Plutonium Selenide
From Handwiki | Names | |
|---|---|
| Other names
Plutonium monoselenide, Plutonium(II) selenide
| |
| Identifiers | |
CAS Number
|
|
3D model (JSmol)
|
|
InChI
| |
SMILES
| |
| Properties | |
Chemical formula
|
PtSe |
| Molar mass | 323.024 |
| Appearance | Black crystals |
| Melting point | 2,075 °C (3,767 °F; 2,348 K) |
Solubility in water
|
insoluble |
| Hazards | |
| GHS Signal word | Warning |
| Related compounds | |
Other anions
|
Plutonium sulfide Plutonium telluride |
Other cations
|
Magnesium selenide Strontium selenide Barium selenide Iron(II) selenide Iron(III) selenide Lead(II) selenide Praseodymium selenide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
| Infobox references | |
Plutonium selenide is a binary inorganic compound of plutonium and selenium with the chemical formula PuSe.[1][2] The compound forms black crystals and does not dissolve in water.
Synthesis
Reaction of diplutonium triselenide and plutonium trihydride:
- [math]\ce{ 2 {Pu2Se3} + 2 {PuH3} ->[\text{1600 °C}] 4 {PuSe} + 3 {H2} }[/math]
Fusion of stoichiometric amounts of pure substances:
- [math]\ce{ {Pu} + {Se} ->[\text{220–1000 °C}] PuSe }[/math]
Properties
Plutonium selenide forms black crystals of a cubic system, space group Fm3m, cell parameters a = 0.57934 nm, Z = 4, structure of the NaCl type.[3][4]
With increasing pressure, two phase transitions occur: at 20 GPa into the trigonal system and at 35 GPa into the cubic system, a structure of the CsCl type.
Does not dissolve in water.
Magnetic susceptibility follows Curie-Weiss law.[5]
References
- ↑ Eyring, LeRoy; O'Keeffe, Michael (1970) (in en). The Chemistry of Extended Defects in Non-metallic Solids: Proceedings of the Institute for Advanced Study on the Chemistry of Extended Defects in Non-Metallic Solids, Casa Blanca Inn, Scottsdale, Arizona, April 16-26, 1969. North-Holland Publishing Company. p. 140. ISBN 978-0-7204-0164-6. https://books.google.com/books?id=WtHQAAAAMAAJ&q=Plutonium+selenide. Retrieved 6 August 2021.
- ↑ Burke, Robert (17 June 2013) (in en). Hazardous Materials Chemistry for Emergency Responders. CRC Press. p. 85. ISBN 978-1-4398-4986-6. https://books.google.com/books?id=XHfRBQAAQBAJ&q=plutonium+selenide&pg=PA85. Retrieved 6 August 2021.
- ↑ Gensini, M.; Gering, E.; Heathman, S.; Benedict, U.; Spirlet, J. C. (1 April 1990). "High-pressure phases of plutonium monoselenide studied by X-ray diffraction". High Pressure Research 2 (5–6): 347–359. doi:10.1080/08957959008203187. ISSN 0895-7959. Bibcode: 1990HPR.....2..347G. https://www.tandfonline.com/doi/abs/10.1080/08957959008203187?journalCode=ghpr20. Retrieved 6 August 2021.
- ↑ "WebElements Periodic Table » Plutonium » plutonium selenide". webelements.com. https://www.webelements.com/compounds/plutonium/plutonium_selenide.html.
- ↑ Macintyre, Jane E. (23 July 1992) (in en). Dictionary of Inorganic Compounds. CRC Press. p. 3783. ISBN 978-0-412-30120-9. https://books.google.com/books?id=9eJvoNCSCRMC&q=plutonium+selenide&pg=PA3783. Retrieved 6 August 2021.
 |  |
Categories: [Inorganic compounds] [Plutonium compounds] [Selenides] [Rock salt crystal structure]
↧ Download as ZWI file | Last modified: 08/03/2024 19:35:27 | 7 views
☰ Source: https://handwiki.org/wiki/Chemistry:Plutonium_selenide | License: CC BY-SA 3.0
KSF