Uzhhorod–Košice broad-gauge track

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Uzhhorod–Košice broad-gauge track" – news · newspapers · books · scholar · JSTOR (October 2006) (Learn how and when to remove this message)

The Uzhhorod–Košice broad-gauge line is a single-track 1,520-mm-gauge railway mostly in eastern Slovakia, which is used especially for transporting iron ore from Ukraine to the steel works near Košice.

In the 1960s, after construction of the steel works in Košice, imports of iron ore to Slovakia rose steeply, and the checkpoint in Čierna nad Tisou could not handle this volume, particularly in winter, as Czechoslovakia and the Soviet Union had different gauges and all freight had to be transshipped. It was thus decided to build a Russian gauge line in Czechoslovakia to ease the bottleneck. Construction started on 4 November 1965, and the line opened on 1 May 1966. It was electrified in 1978.

Trains are hauled by two electric twin-unit locomotives, similar to the late versions of PKP's ET40 but with SA3 couplers instead of buffers and chain couplings, except of westbound between Trebišov and Ruskov where the gradient is over 15 ‰ and two sets of locos are needed. The train weights are up to 4,200 tonnes. This stretch has the heaviest catenary construction in the EU (2 work cables, 1 fitting cable and 3 additional cables).^{[citation needed]}

This line is for freight only, but there are some diesel motor cars for railway personnel.

• Length: 88.051 km (8 km in Ukraine).
• Gauge: 1,520 mm (4 ft 11+27⁄32 in), Russian gauge.
• Electrification: 3 kV DC overhead.
• Maximum speed: from Uzhhorod to Maťovce 50 km/h (31 mph), from Maťovce to Haniska pri Košiciach 60 km/h (37 mph).
• Stations: 2 (Maťovce, Haniska pri Košiciach).
• Crossing loops: 6 (Vojany, Budkovce, Trebišov, Červený Dvor, Slančík, Hornád).
• Depots: 1 (Haniska pri Košiciach).

Košice–Uzhhorod broad gauge line
Technical
Track gauge	1,520 mm (4 ft 11+27⁄32 in)
Route map Legend 12,576 Ужгород-1 trať do Čopu 8,7 Ужгород-2 0,9 Павлово 0,000 štátna hranica UA/SK 2,382 Maťovce ŠRT trať Bánovce nad Ondavou – Veľké Kapušany 10,456 Vojany ŠRT vlečka do elektrárne Vojany vlečka Vojany – elektráreň Vojany (1435 mm) Laborec 21,329 Budkovce ŠRT Ondava Trebišov ŠRT trať Humenné – Michaľany 53,532 Slivník (predtým Červený Dvor) ŠRT 65,700 Slančík ŠRT trať Košice – Čierna nad Tisou Torysa 77,808 Hornád ŠRT Hornád 86,210 trať Košice – Miskolc 87,159 Haniska pri Košiciach ŠRT U. S. Steel Košice

There are plans to extend the line 450 km westwards to Vienna in Austria. An agreement was signed between the railway operators of Austria, Slovakia, Ukraine and Russia in April 2010;^[1] they formed a new company, Breitspur Planungsgesellschaft, to develop the railway. In November 2010, the Slovak Prime Minister Iveta Radičová announced the Slovak government will not support the project, as it threatens the viability of the Košice area workplaces in the Dobrá bulk terminal, which would be unnecessary after the completion of the project.^[2] However, the project passed a feasibility study in December 2010.^[3] Construction was planned to start in 2013 and operation in 2016. The cost estimate is €6 bn.^[4] It will prove important (if really built) for the transport of containers, between Western Europe and Russia and China.^[1]

In May 2021 the Austrian government stated that it has no plans to approve the construction of the extension of the line.^[5]

• Čierna nad Tisou railway station, the break-of-gauge station for most other broad-gauge freight entering Slovakia from Ukraine
• Broad Gauge Metallurgy Line
• Košice–Vienna broad-gauge line

• Article about history of the railway (in Czech)