Army NCOs wearing rifle–green berets with organizational beret flashes from (right to left) 1st, 5th, 7th, and 10th Special Forces Groups bearing the 1st Special Forces Regiment DUI
An Army warrant officer wearing maroon beret with 1st Battalion, 160th Special Operations Aviation Regiment Beret Flash bearing polished metal Chief Warrant Officer Two rank insignia
An Army officer wearing tan beret with 75th Ranger Regiment Beret Flash bearing polished metal lieutenant colonel rank insignia
An Army officer wearing black beret with Department of the Army Beret Flash bearing polished medal Chaplain (Christianity) Branch Insignia
An Air Force officer wearing navy-blue beret with Security Forces Officer Beret Flash bearing polished medal second lieutenant rank insignia
An Air Force officer wearing black beret with TACP Beret Flash and Crest bearing miniature polished metal captain rank insignia
An Air Force airman wearing gray beret with Combat Weather Team Beret Flash and Crest
An Air Force officer and Army NCO wearing maroon berets with Joint Communications Support Element Beret Flash, the officer affixing his polished metal colonel rank insignia and the NCO her unit's DUI
In the United States (US) military, a beret flash is a shield-shaped embroidered cloth that is typically 2.25 in (5.72 cm) tall and 1.875 in (4.76 cm) wide with a semi–circular base that is attached to a stiffener backing of a military beret.[1][2][3] These flashes—a British English word for a colorful cloth patch attached to military headgear—are worn over the left eye with the excess cloth of the beret shaped, folded, and pulled over the right ear giving it a distinctive appearance.[1][2][4]
The design of all US Department of Defense (DoD) beret flashes are created and/or approved by The Institute of Heraldry, Department of the Army.[8] When a requesting organization is entitled to have its own beret flash, the institute will conduct research into the requesting organization's heraldry, as well as design suggestions from the requesting organization, in the creation of a unit or specialty beret flash.[9][10] Leveraging geometrical divisions, shapes, and colors a heraldic artist will create a design that will represent the history and mission of the requesting organization.[9][10] Once the organization agrees upon a design, the institute will authorize the creation of the new beret flash and will establish manufacturing instructions for the companies authorized to produce heraldic materials for the DoD.[9][10][11][12] The institute will also monitor the production of the new beret flash to ensure quality and accuracy of the design is maintained.[9][10][11]
Throughout its history, Army units have adopted different headgear and headgear devices—such as various colored cords, colored stripes, and insignias—to identify specific units, the unique mission of a unit, and/or the unique role of a soldier.[3][13][14][15] According to some historians, the first US use of a military beret device was a beret flash created by the 509th Parachute Infantry Battalion of World War II (WWII).[2][16][17][18] The 509th trained with the British 1st Airborne Division and was made honorary members of the British airborne forces in 1943.[17][18][19] This honor authorized the 509th to wear the British paratrooper's maroon beret.[17][18][19] Some 509th paratroopers had a small hand–embroidered version of their regiment's pocket–patch created for use as their beret flash on their honorary maroon berets.[2][16][17][18][20] The design of the 509th's pocket–patch—and thus the first organizational beret flash of the US Army—depicts a stylized figure of a paratrooper standing at an open aircraft door wearing a reserve parachute with an artistic rendering of the number "509" surrounding the paratrooper's head and the name Geronimo displayed at the base of the door all embroidered in gold on a black shield-shaped cloth with a semi–circular top.[2][16][17][18][20]
11th Special Forces Group Recognition Bar—note the similarity in design between the group's beret flash and recognition bar
A medical corps paratrooper with the 11th Special Forces Group wearing rifle-green beret with 1st Special Forces Regiment DUI affixed above the 11th Special Forces Group recognition bar (c. 1967)[21]
