mission is named after the Lucy hominin fossils, because study of the trojans could reveal the "fossils of planet formation": materials that clumped together in the early history of the Solar System to form planets and other bodies.^[9] The hominid was named after the 1967 Beatles song "Lucy in the Sky with Diamonds".^[10] The spacecraft carries a disc made of lab-grown diamonds for its L'TES instrument.^[11]

Lucy was launched from Cape Canaveral SLC-41 on 16 October 2021, at 09:34 UTC^[3] on the 401 variant of a United Launch Alliance Atlas V launch vehicle. It gained one gravity assist from Earth a year later on 16 October 2022,^[12] and after making a flyby of the asteroid 152830 Dinkinesh in 2023,^[13] it will gain another gravity assist from Earth in 2024.^[14] In 2025, it will fly by the inner main-belt asteroid 52246 Donaldjohanson, which was named after the discoverer of the Lucy hominin fossil.^[15] In 2027, it will arrive at the L₄ Trojan cloud (the Greek camp of asteroids that orbits about 60° ahead of Jupiter), where it will fly by four Trojans, 3548 Eurybates (with its satellite), 15094 Polymele, 11351 Leucus, and 21900 Orus.^[6] After these flybys, Lucy will return to Earth in 2031 for another gravity assist toward the L₅ Trojan cloud (the Trojan camp which trails about 60° behind Jupiter), where it will visit the binary Trojan 617 Patroclus with its satellite Menoetius in 2033. The mission may end with the Patroclus–Menoetius flyby, but at that point Lucy will be in a stable, 6-year orbit between the L4 and L5 clouds, and a mission extension will be possible.^{[citation needed]}

Three instruments comprise the payload: a high-resolution visible imager, an optical and near-infrared imaging spectrometer, and a thermal infrared spectrometer.^[16] Harold F. Levison of the Southwest Research Institute in Boulder, Colorado is the principal investigator, with Simone Marchi of Southwest Research Institute as the mission's deputy principal investigator. NASA's Goddard Space Flight Center executes the mission under the direction of the Planetary Missions Program Office at Marshall Space Flight Center for the Planetary Science Division-Science Mission Directorate at NASA HQ.^{[citation needed]}

Exploration of Jupiter Trojans is one of the high-priority goals outlined in the Planetary Science Decadal Survey. Jupiter Trojans have been observed by ground-based telescopes and the Wide-field Infrared Survey Explorer to be "dark with... surfaces that reflect little sunlight".^[17] Jupiter is 5.2 AU (780×10^⁶ km; 480×10^⁶ mi) from the Sun, or about five times the Earth-Sun distance.^[18] The Jupiter Trojans are at a similar distance but can be somewhat farther or closer to the Sun depending on where they are in their orbits. There may be as many Trojans as there are Main-belt asteroids.^[19]

NASA selected Lucy through the Discovery Program Announcement of Opportunity (AO) released on 5 November 2014.^[20] Lucy was submitted as part of a call for proposals for the next mission(s) for Discovery Program that closed in February 2015. Proposals had to be ready to launch by the end of 2021. Twenty-eight proposals were received in all.

On 30 September 2015, Lucy was selected as one of five finalist missions, each of which received US$3 million to produce more in-depth concept design studies and analyses.^{[21][22][23][24]} Its fellow finalists were DAVINCI, NEOCam, Psyche and VERITAS. On 4 January 2017, Lucy and Psyche were selected for development and launch.

On 31 January 2019, NASA announced that Lucy would launch in October 2021 on an Atlas V 401 launch vehicle from Cape Canaveral, Florida. The total cost for the launch was estimated to be US$148.3 million.^[25] On 11 February 2019, SpaceX protested the contract award, claiming that it could launch Lucy into the same orbit at a "significantly cheaper cost". On 4 April 2019, SpaceX withdrew the protest.^[26]

On 28 August 2020, NASA announced that Lucy had passed its Key Decision Point-D (KDP-D) with a "green light" to assemble and test the spacecraft and its instruments.^[27] The spacecraft instruments arrived beginning with L'LORRI on 26 October 2020.^[28] On 30 July 2021, the spacecraft was transported on a C-17 transport aircraft to Florida for launch preparations, and Lucy was encapsulated into the rocket fairing on 30 September 2021.

