Lanthanum(III) iodide
|
| Names
|
| Other names
Lanthanum triiodide
|
| Identifiers
|
|
|
|
|
|
|
| EC Number
|
|
|
|
|
InChI=1S/3HI.La/h3*1H;/q;;;+3/p-3 Key: KYKBXWMMXCGRBA-UHFFFAOYSA-K
|
|
|
| Properties
|
|
|
LaI3
|
| Molar mass
|
519.62
|
| Density
|
5.63 g/mL at 25 °C
|
| Melting point
|
772 °C (1,422 °F; 1,045 K)
|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
| Infobox references
|
|
|
|
Lanthanum(III) iodide is an inorganic compound containing lanthanum and iodine with the chemical formula LaI3.[1]
Synthesis
Lanthanum(III) iodide can be synthesised by the reaction of lanthanum metal with mercury(II) iodide:[2][3]
- 2 La + 3 HgI2 → 2 LaI3 + 3 Hg
It can also be prepared from the elements, that is by the reaction of metallic lanthanum with iodine:[2]
- 2 La + 3 I2 → 2 LaI3
While lanthanum(III) iodide solutions can be generated by dissolving lanthanum oxide in hydroiodic acid, the product will hydrolyse and form polymeric hydroxy species:[4]
- La2O3 + 6 HI → 2 LaI3 + 3 H2O → further reactions
Structure
Lanthanum(III) iodide adopts the same crystal structure as plutonium(III) bromide, with 8-coordinate metal centres arranged in layers.[4][5] This orthorhombic structure is typical of the triiodides of the lighter lanthanides (La–Nd), whereas heavier lanthanides tend to adopt the hexagonal bismuth(III) iodide structure.[3]
Reactivity and applications
Lanthanum(III) iodide is very soluble in water and is deliquescent.[4] Anhydrous lanthanum(III) iodide reacts with tetrahydrofuran to form a photoluminescent complex, LaI3(THF)4, with an average La–I bond length of 3.16 Å.[6][7] This complex is a starting material for amide and cyclopentadienyl complexes of lanthanum.[6][8]
Related compounds
Lanthanum also forms a diiodide, LaI2. It is an electride and is best formulated {LaIII,2I−,e−}, with the electron delocalised in a conduction band.[4] Several other lanthanides form similar compounds, including CeI2, PrI2 and GdI2.[9] Lanthanum diiodide adopts the same tetragonal crystal structure as PrI2.[10]
Lanthanum(III) iodide reacts with lanthanum metal under an argon atmosphere in a tantalum capsule at 1225 K to form the mixed-valence compound La2I5.[11]
Reduction of LaI2 or LaI3 with metallic sodium in an argon atmosphere at 550 °C gives lanthanum monoiodide, LaI, which has a hexagonal crystal structure.[12]
References
- ↑ Taylor, Moddie D. (1962). "Preparation of Anhydrous Lanthanon Halides". Chem. Rev. 62 (6): 503–511. doi:10.1021/cr60220a001.
- ↑ 2.0 2.1 Corbett, John D.; Simon, Arndt (1984). "Chapter 6: Lanthanum Triiodide (and Other Rare Earth Metal Triiodides)". in Holt Jr., Smith L.. Inorg. Synth.. 22. pp. 11–16. doi:10.1002/9780470132531.ch6.
- ↑ 3.0 3.1 Asprey, L. B.; Keenan, T. K.; Kruse, F. H. (1964). "Preparation and Crystal Data for Lanthanide and Actinide Triiodides". Inorg. Chem. 3 (8): 1137–1141. doi:10.1021/ic50018a015. https://digital.library.unt.edu/ark:/67531/metadc867868/.
- ↑ 4.0 4.1 4.2 4.3 Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. pp. 949–950. ISBN 978-0-08-037941-8.
- ↑ Wells, A. F. (1984). Structural Inorganic Chemistry (5th ed.). Oxford University Press. p. 420. ISBN 978-0-19-965763-6.
- ↑ 6.0 6.1 Ortu, Fabrizio (2022). "Rare Earth Starting Materials and Methodologies for Synthetic Chemistry". Chem. Rev. 122 (6): 6040–6116. doi:10.1021/acs.chemrev.1c00842. PMID 35099940.
