In the United States, commercial truck classification is determined based on the vehicle's gross vehicle weight rating (GVWR). The classes are numbered 1 through 8.[2][3] Trucks are also classified more broadly by the Federal Highway Administration (FHWA), which groups classes 1 and 2 as light duty, 3 through 6 as medium duty, and 7 and 8 as heavy duty. The Environmental Protection Agency (EPA) has a separate system of emissions classifications for trucks.[2][4] The United States Census Bureau also assigned classifications in its Vehicle Inventory and Use Survey (VIUS)[5] (formerly Truck Inventory and Use Survey (TIUS)).[6]
United States federal law requires drivers to have a commercial driver's license (CDL) to operate heavy-duty vehicles (Class 7 and 8) in commerce, with the exception of emergency vehicles and vehicles strictly used for recreational and/or agricultural purposes, though it allows states to require a CDL for these vehicles under their discretion.[7] A CDL is also required to operate any vehicle that transports at least 16 passengers (including the driver) or hazardous materials requiring placards under federal and state law regardless of the weight of the vehicle.[8][2][9][10] States may extend CDL requirements for additional vehicles, for example, New York requires a CDL to operate a stretched limousine and California requires a CDL for any vehicle with three or more axles that has a gross vehicle weight rating of over 6,000 pounds.[11][12]
When light-duty trucks were first produced in the United States, they were rated by their payload capacity in tons: 1⁄2 (1000 pounds), 3⁄4 (1500 pounds) and 1-ton (2000 pounds). Ford had introduced the "One-Tonner" in 1938 to their line of trucks.[23] The "Three-quarter-tonner" appeared in the Ford truck lineup in 1939.[23] Over time, payload capacities for most domestic pickup trucks have increased while the ton titles have stayed the same. The 1948 Ford F-1 had a Gross Vehicle Weight Rating (GVWR) of 4700 pounds.[24] The truck was marketed with a "Nominal Tonnage Rating: Half-Ton."[24] The actual cargo capacity had increased to 1450 pounds.[24] Ford adopted this promotional nomenclature in 1948 to assist buyers, sellers, and users.[23] The now-imprecise ton rating has continued since the post World War II era to compare standard sizes, rather than actual capacities.[25][26] In 1975, a change in U.S. emission laws required any vehicle under 6000 pounds GVWR to burn unleaded fuel. U.S. pickup truck manufacturers responded with a "heavy half" pickup of over 6000 pounds GVWR.[23] The F-150 had a capacity of over 2000 pounds, compared to 1500 pounds for the F-100.[27]
This has led to categorizing trucks similarly, even if their payload capacities are different. The Chevrolet Silverado/GMC Sierra 1500, Ford F-150, Nissan Titan, Ram 1500, and Toyota Tundra are called "half-ton" pickups (1⁄2-ton). The Chevrolet Silverado/GMC Sierra 2500, Ford F-250, and Ram 2500 are called "three-quarter-ton" pickups. The Chevrolet Silverado/GMC Sierra 3500, Ford F-350, and Ram 3500 are known as "one ton" pickups.[26]
Similar schemes exist for vans and SUVs (e.g. a 1-ton Dodge Van or a 1⁄2-ton GMC Suburban), medium duty trucks (e.g. the 11⁄2-ton Ford F-550) and some military vehicles, like the ubiquitous deuce-and-a-half.
Some pickup trucks may be marketed as heavy duty (eg Ram Heavy Duty), super duty (eg Ford Super Duty) or simply "HD". This is not to be confused with the truck classification of class 7 and 8 being heavy duty.
