Search for "SCSI" in article titles:

1. SCSI: SCSI (Small Computer System Interface) is a set of standards for physically connecting and transferring data between computers and peripheral devices. The SCSI standards define commands, protocols, and electrical and optical interfaces. [100%] 2023-06-26
2. SCSI: Small Computer System Interface (SCSI, /ˈskʌzi/ SKUZ-ee) is a set of standards for physically connecting and transferring data between computers and peripheral devices, best known for its use with storage devices such as hard disk drives. SCSI was introduced ... (Set of computer and peripheral connection standards) [100%] 2024-02-13 [SCSI] [Macintosh internals]...
3. Parallel SCSI: Parallel SCSI (formally, SCSI Parallel Interface, or SPI) is the earliest of the interface implementations in the SCSI family. SPI is a parallel bus; there is one set of electrical connections stretching from one end of the SCSI bus to ... (Original SCSI storage interface) [70%] 2023-12-21 [SCSI]
4. SCSI CDB: In SCSI standards for transferring data between computers and peripheral devices, often computer storage, commands are sent in a Command Descriptor Block (CDB). Each CDB can be a total of 6, 10, 12, or 16 bytes, but later versions of ... (Engineering) [70%] 2023-07-16 [SCSI]
5. Parallel SCSI: Parallel SCSI (formally, SCSI Parallel Interface, or SPI) is the earliest of the interface implementations in the SCSI family. SPI is a parallel bus; there is one set of electrical connections stretching from one end of the SCSI bus to ... (Engineering) [70%] 2023-01-21 [SCSI]
6. SCSI connector: A SCSI connector (/ˈskʌzi/ SKUZ-ee) is used to connect computer parts that use a system called SCSI to communicate with each other. Generally, two connectors, designated male and female, plug together to form a connection which allows two components ... (Engineering) [70%] 2023-06-18 [SCSI] [Computer connectors]...
7. SCSI command: In SCSI computer storage, computers and storage devices use a client-server model of communication. The computer is a client which requests the storage device to perform a service, e.g., to read or write data. (Engineering) [70%] 2023-11-29 [SCSI]
8. USB Attached SCSI: USB Attached SCSI (UAS) or USB Attached SCSI Protocol (UASP) is a computer protocol used to move data to and from USB storage devices such as hard drives (HDDs), solid-state drives (SSDs), and thumb drives. UAS depends on the ... (Engineering) [57%] 2023-08-03 [SCSI] [Computer storage buses]...
9. SCSI mode page: SCSI target devices provide a number of SCSI mode pages. These can be interrogated by a MODE SENSE command and set by a MODE SELECT command. (Engineering) [57%] 2022-08-13 [SCSI]
10. SCSI Enclosure Services: SCSI Enclosure Services (SES) is a protocol for more modern SCSI enclosure products. An initiator can communicate with the enclosure using a specialized set of SCSI commands to access power, cooling, and other non-data characteristics. [57%] 2023-12-28 [Computer data storage] [Computer hardware tuning]...
11. SCSI Trade Association: The SCSI Trade Association, or SCSITA (sometimes STA), is an industry trade group which exists to promote the use of SCSI technology. It was formed in 1996. (Organization) [57%] 2023-12-20 [SCSI] [Technology trade associations]...
12. SCSI Status Code: A SCSI Status Code is used to determine the success or failure of a SCSI command. At the end of any command, the target returns a Status Code byte which should be one of the following: This status code indicates ... (Engineering) [57%] 2022-10-31 [SCSI]
13. SCSI element codes: SCSI Enclosure Services (SES) devices contains a number of elements, each of which is defined by a one byte SCSI element code. There are many different element codes defined to cover various devices as shown in the list below. (Engineering) [57%] 2023-07-12 [SCSI]
14. SCSI Trade Association: The SCSI Trade Association, or SCSITA (sometimes STA), is an industry trade group which exists to promote the use of SCSI technology. It was formed in 1996. [57%] 2023-12-19 [SCSI] [Technology trade associations]...
