Trap

This page may qualify for speedy deletion because: misplaced title (would need to be more specific than "trap"); not much to learn here and no introductory sentence stating the scope; moving to user subpage is fine If you disagree or intend to fix it, and you have not contributed to it before, you may remove this notice. If you have contributed before and disagree, please explain why on the discussion page, after adding {{hangon}} to the top of the . This will alert curators and custodians to your intention, and may permit you the time to write your explanation. Before deleting check the discussion page, what links here, history (last edit), the page log, and Wikiversity:Deletions.

Materials[edit | edit source]

1. Scrap 1-by-1 inch wood boards
2. string
3. saw
4. hammer
5. glue

Determine the base size of the trap[edit | edit source]

Before starting doing anything, the size of the trap should be known, because all the rest depends on this step.

Build the top and base[edit | edit source]

Depending on the size chosen, pieces of one by one inch wood should be cut for the base and the top frame. Then, the top and base should be secured using glue, and make sure to let it dry. After that, the base and the top should be connected, and each conner should be secured again using glue. Then, the bottom space to let the villain in should not be forgotten.

Attach the cage and test it[edit | edit source]

After the glue is completely dry, wrap the cord along the pulley, attach it to the trap , and try it as many times as you want.