The official start of the Army's beret flashes began in 1961 with Department of the Army Message 578636 authorizing the establishment of organizational beret flashes for wear on the special forces'rifle–green beret.[2][22] Championed and heavily influenced by Lieutenant GeneralWilliam P. Yarborough (Ret.)—creator of the US Army parachutist badge, airborne background trimming, and established the term "beret flash" in US military lexicon—the message described the beret flash as shield–shaped with a semi–circular base made of felt 2 in (51 mm) tall and 1.625 in (41 mm) wide using solid colors to represent each of the special forces groups of the era.[2][22][23][24] The message also described who was authorized to wear the organizational beret flash stating that only special forces qualified paratroopers would be permitted to wear their special forces unit's organizational beret flash.[22] These organizational beret flashes were to be worn centered over the left eye with either the 1st Special Forces RegimentDUI, polished metal officer rank insignia, or chaplain branch insignia positioned below their parachutist badge and centered on the beret flash.[3][22] Later, the parachutist badge was removed and non–qualified soldiers assigned to a special forces unit wore a rectangular cloth beret flash, known as a recognition bar, 1.875 in (4.76 cm) long and 0.5 in (1.27 cm) wide color and pattern matched to their group's organizational beret flash.[3][25][26] The recognition bar was worn below their 1st Special Force Regiment DUI, polished metal officer rank insignia, or chaplain branch insignia on the rifle–green beret.[3][25]
Various beret accoutrements began to appear in the 1960s and 1970s, particularly between 1973 and 1979 when the Department of the Army had its morale–enhancing order in effect and different colored berets began to be worn by numerous units and branches of the Army.[27][28][29][30]
Historical photographs from the 1960s through the 1970s show soldiers assigned to reconnaissance, ranger, and armor units informally wearing black berets with various units affixing a wide variety of custom beret flashes that were worn over the left eye or left temple.[30] In 1975, the Army formally authorized its ranger units to wear the black beret.[31] If earned, some of these ranger units had their rangers affix their Ranger Tab to the top edge of their organizational beret flash along with their regiment or unit DUI, polished metal officer rank insignia, or chaplain branch insignia affixed to its center and worn over the left eye.[30][31][32]
An infantryman with 1st Cavalry Division, 1st Brigade, 2nd Battalion, 8th Cavalry, Reconnaissance Platoon wearing black beret with platoon beret flash (1970)[30]
Ranger unit example
Ranger Department Beret Flash
An infantry NCO with the US Army Infantry School wearing black beret with Ranger Department Beret Flash bearing 75th Ranger Regiment DUI below his Ranger Tab (c. 1975)[33]
Wearing of the black beret by armor units expanded in the 1970s with some adopting organizational beret flashes.[28][29][30] For example, many US Army armor units stationed in West Germany, such as the 1st Armored Division, 2nd Armored Cavalry Regiment, and 11th Armored Cavalry Regiment, began wearing black berets in the 1970s with the armored cavalry regiments affixing maroon and white ovals for use as their beret flash.[28][29][30] The oval beret flash was worn vertically on the black beret behind their DUI to the left of their metal rank insignia or chaplain branch insignia and positioned over the left temple.[28][29][30][34] Another example is the Army's "triple capability" experiment with the 1st Cavalry Division that outfitted the division for armor, airmobile, and air cavalry warfare in 1971.[35][36] The division decided that its soldiers should wear different colored berets to represent the capability they brought to the division: black for armor, light–blue for infantry, red for artillery, and kelly–green for support—later settling for black berets across all formations.[30][35] As they became available, 1st Cavalry soldiers would affix a battalion or squadron specific organizational beret flash of various shapes, colors, and materials to their beret.[2][30] Historical photographs show many 1st Cavalry soldiers wearing their berets in the same manner as US armored cavalry soldiers in West Germany.[30][34] The use of black berets extended to training units as well, such as the US Army Training and Doctrine Command and its armor school.[28][29][30] Historical photographs of the era show plastic triangles being worn on black berets of US Army Armor Schoolcadre and were worn in the same manner as beret flashes are today.[30]
Armored Cavalry Regiment example
Armored Cavalry Oval Beret Flash
An artillery NCO with the 11th Armored Cavalry Regiment wearing black beret with subdued sergeant rank insignia next to the Armored Cavalry Oval bearing his regiment's DUI (c. 1973–1974)[29][30][37][38]
1st Cavalry Division example
1st Battalion, 12th Cavalry Beret Flash
An infantryman with the 1st Cavalry Division wearing black beret with polished brass specialist four rank insignia next to the 1st Battalion, 12th Cavalry Beret Flash bearing the 12th Cavalry Regiment DUI (1976)[39]
US Armor School example
US Army Armor School Instructor Flash (made of plastic)
An armor officer with the US Army Training and Doctrine Command, US Army Armor School wearing black beret with Armor School Instructor Flash bearing polished metal captain rank insignia (1976)[30]