The Class 8 truck gross vehicle weight rating (GVWR) is a vehicle with a GVWR exceeding 33,000 lb (14,969 kg).[2][28] These include tractor trailer tractors, single-unit dump trucks of a GVWR over 33,000 lb, as well as non-commercial chassis fire trucks; such trucks typically have 3 or more axles.[29]The typical 5-axle tractor-trailer combination, also called a "semi" or "18-wheeler", is a Class 8 vehicle.[30] Standard trailers vary in length from 8 ft (2.4 m) containers to 57 ft (17 m) van trailers, with the most common length being the 53 ft (16 m) trailer.[31] Specialized trailers for oversized loads can be considerably longer. Commercial operation of a Class 8 vehicle in the United States requires either a Class-B CDL for non-combination vehicles, or a Class-A CDL for combination vehicles (tractor-trailers).[32] Industries that generally use Class 8 trucks are long-distance freight transportation, construction, and heavy equipment moving.[33]
Vehicle classifications vary among provinces in Canada, due to "differences in size and weight regulations, economic activity, physical environment, and other issues".[34]: 3 While several provinces use their own classification schemes for traffic monitoring, Manitoba, Ontario, Prince Edward Island and Saskatchewan have adopted the 13-class system from the United States' Federal Highway Administration—sometimes with modifications, or in Ontario's case, for limited purposes.[34]: 3–4 [needs update]British Columbia and Ontario also distinguish between short- and long-combination trucks.[34]: 3–4 [needs update] In accident reporting, eight jurisdictions subdivide trucks by GVWR into light and heavy classes at approximately 4500 kg (9921 lb).[34]: 6
Vehicle categories on a European driving licence include (among others) B for general motor vehicles, C for large goods vehicles, D for large passenger vehicles (buses), and are limited by the Gross Vehicle Weight Rating and number of passenger seats.[35]
The general categories are further divided as follows:
appending the number 1 to the licence class C or D denotes the "light" versions of said class (e.g., Minibus, or medium truck).
appending the letter E allows for trailers of larger Gross Trailer Weight Rating (GTWR) than permitted by the standard licence category.
For the "trailer" categories, a separate driving test is generally required (e.g., "C", and "CE" require separate tests).
The licence categories that deal with trucks are B and C:
Class B permits the use of vehicles with GVWRs of not more than 3500 kg plus a trailer with GTWR not exceeding 750 kg; or, a trailer above this limit so long as the combined gross weight of car and trailer does not exceed 3500 kg (in some jurisdictions a higher combined weight limit of 4250 kg is permitted after a theoretical and practical course of seven hours, but this permission is not transferable between EU countries).
Class B covers both standard passenger cars of all sizes as well as vehicles that are specifically designed for transport of goods. The latter are commonly known as light commercial vehicles (LCVs), and include vans such as the Ford Transit, Mercedes-Benz Sprinter and Fiat Ducato, as well as pickup trucks such as the Ford Ranger or Mitsubishi Triton.
Class BE allows a trailers of up to 3500 kg GTWR to be used while driving a class B vehicle.
Class C1 raises the GVWR limit to 7500 kg and permits a trailer with GTWR not exceeding 750 kg.[36]
Class C removes the GVWR limit of Class C1, but the GTWR limit for the trailer of 750 kg remains. (This often referred to as a "Rigid Heavy Goods Vehicle" or "Rigid truck" licence)
Class C1E allows for a class B or C1 vehicle and a trailer of more than 750 kg GTWR, so long as the combined gross weight does not exceed 12000 kg.
Class CE removes all weight limits for a Class C vehicle with trailer. (known as an "Articulated Heavy Goods Vehicle", or often simply "HGV", licence )
^ abcdClayton, Alan; Montufar, Jeannette; Middleton, Dan; McCauley, Bill (August 27–31, 2000), "Feasibility of a New Vehicle Classification System for Canada"(PDF), North American Travel Monitoring Exhibition and Conference (NATMEC) 2000, archived from the original(PDF) on November 1, 2004, retrieved August 9, 2013, Furthermore, the fleet characteristics vary significantly from jurisdiction to jurisdiction across the country because of differences in size and weight regulations, economic activity, physical environment, and other issues. This has led to a wide variety of vehicle classification systems used by highway agencies and municipal authorities in their traffic monitoring programs.