- ↑ Li, Yangjuan; Chen, Xiuting; Gong, Yu (2021). "Photoluminescence of LaI3 switched on and off by association and dissociation of non-luminescent tetrahydrofuran". Dalton Trans. 50 (11): 3797–3800. doi:10.1039/D1DT00162K. PMID 33720234.
- ↑ Windorff, Cory J.; Dumas, Megan T.; Ziller, Joseph W.; Gaunt, Andrew J.; Kozimor, Stosh A.; Evans, William J. (2017). "Small-Scale Metal-Based Syntheses of Lanthanide Iodide, Amide, and Cyclopentadienyl Complexes as Analogues for Transuranic Reactions". Inorg. Chem. 56 (19): 11981–11989. doi:10.1021/acs.inorgchem.7b01968. PMID 28915015.
- ↑ Wells, A. F. (1984). Structural Inorganic Chemistry (5th ed.). Oxford University Press. p. 1250. ISBN 978-0-19-965763-6.
- ↑ Burrow, J. H.; Maule, C. H.; Strange, P.; Tothill, J. N.; Wilson, J. A. (1987). "The electronic conditions in the 5d1 layer-metal LaI2 making comparison with the iso-electronic tantalum dichalcogenides, with the other RE di-iodides, and with the RE monochalcogenides". J. Phys. C: Solid State Phys. 20 (26): 4115–4133. doi:10.1088/0022-3719/20/26/014. Bibcode: 1987JPhC...20.4115B.
- ↑ Mattausch, Hj.; Oeckler, O.; Simon, A. (2003). "Crystal structure of dilanthanum pentaiodide, La2I5". Z. Kristallogr. NCS 218 (3): 281. doi:10.1524/ncrs.2003.218.3.281.
- ↑ Ryazanov, Mikhail; Kienle, Lorenz; Simon, Arndt; Mattausch, Hansjürgen (2006). "New Synthesis Route to and Physical Properties of Lanthanum Monoiodide". Inorg. Chem. 45 (5): 2068–2074. doi:10.1021/ic051834r. PMID 16499368.
| HI
|
|
|
|
He
|
| LiI
|
BeI2
|
BI3
|
CI4
|
NI3
|
I2O4, I2O5, I4O9
|
IF, IF3, IF5, IF7
|
Ne
|
| NaI
|
MgI2
|
AlI3
|
SiI4
|
PI3, P2I4
|
S
|
ICl, ICl3
|
Ar
|
| KI
|
CaI2
|
Sc
|
TiI4
|
VI3
|
CrI3
|
MnI2
|
FeI2
|
CoI2
|
NiI2
|
CuI
|
ZnI2
|
Ga2I6
|
GeI2, GeI4
|
AsI3
|
Se
|
IBr
|
Kr
|
| RbI
|
SrI2
|
YI3
|
ZrI4
|
NbI5
|
Mo
|
Tc
|
Ru
|
Rh
|
Pd
|
AgI
|
CdI2
|
InI3
|
SnI4, SnI2
|
SbI3
|
TeI4
|
I
|
Xe
|
| CsI
|
BaI2
|
|
HfI4
|
TaI5
|
W
|
Re
|
Os
|
Ir
|
Pt
|
AuI
|
Hg2I2, HgI2
|
TlI
|
PbI2
|
BiI3
|
Po
|
AtI
|
Rn
|
| Fr
|
RaI2
|
|
Rf
|
Db
|
Sg
|
Bh
|
Hs
|
Mt
|
Ds
|
Rg
|
Cn
|
Nh
|
Fl
|
Mc
|
Lv
|
Ts
|
Og
|
|
|
↓
|
|
|
| La
|
Ce
|
Pr
|
Nd
|
Pm
|
SmI2
|
Eu
|
Gd
|
TbI3
|
Dy
|
Ho
|
Er
|
Tm
|
Yb
|
Lu
|
| Ac
|
ThI4
|
Pa
|
UI3, UI4
|
Np
|
Pu
|
Am
|
Cm
|
Bk
|
Cf
|
EsI3
|
Fm
|
Md
|
No
|
Lr
|
 | Original source: https://en.wikipedia.org/wiki/Lanthanum(III) iodide. Read more |