In 1973, Army leaders authorized the wear of the maroon beret by airborne forces.[27][30] Within a year or so, paratroopers of the 82nd Airborne Division began incorporating organizational beret flashes onto their maroon berets pattered after their unit's airborne background trimming.[1][40][30] These organizational beret flashes, representing various units of the 82nd, were worn in the same manner as they are today.[1][40] Similarly, in 1974 Army leaders authorized the 101st Airborne Division to wear the dark–blue beret when it was reorganized into an air assault division at Fort Campbell.[14][28][30][41][42][43] Army articles and historical photographs of 101st soldiers show them wearing organizational beret flashes patterned after their unit's airborne background trimming and were affixed with either their polished metal rank insignia, DUI, or chaplain branch insignia centered on the beret flash and worn over the left eye.[1][14][30][41][43] Between 1976 and 1977, 101st soldiers would affix their Airmobile Badge—renamed Air Assault Badge in 1978—to their berets positioned over their left temple, next to their beret flash.[14][30][43][44] Other Fort Campbell units of the era also wore the dark–blue beret as well as red for headquarters command and light-green for military police, all with traditional organizational beret flashes that were worn in the same manner as they are today.[28][30]
A paratrooper with the 82nd Airborne Division wearing maroon beret with 1st Battalion, 508th Infantry Beret Flash bearing his regiment's DUI (1975)[40]—note the design similarities between the airborne background trimming and beret flash
An engineer officer with the 101st Airborne Division wearing dark–blue beret with 326th Engineer Battalion Beret Flash bearing polished metal lieutenant colonel rank insignia next to his Airmobile Badge (1977)[30]—note the design similarities between the airborne background trimming and beret flash
Arctic–qualified soldier example
1st Battalion, 60th Infantry Beret Flash
An arctic–qualified infantryman with the 172nd Infantry Brigade wearing olive–drab beret with 1st Battalion, 60th Infantry Regiment Beret Flash bearing his regiment's DUI (c. 1970s)[30][45]
By 1979, the Army put a stop to the use of berets by conventional forces, leaving only special forces and ranger units the authority to wear berets.[28][29][30]
In 1980, the Army reversed part of its decision allowing airborne units to wear maroon berets, ranger units black berets and special forces units rifle–green berets.[28][29][46] The Army's 1981 uniform regulation describes the wear of these berets with the only authorized accoutrements being organizational beret flashes or recognition bars with officer rank insignia, chaplain branch insignia, or DUI affixed.[3][47]
The organizational beret flash did not become the norm across the Army until 1984 when the recognition bar was discontinued after the Special Forces Tab became authorized for wear by special forces qualified paratroopers.[25] Today, all paratroopers assigned to a special forces unit wear their unit's organizational beret flash on either a rifle–green beret, for special forces qualified paratroopers, or a maroon beret, for support paratroopers.[1][48]
Example of modern-day wear of special forces organizational beret flashes
7th Special Forces Group Beret Flash
Two officers, one wearing a maroon beret and the other a rifle-green beret, with 7th Special Forces Group Beret Flash and polished metal major rank insignia affixed; the special forces qualified officer is identified by his rifle-green beret and tab (2017)[1][48]
In 2000, the Chief of Staff of the Army, GeneralEric Shinseki, decided to make the black beret the standard headgear of the Army.[29] This was codified in regulations in 2001 and was amended in 2011 making the black beret optional headgear with certain uniforms.[1][46][49] Due to this change, the 75th Ranger Regiment was authorized to switch from black to tan berets in 2001, given the black beret was no longer a distinctive uniform item for the regiment.[29][46] General Shinseki also decided that a new Department of the Army Beret Flash be worn on the black beret.[8][29][50] According to The Institute of Heraldry, the Department of the Army Beret Flash is designed to resemble the flag of the Commander-in-Chief of the Continental Army, General George Washington, that was flown at the siege of Yorktown during the American Revolutionary War.[29][51][52] General Washington's flag was an almost square light–blue flag—representing the union of the United States flag—with thirteen white stars—representing the Thirteen Colonies.[29][51][52][53] According to Department of the Army Pamphlet 670–1, the Department of the Army Beret Flash is to be worn by all units "unless authorization for another flash was granted before implementing the black beret as a standard Army headgear."[1][9]
Department of the Army Beret Flash
Photograph of General Washington's Sun faded Commander–in–Chief flag (c. 1775-1783)[51]
Example of the beret flash exception on the Army black beret
