Categories
  Encyclosphere.org ENCYCLOREADER
  supported by EncyclosphereKSF

Triumph Trophy (T300)

From Wikipedia - Reading time: 6 min
This article is about the 1990s Trophy 900 and 1200. For other Triumph Trophy motorcycles, see Triumph Trophy (set index).
Trophy 900/1200
ManufacturerTriumph Motorcycles Ltd
Production1991–2003
AssemblyHinckley
ClassTouring motorcycle
Engine885 cc (54.0 cu in) (1200: 1,180 cc (72 cu in)) four-stroke triple/four
Bore / stroke76 x 65 mm
Compression ratio10.6:1
Power100 PS (74 kW) at 9,000 rpm (1200: 141 PS (104 kW) at 9,000 rpm)
Torque79.9 N⋅m (58.9 lbf⋅ft) at 6,500 rpm (1200: 114.1 N⋅m (84.2 lbf⋅ft) at 8,000 rpm
Ignition typeElectronic
TransmissionSix-speed
Frame typeTubular high-tensile steel
Suspension43 mm telescopic forks, gas-pressurised rear monoshock
Tires120/70R17 front, 160/60R18 rear
Wheelbase59 in (1,490 mm)
Seat height31 in (800 mm)
Weight900: 489 lb (222 kg), 1200: 529 lb (240 kg) (dry)
900: 549 lb (249 kg), 1200: 589 lb (267 kg) (wet)
Fuel capacity25 L (5.5 imp gal; 6.6 US gal) (includes 5 L (1.1 imp gal; 1.3 US gal) reserve)
RelatedTriumph Trident
Footnotes / references
1991 specifications [1]

The Triumph Trophy (model codes T336 and T340) is a three or four-cylinder touring motorcycle of either 885 cc or 1,180 cc capacity. These bikes were produced from 1991 to 2003 at Hinckley, Leicestershire, England, by Triumph Motorcycles Ltd, the successor business to the defunct Triumph Engineering at Meriden Works, Warwickshire, England.

Overview

[edit]
Trophy 1200, 1996 updated bodywork

A range of new 750 cc and 900 cc triple-cylinder bikes and 1,000 cc and 1,200 cc four-cylinder bikes were launched at the September 1990 Cologne Motorcycle Show.[2] The motorcycles used famous model names from the glory days of Meriden Triumph and were first made available to the public between March (Trophy 1200 being the first) and September 1991.[3] The range had been revealed to the press in June 1990 at the Hinckley Factory and were introduced to the public in December at the International Motorcycle Show at the National Exhibition Centre, Birmingham.[4]

The Trophy uses a modular liquid-cooled double overhead camshaft (DOHC) engine design in a steel frame with a large-diameter backbone design. The modular design ensured that a variety of models could be offered whilst keeping production costs under control.[5]

Frame and cycle parts

[edit]

The high-tensile steel tubular frame has a large diameter spine based on that of the Triumph Bonneville T140, though engine oil is not held in the frame. Japanese companies supplied cycle parts including Nissin (hydraulic disc brakes) and Showa or Kayaba for the front telescopic fork suspension.[6]

Development

[edit]

In 1996 a wind tunnel tested twin-headlight full fairing was added along with optional hard luggage.[7]

See also

[edit]

References

[edit]
Wikimedia Commons has media related to Triumph Trophy 900 and Triumph Trophy 1200.

Notes

[edit]
  1. ^ Clarke 2012, p. 82.
  2. ^ Clarke 2012, p. 42.
  3. ^ Clarke 2012, p. 43.
  4. ^ Clarke 2012, p. 42.
  5. ^ Clarke 2012, p. 23.
  6. ^ Clarke 2021, p. 17.
  7. ^ Clarke 2012, p.85.

Bibliography

[edit]
  • Clarke, David (2012). Hinckley Triumphs: The First Generation. Crowood Press. ISBN 978 1 84797 341 2.
  • Clarke, David (2021). First Generation Hinckley Triumph (T300) Motorcycles: Maintenance, restoration and modification. Crowood Press. ISBN 978 1 78500 943 3.
Licensed under CC BY-SA 3.0 | Source: https://en.wikipedia.org/wiki/Triumph_Trophy_(T300)
17 views |
↧ Download as ZWI file
Encyclosphere.org EncycloReader is supported by the EncyclosphereKSF