Tracer use in the oil industry
From Wikipedia - Reading time: 6 min
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
Tracers are used in the oil industry in order to qualitatively or quantitatively gauge how fluid flows through the reservoir,[1] as well as being a useful tool for estimating residual oil saturation. Tracers can be used in either interwell tests or single well tests.[2] In interwell tests, the tracer is injected at one well along with the carrier fluid (water in a waterflood or gas in a gasflood) and detected at a producing well after some period of time, which can be anything from days to years. In single well tests, the tracer is injected into the formation from a well and then produced out the same well. The delay between a tracer that does not react with the formation (a conservative tracer) and one that does (a partitioning tracer) will give an indication of residual oil saturation, a piece of information that is difficult to acquire by other means.
Tracers can be radioactive or chemical, gas or liquid and have been used extensively in the oil industry and hydrology for decades.[3]
References
[edit]- ^ "Using interwell chemical tracers and the coherence cube to understand reservoir communication" Oil & Gas Journal. Retrieved 2023-06-20.
- ^ "Reservoir Characterization" American Oil & Gas Reporter. Retrieved 2023-06-20.
- ^ "Using Tracer Technology In Unconventional Wells" Hart Energy. Retrieved 2023-06-20.
 | This article related to natural gas, petroleum or the petroleum industry is a stub. You can help Wikipedia by expanding it. |
EncycloReader
is supported by the 
KSF