55th Signal Company Beret Flash
Signal Corps NCOs wearing maroon and black berets with 55th Signal Company Beret Flash and 114th Signal Battalion DUI—only the 55th's Airborne Combat Camera Documentation Team is authorized to wear the maroon beret but the beret flash was authorized for the company prior to the establishment of the Department of the Army Beret Flash (2012)[1][55]
First organizational beret flash authorized for a non–airborne unit since 1979[1][9][29]
1st SFAB Beret Flash
A soldier with 1st SFAB wearing brown beret with unit beret flash and DUI affixed (2018)[56]
Army units can request an organizational beret flash for their formation from The Institute of Heraldry given it is not for wear on the black beret.[1][9][57] A good example of this is The Institute of Heraldry's 2018 authorization of organizational beret flashes for the Security Force Assistance Command and its brigades (SFABs) for wear on their brown beret.[58][59][60][61][62][63][64]
Example of the Special Forces Beret Flash
Special Forces (generic) Beret Flash
A special forces qualified officer wearing rifle–green beret with a generic (non–unit specific) Special Forces Beret Flash and polished metal general rank insignia affixed (2019)[65]
In the 21st century, unlike the Department of the Army Beret Flash, Army organizational beret flashes signify a specific formation of a specialized unit, such as an active airborne, ranger, special forces, or combat advisor unit.[1][15][27][66] However, there is a unique generic Special Forces Beret Flash worn by special forces qualified paratroopers on their rifle–green beret when assigned to a unit not authorized an organizational beret flash; this is due to the rifle–green beret now representing a paratrooper's special forces qualification—in addition to the Special Forces Tab—rather than a special forces unit as it once did in the 60s, 70s, and 80s.[1][25]
In the mid 1960s, Air Force commando weathermen,[67] formally known as weather parachutists, with Detachment 26 of the 30th Weather Squadron and Detachment 32 of the 5th Weather Squadron informally wore black berets.[68] A black cloth rectangle with a yellow embroidered anemometer surmounted by a fleur–de–lis with the words "Combat Weather" split by the anemometer was used as their beret flash.[68]
From 1970 through the 1980s, weather parachutists with the 5th Weather Squadron wore maroon berets with an Army style beret flash that incorporated the squadron's design and colors from their emblem's alchemical symbol for water and affixed their Parachutist Badge to the flash.[9][68]
In 1979, weather parachutists were authorized to wear navy–blue berets with an Army style beret flash consisting of a blue and black field surrounded by yellow piping.[9][68] Enlisted and NCOs affixed their Parachutist Badge to the flash while officers affixed their polished metal rank insignia.[68] In 1986, the gray beret was authorized for wear by weather parachutists who continued to wear the aforementioned cloth beret flash until a new large color metallic Special Operations Weather Team Crest was authorized.[68]
In 1992, the Air Force approved the return of the weather parachutist's blue, black, and yellow beret flash from the late 1970s to present and affixed their large color metal Special Operations Weather Team Crest to it.[68]
Special Operations Weather Team example
Special Operations Weather Team Beret Flash
A weather parachutist with AFSOC's 107th Weather Flight wearing gray beret with Special Operations Weather Team Beret Flash and Combat Weather Team Crest (2008)[69]
In 1996, weather parachutists assigned to Air Force Special Operations Command (AFSOC) began wearing a new Army style beret flash, known as the Special Operations Weather Team Beret Flash, while those assigned to Air Combat Command, known as combat weather teams, continued to wear the blue, black and yellow beret flash.[9][68][70] The Special Operations Weather Team Beret Flash consisted of a red border representing the blood shed by their predecessors, a black background representing special operations, and three diagonal lines of various colors representing the services they supported (green=Army, purple=joint forces, and blue=Air Force).[68] Officers affixed their polished metal rank insignia while enlisted and NCOs affixed their Parachutist Badge to the Special Operations Weather Team Beret Flash until 2002 when the Combat Weather Team Crest was created.[68] The Combat Weather Team Crest was affixed to both Special Operations Weather Team and Combat Weather Team Beret Flashes by enlisted and NCOs while officers continued to affix their polished metal rank insignia.[6][68][69][71]
In 2007/2008, the Special Operations Weather Team Beret Flash stopped being worn by AFSOC weather parachutists while the Combat Weather Team Beret Flash continues to be worn by combat weather teams to this day.[4][6][72]
A security policeman with the 1041st Security Police Squadron wearing dark–blue beret and unit beret flash (c. 1967)[73]