Lucy was launched on 16 October 2021 at 09:34 UTC^[29][30] at the opening of its 23-day launch window.^[30]

The science payload includes:^[2][21]

• L'Ralph – panchromatic and color visible imager (0.4–0.85 μm) and infrared spectroscopic mapper (1–3.6 μm). L'Ralph is based on the Ralph instrument on New Horizons and was built at Goddard Space Flight Center. It will be used to measure silicates, ices, and organics at the surface. The L'Ralph instrument has a three-mirror anastigmat design f/6 with a 75 mm aperture. The telescope structure is composed from one aluminum block to provide an athermal imaging system. A beamsplitter transmits the longer wavelength light to LEISA and reflects light short of ~960 nm to MVIC. The instrument is passively cooled with a 20-inch (510 mm) diameter radiator that cools the LEISA detector to ~100 K. A new component of the L'Ralph instrument compared with its predecessors is a scan mirror assembly. The scan mirror is used to sweep the target across the Ralph focal planes to build up either visible images or infrared spectra.^[31]

• L'LORRI – high-resolution visible imager. L'LORRI is derived from the LORRI instrument on New Horizons and was built at the Johns Hopkins University Applied Physics Laboratory. It will provide the most detailed images of the surface of the Trojans. L'LORRI uses the same detector and has the same optical design as New Horizons LORRI. The primary mirror has a diameter of 20.8 cm, the system has a focal length of 262 cm, and the detector is a 1024 × 1024 thinned back-illuminated frame transfer CCD from Teledyne e2v. Each pixel subtends 5 μrad and will have a point-spread function with a FWHM of less than 15 μrad. Differences from the heritage instrument worth noting are the addition of redundant electronics, memory to store LORRI data, and the difference in the instrument accommodation. On New Horizons, the LORRI instrument is inside of the spacecraft, but on Lucy L'LORRI is mounted on an Instrument Pointing Platform (IPP).^[31]

• L'TES – thermal infrared spectrometer (6–75 μm). L'TES is similar to OTES on the OSIRIS-REx mission and was built at Arizona State University. It will reveal the thermal characteristics of the observed Trojans, which will also inform the composition and structure of the material on the surface of the asteroids. OTES was used to derive the surface composition and thermal inertia of the asteroid Bennu. However, because the Trojan asteroids at 5 AU are much colder than Bennu, the Lucy mission does not plan to use L'TES to derive surface composition. Instead, L'TES will be used primarily to infer regolith properties. L'TES has the same optical–mechanical design as OTES, including a 15.2 cm diameter Cassegrain telescope, a Michelson interferometer with chemical vapor deposited diamond beamsplitter, and an uncooled, deuterated L-alanine doped triglycine sulfate (DLATGS) pyroelectric detector. L'TES has only small differences from the heritage instrument including removing a potential stray light path by modifying the telescope baffle and primary mirror inner diameter and improvements to the metrology laser system. An internal calibration cone blackbody target provides radiometric calibration. The L'TES instrument collects data from 6–75 μm and has a noise equivalent spectral radiance (NESR) of 2.310–8 W cm⁻² sr⁻¹ cm⁻¹ between 300 cm⁻¹ (7.4 μm) and 1350 cm⁻¹ (33 μm). For surfaces with temperatures greater than 75 K, L'TES will determine the temperature with an accuracy of 2 K. The 50% encircled energy of the instrument subtends 6.5 mrad. L'TES has one mode of taking data. It continuously collects interferograms (every 0.5, 1.0, or 2.0 s) and transfers them to the spacecraft for storage before downlink. The instrument will start collecting data one day before closest approach, which is before the target fills the instrument's FOV. The data collection will continue until one day after closest approach. The L'TES instrument will measure the radiance of each Trojan asteroid at four locations at different local times of day with the additional requirement that one observation measures a location within 30° of the subsolar point and another measures the unilluminated surface.^[31]
• The radio science investigation will determine the mass of the Trojans by using the spacecraft radio telecommunications hardware and high-gain antenna to measure Doppler shifts.
• T2CAM – terminal tracking camera (T2CAM or TTCAM) would be used to take wide-field images of the asteroids to better constrain the asteroids shapes.

• 
  Illustration of the deployed spacecraft
• 
  Lucy spacecraft solar arrays deploying and main engine burn
• 
  Instruments onboard
• 
  The Instrument Pointing Platform (IPP)

Onboard the spacecraft is a golden plaque that contains its launch date, the positions of the planets at the launch date, the continents of Earth at the time of launch, its nominal trajectory, and twenty speeches, poems, and song lyrics from people such as Martin Luther King Jr., Carl Sagan, The Beatles, and more. Because the spacecraft will not leave the Solar System or be intentionally crashed into a planetary body, there is a chance that future generations of humanity will be able to recover it.^[32]

The specific objects that are targeted for flyby observation passes performed by the spacecraft include:^{[15][33][34][35]}