15. SCSI diagnostic pages: SCSI target devices provide a number of SCSI diagnostic pages. These can be used by a Send Diagnostic command to tell a target device to run a specialised self-test. (Engineering) [57%] 2023-07-22 [SCSI]
16. Serial Attached SCSI: Serial Attached SCSI (SAS) es una interfaz de transferencia sepi de transferencia de datos en serie, sucesor del Small Computer System Interface (SCSI) paralelo, aunque sigue utilizando comandos SCSI para interaccionar con los dispositivos SAS. Aumenta la velocidad y permite ... [57%] 2024-02-15
17. SCSI terminating resistor: SCSI terminating resistors are electrical resistors that absorb signals that reach the end of the bus (computing). Without them signals could reflect back onto the bus causing a confusing mix of actual and reflected signals. (Engineering) [57%] 2022-07-15 [SCSI]
18. SCSI check condition: In computer terminology, a Check Condition occurs when a SCSI device needs to report an error. SCSI communication takes place between an initiator and a target. [57%] 2022-09-05 [SCSI]
19. SCSI log pages: SCSI target devices provide a number of SCSI log pages. These can be interrogated by a Log Sense command and in some cases can be set by a Log Select command. (Engineering) [57%] 2022-10-16 [SCSI]
20. SCSI architectural model: The SCSI architectural model provides an abstract view of the way that SCSI devices communicate. It is intended to show how the different SCSI standards are inter-related. (Engineering) [57%] 2024-02-17 [SCSI]
21. SCSI Pass-Through Direct: SCSI Pass Through Direct (SPTD) is a proprietary device driver and application programming interface (API) that provides a method of access to SCSI storage devices. Originally developed in 2004 by Duplex Secure Ltd., it is now owned and maintained by ... [57%] 2025-01-27 [Application programming interfaces] [SCSI]...
22. SCSI architectural model: The SCSI architectural model provides an abstract view of the way that SCSI devices communicate. It is intended to show how the different SCSI standards are inter-related. [57%] 2025-05-13 [SCSI]
23. SCSI Pass Through Interface: SCSI Pass Through Interface (SPTI) is an application programming interface (API) accessing a SCSI device. It is developed by Microsoft Corporation and is part of the Windows NT family of operating systems. [50%] 2022-10-08 [Application programming interfaces] [SCSI]...
24. Advanced SCSI Programming Interface: ASPI (Advanced SCSI Programming Interface, sinngemäß Erweiterte SCSI-Programmierschnittstelle) ist eine Programmierschnittstelle für die einheitliche Ansteuerung von CD-ROM- bzw. DVD-Laufwerken, insbesondere Brennern unter den Betriebssystemen MS-DOS, Windows, OS/2 und Netware. [50%] 2024-01-19
25. SCSI Peripheral Device Type: A SCSI Peripheral Device Type describes the capabilities provided by a SCSI device. It is a five-bit field in the first byte returned in response to an INQUIRY SCSI command. (Engineering) [50%] 2023-06-29 [SCSI]
26. SCSI Pass Through Interface: SCSI Pass Through Interface (SPTI) is an application programming interface (API) accessing a SCSI device. It is developed by Microsoft Corporation and is part of the Windows NT family of operating systems. (Software) [50%] 2023-10-19 [Application programming interfaces] [SCSI]...
27. Advanced SCSI Programming Interface: In computing, ASPI (Advanced SCSI Programming Interface) is an Adaptec-developed programming interface which standardizes communication on a computer bus between a SCSI driver module on the one hand and SCSI (and ATAPI) peripherals on the other. The ASPI manager ... (Computer software for connecting SCSI devices) [50%] 2023-12-22 [Application programming interfaces] [SCSI]...
28. SCSI high byte termination: In SCSI computer systems, there is a special case with mixed 8-bit and 16-bit devices where high-byte termination may be required. Most parallel SCSI buses are terminated at each end. (Engineering) [50%] 2023-09-20 [SCSI]
29. SCSI initiator and target: In computer data storage, a SCSI initiator is the endpoint that initiates a SCSI session, that is, sends a SCSI command. The initiator usually does not provide any Logical Unit Numbers (LUNs). [50%] 2024-04-18 [SCSI] [Computer storage devices]...
30. Advanced SCSI Programming Interface: In computing, ASPI (Advanced SCSI Programming Interface) is an Adaptec-developed programming interface which standardizes communication on a computer bus between a SCSI driver module on the one hand and SCSI (and ATAPI) peripherals on the other. The ASPI manager ... (Computer software for connecting SCSI devices) [50%] 2024-07-27 [Application programming interfaces] [SCSI]...
31. LIO (SCSI target): In computing, Linux-IO (LIO) Target is an open-source implementation of the SCSI target that has become the standard one included in the Linux kernel. Internally, LIO does not initiate sessions, but instead provides one or more Logical Unit ... (Software) [57%] 2024-01-01 [SCSI] [Linux]...