In 1966/67, the newly formed 1041st Security Police Squadron was authorized to wear a dark–blue beret with a unique organizational beret flash.[73][74][75] The 1041st's beret flash has a depiction of a white falcon carrying a pair of lightning bolts on a somewhat heart-shaped light–blue cloth shield that was worn over the left temple.[73][74][75]
Security Forces example
Security Forces Beret Flash
A security forces airman with the 55th Security Forces Squadron wearing navy–blue beret with Security Forces Beret Flash (1998)[76]
In 1997, the Air Force stood up the security forces AFSC, combining Air Force police and security forces into one carrier field, and honored the heraldry of the 1041st Security Police Squadron by creating a new organizational beret flash for all security forces airman and NCOs for wear on their dark-blue beret.[4][74] The new Security Forces Beret Flash depicts the 1041st's falcon over an airfield on a dark–blue shield–shaped patch bordered in gold with a white scroll at its base embroidered with the motto "Defensor Fortis" (defenders of the force) in dark–blue title case.[4][74] Security forces officers wear the same basic beret flash minus the embroidered falcon and airfield and in its place they affix their polished metal rank insignia.[4]
An Air Mobility Liaison Officer with the 8th Air Support Operations Squadron wearing black beret with Air Mobility Liaison Officer Beret Flash and polished metal captain rank insignia affixed (2011)[77]
In 1979, TACP airman and NCOs were given authorization to wear the black beret. In 1984, two TACP's submitted a design for a unique beret flash and crest for wear on their berets which the Air Force approved one year later.[28] The TACP Beret Flash consists of a scarlet border that represent the firepower TACP's bring to bear with two dovetailed fields of blue and green representing the close working relationship between the Air Force and the Army that is enabled by the TACP.[78] TACP officers also wear the TACP Beret Flash and Crest but with miniature polished metal rank insignia below the crest.[4][79][80]
Some Air Mobility Liaison Officers also wore the black beret.[28] Although worn informally, in 2015 The Institute of Heraldry authorized a slight modification of the TACP Beret Flash for wear by Air Mobility Liaison Officers, incorporating an embroidered compass rose in the upper–left corner of the flash.[77][83] The Air Mobility Liaison Officer Beret Flash was worn in the same manner as Air Liaison Officers wear the TACP Beret Flash.[77][84]
An NCO (left) and an officer (right) with a combat aviation advisor squadron are wearing brown berets with Combat Aviation Advisor Beret Flash with the officer affixing his metal major rank insignia (2018)[85]
From 2018–2022, AFSOC authorized the wear of the brown beret for airman, NCOs, and officers assigned to combat aviation advisor squadrons, such as the 6th and 711th Special Operations Squadrons.[85][86] The brown beret—similar to the Army's brown beret—was worn with an Army style organizational beret flash consisting of a blue field with olive–green diagonal stripes and border.[9][85] The Combat Aviation Advisor Beret Flash was worn centered over the left eye with polished metal officer rank insignia, chaplain branch insignia, or an AFSC metallic beret crest affixed to the beret flash while all other advisors wore it without accoutrements.[85][87]
In the 1960s, select US Navyriverine patrol units operating in South Vietnam adopted the black beret to be part of their daily uniform and wore various accouterments on their berets.[88][89] In 1967, the Commander of the Riverine Patrol Force sent an official message to the Commander of River Patrol Flotilla Five authorizing the wear of the black beret.[89] In this message, the wear and appearance of the beret was defined stating, "Beret will be worn with river patrol force insignia centered on right side" and "Only standard size river patrol force insignia will be worn on beret. ... No other emblem or rank insignia will be displayed on beret."[89][90] Today, these US Navy small boat units honor their heritage by wearing the black beret during special occasions—such as induction ceremonies into the Gamewardens Association[91]—and will affix historically relevant riverine task force insignia for use as their beret flash.[92][93][94][95]
Examples of US Navy riverine units' use of the black beret
Riverine Patrol Force, Task Force 116 Insignia
Chief of Naval Operations (left) and Commander, Riverine Patrol Force (right) wearing black berets with Task Force 116 Insignia (1969)[96]
A Navy NCO from Riverine Squadron 1 receives the black beret with Task Force 116 Insignia at a ceremony making him an honorary "Gamewarden" (2011)[93]
With the proliferation of military berets from the Army's 1973 morale–enhancing order,[27][28] this section focuses on beret flashes from that point forward.