Lucy has several different engines:

Nammo LEROS 1c:^[41]

• Count: 1
• Type: hypergolic bipropellant engine
• Propellant: MON/Hydrazine
• Thrust: 458 N (386–470 N)
• Specific Impulse: 324 s

Aerojet Rocketdyne MR-103J:^[42][43]

• Count: 8
• Type: catalytic monopropellant thruster
• Propellant: Hydrazine
• Thrust: 1 N (0.19–1.13 N)
• Specific Impulse: 202–224 s

Aerojet Rocketdyne MR-106L:^[42][44]

• Count: 6
• Type: catalytic monopropellant thruster
• Propellant: Hydrazine
• Thrust: 22 N (10–34 N)
• Specific Impulse: 228–235 s

Although the Lucy concept originated in late 2014, and was selected for funding in 2015, the Lucy spaceflight began on 16 October 2021 with the launch of the Lucy spacecraft aboard a United Launch Alliance Atlas V 401 launch vehicle^[45] into a stable parking orbit. During the next hour, the second stage reignited to place Lucy on an interplanetary trajectory in a heliocentric orbit on a twelve-year mission to two groups of Sun-Jupiter Trojan asteroids as well as close flybys of main belt asteroids during one of three planned passes through the asteroid belt. If the spacecraft remains operational during the 12-year planned duration, it is likely the mission will be extended and directed to additional asteroid targets.^[46][47]

On 16 October 2021 Lucy began to unfurl its two solar arrays. While the initial deployment of the arrays appeared to go smoothly, it was later discovered that one of the solar arrays failed to latch securely into open position. Thomas Zurbuchen, NASA's associate administrator for science, stressed the spacecraft remained "safe and stable".^[48] Later testing on 26 October indicated the affected array was between 75 and 95 percent of full deployment. As of January 2022^[update], the spacecraft is in cruise mode. NASA has stated they are reviewing a range of potential options, including simply letting the array remain as it is.^[49][50] In late January 2022 NASA announced that they had found the cause for the failure of one of the solar arrays to fully deploy and then latch open securely. At the time, the agency's view was that there were two options to proceed: try to redeploy the solar array by further running of the array deployment motor, or leave the array as is, i.e. make no further attempt to fully open and latch it. Even with one solar array only partially deployed, the spacecraft was generating enough power for the mission. NASA said it would consider thoroughly its options and only take action at a (much) later time, as the issue was not an imminent risk to the mission.^[51]

On 9 May 2022 Lucy executed its first step in completing the deployment of the unlatched solar array. This was not intended to fully deploy and latch the array but simply to validate that the team's ground testing adequately represented the array-latch problem. After reviewing the data, the next planned step was for another deployment effort.^[52][53]

By 5 August 2022, NASA reported that solar array is between 353 degrees and 357 degrees open (out of 360 degrees) but not latched, making it stable enough for the spacecraft to operate as needed for mission operations.^[54][55]

After the attempt on 13 December 2022, the team suspended further work with the solar panels.^[56]

On 1 November 2023, Lucy successfully flew by its first target, the main-belt asteroid 152830 Dinkinesh, at a relative speed of 4.5 km/s (2.8 mi/s).^[57] On the following day, NASA released images from the flyby and announced the discovery of a small satellite orbiting Dinkinesh.^[58] The first images from the flyby showed that Dinkinesh is approximately 790 m (2,590 ft) in diameter, while the satellite is approximately 220 m (720 ft) in diameter.^[59] Later images showed that the satellite was actually two objects in direct contact, known as a contact binary.^[60] The discovery of Dinkinesh's satellite brought the total number of Lucy's planned asteroid visits up to eleven.

Animation of Lucy's trajectory

Around the Sun
  21900 Orus

Around the Sun – frame rotating with Jupiter
  Jupiter

  Lucy ·   Sun ·   Earth ·   52246 Donaldjohanson ·   3548 Eurybates ·   617 Patroclus

• DESTINY+, a planned JAXA mission to fly by multiple asteroids.
• MBR Explorer, a planned UAESA mission to fly by various main belt asteroids.
• Jupiter Icy Moons Explorer, an ESA mission to the Jupiter system.
• OKEANOS, a proposed solar sail mission to Jupiter Trojans.

Wikimedia Commons has media related to Lucy (spacecraft).

• Mission website at NASA.gov
• NASA's New Discovery Missions: Psyche and Lucy on YouTube
• Lucy: NASA's mission to Jupiter's Trojans at eoPortal
• Designing Lucy’s Path to the Trojan Asteroids