If more than one organizational beret flash existed for a unit, only those flashes with large design changes or are historically noteworthy are depicted.
Current beret flashes were identified through current uniform regulations, recent military articles, and/or official postings on social media.
Obsolete beret flashes were identified through reliable sources or two or more independent sources.
For more information on a specific beret flash, visit the file page for a given graphic.
–Texas Army National Guard, 143rd Infantry Regiment, Company G (Ranger) –Texas Army National Guard, 143rd Infantry Regiment, Company G (Long-Range Surveillance)
–Indiana Army National Guard, 219th BfSB, 152nd Cavalry Regiment, 2nd Squadron, Troop C (Long-Range Surveillance) –38th Infantry Division, 151st Infantry Regiment, Company D (Long-Range Surveillance) –Indiana Army National Guard, 151st Infantry Regiment, Company D (Ranger)
–Texas Army National Guard, 143rd Infantry Regiment, Company G (Long-Range Surveillance) –Texas Army National Guard, 143rd Infantry Regiment, Company G (Ranger)
–1st Special Forces, 19th Special Forces Group, 297th Military Intelligence Company –XVIII Airborne Corps, 525th Military Intelligence Brigade, 337th Military Intelligence Battalion
US Army Armor School, 194th Armored Brigade, 3rd Field Artillery, 3rd Battalion (made of plastic)
–US Army Armor School, 194th Armored Brigade, 10th Cavalry Regiment, Troop D (Long-Range Surveillance) –US Army Reserve Officers' Training Corps, Temple University –Various other units (see "Armor and cavalry" section)
–US Army Armor School, 194th Armored Brigade, 33rd Armor Regiment, 5th Battalion –US Army Armor School, 194th Armored Brigade, 37th Armor Regiment, 4th Battalion (made of plastic)
US Army Armor School, 194th Armored Brigade, 54th Infantry Regiment, 4th Battalion (made of plastic)
The US state defense forces—also known as state guard, state military reserve, or state militia—in many US states and territories wear modified versions of US Army uniforms.[8][98][99] To help separate state guard units from Army units, such as the Army National Guard, they will often wear unique name tape, badges, shoulder sleeve insignia, and/or headgear.[99] If the militia unit chooses to wear the Army black beret, a unique organizational beret flash is worn to help further distinguish them from Army units.[8][99][100][101][102][103][104] These state military reserve organizational beret flashes are worn in the same manner as today's Army beret flashes.[99][100][101][102][103][104] The following is a list of some organizational beret flashes worn by various state and territory militias:
State Defense Force (worn by various state guard units)
^ abcd"Big Picture: Your Army Reports: Number 10", US Army's The Big Picture (TV 713), hosted on PublicResourceOrg YouTube Channel, dated 1967, posted 31 December 2010, last accessed 28 August 2022
^ ab"TIOH Organization", Department of the Army, The Institute of Heraldry, last accessed 28 August 2022
^ ab"1st Battalion 22nd Infantry, Regulars 76–78, 1st Battalion 22nd Infantry 1976–1978", Image caption: (Photo taken when Don was with the 172nd INF BDE in Alaska, before being assigned to 1/22 Infantry. Note the olive drab beret. The 172nd was the only unit in the Army authorized to wear the olive beret.), by Don Krewson, dated 2011, last accessed 8 May 2021
^"55th Signal Company Class B inspection [Image 8 of 8]", Defense Visual Information Distribution Service, Defense Imagery Management Operations Center, by SGT Prentice Martin-Bowen (US Army), dated 31 May 2012, last accessed 1 March 2022
^"TACP – Flash and Crest Heraldry", unknown author but suspected to be US Air Force, hosted on ClearedHotProduction YouTube Channel, posted 20 March 2012, last accessed 31 May 2020
^"USAF, Air Mobility Liaison Officer, A-4-299", Department of the Army, The Institute of Heraldry (via the Eagles of War website), dated 20 January 2015, last accessed 6 September 2021
^"428-GX-USN 1142474", National Archives (2016/04/12)—hosted on Photograph Curator's Flickr page—by PH2 S.P. Langley (US Navy), dated August 1969, last accessed 21 June 2021
^"Ceremony brings sister cities together [Image 6 of 7]", Defense Visual Information Distribution Service, by PFC Paco Pineda (100th Mobile Public Affairs Detachment, Army National Guard), dated 7 June 2010, last accessed 30 October 2022